How To Stop The Dts Package In SSIS Once The Cube Is Processed

Apr 17, 2008

Hi All,
I have some clarifications on stopping my package once cube is refreshed or processed.

Below i have given steps for the transformation in my package

Let me give you what are all the dataflow transformations that i had given in my package.

1. Data Flow Task

2. Script Task 1- I have written code for getting the last processed cube (global variable has been declared for Last processed cube date - lastProcessedCube)

3. Script Task 2 - I have written code for SS_Batch table where i can get Create_Ts date that is assigned to another global variable - create_ts.

4. Analysis Processing Task.

In between Script Task 2 and Analysis Processing Task i have given @lastProcessedCube > @create_ts for Expression and Constraint under Precedence Constraint Editor

Actually i need to run package for every 10 minutes which i can do it in Job Schedule and need to refresh or process the cube daily. Is there any way to stop the package once when my cube is processed on that day. Again start the package for the next day.... Is it possible to do this? Please let me know.

Thanks in Advance,
Anand Rajagopal

View 14 Replies


ADVERTISEMENT

Need To Get The Last Processed Cube Date In SSIS

Apr 15, 2008



Hi All,

I have a scenerio where i need to run the scheduled package for every 10 minutes. Let me give some examples. Say once my ETL process is done, my SS_Batch table gets inserted once. Here i have two columns like SS_Batch_cd and SS_Create_TS respectively. Once the ETL process runs successfully this SS_Batch_CD column will have values as 'C' which means 'Completed'. Similarly when ETL process fails this SS_Batch_CD column will have values as 'F' which means 'Failed'. And Similary when ETL process is in progress this SS_Batch_CD column will have values as 'P' which means it is in 'Progress'. In SS_Create_TS column, it will have date like 2008-04-15'.

Note : This SS_Batch table will get inserted only once when ETL job is over (whether the job is runned sucessfully or not or in Progress) along with the date.

Actually i need to run the package for every 10 minutes because i dont know when the last cube was processed. If i get this last processed cube date then i can check this processed cube date with SS_Create_TS column and SS_Batch_cd in SS_Batch table. Say if Last processed cube date is greater than SS_Create_TS then i can refresh or process the cube. This validation i need to do to achieve my goal.

What are all the control flows should we need to have in SSIS to achieve this scenerio? Please give me briefly to solve this problem.

Please advise on this.

Thanks in advance.
Anand Rajagopal.

View 4 Replies View Related

RUN NET START/STOP MSSQLSERVER FROM SSIS PACKAGE

Mar 27, 2007

HELLO,

I want to create a package which start and stop the SQL server's services... i know i can achive this via NET COMMAND.... but i coudnt find in which task (SSIS) I can place that command?..

I also came across that I can achieve this using Execute Process task but for this I have to define executable file.... actually i dont want ne thing outside from my SSIS package

CAN I ACHIEVE THIS WITH IN SSIS PACKAGE?

is there ne other alternative?



regards,

Anas

View 9 Replies View Related

How To Stop A SSIS Package Execution From Code?

Sep 13, 2006

Hi everyone,

After a Execute method I would need to stop a package but I don't know why:



sResultDts = pkg.Execute(Nothing, Nothing, EventsSSIS, Nothing, Nothing)



I have a Events class (EventSSIS) which implements IDTSEvents and have an OnQueryCancel event but without parameters, such so:

Function OnQueryCancel() As Boolean Implements IDTSEvents.OnQueryCancel

Return False

End Function



Let me know how to pass a boolean parameter because of I can't overloaded OnQueryCancel method

TIA-

View 1 Replies View Related

SSIS Package Cube

Jul 10, 2007

I am starting to brainstorm about building a package cube. Here are some of the initial ideas I have.



DimPackage

PackageKey

PackageName

SourceFile

ExecutedByMachine

ExecutedByUser



DimFTP

FTPKey

FileArrivalDatetime

PackageExecutionDatetime

FileName



DimTime

TimeKey

Day

Month

Year

Etc.



FactPackage

PackageKey

TimeKey

FTPKey

ArrivalToExecutionLag

#TimesRun

#Succeeded

#Failed



Do you know of some good cube schema's for reporting on SSIS package's? If this has already been done then I would rather not reinvent the wheel.

View 5 Replies View Related

Reporting Services :: Refresh SSRS Report As Soon As Its SSAS Cube Data Source Is Processed?

Oct 12, 2015

how to trigger report's refresh following its underlying SSAS cubes process?

I want to keep reports data updated at all times, especially when this happens while user is already browsing the report..

I don't want to set an auto refresh for the report every 5 minutes as my cube is processed only one time during the day...

View 8 Replies View Related

Analysis :: Measures Showing No Rows In SSAS Browser After Cube Processed Ok And Calculate Command Is There

Jun 10, 2015

I've created a cube and it processed fine. The calculate command is there. The measure that I'm attempting to run in the SSAS/Visual Studios browser is simply a count rows measure.  When I drag the measure to the window, it says no rows available.  If I click on the filter that allows nulls, the only change it makes is that it goes from no rows available to "NULL". 

View 4 Replies View Related

Reg:SSIS Package To Transfer Data Between SQL Table And Olap Cube

Apr 2, 2008



Hi All,
can anybody help me in creating the SSIS package to transfer the data from SQL table in database engine to OLAP cube in Analysis services


Thanks in Advance.
Archana

View 1 Replies View Related

SSIS Package To Import Data From SQL Datasource To Datawarehouse OLAP Cube

Apr 8, 2008

Hi All,

I have created database and OLAP cube in Analysis services using SSAS.In SSAS I have used a datasource which is using SQL tables to populate OLAP cube.Now when I added some more data to my SQL tables and trying to deploy cube,the newly added is not getting populated in the cube.So i want run SSIS package which will import data from SQL tables to this OLAP cube.

Can you please help me how to write this SSIS package to import data from SQL tables to OLAP cube.(Very urgent issue)

Thanks in Advance,
Swapna

View 4 Replies View Related

How To Stop Cube From Aggregating Product Prize

Oct 30, 2015

I've built a cube which has all the measures and dimensions I want, unfortunately the numbers are off: the product prize is aggregated then rather simply being fetched from the underlying oledb destination file in the data warehouse. So if product x costs 10 USD and has been purchased 3 times in a certain month by a customer, the cube shows a product prize of 30 USD. I've switched the measure's usage from SUM to no aggregations but I still don't get the simple value list without aggregation. Why is this happening?

View 4 Replies View Related

Reporting Services On Cube: Stop Parameters From Cascading

Aug 27, 2007

Hello,

I'm using a SSIS cube as source for reporting services. In my DataSet I have 3 parameters: Year, ProductGroup, Product. By default all parameters are cascading when defined on the DataSet. This is great for ProductGroup -> Product, but I don't want it for Year -> ProductGroup (I want to avoid the roundtrip). I removed the link in the generated MDX, I removed the parameters on the DataSet, but when I run the report, ProductGroup is still grayed out until I choose a year.

Suggestions are very welcome...

View 4 Replies View Related

Integration Services :: Write Key Value Of Records Processed To SSIS Log?

May 5, 2015

What's the best way to write key values of records processed in my SSIS 2012 package to the log provider chosen?My SSIS package deactivates widgets as well as thingies.  It was just released into production this week, runs daily, and we'd like to keep a close eye on what it's doing for a couple of weeks, by that I mean on any day be able to quickly see which thingies and widgets were deactivated that morning.  It typically deactivates less than 5 widgets and thingies per day.  

We could dig through the database to see which were deactivated, but that only works if somebody hasn't manually reactivated it since it was deactivated.  We need a log.  This is a temporary watch we're doing, so we don't want to write to a table or make make any significant package changes, such as adding new tasks.It seems like writing the 5-or-so deactivated thingy and widget key values to the log is the best way to watch this package.  What's the most efficient way to do this?  I'm hoping to avoid a new loop and script component with "Dts.Log" calls, but I don't know any other way.

View 3 Replies View Related

Using SSIS With SqlBulkCopy For ETL: How To Delete Processed Records From Staging Table

Jul 27, 2007

I'm looking at SSIS and SqlBulkCopy as a possible method to quickly insert and process large amounts of data, my current method uses the sp_xml_preparedocument and OPENXML to parse an xml document of the data I want to process and insert into the database, however I'm noticing the performance of SqlServer parsing the xml document isn't that good.

I found the C# SqlBulkCopy method (new in .NET 2.0) and I was thinking it would be faster to use that to load my data into a staging table and then use SSIS to extract the data from the staging table, process and transform it as necessary and finally load it into the final destination tables. I was able to create an Integration Services Project that selects the data from the staging table, does a bit of processing on one of the fields (by calling a stored procedure), and finally loads the processed data into the final table.

The problem with this is I need to clean out the rows that were extracted from the staging table and I'm not sure how I can accomplish this (and I can't just issue a "delete from staging_table" because there maybe new records in the staging table that were not processed), perhaps I can either delete each record as it is proccessed or somehow get the last proccessed identity id from the staging table and delete all records less than or equal to that id.

thanks in advance for any help you can provide, maybe there is an easy way to accomplish what I'm trying to do.

-Matt Palmerlee

View 3 Replies View Related

How To Stop A Package

May 26, 2006

Hi,

In one of my packages, I have a script component to do a transformation and I am inserting the output to table. Within that script component, if the data does not match my requirement, I have to stop the job. For that, I am using 'componentmetadata.fireError' to raise an error. The problem is, now even when an error is raised, the job completes by loading the remaining records and then aborts. But I want to abort the job as soon it raises an error. How to do this?

Thanks.

View 8 Replies View Related

Stop DTS Package From Running

May 6, 2008

I'm trying to stop a DTS package from continuing to run after the result of the following ActiveX script:

Function Main()
If day(date) > 2 and day(date) < 10 and weekday(date) = 2 Then
Main = DTSTaskExecResult_Success
Else
Main = DTSTaskExecResult_Failure
End if
End Function

Any help would be appreciated.

View 2 Replies View Related

Stop The Package Execution

Aug 2, 2006

Hello all

I want to cause the package to fail in DataFlow. I wanted use the script component for this purpose.

How I can do it?

Thanks

View 1 Replies View Related

Package Does Not Stop When Supposed To

Nov 19, 2007

Hi,

I have a package with For Loop container.

It looks like this:

FOR LOOP (until @IsCurrent < 1) [
[Execute Package Task 1] --> [Execute Package Task 2] --> [Execute SQL Task] --expression--> [Script Task]
]

So, in the [Execute SQL Task], it runs a stored procedure, which returns a 0 or 1 value, which is bound to the variable @IsCurrent. The variable then gets evaluated in the "expression." If @IsCurrent is 0, execution continues to the [Script Task]. That part works fine.

The problem is occurring in the [Script Task] portion. All the Script Task does is "sleep" for 3 minutes. Here is an excerpt of the code:


Dts.Variables("sleepCounter").Value = CInt(Dts.Variables("sleepCounter").Value) + 1

If CInt(Dts.Variables("sleepCounter").Value) = 20 Then

Dts.TaskResult = Dts.Results.Failure

Exit Sub

End If

So, as you can see, if "sleepCounter" = 20, it fails the task, which should then fail the package, right??

However, the package keeps running, even after sleepCounter has exceeded 20. The MaximumErrorCount on the For Loop container is set to 20 also. So after 20 failures, this package should fail, but it isn't!

Any ideas?

Thanks

View 9 Replies View Related

How To Stop Execution Of DTS Package (during Loop)

Jan 16, 2007

I have a MSSQL DTS Package where it needs to loop/execute 3 times because the main task is to import data from 3 excel files (different location) into 1 SQL table. I used a global variable vCounter and I use an ActiveX Script.

ActiveX Script 1

Option Explicit

Function Main()

Dim vDate, vCounter, vBranchCode, vPath

vDate="011207"

vCounter=DTSGlobalVariables("gVarCounter").Value

IF vCounter<=3 THEN

IF vCounter=1 THEN
vBranchCode="ALB"
vPath="D:PROJECTSHRISALB"
ELSEIF vCounter=2 THEN
vBranchCode="MOA"
vPath="D:PROJECTSHRISMOA"
ELSEIF vCounter=3 THEN
vBranchCode="PSQ"
vPath="D:PROJECTSHRISPSQ"
END IF

DTSGlobalVariables("gVarPath").Value=vPath & vDate & "_" & vBranchCode & ".xls"

Main = DTSTaskExecResult_Success

ELSE
<This is where i will initialize the global variable gVarCounter, so in the next execution..the value should be back to 1>
DTSGlobalVariables("gVarCounter").Value=1
<DTS Process should stop execution...how is this?>
END IF

End Function


After excel to sql dts
ActiveX Script2

Function Main()

IF gVarCounter<=3 then
DTSGlobalVariables("gVarCounter").Value=DTSGlobalVariables("gVarCounter").Value+1
DTSGlobalVariables.Parent.Steps("DTSStep_DTSActiveScriptTask_1").ExecutionStatus=DTSStepExecStat_Waiting
Main = DTSTaskExecResult_Success
END IF

End Function


Thanks a lot.

View 4 Replies View Related

Stop Package Validation On Open

Aug 8, 2007

Hi,

Simple question, is there a way to stop a package validating itself when i open it in visual Studio ?

I still want it to validate when i run, but not when i open it to view as its sooooooooooo slow....

any help is much appreciated?

Regards

Chris

View 3 Replies View Related

Integration Services :: Tell A Package To Stop Executing On Failure

Sep 8, 2015

I am using SQL Server 2012 SP1. I have built an SSIS package that imports flat file data from various files to SQL Server.  I have got it to do everything I want it to do when things are going well, and am now on what I want it to do when it encounters a failure executing specific tasks and containers.  For example, I have a Foreach Loop container that executes a dedicated stored procedure for each csv file in the target folder. If any of the store procedures fail to run for any reason I want to carry out certain actions.

For the most part I think I will be fine using the Event Handlers.  What I can't seem to find is how to tell the package to stop executing on a Failure event after carrying out the actions defined by the relevant Event Handler. Or, perhaps it isn't necessary as that would be the default behaviour on a failure?

View 2 Replies View Related

How To Stop Running DTS Package If My View Return Zero Record?

Jan 4, 2007

Hi everyone,

I've created a DTS package runs on every day and night, but now my boss was asking if I can insert an exception code to check the view file.

So.. I need help from you guys, cause I don't know How.

This is my DTS description.

My DB will generate a view called "Calls to Add", then it will run the Transform Data Task and insert into a txt file. once it finished, it will run the Batch file. that is it.

Now My boss wants me to add a checking code between "View to Txt" procedure. If the view has no record inside, than the DTS package should stop and not run.

BUT How??? Can someone please help?? Thanks

View 10 Replies View Related

How Can I Stop Or Continue Package Execution Based On Variable Value

Aug 1, 2006

Hi,

I need to make my package check a variable value at the begining of the execution and depending on the value of that variable it decides either to continue or stop the package execution. How can i do that?

thanks,

Aref

View 1 Replies View Related

There Must Be A Way To Tell SSIS Don't Stop; Keep Going

Apr 22, 2008



Here are some production error messages:


Error: 0xC0047039 at Load work$$MyDataFile from flat file, DTS.Pipeline:
SSIS Error Code DTS_E_THREADCANCELLED.
Thread "WorkThread0" received a shutdown signal and is terminating.
The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
There may be error messages posted before this with more information on why the thread was cancelled.

Error: 0xC0047021 at Load work$$MyDataFile from flat file, DTS.Pipeline:
SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0047039.
There may be error messages posted before this with more information on why the thread has exited.

I did not request a shutdown!
Someone please give me a global switch to tell SSIS to keep going.
Why should I not load 20,00 records because of one bad record?


I have tediously changed every field on every tool to "Ignore Error".
Why should I still have to do this? I mean why does SSIS default to failure?
Is there some switch I could change in the XML that would change this default behaviour?

The problem with the data in this case: a NewLine character was missing so it looked to the data flow as one very long line.

Hoping for a solution,
IanO

View 1 Replies View Related

Any Error In A Data Flow Task Makes My Package Stop

Apr 10, 2008

Hi, this is my first post and I'm relatively new to SSIS so please go easy on me.

Without going into too much detail about it, I've set up a simple SSIS package which does this in a nutshell:

Foreach loop picks up all *.xls files in a given folder
1 - Puts the name of the current spreadsheet into a variable
2 - File System Task copies the current spreadsheet ("abc.xls") to a file called "work.xls"
3 - Data Flow task performs data extraction on "work.xls" and puts it into a SQL server database
4 - File System Task moves "abc.xls" into a "success" folder
Continues with loop - move onto next spreadsheet

This works fine, so long as the spreadsheets all have the same number of columns.

As soon as one of them has a column missing (believe me, this will happen - we're dealing with users here) the package falls over at step 3.

When the package comes across an erroneous spreadsheet, what I'd like to do is move the offending file to a failure folder (making step 4 either a success or failure file move) and carry on with the next one.

I know that you can have an error path (the red line) from any step within the dataflow task, but this doesn't help me because the error lies in the structure of the spreadsheet and not the contents.


I've already come up with a work around whereby each file is moved into the failures folder just after step 2, then moved from the failures folder into the success folder at step 4.

This almost gives me what I want, although of course the package still falls over whenever it encounters a dodgy looking spreadsheet.

Is there any way that I can get the package to do what I'm after?



Many thanks,



Simon

View 1 Replies View Related

Job Running SSIS Package Keeps Failing But The SSIS Package By Itself Runs Perfectly Fine

Aug 30, 2006

Hey, I've a few jobs which call SSIS packages. If I run the SSIS package, it runs fine but if I try to run the job which calls this package, it fails. Can someone help me troubleshoot this issue? None of my jobs that call an SSIS package work. All of them fail.

Thank you

Tej

View 7 Replies View Related

ETL Package To OLAP Cube

Jul 20, 2006

Hi guys! I'm new here!

Is there a way to create an ETL package that gets data from a flat file, puts it in a fact table and then it creates a cube based on the data without user intervention? So the package will generate automatically a cube that can be used in SSAS?

I am sorry if I did not make any sense. Thanks!

View 7 Replies View Related

Excecute Package Task From BIDs:How To Stop Child Packages From Appearing In The Ide

Mar 21, 2007

Hi I have completed my first SSIS master package which runs a whole lot of child packages depending on value of expressions on workflow. (refer http://www.sqlis.com/306-3.aspx)

Each of my child packages is .dtsx file location and each Excute Package task uses the file connection.

The master parent package is also a dtsx file location which will be run by a SQL Server 2005 Agent

All good--problem is testing from BIDs--each time a Excecute package task is run--turns yellow a new tab appears apears in the design window --showing you that particular .dtsx file control flow detail. DTS never had this behaviour --can I turn this off in the BIDS ie as I have dozens of new tabs at run time which makes it very hard to keep track of the master package. All I want is the master package running from BIDs, and no new tabs appearing at run time???

Thanks kindly

Dave

View 4 Replies View Related

Modular DTS Package To Process AS Cube

Oct 5, 2001

I am unable to call a package with a cube processing task... it will not execute. I have even tried to simply call a package to process foodmart on my own machine and it will not run. The package when run manually executes fine.

Any ideas? Thanks in advance

View 2 Replies View Related

Stop And Start Analysis Services Using DDL Task In SSIS

May 6, 2008

How to use the "Analysis Services Execute DDL Task" in SSIS to stop or start the Analysis Services.? Many thnaks.

View 5 Replies View Related

Can I Stop SSIS Projects From Making Themselves The Startup Project?

May 19, 2008

[VS 2005]

I have a mixed solution with a C# project and an SSIS project. Now matter how many times I set the C# project as the startup project, it seems that as soon as I make a change to the SSIS package, it decides that it's so unbelievably important that it HAS to be the startup project. Is there any way to disable this?

View 4 Replies View Related

SQL Server 2012 :: SSIS - Stop DataFlow Task If Result Set Is Empty?

Oct 7, 2014

I am trying to create a SSIS package that will create a csv of a dataset for daily events in the database. However there will be days that there was no activity and thus an empty dataset. The package still runs fine but I want to stop the package if the dataset is empty.

FLOW:

DATA FLOW task: get daily data and put in CSV file

FTP TASK: upload the file to FTP server

MAIL/Copy file task: Move the file and then send a confirmation mail on task completion status.

Pretty simple and it all works great, I do have a few complexities in there. What I would like to add and I am at a loss is at the beginning, if the OLE DB Task resultset is empty then move to Mail Task otherwise process normally. I have tried conditional split, derived columns, the only thing I haven't tried in Script task and am not sure about that yet.

View 4 Replies View Related

SSIS And OLAP Cube DTS

Mar 3, 2006

I am having a problem creating an Integration Services package which executes an MDX query and place the results in a local DB.

I am using an OLE connection to connect to cube. However when I run the package I get the following error ....

[OLE DB Source [175]] Error: Cannot create an OLE DB accessor. Verify that the column metadata is valid.
AND
[DTS.Pipeline] Error: component "OLE DB Source" (175) failed the pre-execute phase and returned error code 0xC0202025.

Thanks in advance for the help

View 2 Replies View Related

Do I Need SSIS To Process Cube?

Feb 8, 2006

There is a function called "proactive caching" in Analysis services. It can:
----Automatic synchronization with the relational database
----No more explicit "cube processing
 
But I cannot have the latest data in the cube even I set the proactive mode as "real time"

Do I need SSIS to process cube in this case?
 
Following is the procedures I have done:
1. test the data
  1.1  use the bi dev studio to browser the cube, ensure no new data are there
  1.2  process the the cube and browser the data, ensure new data are there
  1.3 delete new data from source database and reprocess the cube, ensure no new data are there
1.4 add new data again
 
2. configure the proactive setting of cube
  2.1 use sql server management studio to open the cube  and open the properties window
 2.2  in the option of "proactive caching" select "low-latency MOLAP" (even real-time ROLAP later), then click ok
 
3. configure the proactive setting of cube
  3.1  open the patitions view properties window
 
 3.2  in the option of "proactive caching" select "low-latency MOLAP" (even real-time ROLAP later), then click ok
 
  3.3 in the notification tab, select "sql server " and specifiy tracking tables to the "fact table", which is a view to get data from real fact table.
 
4. wait a period of time...
 
5. test the data again
  5.1  use the bi dev studio to browser the cube, but no new data are there (even I selected real-time ROLAP later). I even tried the reconnect and refresh options in the tool bar
 
So my questions are :
1. Did I do the right thing to achieve the target "Automatic synchronization with the relational database "
 
2. Can I monitor the procedure of synchronization, such as monitoring the log of processing, viewing the schedule setting and status of the process?
 
 
 
Thanks a lot!

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved