How To Stop Job If Runs For More Then Specified Time?
Nov 14, 2007Friends, I have one job running for more then esteemeted hours. I would like to stop the job if it runs for more then 30 mins. What I need to do for that? Thanks.
View 1 Replies
ADVERTISEMENT
Script Runs Fine Second Time (was Need Help....)
Apr 1, 2007Hi Guys and Gals...
I have a script that runs every night to pull some data from Delphi. For some strange reason the past month it has been failing on the inital running of the script but when I close off all of the error boxes and hit the script again it runs just fine.... Please find enclosed the script . Can anyone tell me whe it is wrong... thanks in advance
What Is The Best Way To Record The Time A Package Runs?
Dec 11, 2007
Dear all,
This is a beginner's question so bear with me - I have a SSIS package that builds an Analysis Services fact table - depending on user input, this table is either re-built from scratch or any additional records since it was last run are created.
Where is the best place to store the time a package was last run - in a seperate table in the database or somewhere in the fact table?
Sam
Clean Up Data - When Process Runs Next Time
Jul 25, 2006
In a integration project I am moving data from A to B.
First time is fine - since table B is empty.
However next time I run the process, I would like to delete all records in B before I run the project again.
What is the best way to delete / clean up data when you re run the process ?
Cheers, T
Stop Time Duration Problem
Jul 20, 2005I am working with a proprietary database that records the date, time,location, and speed of a vehicle. It is pulling this information fromGPS unit tied to a vehicle. The table is populated with values thatare pulled from the GPS unit every 30 seconds. I need to find theduration of time for when a vehicle is stopped. I have created acursor that runs though all of the tables, and gathers the data forwhen the vehicle's speed is equal to zero. I have inserted this datainto a temp table, where I am having a problem is identifying theduration of time the vehicle is stopped. I cannot figure out how toquery the table and grab the first row when the speed is zero and thelast row where the speed is zero.The data looks like this…Date TimeVehIDLatLongSpeed12/31/2003 66144 295708535220842.92747-83.63003012/31/2003 66159 295708535220842.92696-83.62935012/31/2003 66179 295708535220842.9271 -83.62902 012/31/2003 66269 295708535220842.92709-83.62903012/31/2003 66359 295708535220842.9271 -83.62901012/31/2003 66449 295708535220842.92709-83.62904012/31/2003 66539 295708535220842.92708-83.62903012/31/2003 66629 295708535220842.92708-83.629 012/31/2003 66719 295708535220842.92708-83.62903012/31/2003 67414 295708535220842.9269 -83.630920Any help would be greatly appreciated…Thanks,Dave
View 5 Replies View RelatedHow To START And Stop Profiler At Specific Time
Feb 25, 2004Hi,
We want trace ALL activity on prod
server between 3:00 AM and 3:15 AM
Profiler has stop time option ,but
no start option.
I am looking for example how it could be done
Thank you
Alex
Query Runs In Sub Second Time Until I Put It In A Stored Procedure Then It Takes 2 Minutes.
Jun 25, 2007The query below runs in sub second time if I don't call it as a stored procedure. I have looked at the execution plan for both the query and the query as a stored procedure and they are the same.
When I put the query into a stored procedure it takes over 2 minutes to run.
All feedback (even the ugly stuff) is more than welcome. I want to master this issue and forever put it behind me.
This is the sql when I just execute it outright:1 DECLARE
2 @WebUserID nvarchar(20)
3 ,@DocumentTypeID int
4 ,@RouteID nvarchar(10)
5 ,@CustomerID nvarchar(15)
6 ,@DocumentIDPrefix nvarchar(20)
7 ,@StartDate datetime
8 ,@EndDate datetime
9 ,@OversoldOnly bit
10 ,@DexCustomersOnly bit
11 ,@DeviationsOnly bit
12 ,@CashNoPaymentOnly bit
13 ,@SignatureName nvarchar(45)
14 ,@SortExpression varchar(200)
15 ,@StartRowIndex int
16 ,@MaximumRows int
17
18 SET @WebUserID = 'manager'
19 SET @DocumentTypeID = 0
20 SET @DocumentIDPrefix = '%'
21 SET @StartDate = '04/17/2007'
22 SET @EndDate = '04/19/2007'
23 SET @OversoldOnly = 0
24 SET @DexCustomersOnly = 0
25 SET @DeviationsOnly = 0
26 SET @CashNoPaymentOnly = 0
27 SET @SortExpression = ''
28 SET @StartRowIndex = 0
29 SET @MaximumRows = 20;
30
31 WITH OrderedDocumentHistory AS
32 (
33 SELECT
34 dh.DocumentHistoryID
35 ,dh.DocumentID
36 ,dh.DocumentTypeID
37 ,dh.DocumentTypeDesc
38 ,dh.RouteID
39 ,dh.RouteDesc
40 ,dh.CustomerID
41 ,dh.CustomerName
42 ,dh.DocDate
43 ,ISNULL(dc.HasReceipt, 0) AS 'HasReceipt'
44 ,ddt.Description AS 'SignatureReason'
45 ,a.Amount
46 ,ROW_NUMBER() OVER (ORDER BY dh.DocDate DESC) AS 'RowNumber'
47 FROM
48 DocumentHistory dh
49 INNER JOIN Customers c ON dh.CustomerID = c.CustomerID
50 INNER JOIN DeviationTypes ddt ON dh.DriverDeviationTypeID = ddt.DeviationTypeID
51 INNER JOIN
52 (
53 SELECT
54 DocumentHistoryID
55 ,(COALESCE(SUM((CONVERT(INT, Units + DeviationUnits)) * (UnitPrice - UnitDiscount)) + SUM((CONVERT(INT, Cases + DeviationCases)) * (CasePrice - CaseDiscount)), 0.0)) AS Amount
56 FROM
57 DocumentHistoryItems dhia
58 GROUP BY
59 dhia.DocumentHistoryID
60 ) AS a ON a.DocumentHistoryID = dh.DocumentHistoryID
61 LEFT OUTER JOIN
62 (
63 SELECT DISTINCT
64 dca.DocumentID
65 ,1 AS 'HasReceipt'
66 FROM
67 DocumentCollections dca
68 ) AS dc ON dh.DocumentID = dc.DocumentID
69 WHERE
70 dh.DocDate BETWEEN @StartDate AND @EndDate
71 AND (dh.DocumentTypeID = @DocumentTypeID OR @DocumentTypeID IS NULL)
72 AND (dh.RouteID = @RouteID OR @RouteID IS NULL)
73 AND (dh.CustomerID = @CustomerID OR @CustomerID IS NULL)
74 AND dh.DocumentID LIKE @DocumentIDPrefix
75 AND CASE WHEN @OversoldOnly = 1 THEN ISNULL( (SELECT TOP 1 (dhio.DeviationUnits + dhio.DeviationCases) FROM DocumentHistoryItems dhio WHERE dh.DocumentHistoryID = dhio.DocumentHistoryID AND (dhio.DeviationUnits > 0 OR dhio.DeviationCases > 0)), 0) ELSE 1 END > 0
76 AND CASE WHEN @DexCustomersOnly = 1 THEN c.DEXEnable ELSE 'Y' END = 'Y'
77 AND CASE WHEN @DeviationsOnly = 1 THEN ISNULL( (SELECT TOP 1 (dhio.DeviationUnits + dhio.DeviationCases) FROM DocumentHistoryItems dhio WHERE dh.DocumentHistoryID = dhio.DocumentHistoryID AND (dhio.DeviationUnits != 0 OR dhio.DeviationCases != 0)), 0) ELSE 1 END != 0
78 AND CASE WHEN @CashNoPaymentOnly = 1 THEN dh.Terms ELSE 'CHECK/CASH' END = 'CHECK/CASH'
79 AND CASE WHEN @CashNoPaymentOnly = 1 THEN (SELECT MAX(dhio.AlcoholPct) FROM DocumentHistoryItems dhio WHERE dhio.DocumentHistoryID = dh.DocumentHistoryID) ELSE 1 END > 0
80 AND CASE WHEN @CashNoPaymentOnly = 1 THEN ISNULL(dc.HasReceipt, 0) ELSE 0 END = 0
81 AND (dh.SigName = @SignatureName OR @SignatureName IS NULL)
82 AND (c.WarehouseID IN (SELECT WarehouseID FROM WebUserWarehouses WHERE WebUserID = @WebUserID)
83 OR @WebUserID IS NULL)
84 )
85
86 SELECT
87 DocumentHistoryID
88 ,DocumentID
89 ,DocumentTypeDesc
90 ,RouteID
91 ,RouteDesc
92 ,CustomerID
93 ,CustomerName
94 ,DocDate
95 ,Amount
96 ,HasReceipt
97 ,SignatureReason
98 FROM
99 OrderedDocumentHistory
100 WHERE
101 RowNumber BETWEEN (@StartRowIndex + 1) AND (@StartRowIndex + @MaximumRows) Here is the sql for creating the stored procedure. 1 CREATE Procedure w_DocumentHistory_Select
2 (
3 @WebUserID nvarchar(20)
4 ,@DocumentTypeID int
5 ,@RouteID nvarchar(10)
6 ,@CustomerID nvarchar(15)
7 ,@DocumentIDPrefix nvarchar(20)
8 ,@StartDate datetime
9 ,@EndDate datetime
10 ,@OversoldOnly bit
11 ,@DexCustomersOnly bit
12 ,@DeviationsOnly bit
13 ,@CashNoPaymentOnly bit
14 ,@SignatureName nvarchar(45)
15 ,@SortExpression varchar(200)
16 ,@StartRowIndex int
17 ,@MaximumRows int
18 )
19 AS
20 SET NOCOUNT ON
21
22 IF LEN(@SortExpression) = 0 OR @SortExpression IS NULL
23 SET @SortExpression = 'Number DESC'
24
25 IF @StartRowIndex IS NULL
26 SET @StartRowIndex = 0
27
28 IF @MaximumRows IS NULL
29 SELECT
30 @MaximumRows = COUNT(dh.DocumentHistoryID)
31 FROM
32 DocumentHistory dh;
33
34 WITH OrderedDocumentHistory AS
35 (
36 SELECT
37 dh.DocumentHistoryID
38 ,dh.DocumentID
39 ,dh.DocumentTypeID
40 ,dh.DocumentTypeDesc
41 ,dh.RouteID
42 ,dh.RouteDesc
43 ,dh.CustomerID
44 ,dh.CustomerName
45 ,dh.DocDate
46 ,ISNULL(dc.HasReceipt, 0) AS 'HasReceipt'
47 ,ddt.Description AS 'SignatureReason'
48 ,a.Amount
49 ,CASE
50 WHEN @SortExpression = 'Number DESC' THEN (ROW_NUMBER() OVER (ORDER BY dh.DocumentID DESC))
51 WHEN @SortExpression = 'Number ASC' THEN (ROW_NUMBER() OVER (ORDER BY dh.DocumentID ASC))
52 WHEN @SortExpression = 'CustomerName DESC' THEN (ROW_NUMBER() OVER (ORDER BY dh.CustomerName DESC))
53 WHEN @SortExpression = 'CustomerName ASC' THEN (ROW_NUMBER() OVER (ORDER BY dh.CustomerName ASC))
54 WHEN @SortExpression = 'CompletedDate DESC' THEN (ROW_NUMBER() OVER (ORDER BY dh.DocDate DESC))
55 WHEN @SortExpression = 'CompletedDate ASC' THEN (ROW_NUMBER() OVER (ORDER BY dh.DocDate ASC))
56 WHEN @SortExpression = 'RouteDescription DESC' THEN (ROW_NUMBER() OVER (ORDER BY dh.RouteDesc DESC))
57 WHEN @SortExpression = 'RouteDescription ASC' THEN (ROW_NUMBER() OVER (ORDER BY dh.RouteDesc ASC))
58 END AS 'RowNumber'
59 FROM
60 DocumentHistory dh
61 INNER JOIN Customers c ON dh.CustomerID = c.CustomerID
62 INNER JOIN DeviationTypes ddt ON dh.DriverDeviationTypeID = ddt.DeviationTypeID
63 INNER JOIN
64 (
65 SELECT
66 DocumentHistoryID
67 ,(COALESCE(SUM((CONVERT(INT, Units + DeviationUnits)) * (UnitPrice - UnitDiscount)) + SUM((CONVERT(INT, Cases + DeviationCases)) * (CasePrice - CaseDiscount)), 0.0)) AS Amount
68 FROM
69 DocumentHistoryItems dhia
70 GROUP BY
71 dhia.DocumentHistoryID
72 ) AS a ON a.DocumentHistoryID = dh.DocumentHistoryID
73 LEFT OUTER JOIN
74 (
75 SELECT DISTINCT
76 dca.DocumentID
77 ,1 AS 'HasReceipt'
78 FROM
79 DocumentCollections dca
80 ) AS dc ON dh.DocumentID = dc.DocumentID
81 WHERE
82 dh.DocDate BETWEEN @StartDate AND @EndDate
83 AND (dh.DocumentTypeID = @DocumentTypeID OR @DocumentTypeID IS NULL)
84 AND (dh.RouteID = @RouteID OR @RouteID IS NULL)
85 AND (dh.CustomerID = @CustomerID OR @CustomerID IS NULL)
86 AND dh.DocumentID LIKE @DocumentIDPrefix
87 AND CASE WHEN @OversoldOnly = 1 THEN ISNULL( (SELECT TOP 1 (dhio.DeviationUnits + dhio.DeviationCases) FROM DocumentHistoryItems dhio WHERE dh.DocumentHistoryID = dhio.DocumentHistoryID AND (dhio.DeviationUnits > 0 OR dhio.DeviationCases > 0)), 0) ELSE 1 END > 0
88 AND CASE WHEN @DexCustomersOnly = 1 THEN c.DEXEnable ELSE 'Y' END = 'Y'
89 AND CASE WHEN @DeviationsOnly = 1 THEN ISNULL((SELECT TOP 1 (dhio.DeviationUnits + dhio.DeviationCases) FROM DocumentHistoryItems dhio WHERE dh.DocumentHistoryID = dhio.DocumentHistoryID AND (dhio.DeviationUnits != 0 OR dhio.DeviationCases != 0)), 0) ELSE 1 END != 0
90 AND CASE WHEN @CashNoPaymentOnly = 1 THEN dh.Terms ELSE 'CHECK/CASH' END = 'CHECK/CASH'
91 AND CASE WHEN @CashNoPaymentOnly = 1 THEN (SELECT MAX(dhio.AlcoholPct) FROM DocumentHistoryItems dhio WHERE dhio.DocumentHistoryID = dh.DocumentHistoryID) ELSE 1 END > 0
92 AND CASE WHEN @CashNoPaymentOnly = 1 THEN ISNULL(dc.HasReceipt, 0) ELSE 0 END = 0
93 AND (dh.SigName = @SignatureName OR @SignatureName IS NULL)
94 AND (c.WarehouseID IN (SELECT WarehouseID FROM WebUserWarehouses WHERE WebUserID = @WebUserID)
95 OR @WebUserID IS NULL)
96 )
97 SELECT
98 DocumentHistoryID
99 ,DocumentID
100 ,DocumentTypeDesc
101 ,RouteID
102 ,RouteDesc
103 ,CustomerID
104 ,CustomerName
105 ,DocDate
106 ,Amount
107 ,HasReceipt
108 ,SignatureReason
109 FROM
110 OrderedDocumentHistory
111 WHERE
112 RowNumber BETWEEN (@StartRowIndex + 1) AND (@StartRowIndex + @MaximumRows)
Here is the code for calling the stored procedure:1 DECLARE @RC int
2 DECLARE @WebUserID nvarchar(20)
3 DECLARE @DocumentTypeID int
4 DECLARE @RouteID nvarchar(10)
5 DECLARE @CustomerID nvarchar(15)
6 DECLARE @DocumentIDPrefix nvarchar(20)
7 DECLARE @StartDate datetime
8 DECLARE @EndDate datetime
9 DECLARE @OversoldOnly bit
10 DECLARE @DexCustomersOnly bit
11 DECLARE @DeviationsOnly bit
12 DECLARE @CashNoPaymentOnly bit
13 DECLARE @SignatureName nvarchar(45)
14 DECLARE @SortExpression varchar(200)
15 DECLARE @StartRowIndex int
16 DECLARE @MaximumRows int
17
18 SET @WebUserID = 'manager'
19 SET @DocumentTypeID = 0
20 SET @DocumentIDPrefix = '%'
21 SET @StartDate = '04/17/2007'
22 SET @EndDate = '04/19/2007'
23 SET @OversoldOnly = 0
24 SET @DexCustomersOnly = 0
25 SET @DeviationsOnly = 0
26 SET @CashNoPaymentOnly = 0
27 SET @SortExpression = ''
28 SET @StartRowIndex = 0
29 SET @MaximumRows = 20;
30
31 EXECUTE @RC = [Odom].[dbo].[w_DocumentHistory_Select]
32 @WebUserID
33 ,@DocumentTypeID
34 ,@RouteID
35 ,@CustomerID
36 ,@DocumentIDPrefix
37 ,@StartDate
38 ,@EndDate
39 ,@OversoldOnly
40 ,@DexCustomersOnly
41 ,@DeviationsOnly
42 ,@CashNoPaymentOnly
43 ,@SignatureName
44 ,@SortExpression
45 ,@StartRowIndex
46 ,@MaximumRows
Scheduled Package Runs Longer Time Than Manually Start The Job
May 16, 2008Hi,
I have a package designed as bring data tables over to SQL Server. There are 9 data flow tasks that runs parallel, to bring 9 datatables over. In BIDS, when I execute the package, it runs like 8 minutes. Or if I start the scheduled job manually, it runs around 8 minutes too. But it runs about 30 minutes at the scheduled time at midnight.
I wonder what I can do to speed up the scheduled job.
Thanks
SQL Server 2012 :: Cursor Stop Query At Specific Time?
Oct 29, 2015This store procedure will get some executable queries from the select statement, the cursor will fetch each rows to execute the query and insert the queries into table_3 to mark as 'E'. Until 17:00, this store procedure will stop execute the queries and just get the queries from select statement insert into table_3 to mark as 'C'.
I don't know why the outputs in table_3 are quiet different than I think. This store procedure comes out with two exactly same queries and one marked as C and another marked as E.
CREATE PROCEDURE procedure1
AS
DECLARE cursor_1 CURSOR FOR
SELECT
'This is a executable query'
FROM table_1
DECLARE @table_2
[code]....
SQL Server Admin 2014 :: Cursor Stop Query At Specific Time
Oct 29, 2015This store procedure will get some executable queries from the select statement, the cursor will fetch each rows to execute the query and insert the queries into table_3 to mark as 'E'. Until 17:00, this store procedure will stop execute the queries and just get the queries from select statement insert into table_3 to mark as 'C'.
I don't know why the outputs in table_3 are quiet different than I think. This store procedure comes out with two exactly same queries and one marked as C and another marked as E.
CREATE PROCEDURE procedure1
AS
DECLARE cursor_1 CURSOR FOR
SELECT
'This is a executable query'
FROM table_1
DECLARE @table_2
DECLARE @stoptime DATETIME = NULL;
[Code] ....
A Procedure Runs Slow As A Job But Runs Fast Executed In A Query Window
Apr 23, 2008Performance issue.
I have a very complex Stored Procedure called by a Job that is Scheduled to run every night.
It's execution takes sometimes 1 or 2 hours and sometimes 7 hours or more.
So, if it is running for more than 4 hours I stop the Job and I run the procedure from a Query Window and it never takes more than 2 hours.
Can anyone help me identify the problem ? I want to run from the Job and not to worry about it.
Some more information:
- It is SQL 2000 Enterprise with SP4 in a Cluster (It happens the same way in any node).
- The SQL Server and SQL Agent services run using a Domain Account that have full Administrative access.
- When I connect to a Query Window I also use a Windows Account.
- There is no locks or process bloking or being blocked while the job is running.
- Using the Task Manager the processor activity is ok, no more than 30 % in any processor.
Stored Procedure Just Runs And Runs
Oct 9, 2001I have a stored proceedure (which I will tag on at the end for those interested) which is taking at least 15 minutes to run when executed, but completes in 1 minute when the tsql statement is run in Query Analyser. Why is this?
I suspect that it may be connected to table indexing, but why then is this bypassed when QA is used?
Any advice appreciated.
Derek
************************************************** ***********************
IF EXISTS (SELECT * FROM sysobjects WHERE id = object_id(N'dbo.sp_ValidateAIGL') AND OBJECTPROPERTY(id, N'IsProcedure') = 1)
DROP PROCEDURE dbo.sp_ValidateAIGL
GO
CREATE PROCEDURE dbo.sp_ValidateAIGL
@IGLPeriodIDInt,
@IGLProgramIDInt
AS
/* ************************************************** ************************
Name:sp_ValidateIGL
Author:CL
Date:19-Jan-2001
Notes:
************************************************** ************************ */
--SET NOCOUNT ON
DECLARE@TaxYearChar(5),
@FrequencyChar(1),
@PeriodNo Int,
@ProgramLogIDInt
SELECT@TaxYear = TaxYear,
@PeriodNo = PeriodNo,
@Frequency = Frequency
FROMtbl_IGLPeriods
WHEREIGLPeriodID = @IGLPeriodID
SELECT @ProgramLogID = (SELECT ProgramLogID FROM tbl_SYSProgramLogs WHERE IGLProgramID = @IGLProgramID AND IGLPeriodID = @IGLPeriodID)
CREATE TABLE #IGLErrors
(
KeyFieldChar(24),
ErrorIDInt,
DescriptionVarChar(255)
)
-- *** Global Non Program Specific Data Errors ***
-- CHECK - that there are records in the DEB_IGL_PAYROLL_OUTPUT file.....none and the routine failed...
IF NOT EXISTS(SELECT * FROM tbl_OUT_Payroll WHERE IGLProgramID = @IGLProgramID)
INSERT INTO #IGLErrors SELECT NULL, 100, 'No records were processed by the IGL run!'
SELECT * FROM #IGLErrors
-- CHECK - search for any records where the employee's EXPENSE_CODE is NULL
INSERT INTO #IGLErrors
SELECT DISTINCT
NULLIF(EmpNo, ''),
2,
'Employee "' + COALESCE(NULLIF(RTRIM(EmpNo), ''),
'<Missing Employee>') + '" (Organisation Unit - ' + COALESCE(RTRIM(OrgUnitCode),
'<No Organisation Unit>') + ') does not have a EXPENSE_CODE Code.'
FROM tbl_OUT_Payroll
WHERE NULLIF(ExpenseCode, '') IS NULL
ANDIGLProgramID = @IGLProgramID
SELECT * FROM #IGLErrors
-- CHECK - check that the BALANCE of DEBITs match the balance of CREDITs
IF (SELECT SUM(Cash) FROM tbl_OUT_Payroll WHERE IsCredit = 1 AND IGLProgramID = @IGLProgramID) <> (SELECT SUM(Cash) FROM tbl_OUT_Payroll WHERE IsCredit = 0 AND IGLProgramID = @IGLProgramID)
INSERT INTO #IGLErrors SELECT NULL, 3, 'The total cash value for DEBIT elements does not match the total cash for CREDIT elements.'
SELECT * FROM #IGLErrors
-- *** Program 1 and 2 errors ***
IF @IGLProgramID IN (1, 2)
BEGIN
-- CHECK - search for any records where the employee's COST_CENTRE is NULL
INSERT INTO #IGLErrors
SELECT DISTINCT
NULLIF(EmpNo, ''),
1,
'Employee "' + NULLIF(RTRIM(EmpNo), '') + '" (Organisation Unit = ' + RTRIM(OrgUnitCode) + ') does not have a COST_CENTRE Code.'
FROM tbl_OUT_Payroll
WHERE NULLIF(CostCenter, '') IS NULL
ANDIGLProgramID = @IGLProgramID
SELECT * FROM #IGLErrors
-- Check for EMPLOYEEs that were not transfered to the PAYROLL output (usually caused by missing ORG_UNITs or not picked up in
-- the DEB_VIEW_APPOINTEE view...)
INSERT INTO #IGLErrors
SELECT DISTINCT
EMP_NO,
11,
'Employee "' + RTRIM(EMP_NO) + '" was excluded from the summary. Check their Organisation Unit codes!'
FROM PSELive.dbo.COSTING_OUTPUT
WHERENOT EMP_NO IN (SELECT DISTINCT EmpNo FROM tbl_OUT_Payroll WHERE IGLProgramID = @IGLProgramID)
ANDPERIOD_NO = @PeriodNo
ANDTAX_YEAR = @TaxYear
SELECT * FROM #IGLErrors
-- Check that there are no ELEMENTS in the COSTING_OUTPUT table that don't exist in the tbl_IGLElements table
INSERT INTO #IGLErrors
SELECT DISTINCT
ELEMENT,
12,
'Element "' + RTRIM(ELEMENT) + '" does not exist in the IGL Interface Elements table!'
FROM PSELive.dbo.COSTING_OUTPUT
WHERE ELEMENT NOT IN
(
SELECT DISTINCT Element
FROM tbl_IGLElements
)
ANDPERIOD_NO = @PeriodNo
SELECT * FROM #IGLErrors
END
-- *** Add a error to indicate the number of errors ***
IF EXISTS (SELECT * FROM #IGLErrors)
INSERT INTO #IGLErrors
SELECT 0,
0,
'Warning, there are ' + CAST(Count(*) AS VarChar(5)) + ' recorded errors!'
FROM#IGLErrors
-- Transfer the records to the ErrorsLog table ready for the user to view...
DELETE FROM tbl_SYSErrorsLog
INSERT INTO tbl_SYSErrorsLog (IGLProgramID, OutputLogID, KeyField, ErrorID, Description)
SELECT@ProgramLogID,
@IGLPeriodID,
KeyField,
ErrorID,
Description
FROM #IGLErrors
ORDER BY ErrorID
DROP TABLE #IGLErrors
SELECT *
FROM tbl_SYSErrorsLog
ORDER BY ErrorID
--SET NOCOUNT OFF
GO
GRANT EXECUTE ON dbo.sp_ValidateAIGL TO Public
GO
How To Convert UTC Time (retrieved From SQL) To Local Time In Reporting Services Based On Time Zone
Aug 7, 2007
Hi all,
I have created a report in SSRS 2005 which is being viewed by users from different Time Zones.
I have a dataset which has a field of type datetime (UTC). Now I would like to display this Date according to the User Time Zone.
For example if the date is August 07, 2007 10:00 AM UTC,
then I would like to display it as August 07, 2007 03:30 PM IST if the user Time Zone is IST.
Similarly for other Time Zones it should display the time accordingly.
Is this possible in SSRS 2005?
Any pointers will be usefull...
Thanks in advance
sudheer racha.
Only One SSIS Job Runs...
Feb 12, 2007Hi,
Currently I have two SSIS jobs on my machine. The problem I'm having is, only one of the jobs executes succesfully, the other one fails for incorrect user login. Both jobs use the same configuration database and all the packages on both jobs have the protection level set to "DontSaveSensitive". Both jobs have been deployed in the exact same manner, yet only one succeceeds and the other fails.
Can anybody tell me why this is going on?
Vbs Script Runs As Standalone, But Not In Dts Or Sql Job
Jun 19, 2001I have a vbs script to try to prove that I can perform vbs scripting in either a job step or a dts package
The script is
dim rs, sql,adoconn, adocommand, dataconnstring
set adoconn = createObject("ADODB.CONNECTION")
Set rs = CreateObject("ADODB.Recordset")
set adocommand = CreateObject("ADODB.Command")
adoconn.ConnectionString = "Provider=SQLOLEDB;Server=myserver;Database=pubs;U id=myuser;Pwd=mypass;"
adoconn.Open
sql = "select * from import"
rs.Open sql, adoconn,adOpenForwardOnly
while rs.EOF = false
sql = "insert into zz default values"
adocommand.ActiveConnection = adoconn
adocommand.CommandText = sql
adocommand.Execute
rs.MoveNext
wend
rs.Close
adoconn.Close
set adoconn = nothing
However,
when I run this from windows explorer it works fine,
but when I try to run it as an activeX script, I get the error ActiveX scripting: Function not found
As a cmdexec step in a job, I use the line c:inetpubwwwrootvbsvbstest1.vbs
It failed with the error
The process could not be created for step 1 of job 0x119BDBD264AD9B4597A9302786F0E250 (reason: %1 is not a valid Win32 application). The step failed.
What is wrong with the vbs script ?, or do I need to invoke it a different way ?
thanks in advance
Can I Create A Job That Runs Other Jobs, Or.....
Aug 15, 2000I have jobs (DTS packages) for several different tasks that I would like to run sequentially, rather than trying to estimate how long each will take and schedule them individually.
Any suggestions?
Thanks,
Cara
HELP: Package Runs...job Fails!
Dec 18, 2000I'm trying to run a job which moves data from one machine to another. I can manually execute the package successfully, but the job always fails. I get the dreaded error message 18456, "login failis for user "". I have double checked the logins for both machines,(sql server agent AND the sql server authentication).
Also, I can run a select statement (from server_ to server_2) successfully from query analyzer i.e.
Select *
from <linked_server_name>.<database>.<database_owner>.<table_name>
however, if I run this query from server_2 to server_1 I get the failed login message similar to the error message found in the job history. Since both servers accept nt logins, where is my problem? They are both set up as linked servers, and they are both mssql oledb.
Any suggestions will be appreciated!
thanks
DTS Package Runs, But Not When Scheduled
Sep 15, 1999I have created a package that takes a Visual FoxPro .dbf and imports into SQL7. If I run the job, it works fine. If I schedule the job it fails stating that I can't find the .dbf, the same one that it just found when run manually. What gives?
View 1 Replies View RelatedProcedure Compiles And Runs But...!!!!!!!!!!!!
May 13, 2002My procedure compliles and runs. l 'm running it as 'exec Statement' it should prompt me for the start and end date but it does not. Where
have l gone wrong in my logic l've declared all the variables need. Please advice
if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[Statement]')
and OBJECTPROPERTY(id, N'IsProcedure') = 1)
drop procedure [dbo].[Statement]
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_NULLS ON
GO
Create Procedure Statement
As
Begin
declare @Startdate As datetime
declare @Enddate As datetime
declare @Customer_No As char(15)
declare @loanno As char(15)
declare @transaction_date As datetime
declare @transaction_type As char(3)
declare @reference As varchar(20)
declare @notes As varchar(255)
declare @transaction_amount As decimal (9,2)
declare @transaction_description As varchar(50)
declare @debit_amount As decimal (9,2)
declare @credit_amount As decimal (9,2)
declare @counter As int
declare @balance As decimal (9,2)
declare @user_changed As char(8)
declare c2 CURSOR FOR
SELECT loan_no
FROM loan
where customer_no = @Customer_No
ORDER BY loan_no
OPEN c2
FETCH NEXT FROM c2 INTO @loanno
-- Check @@FETCH_STATUS to see if there are any more rows to fetch.
WHILE @@FETCH_STATUS = 0
BEGIN
declare c1 CURSOR FOR
SELECT transaction_record.loan_no,
transaction_record.transaction_date,
transaction_record.transaction_type,
transaction_record.reference_no,
transaction_record.notes,
transaction_record.transaction_amount,
transaction_type.[description]
FROM transaction_record
inner join transaction_type
on transaction_type.transaction_type = transaction_record.transaction_type
where loan_no = @loanno and transaction_Date between @startdate and @enddate and transaction_amount <> 0
ORDER BY transaction_date
OPEN c1
FETCH NEXT FROM c1
INTO @transaction_date,
@transaction_type,
@reference,
@notes,
@transaction_amount,
@transaction_description
-- Check @@FETCH_STATUS to see if there are any more rows to fetch.
WHILE @@FETCH_STATUS = 0
BEGIN
If (@transaction_amount < 0)
Begin
set @credit_amount = @transaction_amount
set @debit_amount = 0
End
Else
Begin
set @debit_amount = @transaction_amount
set @credit_amount = 0
End
If (@counter = 0)
Begin
set @balance = @transaction_amount
End
Else
Begin
set @balance = @balance + @transaction_amount
End
insert into Statement (customer_no,loan_no,
transaction_date,transaction_type,transaction_desc ription,
reference, notes, debit_amount, credit_amount, balance,
user_changed, transaction_no)
Values (@Customer_No,
@loanno,
@transaction_date,
@transaction_type,
@transaction_description,
@reference,
@notes,
@debit_amount,
@credit_amount,
@balance,
@user_changed,
@counter)
set @counter = @counter+1
FETCH NEXT FROM c1
INTO @transaction_date,
@transaction_type,
@reference,
@notes,
@transaction_amount,
@transaction_description
End
CLOSE c1
DEALLOCATE c1
FETCH NEXT FROM c2 INTO @loanno
End
CLOSE c2
DEALLOCATE c2
END;
Go
UDF That Runs A Dynamic Query
Mar 11, 2008Good afternoon,
i'm new to Functions on the SQL server
I'm trying to create a dynamic query that would select the the column passed to the function from a certain table
my table called selected_Date, and has StartDate, and EndDate columns
when the user select for example "StartDate", i pass this as a variable to the function which runs the query. but i always gets back the passed string as a result..
here is my table
StartDate | EndDate
---------------------
20071231 | 20080306
here is my function knowing that i'm passing "Start" as a variable:
Code:
ALTER FUNCTION tu_efgn_int.Get_StartEndDates(@DateType varchar(10))
RETURNS varchar(8)
AS
BEGIN
DECLARE @vDate varchar(15)
Set @vDate= (Select @DateType + 'Date' From dbo.ps_tbl_SelectedDates)
RETURN @vDate
END
@vDate always returns "StartDate" as result instead of 20071231 why is that ?
Trigger Error When App Runs
Oct 5, 2005I have SQL Server 2000, and our web application is in WebObjects.
I built a trigger on a table that indicates if certain fields in a record have been changed since the last time a report was run from the application.
This trigger runs fine through the Query Analyzer, and runs fine with a direct input through enterprise manager. However, when the WebObjects application tries to update the table, and error is thrown.
Is anyone familiar with a reason why an application would throw an error on an update, when the DB tools do not? If we disable the trigger, the application has no problem updating the table.
Here is the relevant portion of the trigger:
create trigger t_press_run_change
on dbo.press_run_line_item
for insert, update, delete
as
updatepress_run_line_item
setis_changed = 1
from deleted d
join press_run_line_item p on p.press_run_line_item_id = d.press_run_line_item_id
where(p.is_changed = 0 or p.is_changed is null)
AND ((isNull(p.print_quantity,0) <> isNull(d.print_quantity,0))
OR (isNull(p.spoilage_pct,0) <> isNull(d.spoilage_pct,0))
OR(isNull(p.ad_dimension_id,0) <> isNull(d.ad_dimension_id,0))
OR(isNull(p.quarter_fold_id,0) <> isNull(d.quarter_fold_id,0))
OR(isNull(p.max_qty_per_shipment,'') <> isNULL(d.max_qty_per_shipment,''))
OR(isNull(p.packaging_max_height,'') <> isNull(d.packaging_max_height,''))
OR(isNull(p.packaging_max_weight,'') <> isNull(d.packaging_max_weight,''))
OR(isNull(p.packaging_skids,'') <> isNull(d.packaging_skids,''))
OR(isNull(p.packaging_turns,'') <> isNull(d.packaging_turns,''))
OR(isNull(p.packaging_cartons,'') <> isNull(d.packaging_cartons,''))
OR(isNull(p.preprint_delivery_time,'') <> isNull(d.preprint_delivery_time,''))
OR(isNull(p.contact_id,0)<> isNull(d.contact_id,0))
OR(isNull(p.address_company,'')<>isNull(d.address_company,''))
OR(isNull(p.address1,'')<>IsNull(d.address1,''))
OR(isNull(p.address2,'')<>IsNull(d.address2,''))
OR(isNull(p.address_city,'')<>IsNull(d.address_city,''))
OR(isNull(p.address_state,'')<>IsNull(d.address_state,''))
OR(IsNull(p.address_zip,'')<>IsNull(d.address_zip,''))
OR(isNull(p.address_Country_id,'')<>IsNull(d.address_country_id,''))
OR(isNull(p.client_printer_id,'')<>IsNull(d.client_printer_id,'')))
System Runs Slow
Jul 18, 2006Some users complain that there computers run slow around noon. later it is fine. Anybody can tell me what is the problem? We have entivirus software installed on. Also i am runing back up database on the server. Many thanks.
View 6 Replies View RelatedQuestion About The Account SQL Runs Under
Dec 11, 2006Hello everyone.
I am pretty new to SQL Server, but I have been reading a lot lately.
One of the things that I have gone over extensively lately is backups (I didn't understand it til recently.)
I have a question: right now, I need to be able to backup my SQL database to a file server; both the DB and TLogs. I don't have room for them on the local drive right now, so this is my last option.
Here is the catch.
The SQL server is not part of our domain. The file server box IS part of our domain.
In order to backup across the network, I need to change the account that SQL and the agent runs under.
Would this work:
Create a new account on the SQL box and make it part of the administrators group. Make the SQL server and SQL agent run under that account.
On the File server, create a local account. Make it the same (username and password) that was created on the SQL box. This should allow me to backup my DB to the share.
Would that work?
Lastly, by changing the account SQL runs under, does that change anything in the way that SQL runs? Does it affect the way users authenticate to SQL (Right now, they authenticate using SQL authentication)
Still new and learning. I appreciate the help
Scheduled Job Runs Forewer
Oct 12, 2007Hello,
I have scheduled job that are scheduled to run every 2 hours.
Its exec stored procedures. Normal execution time is up to 10 min.
But recently job not running successfully, it’s just executes forever. So I had to kill that job and I run it manually.
Please help,
I have no idea why it stops executing on its own by the schedule.
Thank you,
Bcp Only Runs On Master Database
Mar 5, 2004Hello,
I can't get bcp to run on any database but 'master'. I get a 'failed to login' error. i'm logged in as 'sa' with full permissions.
Please help
Thanks
Error When VB Runs DTS Package
Apr 27, 2004Hi ,
I am trying to run DTS package (stored on SQL Server) using Visual basic but i am getting the following error
Runtime error '-2147217843 (80040e4d)'
Login failed for 'MyUserID'
*************************************
i used the following code in VB program
Sub Command1_Click()
Dim dtsp As New DTS.Package
dtsp.LoadFromSQLServer _
ServerName:="MyServer", _
ServerUserName:="MyUserID", _
ServerPassword:="MyPassword", _
PackageName:="DTSDemo"
dtsp.Execute
End Sub
*************************************
I can Run the package direct from SQL server but get error by Vb program. Any idea why it is so.
Thanks
Procedure Runs With An Error???
May 24, 2004This is my procedure and the error is incorrect syntax near '01'
DECLARE @returnDay int
--Looking at current date,
SELECT @returnDay = DatePart(day,GetDate())
--If is the 7th of the current moth then
If @returnDay = 24
EXEC master.dbo.xp_sendmail
@query = 'SELECT a.HospitalName,a.HospitalCode,c.ProductName,b.UnitsDiscarded,d.FateOfProducts,b. DateEntered,
b.DateCompleted,b.CompiledBy FROM test.dbo.Units b inner join Hospitals a ON (a.HospitalID = b.HospitalID)
inner join Products c ON (b.ProductID = c.ProductID)
inner join FateOfProducts d ON (d.FateID = b.FateID)
where b. DateEntered = DateAdd(month, -1, Convert(CHAR(8), GetDate(), 121) + '01') order by a.HospitalID',
@recipients=test@hotmail.com', @message='Submitting Results for the previous month',
@subject=' results for previous month', @attach_results = 'true', @separator = '/s'
SELECT @@ERROR As ErrorNumber
What am I missing here now, I am quite new to stored procedures
REgards
Trigger That Runs On Update
Feb 7, 2008I'm new to SQL and am having some trouble figuring out Triggers. We use Microsoft Dynamics SL (formerly Solomon) for our accounting. We have a table that only has data in it while we're processing checks called PRCHECKTRAN. We'd like to build a report that uses the information in this table but it's only available until we "keep" the checks that we're printing. This creates an added step because we have to stop our Payroll process to go out and print the reports. It's been suggested to use a trigger to make a copy of the records in the PRCHECKTRAN table so we've got them after the checks are "kept." We're wanting something that's done behind the scenes so the user can continue to do things the way they always have while giving us access to the data past the payroll period.
Basically as soon as we calculate checks, PRCHECKTRAN is populated. Once the checks are accepted as good, PRCHECKTRAN is cleaned out. I think I need an update or insert trigger that copies all records over to another table that we'll create called something like PRCHECKTRAN_HOLD. I'm just not familiar enough with SQL to write it. Any direction you can provide would be greatly appreciated. Thanks.
Job Fails Though Package Runs
Dec 31, 2007
Like the name says, I'm trying hard, but I'm obviously missing something. Okay, I'm new to SSIS. I'm trying to write a job that deletes some Excel files on the server, copies some Excel files from a Sharepoint instance to the location where the deleted files were, runs an executable to manipulate those files, and then imports them to my SS instance.
the package runs fine when I run it from Managment Studio after installing it on the server. The 'execute task' fails when I run the job containing the package. After creating a proxy to have the SQL Server agent Service run with appropriate permissions, I thought I would have been rid of permissions issues (I gave the proxy way too much permission in an effort to narrow in on my issue), but I could still be missing something.
The job doesn't get into the package enough to even start writing to my log file, and all I get in the job history is the very cryptic 'DTExec: The package execution returned DTSER_FAILURE (1) ' error. If anyone has ideas, I would greatly appreciate being shown the error of my ways.
Thanks!
MDX Query Runs Out Of Memory
Jan 15, 2008Hi,
I am running the following MDX query through a DataReader and a Ado.Net Connection.
SELECT
{[Measures].[Deuda Total Nacional],
[Measures].[Deuda Total Nacional Maximo],
[Measures].[Cupo Nacional],
[Measures].[Porcentaje Utilizacion Maximo],
[Measures].[Pago Minimo Estado Cuenta],
[Measures].[Deuda Ultima Facturacion],
[Measures].[Dias Mora],
[Measures].[Dias Mora Maximo],
}
ON COLUMNS
,[Cuenta].[Cuenta].[Cuenta]*[Cuenta].[Rut].[Rut]*[Cuenta].[Dv].[Dv] ON ROWS
FROM [Bd Rtd]
WHERE [Tiempo].[Mes].&[2007-09-01T00:00:00]
The thing is, when I have about 10 thousand rows It runs in about 50 seconds which is good, but when I run this query and I have processed the cube with 100 thousand rows it runs out of memory and crashes.
I'm working in a shared development server with 1GB of memory for my project.
Is there any way to make it run anyway?? I mean even if it has to swap.
thanks
By the way when this thing goes into production it will have 1.5 million rows
Funny Error During Runs
Jan 26, 2007Can any one please help explain why this error has happened, it is not a normal error of SSIS,
"SSIS Debug host has encountered a problem and needs to close. We are sorry for the inconvenience"
It has 2 buttons Debug and Close, this error happened in the middle of a script task.
Net Stop....
Mar 11, 2002Hi All,
I'd like to remotly stop an instance of SQL Server
but this command does not seem to work....
net stop mssql$<server name> (eg. net stop mssql$prod)
...any ideas? I'll want to start this sql server again too.
David.
Stop SQL CLR In DB
Jan 30, 2008Is there any way to stop SQL CLR on database apart from using
sp_configure 'clr enabled', 1
GO
RECONFIGURE
GO
I want to stop this functionality on database...any idea...