How To Suppress Result Sets Returned From A Stored Procedure?
Aug 28, 2006
I have a novice question. How does one suppress result sets returned from a stored procedure?
I have created a procedure which makes use of multiple stored procedures . The purpose of this procedure (lets call it procA), is to count the rows returned from other procedures. The €œOther€? procedures will return rows having an unknown number of columns. I would like to limit any changes which may be needed to be made to the €œOther€? procs.
Once procA has collected all of the information (@@rowcount) from the inner procedures, then it will return a result set having several columns €“ mainly the subProcedure name and number of rows returned.
The purpose of procA is to query several subsystems and identify which ones need attention.
Cursor While Loop
exec @ProcName @ObjectName,@userID,@syncDate
set @recs = @@rowcount;
I have a SQL Server stored procedure that performs several queries and therefore returns several "result sets" at any one time.
Wiring it up via ADO.NET I populate a DataSet with a number of items in the Tables collection - which is great - and I can give each item a name for identification purposes once the DataSet is populated.
But I'd like to know if there is some way I can set the names of each result set *within the text of the stored procedure*, i.e. before the DataSet gets populated.
My stored procedure displays two result sets. How can i use that result sets in my 3-tier application. I want to bind first resultset to repeater control and second to label control. I am using SqlDataReader...
I have a stored procedure like the following. This returns 2 result sets, however i only want it to return 2nd (SELECT SomeField FROM SomeTable). How is this done? Note - it is not possible to change 'SomeSPThatReturnsAnIntAndAResultSet '
Hi there everyone. I have a stored procedure called “PagingTable� that I use for performing searches and specifying how many results to show per ‘page’ and which page I want to see. This allows me to do my paging on the server-side (the database tier) and only the results that actually get shown on the webpage fly across from my database server to my web server. The code might look something like this:
The problem is the stored procedure actually returns two result sets. The first result set contains information regarding the total number of results founds, the number of pages and the current page. The second result set contains the data to be shown (the columns specified). In ‘classic’ ASP I did this like this.
'Open the recordset rsItems.Open strSQL, conn, 0, 1
'Get the values required for drawing the paging table intCurrentPage = rsItems.Fields("CurrentPage").Value intTotalPages = rsItems.Fields("TotalPages").Value intTotalRows = rsItems.Fields("TotalRows").Value
'Advance to the next recordset Set rsItems = rsItems.NextRecordset
I am trying to do this now in ASP.NET 2.0 using the datasource control and the repeater control. Any idea how I can accomplish two things:
A) Bind the repeater control to the second resultset B) Build a “pager� of some sort using the values from the first resultset
I want to know how to handle multiple result sets return from Stored Procedure? I know one way is to insert the result sets into the table, but the limitation is the result sets must have the same data structure. If the result sets have different data structure, how can I handle it.
In MySQL we use "SELECT (....) LIMIT 0, 10" to only return the first 0 to 10 records. Alternatively we could do "LIMIT 10, 20" to return the 10th to 20th records.
com.microsoft.sqlserver.jdbc.SQLServer Exception: A server cursor cannot be opened on the given statement or statements . Use a default result set or client cursor.
If a SP doesnt have a temp table, then there is no issue, SP executes perfectly, but if a SP has a temp table, this error occurs.
SP :
create proc testProcedure @countrCode varchar(3) as
select countryname INTO #TMPCOU from country where countryCode = @countrCode SELECT COUNTRYNAME FROM #TMPCOU
I hvae a stored procedure that has this at the end of it: BEGIN EXEC @ActionID = ActionInsert '', @PackageID, @AnotherID, 0, '' END SET NOCOUNT OFF
SELECT Something FROM Something Joins….. Where Something = Something now, ActionInsert returns a Value, and has a SELECT @ActionID at the end of the stored procedure. What's happening, if that 2nd line that I pasted gets called, 2 result sets are being returned. How can I modify this SToredProcedure to stop returning the result set from ActionINsert?
I am working on application developed in ASP.NET 2.0 that uses lots of stored procedures from the SQL Server 2000 backend database.When the app is under load you occasionally see incorrect data returned to the page after running stored procedures.
All the stored procedures have been tested and appear to be fine. it's as if under load the returned data from the stored procedures is getting 'mixed' with another concurrent session. Please let me know what could be the reason behind it
I've created this stored procedure to run two DTS packages which pull in data from two Excel files. I'd like to supress the Results tab since the results from the DTS packages are fed to it. I'd like to keep the Messages tab visible.
CREATE PROCEDURE [dbo].[ImportHelpDeskTickets] AS BEGIN -- SET NOCOUNT ON added to prevent extra result sets from -- interfering with SELECT statements. SET NOCOUNT ON
[Code] ....
For those of you like me who will spend 8 hours trying to figure out how to get this working... Double up on the quotes as shown above. Also, be certain that NT SERVICEMSSQLSERVER has been granted appropriate rights to the folders with the the saved packages and the Excel files. You may also need to download the Access Database Engine.
Keywords: run dts package from stored procedure xp_cmdshell
'C:Program' is not recognized as an internal or external command, operable program or batch file.'
Since RDMBS and its language SQL is set-based would it make more senseto call a given stored process "Stored Sets" instead of currenttheorically misleading Stored Procedure, as a measure to prodprogrammers to think along the line of sets instead of procedure?
If you write a stored procedure to "SELECT MAX" from a table and the answer is null since the table is empty, how is the null answer returned to the program from the stored procedure? Do you actually get the letters "NULL" or do you just get a space? How should you define your variable in your program?
VS.NET 2005 automatically deploys a CLR stored procedure when you start a project with debugging. However, if the CLR stored procedure attempts to access external resources you will get a message stating:
System.Security.SecurityException: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
I've isolated this to being because the CLR stored procedure does not have the EXTERNAL_ACCESS permission set.
Is there a security attribute that can be used to decorate the CLR stored procedure code so that VS.NET 2005 will register the CLR stored procedure with the correct permission set?
I have a report based on our product names that consists of two parts.Both insert data into a temporary table.1. A single grouped set of results based on all products2. Multiple tables based on individual product names.I am getting data by calling the same stored procedure multipletimes... for the single set of data I use "product like '%'"To get the data for individual products, I am using a cursor to parsethe product list.It's working great except that I have no idea how to identify theresults short of including a column with the product name. While thatis fine, I'm wondering if there is something that is like a header ortitle that I could insert prior to generating the data that would looka little tighter.Thanks in advance-DanielleJoin Bytes!
I am calling stored procedure called GetCommonItemCount within another stored procedure called CheckBoxAvailability, the first stored procedure should return a count to second stored procedure and based on that some logic will be executed.
I have 2 problems in that
1. The result is not coming from first stored so the variable called @Cnt is always 0 although it should be 18 2. At the end i need to see in the output the result from second stored procedure only while now i am seeing multiple results of record sets coming.
I have attached the scripts also, the line i described in step1 is
Hi, I use a strong-typed DataSet to build the data access tier of my application, and the IDE generates most of code for me. However I can't find a way to get the value returned by a stored procedure(The stored procedure seems like 'RETURN 0').I noticed that a @RETURN_VALUE parameter is added automatically for each query method, but I don't know how to read the value. Anybody could help me with the problem? Thanks.
I have a store procedure (e.g. sp_FetchOpenItems) in which I would like to call an existing stored procedure (e.g. sp_FetchAnalysts). The stored proc, sp_FetchAnalysts returns a resultset of all analysts in the system. I would like to call sp_FetchAnalysts from within sp_FetchOpenItems and insert the resultset from sp_FetchAnalysts into a local temporary table. Is this possible? Thanks, Kevin
I have an asp.net 1.1 website that uses sql server 2000 and vb.I have a bit of a dilema, when I run a stored procedure in a webpage it returns the wrong value, but if I run itin the query analyzer the correct value is returned. Dim orderHistory As nlb.OrdersDB = New nlb.OrdersDB
' Obtain Order ID from QueryString Dim OrderID As Integer = CInt(Request.Params("ID"))
' Get the customer ID too Dim myNewCustomerId As Integer = 0 myNewCustomerId = orderHistory.GetOrderCustomer(OrderID)
Public Function GetOrderCustomer(ByVal orderID As Integer) As Integer
' Create Instance of Connection and Command Object Dim myConnection As SqlConnection = New SqlConnection(ConfigurationSettings.AppSettings("ConnectionString")) Dim myCommand As SqlCommand = New SqlCommand("nlbsp_OrdersCustomerID", myConnection)
' Mark the Command as a SPROC myCommand.CommandType = CommandType.StoredProcedure
' Add Parameters to SPROC Dim parameterOrderID As New SqlParameter("@order_id", SqlDbType.Int, 4) parameterOrderID.Value = orderID myCommand.Parameters.Add(parameterOrderID)
Dim parameterOrderCustID As New SqlParameter("@customer_id", SqlDbType.Int, 4) parameterOrderCustID.Value = ParameterDirection.Output myCommand.Parameters.Add(parameterOrderCustID)
'Open the connection and execute the Command myConnection.Open() myCommand.ExecuteNonQuery() myConnection.Close()
' Return the customer_id (obtained as out paramter of SPROC)
If parameterOrderCustID.Value <> 0 Then Return CInt(parameterOrderCustID.Value) Else Return 0 End If
End Function
the stored procdure is CREATE PROCEDURE [dbo].[nlbsp_OrdersCustomerID] ( @order_id int, @customer_id int OUTPUT ) AS
/* Return the customer_id from the Orders. */ SELECT @customer_id = customer_id
FROM nlb_Orders
WHERE order_id = @order_id GO
I know a particular order_id returns a value of 1. But when I run it in the webpage it always comes back as 2. Any ideas would be appreciated ThanksPete
The following query only brings back too much data in the table - there are duplicates and the lab it shows is wrong. The problem is: AND a.calLab = f.ID in the Where statement. Some equipment does not need calibration, so, a.calDueDate = 0 AND a.calLab would be NULL or 0. tblLabs ID field has 1 - 18 (Labs) - no 0 and of course no null I need to get the rest of the data. Any suggestions? Thanks..... Zath
SELECT a.assignedID, b.Manufacturer, a.modelNumber, a.serialNumber, e.equipmentType, a.Description, c.Location, d.Status, a.modifiedDate, a.modifiedBy, a.Notes, a.Picture, f.LabName, a.calibrationRequired, a.calDate, a.CalDueDate, a.assetNumber, a.ID FROM tblEquipments a, tblManufacturers b, tblLocation c, tblStatus d, tblEquipment_Type e, tblLabs f WHERE a.manufacturer = b.manufacturerID AND a.location = c.locationID AND a.Status = d.statusID AND a.EquipmentType = e.ID AND (a.calLab = f.ID or a.calLab Is NULL or a.calLab = 0) ORDER BY a.ID
I have a stored procedure that selects * from my table, and it seems to be working fine: USE myDB GO IF OBJECT_ID ( 'dbo.GetAll', 'P') IS NOT NULL DROP PROCEDURE GetAll GO CREATE PROCEDURE GetAll AS DECLARE ref_cur Cursor FOR SELECT * FROM myTable Open ref_cur FETCH NEXT FROM ref_cur DEALLOCATE ref_cur
The problem is, I'm trying to create a DB class, and I'm not sure what Parameter settings I'm supposed to use for my returned values. Can anyone help me finish this?public class dbGet_base { public dbGet_base() { _requestId = 0; }
public dbGet_base(Int64 RequestId) { this._requestId = RequestId; getDbValues(RequestId); } public void getDbValues(Int64 RequestId) { getDbValues(RequestId, "GetAll"); } public void getDbValues(Int64 RequestId, string SP_Name) { using(SqlConnection Conn = new SqlConnection(ConfigurationManager.AppSettings["WSConnection"])) using (SqlCommand Command = new SqlCommand(SP_Name, Conn)) { Command.CommandType = CommandType.StoredProcedure; Command.Parameters.Add("@Request_Id", SqlDbType.Int).Value = RequestId; Command.Parameters.Add(?? } }
@UserIdvarchar(50), @Passwordvarchar(50) AS SELECT tblAdvertisers.UserID, tblAdvertisers.Password FROM tblAdvertisers WHERE ((tblAdvertisers.UserID = @UserId) AND (tblAdvertisers.Password = @Password))
I can run it in Query Analyzer and it returns one record as it should. I want it in ASP.NET to return the amount of rows that are effected, e.g that the login is correct.
The code I have is:
public bool ValidateUserIdAndPassword(string userId, string password) { sqlCommand.CommandType = CommandType.StoredProcedure; //the name of the stored procedure sqlCommand.CommandText = "spValidateUserIdAndPassword";
SqlParameter myParam;
//add the param's to the SP
//userId information for the user myParam = new SqlParameter("@UserId", SqlDbType.VarChar, 50); myParam.Value = CStr(userId); sqlCommand.Parameters.Add(myParam);
//password information for the user myParam = new SqlParameter("@Password", SqlDbType.VarChar, 50); myParam.Value = CStr(password); sqlCommand.Parameters.Add(myParam);
I have a stored procedure that return either 1 or -1 : IF EXISTS( ) BEGIN return 1 ENDELSE BEGIN return -1 ENDAnd then I try to retrieve the returned value by doing this:int value = Convert.ToInt32(command.ExecuteScalar());But the value I get is always 0. Anyone see what is wrong?
I have the following stored procedure. The good thing is I finally got the syntax to the point where it doesn't blow up, but I was under the impression the "print" statement would print my result. In this case all I get is the statement ' 1 Row Affected ' which by the way is not the answer I was expecting.
Here's the code: ' CREATE PROCEDURE createevents AS
declare @myvariable varchar(700)
declare @myvar varchar(700)
begin Select @myvariable = d.id from table1 d, table2 dc where d.class = dc.class
If @myvariable > 0 begin Select @myvar =dp. class from table3 dp, table2 dc where dp.class = dc.class
If @myvariable >= 1 begin print @myvariable + (',') + @myvar end end
else begin print @myvariable + ('is empty') end end
I am using the following stored procedure to insert a value into the database. I am new to stored procedures so I need help. Basically this stored procedurewill only insert a value for "CustomerName" if it is not a duplicate value. So I noticed in My C# when I call this stored procedure, a negative one "-1"is returned if the insert is not performed because of a duplicate value. Is that correct? Should I be getting back a negative one "-1" ? You seeI thought that a Zero "0" would be returned if the insert was not performed.Not a negative one? SET ANSI_NULLS ONGOSET QUOTED_IDENTIFIER ONGO CREATE PROCEDURE [dbo].[CustomerCreate]( @CustomerDescription nvarchar(100), @CustomerName nvarchar(100), @LastUpdateDate datetime, @LastUpdateUser nvarchar(32), @inserted_record smallint output) AS if exists (select 1 from Customer where CustomerName = @CustomerName) BEGIN set @inserted_record = 0 END ELSE BEGIN INSERT INTO Customer ( CustomerDescription, CustomerName, Active, LastUpdateDate, LastUpdateUser ) VALUES ( @CustomerDescription, @CustomerName, @LastUpdateDate, @LastUpdateUser ) END
I am trying to use a stored procedure inside the scripter in a site server pipeline. Can anyone tell me how the scripter will read the the result which is a variable. The stored procedure is returning the right value when run in query analyzer but I don't know how to retrieve it inside the pipeline.
I have a recordset returned from a stored procedure executed in the form open event. Could this recordset append to the form's recordsource property in the form's open event in VB? if so, what's the syntax?
Private Sub Form_Open(Cancel As Integer) dim ...
Set add_bag_results = Nothing With add_bag_results .ActiveConnection = CurrentProject.Connection .CommandType = adCmdStoredProc .CommandText = "spSampling_add_bag_results" .Parameters.Append .CreateParameter("ret_val", adInteger, adParamReturnValue) '.Parameters.Append .CreateParameter("@lotnum", adInteger, adParamInput, 4, rs_add_bag_results(1)) .Parameters.Append .CreateParameter("@lotnum", adInteger, adParamInput, 4, lot_n) .. Set rs_add_bag_results = .Execute End With
I have 1 files, one is .sql and another is stored procedure. SQL file will call the stored procedure by passing the variables setup in the SQL file. However, everything ran well except at the end, I try to get the return value from SP to my SQL file ... which will send notification email. But, I get the following msg ... I am not sure how to fix this ... help!!! :( Syntax error converting the varchar value 'ABC' to a column of data type int. SQL file ====================== DECLARE @S AS VARCHAR(1000) EXEC @S = PDT.DBO.SP_RPT 'ABC' SELECT CONTENT = @S -- this is the value I am trying to pass as content of the email EXEC PRODUCTION.DBO.SENDEMAIL 'xxx@hotmail.com', 'Notification', @S ====================== Stored Procedure ====================== CREATE procedure sp_RPT( @array varchar(1000) ) AS DECLARE @content AS VARCHAR(2000) SET @content = 'RPT: ' + @array + ' loaded successfully ' SET @array = 'ABC'RETURN CONVERT(VARCHAR(1000),@array) GO
Stored Procedure ProblemThis is probably a simple problem but i would appreciate some help.I have a stored procedure that takes the order date time plus other information fromvarious tables but the information is being returned double:ie 4 rows are being returned instead of two. Can anyone see where i am going wrong?Many thanksMartinThis is the stored procedureALTER PROCEDURE dbo.SP_RetrieveOrdersASSELECT distinct OD.DateCreated, O.OrderID,O.UserID,O.OrderTotal,O.Sent,O.Delivered,O.Paid,C.CustomerNameFROM Orders As O,Customers As C,OrderDetails as ODWHERE O.UserID=C.UserID And O.OrderTotal >0 RETURNThese are the results that are returnedDateCreated OrderID UserID OrderTotal Sent Delivered Paid CustomerName ----------------------- ----------- ------------------------------------ ---------------- ------ --------- ------ --------------- 18/10/2006 14:49:00 41 7A2E2B9B-57FA-4329-B4BB-D7ED965AA183 500 <NULL> <NULL> <NULL> bill 18/10/2006 14:49:00 42 7A2E2B9B-57FA-4329-B4BB-D7ED965AA183 590 <NULL> <NULL> <NULL> bill 18/10/2006 15:05:00 41 7A2E2B9B-57FA-4329-B4BB-D7ED965AA183 500 <NULL> <NULL> <NULL> bill 18/10/2006 15:05:00 42 7A2E2B9B-57FA-4329-B4BB-D7ED965AA183 590 <NULL> <NULL> <NULL> bill No rows affected.(4 row(s) returned)If I leave OD.DateCreated ie use ALTER PROCEDURE dbo.SP_RetrieveOrdersASSELECT distinct O.OrderID,O.UserID,O.OrderTotal,O.Sent,O.Delivered,O.Paid,C.CustomerNameFROM Orders As O,Customers As C,OrderDetails as ODWHERE O.UserID=C.UserID And O.OrderTotal >0 RETURNthen there is no problem. I get:41 7A2E2B9B-57FA-4329-B4BB-D7ED965AA183 500 <NULL> <NULL> <NULL> bill 42 7A2E2B9B-57FA-4329-B4BB-D7ED965AA183 590 <NULL> <NULL> <NULL> bill No rows affected.(2 row(s) returned)
Hi, I need to write a select query that will run all returned results through a separate stored procedure before returning them to me. Something like.... SELECT TOP 10 userid,url,first name FROM USERS ORDER by NEWID() ......and run all the selected userids through a stored procedure like..... CREATE PROCEDURE AddUserToLog (@UserID int ) AS INSERT INTO SelectedUsers (UserID,SelectedOn) VALUES (@UserID,getdate()) Can anyone help me to get these working togethsr in the same qurey?
