Hi !
I am working on Converting existing Crystal reports to Reporting Services. Now I have a line in Crystal reports which has a formula for supression. I dont know whats the equivalent of supress in SSRS. I have tried Visibility as hidden but then it shows empty line but not supressed line.
I have the following code to SUM based on one field but want to be ableto not show rows which result is 0.========================SELECT Headers.employee_id AS Employee#,SUM(CASE Headers.scan_type WHEN 'I' THEN 1 ELSE 0 END) AS SIP,SUM(CASE Headers.scan_type WHEN 'F' THEN 1 ELSE 0 END) AS PUP,SUM(CASE Headers.scan_type WHEN 'Q' THEN 1 ELSE 0 END) AS CMT,SUM(CASE Headers.scan_type WHEN 'M' THEN 1 ELSE 0 END) AS CONS,SUM(CASE Headers.scan_type WHEN '' THEN 1 ELSE 0 END) AS HIP,SUM(CASE Headers.scan_type WHEN 'U' THEN 1 ELSE 0 END) AS HOP,SUM(CASE Headers.scan_type WHEN '^' THEN 1 ELSE 0 END) AS INSTA,SUM(CASE Headers.scan_type WHEN 'L' THEN 1 ELSE 0 END) AS ONRD,SUM(CASE Headers.scan_type WHEN 'B' THEN 1 ELSE 0 END) AS POD,SUM(CASE Headers.scan_type WHEN 'G' THEN 1 ELSE 0 END) AS PUX,SUM(CASE Headers.scan_type WHEN '#' THEN 1 ELSE 0 END) AS ROP,SUM(CASE Headers.scan_type WHEN 'J' THEN 1 ELSE 0 END) AS SOP,SUM(CASE Headers.scan_type WHEN 'N' THEN 1 ELSE 0 END) AS STAT,SUM(CASE Headers.scan_type WHEN 'R' THEN 1 ELSE 0 END) AS UNCON,SUM(CASE Headers.scan_type WHEN '<' THEN 1 ELSE 0 END) ASUSPS_PSP,SUM(CASE Headers.scan_type WHEN '"' THEN 1 ELSE 0 END) AS RIP,COUNT (Scans.header_index) AS EmpTotFROM Headers INNER JOINScans ON Headers.header_index = Scans.header_indexWHERE (Scans.datetime BETWEEN '06/18/2003 00:00:00' AND'06/19/2003 23:59:00')GROUP BY Headers.employee_idORDER BY Headers.employee_id===============================Any ideas?Thanks,Manuel--Posted via http://dbforums.com
View 9 Replies View RelatedI'm executing this dynamic query in the middle of stored proc to get the @hrs2 value:
select @sql=('select @hrs2 = sum('+quotename(@day2)+') from #pso_view where id = ')
select @sql= @sql+cast(@num as varchar(5))
EXEC sp_executesql @sql,N'@hrs2 int OUTPUT',@hrs2 OutPut
SELECT @hrs2
That works, but then it returns a row result with every exec and that messes up my desired row return from the contaner sp for my web control databind
Any tips on how to get the varible populated via the dynamic sql w/o rows return?
THANKS!!!!!!!!
How do I get a Report Table to supress blank rows from displaying ?
In Crystal Reports this option is available under Format Detail Section, supress blank section chekckbox.
Cannot find this anywhere while creating a report. Is this an option?
thanks.
Hi
Can we supress the System error messages ?
if yes how ?
for ex. In a table I am adding a row which is voilating primary key constarint ..I do not want system message for that ..
Server: Msg 2627, Level 14, State 1, Line 0
Violation of PRIMARY KEY constraint 'PK_b'. Cannot insert duplicate key in object 'b'.
The statement has been terminated.
I can write a user defined message for this purpose but I am not able to supress system message .
The procedure I am using is
CREATE PROCEDURE add_b
@num int,@empno int, @name varchar(6)
AS
INSERT INTO B (num, empno, ds ) values (@num,@empno,@name)
-- Test the error value.
IF @@ERROR <> 0
BEGIN
-- Return 99 to the calling program to indicate failure.
RAISERROR ('Job id 1 expects the default level of 10.', 16, 1)
PRINT "An error occurred loading the new author information"
RETURN(99)
END
ELSE
BEGIN
-- Return 0 to the calling program to indicate success.
PRINT "The new author information has been loaded"
RETURN(0)
END
GO
Sujit
I have a stored procedure where in a cursor I create a dynamic select
statement. If I have a non-zero result set (check @@rowcount) I output a message. The problem is I do not know how to supress the output of the
execute of the dynamically created select statement. All I want going to
output is the message. I know ISQL has this function, and so does EM. How do I do it totally within a stored procedure.
HiI have a dynamically constructed sql query that I want to execute, e.g.exec('select * from ' + @tablename)(1) Can I suppress the output somehow if this returns no values?(2) Can I use the result of this query in another query somehow? e.g.select(3) Can I control the size of the columns in the output somehowThanksF
View 3 Replies View RelatedI have several columns with expressions that return Nothing under certain conditions:
Example:=(IIF( Fields!solved.Value=False,IIF( Fields!TAT3.Value >120, IIF(Fields!TAT3.Value <144,Fields!Ticket.Value,Nothing),Nothing),Nothing))
As a result, I get tons of white/empty space, because 200 values were evaluated as Nothing and only 5 values/records were actual numbers.
How can I supress this Nothing value ?
Hello -
Does anybody know of a way to force SSRS to render a report with no page breaks at all? And better yet, to render as such but export using breaks (I know, thats asking a lot but the first part seems to be a reasonable request)
I have 1 report that renders a lot of data with no page breaks and cannot find a SINGLE property difference from the reports that do break...
Thanks in advace,
Gary
Is there any way to supress the popup window on the export option so that the first thing the user see's is the open/save dialog?
Alternatively
Is there a way to make the window close when the open/save dialog appears?
Thanks
Mike
Hi all!
I´ve having some issues with a package that I´m currently building.
The package is pretty much finished and doing what it´s supposed to,
just doing some testing to ensure everything is in order.
The package is pretty basic:
Read a fixed with text file, do a lookup on destination database table,
conditional split to determine what to insert and what to update, and that´s it!
At the source of my data flow I have the error output set to redirect all rows,
counting those rows, and finally writing them to a dynamically created file.
However, I just now realized that this file seems to be created ALWAYS,
regardless of rows actually being redirected or not. Everytime I run the package
with no rows being passed through the error output, I still end up with a
dynamically named, zero sized text file.
So my question: Is it possible to supress the creation of this file,
or do I have to add a file system component to my control flow,
deleting this file if my number of errorrows = 0 ?
Hope you can help!
Regards
Daniel
Hi,
for some AP issue, the file I upload must be without the line feed/carriage return in the last line.
for example:
original fixed-length file (exported from SSIS)
line NO DATA
1 AA123456 50 60
2 BB123456 30 40
3 CC123456 80 90
4 <-- with line feed/carriage return in the last line
The file format that AP request. The file only has 3 records, so it should end in the third line.
line NO DATA
1 AA123456 50 60
2 BB123456 30 40
3 CC123456 80 90
Should I use script component to do it ? I am new for VB . Anyone would help me ?
Thank you all.
I need the Trend line for the following data in Line chart they are the following data. The following are the graph are my output and i need the trend line for these Key_gap value.
This is the link [URL] ....
I need the same trend line for the Bar-Chart in SSRS 2005.
I hope I'm posting this in the correct forum (forgive me if I'm not) since I'm not sure if this is an issue with inserting an item into a db or the processing of what I get out of it. I wrote a basic commenting system in which someone my post a comment about something written on the site. I wanted to keep it very simple, but I at least want the ability for a user to have newlines in their comment without having to hardcode a <br /> or something like that. Is there a way for me to detect a newline if someone, for example, is going to their next paragraph?
Let me know if you need a better explanation.
Thanks in advance!
G'day everyoneThat's a space between the ticks.It's all part of a longer script but seeing as the failure occurs online 1if exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[config]') and OBJECTPROPERTY(id, N'IsUserTable') =1)drop table [dbo].[config]GOThat's three lines only. Does it matter that they're in Unicode?Any ideas?Kind regards,Bruce M. AxtensSoftware EngineerStrapper Technologies
View 3 Replies View RelatedWe have a line graph which plots the actual data points (x,y), everything is working fine with this graph. Now we need to add a trend line to this existing graph after going thro. the articles we came to know that there is no direct option in SSRS to draw a trend line. So we need to calculate the trend values ourselves which we need to plot as atrend line. This trend line is similar to the trend line which comes in Excel chart, do anyone know how to calculate the trend values from the actual data points. We got through several formulas, but were not clear, have anyone tried out exactly the same, if so please help us out by providing an example to calculate the trend values.
View 1 Replies View RelatedI have a line graph which shows positive and negative values. Is it possible to have the line one color when its negative and another when its positive?
kam
HEllo can anybody tell me how to monitor a long store procedure
line by line. Also how to put progress bar in it to tell user how
much is done.
Sabih.
Hi,
When creating a line chart, I would like to be able to show Markers for the data points, but no line between these points (as you can do in excel).
I have set the line setting to none (for the lines of interest), however the lines still show.
Is this a bug, or am i missing something obvious settings-wise?
Cheers,
M
HiIt's my stored procedure 1 CREATE PROCEDURE singleSearch2
2 @SQ nvarchar(30),
3 @pType nvarchar(11),
4 @pCol nvarchar(11)
5 AS
6 BEGIN
7 DECLARE @SQL NVarChar(1000)
8 SELECT @SQL='SELECT *,'
9 SELECT @SQL=@SQL+' CASE RTRIM(LTRIM(op))'
10 SELECT @SQL=@SQL+' WHEN '+CHAR(39)+'e'+CHAR(39)+' THEN '+CHAR(39)+'اجاره'+ CHAR(39)
11 SELECT @SQL=@SQL+' WHEN '+CHAR(39)+'r'+CHAR(39)+' THEN '+CHAR(39)+'رهن'+CHAR(39)
12 SELECT @SQL=@SQL+' WHEN '+CHAR(39)+'f'+ CHAR(39)+' THEN '+ CHAR(39) +' Ù?روش '+CHAR(39)
13 SELECT @SQL=@SQL+' WHEN '+CHAR(39)+'e r'+CHAR(39)+' THEN '+CHAR(39)+ 'اجاره - رهن '+CHAR(39)
14 SELECT @SQL=@SQL+' WHEN '+CHAR(39)+'e f'+CHAR(39)+' THEN '+CHAR(39)+'اجاره - Ù?روش '+CHAR(39)
15 SELECT @SQL=@SQL+' WHEN '+CHAR(39)+'r f'+CHAR(39)+' THEN '+CHAR(39)+' رهن - Ù?روش '+CHAR(39)
16 SELECT @SQL=@SQL+' WHEN '+CHAR(39)+'e r f'+CHAR(39)+' THEN '+CHAR(39)+'اجاره - رهن - Ù?روش'+CHAR(39)
17 SELECT @SQL=@SQL+' ELSE op END AS xop, CASE LTRIM(RTRIM(type)) '
18 SELECT @SQL=@SQL+' WHEN '+CHAR(39)+'z -'+CHAR(39)+' THEN '+CHAR(39)+'زمین'+CHAR(39)
19 SELECT @SQL=@SQL+' WHEN '+CHAR(39)+'m -'+CHAR(39)+' THEN '+CHAR(39)+'مسکونی'+CHAR(39)
20 SELECT @SQL=@SQL+' WHEN '+CHAR(39)+'t -'+CHAR(39)+' THEN '+CHAR(39)+'تجاری'+CHAR(39)
21 SELECT @SQL=@SQL+' ELSE [type] END AS [xtype] FROM [data] '
22 SELECT @SQL=@SQL+' WHERE ([type] LIKE %'+CHAR(39)+@pType+CHAR(39)+'%) AND ('+@pCol+' LIKE %'+CHAR(39)+@SQ+CHAR(39)+'%)'
23 Exec (@SQL)
24 END
25 GO
and i face this error: Line 1: Incorrect syntax near '-'.
Hi
Anyone have any idea how to make a line style dashed or dotted in a line chart please?
If I change the series style to dashed or dotted it still appears as a solid line, yet the legend displays a dashed or dotted line....
Thanks
My question is about coding style for specifying constraints when creating tables.
Two styles for defining constraints:
In-line:
CREATE TABLE Fruit
(
FruitID INT IDENTITY(1,1)
CONSTRAINT PK_fruit PRIMARY KEY CLUSTERED,
FruitName NVARCHAR(50),
FruitTypeID INT
CONSTRAINT FK_fruit_fruit_types FOREIGN KEY
REFERENCES FruitTypes (FruitTypeID) ON UPDATE CASCADE,
DateCreated DATETIME DEFAULT GETDATE()
)
Out-of-line:
CREATE TABLE Fruit
(
FruitID INT,
FruitName NVARCHAR(50),
FruitTypeID INT,
DateCreated DATETIME
)
ALTER TABLE Fruit ALTER COLUMN FruitID INT NOT NULL
ALTER TABLE Fruit ADD
CONSTRAINT PK_fruit PRIMARY KEY CLUSTERED (FruitID),
CONSTRAINT FK_fruit_fruit_types FOREIGN KEY (FruitTypeID)
REFERENCES FruitTypes (FruitTypeID),
CONSTRAINT DF_fruit_date_created DEFAULT
GETDATE() FOR DateCreated
Which style do you prefer and why?
Hi
If i use this code i cant get the data showed, it show nothing."SELECT COUNT(DogImageDate) AS Amount, DogImageDate, DogImageID FROM EnggaardImages WHERE DogImageDate NOT LIKE (SELECT TOP 1 DogImageDate FROM EnggaardImages ORDER BY DogImageDate DESC;) GROUP BY DogImageDate ORDER BY DogImageDate DESC;"
But if i use this code i get data showed"SELECT COUNT(DogImageDate) AS Amount, DogImageDate, DogImageID FROM EnggaardImages GROUP BY DogImageDate ORDER BY DogImageDate DESC;"
Then i get Images(6)Images(1)Images(1)
But i dont want the first to be showed, therefor i use the Select TOP 1, so i get a look like this
Images(1)Images(1)
But i cant get it to work.
Hello all
Trying to delete some data from a SSCE (2005) DB produces the exception:
SqlCeException
There was an error parsing the query. [ Token line number = 1,Token line offset = 43,Token in error = C]
Here is the code I am using
string dsc = Application.StartupPath + "\FCDB07.sdf";
conn = new SqlCeConnection("DataSource = " + dsc);
conn.Open();
cmd = conn.CreateCommand();
cmd.CommandText = "DELETE FROM DataContainer WHERE FileName =" + dgContainers[0, SelRowIndex].Value.ToString();
cmd.ExecuteNonQuery(); //There was an error parsing the query. [ Token line number = 1,Token line offset = 43,Token in error = C ]
conn.Close();
Any Idea on What causes this?
TIA
Trophus
Hey all-
I'm trying to insert some values into an SQL Compact database on a WM6 device but there is something apparently wrong with my SQL statement...
The program is going to allow users to schedule an SMS message to be sent at a certain date and time. I'm using a database to keep track of the scheduled SMS messages. The database has 3 rows: phone number, message, and the date/time to be sent.
Here is the relevent code:
private void scheduleMenu_Click(object sender, EventArgs e)
{
//connect to DB and do our scheduling magic
string message = messageBox.Text; //should rename messageBox...
string phoneNum = phoneNumBox.Text;
string dataBase = @"Program FilesSMS_Scheduler2SMSDatabase.sdf";
//SqlCeEngine eng = new SqlCeEngine(dataBase);
SqlCeConnection conn = new SqlCeConnection("Data Source=" + dataBase);
conn.Open();
//insert phone number, message text, and date/time into DB
string cmd = "INSERT INTO Scheduler(phoneNum, message, date) VALUES("+ phoneNum + ", "+ message + ", "+ dateTimePicker1.Value +")";
SqlCeCommand cmdPhone = new SqlCeCommand(cmd,conn);
cmdPhone.ExecuteNonQuery(); //error occures here...
messageBox.Text = "";
MessageBox.Show("Message Scheduled!");
}
I'm guessing it doesn't like how I am trying to get the data from the different text boxes and the DateTimePicker to go inside the SQL command. Does anyone have any ideas on how to fix my SQL command or how to get data from a textbox and DateTimePicker to be inserted into a database a different way?
Hi, i've got a table which holds a field called order.
Let's say it looks like this
ItemId Name Order
223 test 1 1
542 test 5 34
23 test 2 4
676 test 123 2
I'm building a website, which gets the records by the right order.
So it displays this on the website:
test 1
test 123
test 2
test 5
Now, I'm building a up/down function.
So when I click down on 'test 123' it should swap the order with 'test 2'
So the database will look like this:
ItemId Name Order
223 test 1 1
542 test 5 34
23 test 2 2
676 test 123 4
And the website will look like this:
test 1
test 2
test 123
test 5
And it should also work the other way around with the up button.
So my guess is, I have the order of the item I clicked on (2) and I should get the order of the previous or next record (depending on which button I clicked).
So how would I do that?
'So whats the SQL server 2005 Express Edition gonna be called here?
sub openconn ' open a connection to access db'
dim tries
set conn = CreateObject("ADODB.Connection") 'prep connection'
set rs = CreateObject("ADODB.Recordset") ' prep recordset'
tries = 0 ' clear tries counter'
do 'try to open connection to the db
conn.open "DRIVER={Microsoft Access Driver (*.mdb)};" &_ 'CHANGE THIS STRING FOR SQL CONNECTION
"DBQ=" & RouteFile & ";DefaultDir=;UID=;PWD=;"
tries = tries + 1
if (err.number <> 0) then 'if errored, close this connection
conn.close
end if
Loop While (Err.Number<>0) And tries < 10 'if errored, try again. MAX TRIES = 10
end sub
I wanted to know how to insert line breaks while updating the database. Even if I have a number of paragraphs......everything is displayed as one single paragraph. How do i display text in paragraphs ?
Hope someone can help me out. Thanks in advance.
Hi,
I just started at a client's site and have found that the Books On Line has been removed (all other items are there in the program group instead of BOL). Is there a site at microsoft that mimicks BOL? (sybase has a 'sybooks on the web' which mimicks their 'Sybooks' product documentation.
Any help would be appreciated.
jim
Hello!
I have the database out of line, but it doesn't have suspect status.
As I know in SQL Server 6.5 I can run sp_marksuspect stored procedure
for this database and then try to reset suspect status. But I didn't find
sp_marksuspect in SQL Server 7.0. Do you know something about changes for 7.0
and do you have idea what should I do to put database back on line. I can even drop it to recreate and restore.
Thank you,
Anny
Greetings
Can anyone tell me what a jagged red line next to the server symbol in the enterprise manager means?. (Also how can I get rid of it.) It started when I was practicing the sp_attach_db / sp_detach_db procedures. I have looked at all the symbols in the on line books but it is not shown.
Many thanks in advance.
I am having problems running sqlmaint against my servers.
From a command line I am running c:sqlmaint -S servername -U "username" -A "password" -D database -UpdSts as a test.
All i get is the list of arguments displayed. This never seems to work.
Any Ideas??