How To Update Group Of Records In SQL Statement Or Stored Procedure
Dec 5, 2007
I have a query that brings back the data below. I need to divide the BudgetTotal by the Count. Then I need to go to the records that make up those €œgroups€? and enter a Budget value = BudgetTotal/Count.
How could I write this in a stored procedure or a SQL statement if possible?
Thanks.
Kevin
SELECT TOP 100 PERCENT dbo.ReportTable.ProjectNo, dbo.ReportTable.Category, dbo.ReportTable.Type, COUNT(dbo.ReportTable.ProjectNo) AS count,
dbo.ReportTable.Budget, dbo.OracleDownloadBudget.Budget AS Expr1
FROM dbo.ReportTable INNER JOIN
dbo.OracleDownloadBudget ON dbo.ReportTable.Category = dbo.OracleDownloadBudget.Category AND
dbo.ReportTable.ProjectNo = dbo.OracleDownloadBudget.Project AND dbo.ReportTable.Type = dbo.OracleDownloadBudget.Type
GROUP BY dbo.ReportTable.ProjectNo, dbo.ReportTable.ProjectName, dbo.ReportTable.Category, dbo.ReportTable.Type, dbo.ReportTable.Budget, dbo.OracleDownloadBudget.Budget
HAVING (dbo.ReportTable.Budget < 1)
ORDER BY dbo.ReportTable.ProjectNo
I'm writing a fairly involved stored procedure. In this Stored Procedure, I have an update statement, followed by a select statement. The results of the select statement should be effected by the previous update statement, but its not. When the stored procedure is finish, the update statement seemed to have worked though, so it is working.
I suspect I need something, like a GO statement, but that doesnt seem to work for a stored procedure. Can anyone offer some assistance?
I am trying to put together a Stored Procedure that runs other SP's based on a records found condition. Sometimes my update table either by deleting duplicates or for other reasons is empty. Running a SP to update records on a table is not needed.
IF EXISTS (SELECT TOP 1 * FROM Work_Tables.dbo.Trace_Return_Updates WHERE TR_RecType = 'CT1') BEGIN EXEC IMB_Trace_Data.dbo.Update_CT1_Trace_Data END
IF EXISTS (SELECT TOP 1 * FROM Work_Tables.dbo.Trace_Return_Updates WHERE TR_RecType = 'CT2') BEGIN EXEC IMB_Trace_Data.dbo.Update_CT2_Trace_Data END
IF EXISTS (SELECT TOP 1 * FROM Work_Tables.dbo.Trace_Return_Updates WHERE TR_RecType = 'FULF') BEGIN EXEC IMB_Trace_Data.dbo.Update_FULF_Trace_Data END
I want to run a stored procedure which updates a password. I have the a table 'users' which has columns 'name' (as primary key) and 'pwd', which hold the username and password respectively. The stored procedure accepts @username (the username), @pwdOld and @pwdNew (the old and new passwords).
The following procedure returns 1 if the user inputs the correct old password.
The following procedure updates the old password to the new password. So job done.
strCreateStoredProcedure = " " & _
"CREATE PROC changePassword2 " & _ "( " & _
"@userName VarChar(20), " & _
"@pwdOld VarChar(50), " & _
"@pwdNew VarChar(50) " & _ ") " & _ "AS " & _
"Declare @name VarChar(20) " & _
"Declare @actualPassword VarChar(50) " & _
" UPDATE users " & _
" SET pwd = @pwdNew " & _
" WHERE name = @userName "
But using two procedures must be inefficient and slow. However, I have not been able to combine the two. I would have thought I should be able to replace "return 1" in the first procedure with the UPDATE statement in the second procedure but I cannot save this procedure. i.e.
How to compare the Test_Result Column With Normal Values and Update the Test_Status Column for multiple rows in Transaction Table.
If my Test_Result value is less than Low Value of Normal_Values then i need to Update Test_Status as L and if Test_Result value is greater than High Value of Normal_Values then i need to Update Test_Status as H and if the Test_Result Value is in between Low and High Value of Normal_Values then i need to update a blank space
I need to run a sequel statement in a stored procedure and get if it found any records because the next statements depend on if records were found or not. How do I do this?
I am trying to create a stored procedure that will take a text value passed from an application and update a table using the corresponding integer value using a CASE statement. I get the error: Incorrect syntax near the keyword 'SET' when I execute the creation of the SP. What am I missing here? This looks to me like it should work. Here is my code.
CREATE PROCEDURE OfficeMove
-- Add the parameters for the stored procedure here
@UserName nvarchar(10),
@NewLocation nchar(5),
@NewCity nvarchar(250)
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
-- Insert statements for procedure here
Execute as user = '***'
DELETE FROM [SQLSZD].[SZDDB].dbo.Employee_Office_Assignments
WHERE User_Name = @UserName
INSERT INTO [SQLSZD].[SZDDB].dbo.Employee_Office_Assignments
I'm bulk loading employees into an etl table, each employee has a unique ID number, but they have multiple records in the data. Sometimes their name or birthdate will change and I want to identify those records and only insert the newest version into production. I can do this with a series of temp tables, but I'm sure there's a better way. The SQL below updates the etl table with the flag I want to mark the inserts, but it seems convoluted. (Jon's birthday changes, Jane's birthday changes, Bill's gender changes, Amy nothing changes(I handle those inserts later))
I recently had an interview and the interviewer has asked me to use a group by clause in an update statement. Here is the table and data:
Table name: Customer cust Size Geo Segment BP LG EU Accenture LG US MSC MED US SclumbergerLG US
So the request is to update the Segment column with a unique number starting with number 1.
So for BP it should be 1, Accenture it should be 2, MSC it should be 3, Sclumberger should be 1 since the size and geo are not unique. He asked me to use a group by size and geo to generate a unique number for each combination and than make the update.
I have a pretty complex query that returns three records. For simplicity sake, the results can be simulated with this query:
Select 5 AS InternalAuditTeamEmployeeID, 1 as InternalAuditTeamID UNION ALL Select 11, 2 UNION ALL Select 14, 3;
I want to take this result and update the Flag field to true in my table tblInternalAuditTeamEmployee (CREATE statement below) for any InternalAuditTeamEmployeeID that is less than or equal to the ones in the results above, but by group. My results would look something like this using the data below and the results above.
I was thinking I could somehow use ROW_NUMBER(PARTITION BY InternalAuditTeamID ORDER BY InternalAuditTeamEmployeeID DESC), but not sure how to get the results of "WHERE <= InternalAuditTeamEmployeeID For each particular group".
CREATE TABLE STATEMENT:
CREATE TABLE [tblInternalAuditTeamEmployee]( [InternalAuditTeamEmployeeID] [int] IDENTITY(1,1) NOT NULL, [InternalAuditTeamID] [int] NOT NULL, [EmployeeID] [int] NOT NULL,
I am trying to use SQL to pull unique records from a large table. The table consists of people with in and out dates. Some people have duplicate entries with the same IN and OUT dates, others have duplicate IN dates but sometimes are missing an OUT date, and some don’t have an IN date but have an OUT date.
What I need to do is pull a report of all Unique Names with Unique IN and OUT dates (and not pull duplicate IN and OUT dates based on the Name).
I have tried 2 statements:
#1: SELECT DISTINCT tblTable1.Name, tblTable1.INDate FROM tblTable1 WHERE (((tblTable1.Priority)="high") AND ((tblTable1.ReportDate)>#12/27/2013#)) GROUP BY tblTable1.Name, tblTable1.INDate ORDER BY tblTable1.Name;
#2: SELECT DISTINCT tblTable1.Name, tblTable1.INDate FROM tblTable1 WHERE (((tblTable1.Priority)="high") AND ((tblTable1.ReportDate)>#12/27/2013#)) UNION SELECT DISTINCT tblTable1.Name, tblTable1.INDate FROM tblTable1 WHERE (((tblTable1.Priority)="high") AND ((tblTable1.ReportDate)>#12/27/2013#));
Both of these work great… until I the OUT date. Once it starts to pull the outdate, it also pulls all those who have a duplicate IN date but the OUT date is missing.
Example:
NameINOUT John Smith1/1/20141/2/2014 John Smith1/1/2014(blank)
I am very new to SQL and I am pretty sure I am missing something very simple… Is there a statement that can filter to ensure no duplicates appear on the query?
I have a a Group By query which is working fine aggregating records by city. Â Now I have a requirement to focus on one city and then group the other cities to 'Other'. Â Here is the query which works:
Select [City]= CASE WHEN [City] = 'St. Louis' THEN 'St. Louis' ELSE 'Other Missouri City' END, SUM([Cars]) AS 'Total Cars'Â From [Output-MarketAnalysis] Where [City] IN ('St. Louis','Kansas City','Columbia', 'Jefferson City','Joplin') AND [Status] = 'Active' Group by [City]
Here is the result:
St. Louis 1000 Kansas City 800 Columbia 700 Jefferson City 650 Joplin 300
When I add this Case When statement to roll up the city information it changes the name of the city to 'Other Missouri City' however it does not aggregate all Cities with the value 'Other Missouri City':
Select [City]= CASE WHEN [City] = 'St. Louis' THEN 'St. Louis' ELSE 'Other Missouri City' END, SUM([Cars]) AS 'Total Cars'Â From [Output-MarketAnalysis] Where [City] IN ('St. Louis','Kansas City','Columbia', 'Jefferson City','Joplin') AND [Status] = 'Active' Group by [City]
Here is the result:
St. Louis 1000 Other Missouri City 800 Other Missouri City 700 Other Missouri City 650 Other Missouri City 300
TRUNCATE TABLE [Temp_Export]; INSERT INTO [Temp_Export] (
[Code]....
The issue I'm having is that I am getting more records in the VIEW than records updated. What can explain such a discrepancy? I am updating the records based on the PK/FK Temp_Import_ID column, which exists in both tables. where the view would yield more records than those matched by the update statement?
I am renovating an existing application and am converting the existing passwords into hashed values using SHA1. I know how to compute the hashed values as a byte array for each record. What I don't know how to do easily is update all of the records i a single call to the database. Normally, I would just do the following:UPDATE HashedPassword = someValue WHERE UserID = 101; UPDATE HashedPassword = someOtherValue WHERE UserID = 102; ...
What I don't know is what someValue and someOtherValue should be. How do I convert my byte array into string representation that SQL will accept? I usually execute multiple statements using Dim oCmd as New SqlCommand(sSQL, MyConn) and then call oCmd.ExecuteNonQuery(). Alternatively, I found the following code that uses the byte array directly but only shows a single statement. How could I use it to execute multiple statements as shown above?'FROM http://aspnet.4guysfromrolla.com/articles/103002-1.2.aspx
'2. Create a command object for the query Dim strSQL as String = _ "INSERT INTO UserAccount(Username,Password) " & _ "VALUES(@Username, @Password)" Dim objCmd as New SqlCommand(strSQL, objConn)
'3. Create parameters Dim paramUsername as SqlParameter paramUsername = New SqlParameter("@Username", SqlDbType.VarChar, 25) paramUsername.Value = txtUsername.Text objCmd.Parameters.Add(paramUsername)
Dim paramPwd as SqlParameter paramPwd = New SqlParameter("@Password", SqlDbType.Binary, 16) paramPwd.Value = hashedBytes objCmd.Parameters.Add(paramPwd)
'Insert the records into the database objConn.Open() objCmd.ExecuteNonQuery() objConn.Close()
SELECT SUM(PTR_QUANTITY) OVER (PARTITION BY PTR_SYMBOL ORDER BY PTR_DATE, PTR_SEQUENCE) AS 'ACUMULADO' FROM MPR_portfolio_transactions ORDER BY PTR_SYMBOL, PTR_DATE, PTR_SEQUENCE
This select statement generates one line per existing record. And what I would like to do next is to UPDATE the field 'PTR_ACUM' with the result of the 'ACUMULADO'
I have this update statement that works for one record. How do I write it to include multiple records at once. Please see sample below.
update mklopt set  FRMDAT = '12/31/2014' where  JOBCOD = 'PH14789'Â
I also want to include the following instead of running it one at a time
PH17523Â Â Â Â PH17524Â Â Â Â PH17525Â Â Â Â PH17553Â Â Â Â PH17555Â Â Â Â PH17556Â Â Â Â PH17557Â Â Â Â PH17558Â Â Â Â PH17571Â Â Â Â PH17573Â Â Â Â PH17574Â Â Â Â PH17575Â Â Â Â PH17576Â Â Â Â PH17577Â Â Â Â PH1757
hi need help how to send an email from database mail on row update from stored PROCEDURE multi update but i need to send a personal email evry employee get an email on row update like send one after one email
i use FUNCTION i get on this forum to use split from multi update
how to loop for evry update send an single eamil to evry employee ID send one email
I am trying to to a transaction count (per day) running a stored procedure that does a group by date. The problem is that since the date has a time stamp (I assume) it sees each date as a different group even if it's the same day. Is there a way to format the date in the stored procedure so that it sees all of the transactions on the same day as one or is there another way to do this. Select count(recordid),transactiondatefrom sometable group by transactiondate Thanks in advance
I wrote a stored proc to be implemented in a datagrid. I went and used it on a record to update some information and it updated THE WHOLE DATABASE WITH THAT ONE RECORD..
IF anyone could shead some light on what I'm doing wrong that would be great.
best solution for this stored procedure query.I'm getting the following error:
Column 'dbo.Applicants.submitted' is invalid in the select list because it is not contained in an aggregate function and there is no GROUP BY clause. Here is my select query:
Code: SELECT DISTINCT DATENAME(MONTH, submitted) AS mon, MAX(submitted) AS SubmitDate FROM dbo.Applicants WHERE ((CASE WHEN MONTH(submitted) > 8 THEN YEAR(submitted) + 1 ELSE YEAR(submitted) END) = @AcYr) ORDER BY SubmitDate
The submitted field is a date field.I don't want to add the submitted field to Group By as I want to group by month not date.Is there any solution to avoid grouping by date?
Hi i am trying to get the following result: CALCULATE THE CURRENT NUMBER OF SHARES on base of number of shares bought and number of shares sold
so the logic is int total if transactiontype is "buy", total = total + amount bought if transactiontype is sell, total = total-amount sold plus must be grouped by share
base data are stored in 1 table as share name transaction type share amount tesco buy 200 tesco sell 50
sounds rather easy does it not? well sql syntax must be very foreign to me as i do not manage it I tried a few options: 1 to write a database function as above and then call it from sproc but i need to use group by share name or id so it calculates for each share and it will not let me to use function in select with group by 2 i tried to use if within sproc but i get complain incorrect syntax (I use MSDE database accessed via Visual) - I think it suppose to be possible but it throws me out with the most simple if or = is there some special syntax? 3 I created 2 views: 1 view: all sold shares, 2nd view: all bought shares and their bought/sold quantities as in select share name, sum(sharequantity) where transaction = sell from table group by share name and the same for purchases then I did union of these 2 views with boughtquantity - soldquantity what worked but it only showed me shares which were sold, if share was never sold it was not shown I guess due to union so I am still stuck!
I am trying to insert a record in a SQL2005 Express database. I can use the sp fine and it works inside of the database, but when I try to launch it via ASP.NET it fails... here is the code. I realize it is not complete, but the only required field is defined via hard code. The error I am getting states it cannot find "sp_InserOrder"
=== Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click Dim conn As SqlConnection = Nothing Dim trans As SqlTransaction = Nothing Dim cmd As SqlCommand conn = New SqlConnection(ConfigurationManager.ConnectionStrings("PartsConnectionString").ConnectionString) conn.Open() trans = conn.BeginTransaction cmd = New SqlCommand() cmd.Connection = conn cmd.Transaction = trans cmd.CommandText = "usp_InserOrder" cmd.CommandType = Data.CommandType.StoredProcedure cmd.Parameters.Add("@MaterialID", Data.SqlDbType.Int) cmd.Parameters.Add("@OpenItem", Data.SqlDbType.Bit) cmd.Parameters("@MaterialID").Value = 3 cmd.ExecuteNonQuery() trans.Commit() =====
I get an error stating cannot find stored procedure. I added the Network Service account full access to the Web Site Directory, which is currently running locally on Windows XP Pro SP2.
Please help, I am a newb and lost...as you can tell from my code...
Creating a stored procedure to insert records into multiple rows.
Let's say we have 3 colums in procedure to insert, col3 has a max limit of 1000, if col3 data exceeds limit it has insert into next row and vice versa.
Hi, I need to know whether a stored procedure returns only a single record or it can return more than one if the query if for example to return all records in a specific date range. Thanks.
I have two tables called A and B and C. Where A and C has the same schema
A contains the following columns and values ------------------------------------------- TaskId PoId Podate Approved
1 2 2008-07-07 No 3 4 2007-05-05 No 5 5 2005-08-06 Yes 2 6 2006-07-07 Yes
Table B contains the following columns and values ------------------------------------------------- TaskId TableName Fromdate Approved_Status
1 A 7/7/2007 No 3 B 2/4/2006 Yes
Now i need to create a stored procedure that should accept the values (Yes/No) from the Approved_Status column in Table B and should look for the same values in the Approved column in Table A. If both values match then the corresponding rows in Table A should be archived in table C which has the same schema as that of Table A. That is the matching columns should get deleted from Table A and shoud be inserted into Table C. In both the tables A and i have the column TaskId as the common column
I have a Execute SQL Task I get some values from a table onto three variables. Next step in a DFT, I try to execute a stored proc by passing these variables as parameters.
This is the syntax i use, in the parameters tab of the DFT I ensured that all the parameters are correctly mapped.
When I run the package, it executes successfully but no rows are fectched. I tried running the stored proc manually in the database, and it seems to work fine.
I have two tables called A and B and C. Where A and C has the same schema A contains the following columns and values-------------------------------------------TaskId PoId Podate Approved 1 2 2008-07-07 No 3 4 2007-05-05 No 5 5 2005-08-06 Yes 2 6 2006-07-07 Yes Table B contains the following columns and values-------------------------------------------------TaskId TableName Fromdate Approved_Status 1 A 7/7/2007 No3 B 2/4/2006 Yes Now i need to create a stored procedure that should accept the values (Yes/No) from the Approved_Status column in Table B and should look for the same values in the Approved column in Table A. If both values match then the corresponding rows in Table A should be archived in table C which has the same schema as that of Table A. That is the matching columns should get deleted from Table A and shoud be inserted into Table C. In both the tables A and B i have the TaskId as the common column Pls provide me with full stored procedure code.
select distinct pd.productcategory,pd.imagepath,pd.[description],p.productid,p.[name] ,p.designer,p.weight,p.price from productdescription pd inner join products p on pd.productcategory=p.productcategory where @prodcat=p.productcategory order by p.productid
return
My Results are:
ProductCategory ProductID (Rest of the columns) 22 47 22 47 22 58 22 58
In my productdescription table there are 2 rows in the productcategory column which has number 22. In the products table there are 2 rows(productid 47&58) in the productcategory column which has number 22. I believe this is many to many relationship problem but I do not know how to correct it. My results need to show only 2 records and not 4.
