How can I display data that only compare the date part (ignoring the time part) between the value of the date parameter and the database?. It displays data only if I pass the whole date (date and time)
I tried with the following query in the report services 2000, but it even didn't pass the query parse
SELECT * FROM table
WHERE (CONVERT(CHAR(8), table.PRODUCTION_DATE, 112)
= CONVERT(CHAR(8), @parameterDate, 112))
I need "conditional" cascading parameters: In Report Manager when one changes parameter 1, parameter 2 get changed based on parameter 1. Optionally, one can also enter values to parameter 2 directly.
I was able to achieve this in SSRS 2000 (SP2) with the following setups. SSRS 2005 and SP1 no longer works - Parameter 2 always shows its default value regardless whether one select a value in Parameter 1 or not.
Parameter 1 available values: from query default values: non query (specify a value "<None>") Parameter 2 available values: Non query (no value specified) default values: from query (based on Parameter 1)
It seems to me that the default value in SSRS 2000 is considered as cascading parameter. But it is no longer the case in SSRS 2005.
Is this a SSRS 2005 bug? is there any other work arounds or suggestions?
I have a very beginer's question. I am trying to compare datetime field with time only. how can i just compare with time?
Select start_time,end_time from tblvouchers as sv,tblvoucherlines as svl where sv.voucher_no = svl.voucher_no and sv.equip_no = '01325' and svl.line_date ='03/14/2004' and svl.start_time = '18:00' and svl.end_time = '00:00'
Does anybody knows how to remove the time part of the datetime format?
some tables in my database's using datetime format, and the time's not default (12:00:00 AM) but it save the exact time. Example : 7/17/2007 11:02:06 AM
when i use datetime for parameters, there's no value returned. While it's impossible for users to entered the exact time when they want to preview reports.
So, how to remove the time part in datetime format?
I've been using the GetDate() function to populate a column in a table. But it populates it with both the date and time: 2000-11-08 11:22:28
I'd like it to just put in the date: 2000-11-08
I've tried the Convert function as well as other functions, to no avail. Some attempts have reversed month and day (I'm in Australia, so all PCs and Servers are set with a dd-mm-yy date format)
I'm trying to extract the time part of a smalldatetime field in a usprocedure to return just the time. I've used Datepart() to get the hours or minutes but you can't get both without getting messy. Anyone know a way to keep it neat & simple?
I have writen a nested stored procedure when i am passing a datetime paramter from the first procedure into the internally called procedure it is dropping the time part.
I wrote the query like this "select datepart(year, Msg_Time) from C20_Messages" This query result is:- 2006 2006 2006 2005 2005 2005 2005 Here I want to get only the year part without repeating. I mean 2005 2006
In the hereunder written message I talk about point in time restore.It is now based upon the fact that there are no hardware problems or what soever.I just would like to roll back to a situation of some time (minutes, hoursor what ever) ago.Used to the ingres database a point in time restore can take place UP toany, any, any time since the last FULL backup. (any time up to now !!!)I can't understand why a point in time restore can only be done based upontransaction log backups. The current transaction log is also available in myopinion. (Turn off the power, turn on the power and you will notice that theautomatic recovery is based upon this transaction log file; so in that casethis file is used)That's what my question is about. Is it correct that a point in time restorein a SQL server environment can only be done up to the last transaction logbackup.ByeArno de Jong,The Netherlands.
I have 2 tables (table1KKK, table2KKK), and want to run the same query on them by using parameter with the value "1" or "2". Is it possible to use that parameter as a part of the queried table name? Something like (only for demonstration €“ doesn€™t work): Select * From table +myParameter + kkk Thanks in advance!
We have 2 databases ( Guider and Talker ) and we have a WCF service that is logged in with a domain identity.
In our SQL Server we have the service ID added to the Data Server Logins and both Guider and Talker are given access to the user.
When we access Guider we have no problems getting data.
When we access Talker we have a login failure:
Cannot open database 'Talker' requested by the login. The login failed.
Login failed for user 'AcornCommunicationServices'.
The thing that gets me is that the user is created at the Server level, in both Databases, and at the server level both databases are checked for the user. master has been set as the default database for the user.
Basically, as far as I can see Talker and Guider are configured identically! So I cannot figure out why I cannot login to the second database!
Is there a specific setting I'm missing somewhere to grant login access to the user? I'm using
From the table above the current running shift is Id = 1
Based on that I have following question:
1 - Is there a way to specified for a DateTime field that it will recieved only Time part ?
2 - When a shift change occurs, I need to compare the Current time with the time shift in the table. Then according to that I set the IsCurrent flag to proper new Shift ID.. how to perform this ?
I hope to update a DateTime column value with a Time input parameter.  Poor attempt below but it looks like the @ApptTime param is coming in as 10:45:00.0000000 and I might have an existing @SendOnDate as: 2015-10-05 07:00:00.000...I hope to end up with 2015-10-05 10:45:00.000
ALTER PROCEDURE [dbo].[SendEditUPDATE] @QuePoolID int=null ,@ApptTime time(7) ,@SendOnDate datetime
Hi, Could you tell me if this is possible? How do I return results using an entire column as part of the search parameter? I need to do this in the sql rather than selecting the contents and iterating through it as it would take too long.
eg. CREATE TABLE [dbo].[tPopupKeywords]( [id] [int] IDENTITY(1,1) NOT FOR REPLICATION NOT NULL, [title] [nvarchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL, [description] [nvarchar](2000) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ) ON [PRIMARY]
INSERT INTO dbo.tPopupKeywords(title, description) SELECT 'check', 'desc' UNION ALL SELECT 'for', 'desc' UNION ALL SELECT 'keywords', 'desc'
select dbo.tpopupkeywords.title where 'This is an example of a passed in string to check if any keywords are returned.' LIKE '% ' + dbo.tpopupkeywords.title + ' %' --Does this bit need to do a select??
I am passing the partameters to MS Report Viewer control to view the report. It is working fine with normal parameters like 'abc', 'Jon' etc. But fails with parameters having special characters like 'abc+', 'Version 1.1 Part 1', 'R1.8 RC' throws error " The parameter is missing a value"
I have SSRS 2005 SP2 configured to work in Sharepoint integration. Everything works fine except that I am not able to programmatically change any property of report viewer web part (instance) that I have added on on home page of my sharepoint site. I can do same thing via sharepoint UI but not through program. When my programs runs it fetches all web parts been added on home page, then I need to iterate through each one and find report viewer web part. While iterating, as soon as I arrive to report viewer web part it is named as "Error web part" with error message as "Windows SharePoint Services cannot deserialize the Web Part. Check the format of the properties and try again"
If someone has a solution, please respond at your earlist.
I have a table with a column named measurement decimal(18,1). If the value is 2.0, I want the stored proc to return 2 but if the value is 2.5 I want the stored proc to return 2.5. So if the value after the decimal point is 0, I only want the stored proc to return the integer portion. Is there a sql function that I can use to determine what the fraction part of the decimal value is? In c#, I can use dr["measurement "].ToString().Split(".".ToCharArray())[1] to see what the value after the decimal is.
Hello all, I got a problem when using Sql Service 2005. I have two parameters @ID and @Name. I want to choose either and only one parameter to generate my report at one time. Could anyone tell me how to do it? I tried the "or" tab after filter tab, but it only generate the report with both @ID and @name values I gave. Thanks in advance.
If I use the following query for a Dataset and the execution takes a few seconds to show results
SELECT *
FROM dbo.ICParameter
WHERE (PatientID = @ID ) AND (LogTime > DATEADD(day, -1, GETDATE()))
ORDER BY LogTime
If I replace '99010200101' with @ID and enter '99010200101' when prompted for ID, the execution takes forever. Actually I have never got any results even after waiting for 10 minutes.
I am trying to set parameter in reporting services that lets the user select "All Hours" or "Cour Hours" of the day in a given date range.
Core hours would filter the transactions (and aggregations) that happened between 6am and 10pm on certain days and another range of hours on some days. The days that the core hours exist will be static. i.e. every day the core hours are 6am to 10pm but on Mondays the core hours are Midnight to 2am and then 6am to 11:59:59.
I am trying to figure out what that code would look like. Any help is appreciated.
I'm pretty new at this, writing SQL and reporting services. I created a report with a date parameter. I need the report to ignore the timestamp. My @Startdate is fine because the timestamps is at 12:00:00AM but my @EndDate also has this timestamp. I need to pull all the data up to the end date the user enters without taking the timestamp into consideration.
If someone can help me out with, I would greatly appreciate it.
I have a problem with Date/Time parameters. When I try to preview reports locally, I get the following error message for dates past the 12th of a month:Â
An error occured during local report processing. The value provided for the report parameter 'Date' is not valid for its type.
My report is set to de-CH. If I enter a date into the datepicker in Swiss/German format (dd.mm.yyyy) Visual Studio changes them to mm/dd/yyyy but somehow tests them against dd.mm.yyyy and throws an error.
Windows language is German, SQL Server and Visual Studio are in English.
I installed the German language pack for Visual Studio and switched over to German to no avail. Changing the report language to en-US did not work either.
1. I have a parameter @Param1 that accepts multiple values
2. I have to display data based on selected values of @Param1Â
Here comes the tricky part.
3. I have to aggregate on all the available values of the @Param1 Â Do I need to take a hidden parameter just for aggregation? Or is there any other way?
In my report I have two date parameters, both are of type DateTime. The problem is that when the report is called for the first time the report parameter value is not shown in the expected format (de-DE, 01.01.2007) but in en-US 01/01/2007 Only when I change a Date using the calendar popup and click on the "show report" button, the right format will be taken over.
Language properties of the report are"=User!Language" IE language is de-DE. Report Server is a MS Windows Server 2003 R2 Standart Edition SP2 with MS SQL SERVER 2005 SP2
P.S. on a server with MS SQL SERVER 2005 SP1, this report works fine. may be this bug is a new feature of SP2?
