I am seeking an expert help for the following issue, please find the code am using first ...the problem mentioned below that...
----------------------------------------------
DECLARE
,@DBName VARCHAR(128)
,@LoginName VARCHAR(128)
,@SQL VARCHAR(2000)
EXEC(@SQL)
IF @@ERROR <> 0
PRINT @@ERROR
ELSE
BEGIN
PRINT 'Revoked database access of [' + @LoginName + '] from the database ['+ @DBName +']
PRINT @@ERROR
END
--------------------------------------------------------------
Suppose I am trying to REVOKE a database access which not exist iw will give me a mesage like ,
Server: Msg 15008, Level 16, State 1, Procedure sp_revokedbaccess, Line 36
User 'Loginname' does not exist in the current database.
But the @@ERROR will return 0 as it was a successfull execution of EXEC(@SQL) .
So How can I retrieve the error value 15008 in a variable ..?
I cannot execute a package by using Execute Package task. I supplied sa credentials to connection manager, and it shows the list of Packages on SQL Server but when running the task it says
Error 0xC0202009 while preparing to load the package. An OLE DB error has occurred. Error code: 0x%1!8.8X!.
Hi, I'm having an SSIS package which gives the following error when executed :
Error: 0xC002F210 at Create Linked Server, Execute SQL Task: Executing the query "exec (?)" failed with the following error: "Syntax error or access violation". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.Task failed: Create Linked Server
The package has a single Execute SQL task with the properties listed below :
General Properties Result Set : None
ConnectionType : OLEDB Connection : Connected to a Local Database (DB1) SQLSourceType : Direct Input SQL Statement : exec(?) IsQueryStorePro : False BypassPrepare : False
Parameter Mapping Properties
variableName Direction DataType ParameterName
User::AddLinkSql Input Varchar 0
'AddLinkSql' is a global variable of package scope of type string with the value Exec sp_AddLinkedServer 'Srv1','','SQLOLEDB.1',@DataSrc='localhost',@catalog ='DB1'
When I try to execute the Query task, it fails with the above error. Also, the above the sql statement cannot be parsed and gives error "The query failed to parse. Syntax or access violation"
I would like to add that the above package was migrated from DTS, where it runs without any error, eventhough it gives the same parse error message.
I would appreciate if anybody can help me out of this issue by suggeting where the problem is.
I am building a Bulk Insert statement dynamically passing in filename location, etc.
I have coded error handling via the @@ERROR. To test the error handling, I am forcing the file that is bulk inserted to be missing.
The statement is created in a declared variable, IE @SQL:
EXEC(@SQL)
IF @@ERROR <> 0
BEGIN GOTO ErrorHandler END
Since the file is missing it causes an error, and the Stored Procedure gives the
Server: Msg 4860, Level 16, State 1, Line 1 Could not find the file etc. and aborts aborts the whole stored proc at that point. In other words the error handling IF @@ERROR doesn't trap the error and send the process to the error handler routine.
Is there anyway to get the error back from the EXEC, or maybe something has to be set to trap the error because it is fatal? Because of the way the Bulk Insert statement is created dynamically, it appears you have to EXEC the statement once it is built (EXEC(@SQL)).
Server: Msg 5172, Level 16, State 15, Line 1 The header for file 'd:ds2004_data.MDF' is not a valid database file header. The PageAudit property is incorrect
I can find nothing about PageAudit property.
What is it and how do I need to modify the command?
I have the following stored proc that is providing the following error - Server: Msg 156, Level 15, State 1, Line 79[Microsoft][ODBC SQL Server Driver][SQL Server]Incorrect syntax near the keyword 'ORDER'. The sp works fine if the DateOfBirth elements are removed. I think it is something to do with the way in which the date variable is incorporated into the string that will be executed by the EXEC command but I'm unsure as to what is wrong. CREATE PROCEDURE dbo.GetPersonsByName (@FirstName varchar(50)=NULL, @FamilyName varchar(50)=NULL, @DateOfBirth datetime=NULL) AS EXEC ('SELECT PersonId, Title, FirstName, FamilyName , AltFamilyName, Sex, DateOfBirth, Age, DateOfDeath, CauseOfDeath, Height, Weight, ABO, RhD, Comments, LocalIdNo, NHSNo, CHINo, Hospital, HospitalNo, AltHospital, AltHospitalNo, EthnicGroup, Citizenship, NHSEntitlement, HomePhoneNo, WorkPhoneNo, MobilePhoneNo, CreatedBy, DateCreated, UpdatedBy, DateLastUpdated FROM vw_GetPersons WHERE FirstName LIKE ''%' + @FirstName + '%'' AND FamilyName LIKE ''%' + @FamilyName + '%'' AND DateOfBirth = '+ @DateOfBirth +' ORDER BY FamilyName, FirstName') GO
I have a c# app. This is a piece of code out of a stored proc. it is erroring: Procedure or function getTopParentDealerFromChildDealer has too many arguments OR @dealerID is not a parameter for procedure getTopParentDealerFromChildDealer.(if I put ",@dealerID=@parentID)
I have tried all combinations "@dealerID",@dealerID=@parentID" etc.
BEGIN --get the top parent dealerID DECLARE @parentID INT SET @parentID = 0 EXEC getTopParentDealerFromChildDealer @dealerID, @parentID OUTPUT IF (@parentID>0) BEGIN
------------------------------------------------------ here is the getTopParentDealerFromChildDealer as called ------------------------------------------------------ ALTER PROCEDURE getTopParentDealerFromChildDealer @childDealerID INT AS
SET NOCOUNT ON DECLARE @dealerID INT DECLARE @parentID INT SET @dealerID = 0 SELECT @dealerID = dealerParentID from dealerRelations where dealerChildID = @childDealerID
WHILE @dealerID <> 0 BEGIN declare @temp INT set @temp = @dealerID IF (SELECT count(dealerParentID) FROM dealerRelations WHERE dealerChildID = @temp)>=1 BEGIN SELECT @dealerID = dealerParentID FROM dealerRelations where dealerChildID = @temp END ELSE BEGIN SET @dealerID=0 set @parentID = @temp END END
if (@parentID IS NULL) BEGIN set @parentID = 0 --set @parentID = @dealerID END
return @parentID
I don't usually use stored procedures but the job I have taken over previously used them. Any help would be much appreciated.
I am trying to setup a trace and save result to remote server by using EXEC xp_trace_setqueuedestination command. Same script was running fine on two server and failed on the other two (see attached error message). Search the Web and Microsoft don't find any clue. Can any one out there know anything about it.
Thank in advance.
Austinh
Server: Msg 19098, Level 10, State 1, Line 0 Internal Error QueueHandle ----------- 8
I have try to send a mail via xp_sendmail in Query Analyzer and it succeeded. So I try to have it executed in a trigger but it failed.
Here is the trigger creation script and error message
use mlcb go if exists (select name from sysobjects where name = 'test' and type = 'TR') DROP TRIGGER TEST GO
CREATE TRIGGER test on mlcb.dbo.trans_errlog for insert as declare @email_subject varchar(100), @email_content varchar(4000), @email_recipients varchar(50)
set @email_subject='SQL Mail test mail' set @email_recipients='some@world.com.tw' set @email_content='this is a test mail, don't reply this mail'
exec master.dbo.xp_sendmail @recipients=@email_recipients,@subject=@email_subj ect,@message=@email_content GO
Error Message: Server: Msg 2812, Level 16, State 62, Line 6 Could not find stored procedure 'master.xp_startmail'. The statement has been terminated.
Hi,all,When I use following sql, an error occurs:insert into #tmprepEXECUTE proc_stat @start,@endThere is a "select * from #tmp " in stored procedure proc_stat, and theerror message is :Server: Msg 8164, Level 16, State 1, Procedure proc_stat, Line 42An INSERT EXEC statement cannot be nested.What's the metter? Any help is greatly appreciated. Thanks
Our report is working fine with data loaded from a stored procedure (#1) that contains a fairly simple Select statement. We need the same report to work with a dataset loaded from a stored procedure (#2) that uses 'Exec sp_executesql @queryString'. Unfortunately, attempts to call the latter cause an error in the report. From everything that I've read, there should be no difference between datasets created using either method. Any ideas what could be getting in the way of the latter?
I have doublechecked that the dynamic query is returning a valid dataset and that all the columns are in the same format as sp #1. The designer shows the dataset and the report with the data loaded, but the live system produces an error.
some one can tell if i can make a "where" clause inside the BCP , when i say : select * FROM tbl where flag=N , usually the where flag='N' works with the ' ' , but it gives no error when save the store procedure without it ' ' saves nicely the SP,
but like this it saves well "SELECT * FROM tbl where flag=N" and when i execute it, give a sql statement error "Error = [Microsoft][SQL Native Client][SQL Server]Invalid column name N."
i dont now , any help
PS: perhaps at the end of the BCP ---> -c -T , must have some more or less
Hi, I have written a stored proc to bulk insert the data from a data file. I have a requirement that i need to insert the data into a table of which the name is not known. I mean to say that the table name will be passed as a parameter to the stored proc. And also i need to insert the date that will also be passed as the parameter to the stored proc
The follwing statement works fine if i give the table name directly in the query
Code Snippet
DECLARE @LastUpdate varchar(20)
SET @LastUpdate = 'Dec 11 2007 1:20AM'
INSERT INTO Category SELECT MSISDN, @LastUpdate FROM OPENROWSET( BULK '\remotemachinedatafile.txt', FORMATFILE = '\remotemachineFormatFile.fmt', FIRSTROW = 2) AS a
To satisfy my requirement ( i.e passing the table name dynamically , and the date) , i have formed the query string ( exact one as above ) and passing it to EXEC statement. But its failing as explained below
Code Snippet
@Category - Will be passed as a parameter to the stored proc
Print @vsBulkSQL - This prints the folliwing statement
INSERT INTO Category SELECT MSISDN, 'Dec 11 2007 1:20AM' FROM OPENROWSET ( BULK '\remotemachineDataFile.txt' , FORMATFILE ='\remotemachineFormatFile.fmt', FIRSTROW =2) AS a
Exec @vsBulkSQL - This statement gives the following error
The name 'INSERT INTO Sports SELECT MSISDN, 'Dec 11 2007 1:20AM' FROM OPENROWSET ( BULK '\remotemachineSecond.txt' , FORMATFILE ='\remotemachineFormatFile.fmt', FIRSTROW =2) AS a' is not a valid identifier.
Can any one please point out where am i doing wrong? Or do i need to do anything else to achive the same
I am running a package on a 64-bit server using the 32-bit dtexec. It contains an embedded Execute DTS 2000 package. I deployed the package to the server using the sa account. I set up a SQL Agent job that runs under an account that should have complete admin privileges. The network guys tell me that Legacy components have been installed (although I believe that shouldn't be necessary because SSIS is installed). This is SQL Server 2005, SP2.
When I execute this job, I receive this error message:
Executed as user: Domainuser. ...age Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 11:13:18 AM Error: 2007-12-17 11:13:35.65 Code: 0xC0010018 Source: Execute DTS 2000 Package Task Description: Error loading a task. The contact information for the task is "Execute DTS 2000 Package Task;Microsoft Corporation; Microsoft SQL Server v9; ? 2004 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1". This happens when loading a task fails. End Error Error: 2007-12-17 11:13:35.71 Code: 0xC0010026 Source: Execute DTS 2000 Package Task Description: The task has failed to load. The contact information for this task is "Execute DTS 2000 Package Task;Microsoft Corporation; Microsoft SQL Server v9; ? 2004 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1". End Error Error: 2007-12-17 11:13:35.71 Code: 0xC0024. The step failed.
Following is the stored procedure iam trying to create.Here i am trying to
First create a table with the table name passed as parameter Second I am executing a dynamic sql statement ("SELECT @sql= 'Select * from table") that returns some rows. Third I want to save the rows returned by the dynamic sql statement ("SELECT @sql= 'Select * from table") in the tablei created above.All the columns and datatypes are matching.
This table would be further used with cursor. Now i am getting a syntax error on the last line.Though i doubt whether the last 3 lines will execute properly.Infact how to execute a sp_executesql procedure in another dynamic sql statement.ANy suggestions will be appreciated.
Hi all, In Object Explorer of my ComputerNameSQLEXPRESS, I have a Database "shcDB" with Table "dbo.MyFriends" which has fields "PersonID" (Int), "FirstName", "LastName", "StreetAddress", "City", "State", "ZipCode", "E-MailAddress" set up. When I executed the following query: /////----shcSP-1.sql---//// USE shcDB GO EXEC sp_insertRecord 3, "Mary", "Smith", "789 New St.", "Chicago", "Illinos", "12345", "M_Smith@Yahoo.com" GO ///////////////////////////////////////////////////////////// I got the following error message: Msg 8144, Level 16, State 2, Procure sp_insertRecord, Line 0 Procedure or Function sp_insertRecord has too many arguments specified. (1) Why did I get this error? (2) Where can I get the documents for explaining the procedures like 'sp_insertRecord', 'sp_delecteRocord', 'sp_getRecord', 'sp_updateRecord', etc. and error messages? Please help and give me the answers for the above-mentioned questions.
Thanks in advance, Scott Chang
P. S. I used my PC at home to post the above message. I have not been able to post it by using my office PC in our LAN system. In my office LAN system, I have been struggling to figure out and solve the following strange thing: I log in http://forums.microsoft.com and "Sign Out" is on all the time. If I click on "Sign Out", I get "Logout: You have been successfully logged out of the the forums." page all the time. What is the cause to log me out? How can I get it resolved? Our Computer Administrator? Or Microsoft? What Department in Microsoft can help me to solve this problem? Please advise on this strange thing. Thanks.
I am building a stored procedure that changes based on the data that is available to the query. See below. The query fails on line 24, I have the line highlighted like this. Can anyone point out any problems with the sql?
------------------------------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------------------------------ This is the error...
Msg 8114, Level 16, State 5, Procedure sp_SearchCandidatesAdvanced, Line 24
Error converting data type varchar to numeric.
------------------------------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------------------------------ This is the exec point...
EXEC [dbo].[sp_SearchCandidatesAdvanced]
@LicenseType = 4,
@PositionType = 4,
@BeginAvailableDate = '10/10/2006',
@EndAvailableDate = '10/31/2007',
@EmployerLatitude = 29.346675,
@EmployerLongitude = -89.42251,
@Radius = 50
GO
------------------------------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------------------------------ This is the STORED PROCEDURE...
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER PROCEDURE [dbo].[sp_SearchCandidatesAdvanced]
When I use EXEC in a stored procedure ( after building complex option logic) it produces an returns an error of 'Access denied' on the underlying tables. All objects are dbo owned and execute permission has been given to all users. Can ant one help? Rob
When using a SP for getting a recordset is there any issues with using exec like in: rs.open "exec spWhatever"... Should I use rs.open "spWhatever" or does it really matter performance wise on the SQL server?
declare @TableName Varchar(255);--Just For Testing---DELETE!! declare @Filename varchar(255); --Store Distinct filename declare @DSNo Varchar(255);-- Use 'set' to execute Var TableName declare @SumUnits Varchar(255); --Use 'set' to calculate sum of units declare @SumValue Varchar(255); Set @TableName = 'TrDs01' -- Testing Only--DELETE!!
------------------------Set Statements using @TableName Var------------------------------------------
Set @DSNo = 'select distinct DataSupplierNo from ' + @TableName Set @SumUnits = 'select sum(Units) from ' + @TableName Set @SumValue = 'Select sum(Value) from ' + @TableName
Insert into TransactionMaster([FileName],DataSupplierNo,ImportFileRecordID,FileLoadDate, UnitsSum,ValueSum,RecordCount)
Select(@Filename),(exec(DSNo)), ................
Just the Bold and underlined bit "exec(DSNo)"..... is this doable in some way? can i use exec to retrieve the value to insert to data supplier. As far as i know i have to do it like this because im using a variable as the table name...
I need help understanding the syntax of the "exec sql" statement.
i am looking at code that build an sql string such as
sql="exec SOMETHING Session("id")"
or something like that.
then, there is
conn.execute(sql)
My question is the "SOMETHING" in the sql statement...is what? I know it is user defined (object or variable or such), but what exactly is it? i look through the rest of the code and don;'t see SOMETHING defined elsewhere.
i am not sure if i am asking the question right. i don't understand what the SOMETHING is doing, or why it is there.
i understand the this statement will delete a record, but how does it handle "SurveyDelete", how does it know what the is when it is not defined anywhere else in the code?
Hi, I have an sql query like this :DECLARE @TableName varchar(200), @ColumnName varchar(200), @EmployeeID varchar(200), @Result varchar(200);SET @TableName = 'Customer';SET @ColumnName = 'First_Name';SET @CustomerID = 28;-- This line return ErrorSET @Result = EXEC ('select' + @ColumnName + ' from ' + @TableName + ' where Recid = ' + @CustomerID + '');Print @Result; I am pretty sure the SELECT statement in EXEC will only return 0 or 1 record. But how to capture result from EXEC? Thanks
is it possible to have a sproc with a input parm of a column name and have this column name be inserted into an exec statement that runs and provides the output as a OUTPUT parm instead of a result set?
i can get the sproc to take the column name as a parm, run the exec, but cannot figure out how to assign the "dynamic sql" output to a OUTPUT variable instead of returning the result set.
I found this statement in BOL and it didn't make it to work.Is anybody out there who ha the same problem? Database is MASTER. USE master EXEC ("USE pubs") SELECT * FROM authors
