How To Use DIMENSION PROPERTIES Syntax In MDX For A Dataset
Dec 20, 2007
Hi,
I tried to retreive dimension member properties using DIMENSION PROPERTIES syntax in a dataset for a report, is this possible?
What is the correct syntax? a working example will be appreciated since I could not make it work somehow .
Thanks for your attention.
Yongli
View 3 Replies
ADVERTISEMENT
May 21, 2008
Hello SSAS gurus,
Recently i started learning working on Analysis services and writing MDX expressions, so please forgive my ignorance if this is a trivial question.
I ran out of s. Don't know what I should do to fix this. Please point me in the right direction.
We have a cube with one fact table(Imperative Fact) and two dimensions (Client, Client Imperative). A Client has several Imperatives. One of the attributes of Client Imperative dimension is Target Outcome. This is a text field.
We created a measure Client Imperative Count that gives the number of imperatives a client has.
The business defined 'Client Imperative' KPI as following :
If client has 1 or more imperatives and has Target outcome then show green. If client has 1 or more imperatives and does not haveTarget outcome then show yellow. if the client does not have imperative then show red.
Wrote the following KPI Status expression but it doesn't seem to work. Hitting a dead end. couldn't figure this out.
Code Snippet
Case
When
[Measures].[Client Imperatives Count] > 0
And
([Client Imperatives].[TRGT OTCM].currentmember <> null)
or
(Not IsEmpty([Client Imperatives].[TRGT OTCM].currentmember))
Then 1
When
[Measures].[Client Imperatives Count] > 0
And
([Client Imperatives].[TRGT OTCM].currentmember = null)
or
(IsEmpty([Client Imperatives].[TRGT OTCM].currentmember))
Then 0
Else
-1
End
Tried [Client Imperatives].[TRGT OTCM].value but didn't work.
Also, tried to create a calculated member for Target Outcome using following code. It is not working either.
Code Snippet
CALCULATE;
CREATE MEMBER CURRENTCUBE.[MEASURES].[Target Outcome]
AS case
when
[Client Imperatives].[TRGT OTCM].currentmember = [Client Imperatives].[TRGT OTCM].&[]
then 0
else 1
end,
VISIBLE = 1 ;
Trying to figure this out since two days. Somebody please help me.
I appreciate your help.
View 3 Replies
View Related
Dec 29, 2007
I have a subtotal that I want to compare to a value to determine the color property that it will appear on the report in - how can I do this. Essentially, if the department is overbudget the value should be red, if the department is within budget the value should be black.......
what is the correct syntex to do this......
if (Sum(Fields!Value.Value) > (fields!budget.value) then
(Sum(Fields!Value.Value) =Red
else
(Sum(Fields!Value.Value) =Black
end if
View 8 Replies
View Related
Oct 26, 2015
When i add a dimension to the cube dimension without any relation in my dimension usage to any measure group my units are going down.However when i remove the dimension from the cube am getting the correct values.
View 4 Replies
View Related
Mar 16, 2015
I have an ODBC connection string that is working fine with the following properties:
Database="XXXXXXX",Network="YYYYYY"; strangely no server is specified in the string, but it is specified in the ODBC Connection file.
I am trying to do a new server registration in SSMS for this database.However, I don't understand where the network spec is placed.
Under Registered server name I've tried:
YYYYYYXXXXX
When I browse the server for the database instance list, I receive "network path was not found".
I even tried:"XXXXXXX",Network="YYYYYY" for the registered server name.Same error message.
What am I doing wrong ?
View 1 Replies
View Related
May 26, 2015
I have a report with multiple datasets, the first of which pulls in data based on user entered parameters (sales date range and property use codes). Dataset1 pulls property id's and other sales data from a table (2014_COST) based on the user's parameters. I have set up another table (AUDITS) that I would like to use in dataset6. This table has 3 columns (Property ID's, Sales Price and Sales Date). I would like for dataset6 to pull the Property ID's that are NOT contained in the results from dataset1. In other words, I'd like the results of dataset6 to show me the property id's that are contained in the AUDITS table but which are not being pulled into dataset1. Both tables are in the same database.
View 0 Replies
View Related
Oct 1, 2015
I have a small number of rows in a dataset, Table 1. There is a CLOB on a large dataset, Table 2. They join on a PK. I would like to retrieve this CLOB and add it to the data flow for Table1. In short I want to emulate the following:
Table 1: Small table without CLOB, 10 rows.
Table 2: Large table with CLOB, 10,000,000 rows
select CLOB
from table2
where pk = (select pk from table1)
I want this to return the CLOBs for the small number of rows in Table 1. The PK is indexed obviously so it should be a fast look up.
Table 1 and Table 2 live on different Oracle databases. How do I perform this operation efficiently in SSIS? It seems the Lookup and Merge Join wont do this.
View 2 Replies
View Related
May 27, 2015
I have a report with multiple datasets, the first of which pulls in data based on user entered parameters (sales date range and property use codes). Dataset1 pulls property id's and other sales data from a table (2014_COST) based on the user's parameters.
I have set up another table (AUDITS) that I would like to use in dataset6. This table has 3 columns (Property ID's, Sales Price and Sales Date). I would like for dataset6 to pull the Property ID's that are NOT contained in the results from dataset1. In other words, I'd like the results of dataset6 to show me the property id's that are contained in the AUDITS table but which are not being pulled into dataset1. Both tables are in the same database.
View 3 Replies
View Related
May 21, 2007
I found out the data I need for my SQL Report is already defined in a dynamic dataset on another web service. Is there a way to use web services to call another web service to get the dataset I need to generate a report? Examples would help if you have any, thanks for looking
View 2 Replies
View Related
May 19, 2008
Hi!
Need some help building a query that does the following :
I have 2 Time Dimensions ; Time (Transdate) and ClosedDate (ClosedDate)
In my report/query, if [Time].CurrentMember = [Time].[YMD].[YMD].[2006].[200610].[20061031] I want to FILTER out all ClosedDate < [ClosedDate].[YMD].[YMD].[2006].[200610].[20061031]
Both Time Dimensions are Year -> Month -> Day and have the same Members.
I have every option available, using calculated Members and/or Measures to do this.
The report I'm creating is Aging of Receivables : Balance / 30 days / 60 days / etc.. But for the Aging, I need to filter like explained above.
Appreciate all help!
Regards,
Stian Bakke
View 3 Replies
View Related
Oct 12, 2007
Is there any way to display this information in the report?
Thanks
View 3 Replies
View Related
May 7, 2008
Hi,
I have a stored procedure attached below. It returns 2 rows in the SQL Management studio when I execute MyStorProc 0,28. But in my program which uses ADOHelper, it returns a dataset with tables.count=0.
if I comment out the line --If @Status = 0 then it returns the rows. Obviously it does not stop in
if @Status=0 even if I pass @status=0. What am I doing wrong?
Any help is appreciated.
ALTER PROCEDURE [dbo].[MyStorProc]
(
@Status smallint,
@RowCount int = NULL,
@FacilityId numeric(10,0) = NULL,
@QueueID numeric (10,0)= NULL,
@VendorId numeric(10, 0) = NULL
)
AS
SET NOCOUNT ON
SET CONCAT_NULL_YIELDS_NULL OFF
If @Status = 0
BEGIN
SELECT ......
END
If @Status = 1
BEGIN
SELECT......
END
View 4 Replies
View Related
Apr 11, 2008
i have two datasets.one dataset have old data from some other database.second dataset have original data from sql server 2005 database.both database have same field having id as a primary key.i want to transfer all the data from first dataset to new dataset retaining the previous data but if old dataset have the same id(primary key) as in the new one then that row will not transfer.
but if the id(primary key) have changed values then the fields updated with that data.how can i do that.
View 4 Replies
View Related
Dec 19, 2006
Hi,
I have two datasets in my report, D1 and D2.
D1 is a list of classes with classid and title
D2 is a list of data. each row in D2 has a classid. D2 may or may not have all the classids in D1. all classids in D2 must be in D1.
I want to show fields in D2 and group the data with classids in D1 and show every group as a seperate table. If no data in D2 is available for a classid, It shows a empty table.
Is there any way to do this in RS2005?
View 2 Replies
View Related
May 20, 2008
Why does the following call to a stored procedure get me this error:
Msg 156, Level 15, State 1, Line 1
Incorrect syntax near the keyword 'CONVERT'.
Code Snippet
EXECUTE OpenInvoiceItemSP_RAM CONVERT(DATETIME,'01-01-2008'), CONVERT(DATETIME,'04/30/2008') , 1,'81350'
The stored procedure accepts two datetime parameters, followed by an INT and a varchar(10) in that order.
I can't find anything wrong in the syntax for CONVERT or any nearby items.
Help me please. Thank you.
View 7 Replies
View Related
Sep 3, 2015
Using this IIF statement:
=CountDistinct(IIF(Fields!Released_DT.Value = Fields!Date2.Value, Fields!Name.Value,
Nothing))
Released_DT = a date - 09/03/2015 or 09/02/2015
Date2 = returns another date value in this case 09/03/2015
What I'm trying to do is: count distinct number of people (Fields!Name.Value) if the Relased_DT = Date2.My IIF statement is returning a zero value.
View 4 Replies
View Related
Dec 14, 2003
I keep receiving the following error whenever I try and call this function to update my database.
The code was working before, all I added was an extra field to update.
Exception Details: System.Data.SqlClient.SqlException: Incorrect syntax near the keyword 'WHERE'
Public Sub MasterList_Update(sender As Object, e As DataListCommandEventArgs)
Dim strProjectName, txtProjectDescription, intProjectID, strProjectState as String
Dim intEstDuration, dtmCreationDate, strCreatedBy, strProjectLead, dtmEstCompletionDate as String
strProjectName = CType(e.Item.FindControl("txtProjectName"), TextBox).Text
txtProjectDescription = CType(e.Item.FindControl("txtProjDesc"), TextBox).Text
strProjectState = CType(e.Item.FindControl("txtStatus"), TextBox).Text
intEstDuration = CType(e.Item.FindControl("txtDuration"), TextBox).Text
dtmCreationDate = CType(e.Item.FindControl("txtCreation"),TextBox).Text
strCreatedBy = CType(e.Item.FindControl("txtCreatedBy"),TextBox).Text
strProjectLead = CType(e.Item.FindControl("txtLead"),TextBox).Text
dtmEstCompletionDate = CType(e.Item.FindControl("txtComDate"),TextBox).Text
intProjectID = CType(e.Item.FindControl("lblProjectID"), Label).Text
Dim strSQL As String
strSQL = "Update tblProject " _
& "Set strProjectName = @strProjectName, " _
& "txtProjectDescription = @txtProjectDescription, " _
& "strProjectState = @strProjectState, " _
& "intEstDuration = @intEstDuration, " _
& "dtmCreationDate = @dtmCreationDate, " _
& "strCreatedBy = @strCreatedBy, " _
& "strProjectLead = @strProjectLead, " _
& "dtmEstCompletionDate = @dtmEstCompletionDate, " _
& "WHERE intProjectID = @intProjectID"
Dim myConnection As New SqlConnection(System.Configuration.ConfigurationSettings.AppSettings("connectionstring"))
Dim cmdSQL As New SqlCommand(strSQL, myConnection)
cmdSQL.Parameters.Add(new SqlParameter("@strProjectName", SqlDbType.NVarChar, 40))
cmdSQL.Parameters("@strProjectName").Value = strProjectName
cmdSQL.Parameters.Add(new SqlParameter("@txtProjectDescription", SqlDbType.NVarChar, 30))
cmdSQL.Parameters("@txtProjectDescription").Value = txtProjectDescription
cmdSQL.Parameters.Add(new SqlParameter("@strProjectState", SqlDbType.NVarChar, 30))
cmdSQL.Parameters("@strProjectState").Value = strProjectState
cmdSQL.Parameters.Add(new SqlParameter("@intEstDuration", SqlDbType.NVarChar, 60))
cmdSQL.Parameters("@intEstDuration").Value = intEstDuration
cmdSQL.Parameters.Add(new SqlParameter("@dtmCreationDate", SqlDbType.NVarChar, 15))
cmdSQL.Parameters("@dtmCreationDate").Value = dtmCreationDate
cmdSQL.Parameters.Add(new SqlParameter("@strCreatedBy", SqlDbType.NVarChar, 10))
cmdSQL.Parameters("@strCreatedBy").Value = strCreatedBy
cmdSQL.Parameters.Add(new SqlParameter("@strProjectLead", SqlDbType.NVarChar, 15))
cmdSQL.Parameters("@strProjectLead").Value = strProjectLead
cmdSQL.Parameters.Add(new SqlParameter("@dtmEstCompletionDate", SqlDbType.NVarChar, 24))
cmdSQL.Parameters("@dtmEstCompletionDate").Value = dtmEstCompletionDate
cmdSQL.Parameters.Add(new SqlParameter("@intProjectID", SqlDbType.NChar, 5))
cmdSQL.Parameters("@intProjectID").Value = intProjectID
myConnection.Open()
cmdSQL.ExecuteNonQuery
myConnection.Close()
MasterList.EditItemIndex = -1
BindMasterList()
End Sub
Thankyou in advance.
View 3 Replies
View Related
Mar 31, 2008
Forgive the noob question, but i'm still learning SQL everyday and was wondering which of the following is faster? I'm just gonna post parts of the SELECT statement that i've made changes to:
INNER JOIN Facilities f ON e.Facility = f.FacilityID AND f.Name = @FacilityName
OR
WHERE f.Name = @FacilityName
My question is whether or not the query runs faster if i put the condition within the JOIN line as opposed to putting in the WHERE line? Both ways seems to return the same results but the time difference between methods is staggering? Putting the condition within the JOIN line makes the query run about 3 times faster?
Again, forgive my lack of understanding, but could someone agree or disagree and give me the cliff-notes version of why or why not?
Thanks!
View 4 Replies
View Related
Sep 23, 2007
Ok I am tying to convert access syntax to Sql syntax to put it in a stored procedure or view..
Here is the part that I need to convert:
SELECT [2007_hours].proj_name, [2007_hours].task_name, [2007_hours].Employee,
IIf(Mid([task_name],1,3)='PTO','PTO_Holiday',
IIf(Mid([task_name],1,7)='Holiday','PTO_Holiday',
IIf(Mid([proj_name],1,9) In ('9900-2831','9900-2788'),'II Internal',
IIf(Mid([proj_name],1,9)='9900-2787','Sales',
IIf(Mid([proj_name],1,9)='9910-2799','Sales',
IIf(Mid([proj_name],1,9)='9920-2791','Sales',
)
)
)
)
) AS timeType, Sum([2007_hours].Hours) AS SumOfHours
from................
how can you convert it to sql syntax
I need to have a nested If statment which I can't do in sql (in sql I have to have select and from Together for example ( I can't do this in sql):
select ID, FName, LName
if(SUBSTRING(FirstName, 1, 4)= 'Mike')
Begin
Replace(FirstNam,'Mike','MikeTest')
if(SUBSTRING(LastName, 1, 4)= 'Kong')
Begin
Replace(LastNam,'Kong,'KongTest')
if(SUBSTRING(Address, 1, 4)= '1245')
Begin
.........
End
End
end
Case Statement might be the solution but i could not do it.
Your input will be appreciated
Thank you
View 5 Replies
View Related
Apr 5, 2007
Hi every body...
I have a probleme
I have a web Services which contains a method getValue(IDEq (int), idIndicator(int), startTime(dateTime), endTime(dateTime))
I need to call this method. But my problem is how pass parameter ?
I see the tab Param but it isn't work as I wait,... maybe I do a mistake...
I want that statTime and endTime are select by the user via a calendar for example...
now idIndicator and idEq was result of an other dataSet from a xml datasource...
But I don't how integrate dynamically... I try to enter a parameter via the param tab, and create and expression :
=First(Fields!idEq.Value, "EquipmentDataSet")
but when i execute the query, the promter display <NULL>...
So I don't know how to do and if it is possible !
I hope someone can help me !
Thank you !
View 3 Replies
View Related
Dec 3, 2007
Hi experts,
I'm not sure my design is normal or not. Please give me some advice.
I've a dataset and query by a field name 'companyid'.
select * from companyid where companyid = @icompany which @icompany is a input field.
if user select all, i'll send 0 to @icompany then I need to select all records.
question 1. How can I get all records? (i think about this query select * from companyid <> 0)
if user select for example companyid = 1, i'll send 1 to @icompany and the query work fine.
question 2. How can I change the query to adopt this 2 condition?
Thanks a lot,
Jeff
View 8 Replies
View Related
Oct 31, 2007
is there anyway to retrieve the database properties and display in an asp.net web form as a quick over view rather than logging onto the server to check, items such as size, space available, last backup data etc? Cheers
View 2 Replies
View Related
Oct 19, 2000
Hi and thanks for your help
specifying the default database means what. for instance when I add alog in user and I have to choose a default database. Does it make a difference if the Default database is Master or any other user database name. What is the significant to select Master vs any other database.
Thanks,
Ahmed
View 1 Replies
View Related
Oct 11, 2002
Hello!
We are having problems with a single SQL Server where the Server properties will not save, and always revert to the default.
It occurs only on those tabs with "configured" and "running" options at the bottom. Other tabs will keep the settings we custom.
The big problem is with the memory and processor tabs which even when we've made only a single change and stopped and started the service, reverts back to a default.
Any clues - we are logged in as "sa" and have not removed the SA priviledges.
Thanks for any help,
Simon
View 1 Replies
View Related
Apr 4, 2003
Once upon a time, I went to check the properties of an instance and EM just hung - anyone know why this might happen?
View 1 Replies
View Related
Aug 15, 2002
Hi all,
Plz help me to know whats wrong with following script:
EXEC sp_addextendedproperty
@name = 'col_Programs_ID_Description',
@Value = 'The Unique Identifier for a specific Program',
@level1Type = 'Programs',
@level2Type = 'ID'
I get the following error:
Server: Msg 15600, Level 15, State 1, Procedure sp_addextendedproperty, Line 42
An invalid parameter or option was specified for procedure 'sp_addextendedproperty'.
NOTE: If I dont use the last 2 parameters this procedure runs fine, but it adds the Extended Property to the Database Level while I'm trying to add it to the TABLE-->COLUMN level.
Thanks
Mariah
View 2 Replies
View Related
Dec 30, 2004
Hi all,
I'm having a problem need your help:
I can see all properties of datafile (FilegroupName, FileID, FileType,
Location, CurrentSize, Space Used) by Enterpise Manager.
Please tell me how do I see all those properties by SQL Query Analyzer.
I want to know actual space used in data file to shrink file.
Thanks in advanced,
TN
View 5 Replies
View Related
Jan 11, 2005
Running SQL2000 SP3.
We installed an application named Streamserve. Now, if I go into Enterprise Manager I can expand the databases fine. But when I try to right-click properties Enterprise Manager goes bye bye. No error messages. I tried this on master and same thing. I currently have 2 different machines - a dev and a QA box and both are behaving badly.
Any ideas?
Thanks
Sharon
View 4 Replies
View Related
Apr 25, 2008
Hi,
when ever I try to look at the properties of a job, the create new job window appears. what gives?
View 7 Replies
View Related
Sep 28, 2007
When I create a new database it asks for information regarding the Data files.
What is it for? Will this file get creted to the location that I write?
How often will it get copied there?
View 1 Replies
View Related
Dec 7, 2006
Help;Im New with a company and the sql server ismaxing out the cpu'sWe have 3 web servers load balanced....large volume of datathe current PropertiesComputer:4 amd 2.88 processors4 g MememoryRecomendations of good sql setupmemory, cpu etcThank youmike
View 6 Replies
View Related
May 23, 2007
Has anyone tried to open a cube into Business Intelligence Studio and the properties for the database vanished (project menu, properties)?
How do you get them back?
View 3 Replies
View Related
Jun 26, 2007
Hello
Im having abit off trouble with my images positioning..
I have 3 images in the header placed side by side with a rectangle around them sent to the back
In layout view the images look correct, however when i deploy the report the rectangle appears on top and then the images appear undernealth each other...when they should be inside the rectangle. is there something like float on top properties similar to objects in Word?
A separate question, I also have a table to the right off the table i have an image and under that image another image...when i preview the report the second image is pushed to the bottom of where the table ends...is there someway to make the image appear side by side to the table instead off getting pushed down to the bottom...something similar to a frame in HTML ?
thanks
View 3 Replies
View Related