I am running SQL 2005, and I do not have SQL 2000.
My client has SQL 2000, but not SQL 2005.
I have a database in SQL 2005 that I need to provide to my client in a form that can be attached or restored to SQL 2000.
How can this be done? It has me, admittedly an SSIS novice, stumped.
TIA,
Mark Schreiner
Morning,
Here is my scenario:
I have a SQL Server 2000 server with 10 clients.
Each client has 5 Full-Text Catalogs. For ease of explanation let€™s call the FTCs C1 thru C5.
Now each client€™s FTCs are named the SAME. So each client has FTCs named C1, C2, C3, C4 and C5.
I need to move the clients to our new SQL Server 2005 Enterprise server.
I can backup up the DB using the native SQL Server 2000 backup command but that of course does not back up the FTCs.
So once I restore the client DB over to the new SS2K5 server, how do I re-enable the FTCs and rebuild them so that they are the same as what was over on the SS2K server.
Also, after the first client is complete, will I run into a duplicate FTC error when I try to recreate the subsequent clients on the server since they all have the same named FTCs?
If so, how do I overcome this event?
Thanks for any and all help!
I installed SP1 to fix a few problems, including one where the help button did not work from dialog boxes in Business Intelligence Development Studio. The installation of SP1 did not fix the help button problem so I decided to uninstall sql server development tools and reinstall them. Well, now I can't reinstall them because of a build block error that states I am trying to install an earlier version of Sql Server on top of a new one (which, of course, I am (in a way)). Is there any way to get around this?
View 2 Replies View RelatedI uninstalled a 32-bit eval Std Ed SQL Server 2005. I then attempted to install 64bit licensed Std Ed. The database engine and other components install fine, but SSIS is throwing a DLL error (first error following). How can I solve this issue? I have attempted to IGNORE the error, but when I try to run SSIS - I get a DLL error (second error following). All assistance is appreciated.
TITLE: Microsoft SQL Server 2005 Setup
------------------------------
Failed to install and configure assemblies C:Program FilesMicrosoft SQL Server
90DTSTasksMicrosoft.SqlServer.MSMQTask.dll in the COM+ catalog.
Error: -2146233087
Error message: Unknown error 0x80131501
Error description: One or more of the components being installed are already registered as 32 bit components in the target application. You must install the 64 bit versions of the components being installed in a different COM+ application, or delete the existing 32 bit versions of the components being installed from the target COM+ application prior to attempting install of the 64 bit versions. COM+ applications cannot contain bit neutral components.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.06&EvtSrc=setup.rll&EvtID=29549&EvtType=sqlca%5csqlassembly.cpp%40Do_sqlAssemblyRegSvcs%40Do_sqlAssemblyRegSvcs%40x80131501
------------------------------
TITLE: Connect to Server
------------------------------
Cannot connect to SERVERNAME.
------------------------------
ADDITIONAL INFORMATION:
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
Connect to SSIS Service on machine "SERVERNAME" failed:
Error loading type library/DLL.
------------------------------
Hi,
We have a product which uses SQL Server 2000 Enterprise Edition with Per Seat licensing option. Going forward with a new release of the product, we intend to upgrade to SQL Server 2005. Till now our product was being used in non web based scenarios so the Per Seat licensing option helped our case. In the upcoming release which would use SQL Server 2005 we need to break off from the non web based scenario as the product would use SQL Server over internet.
So isn't it correct to go for the Processor based licensing instead of the Per seat licensing ?
If so then what would be the ideal manner to upgrade the license from Per Seat (in SQL Server 2000) license type to Processor based (in SQL Server 2005) license type ?
I have heard of Software Assurance providing assistance in version upgrades. Would it help in case I need to upgrade from one license type to another ? Or is it applicable only in case of upgrade where the license type is fixed ?
Thanks in advance.
Cheers,
Arun
Ok, so this thread has been raised from here (http://www.dbforums.com/showthread.php?p=6283113#post6283113)...
Basically if I run this query
SELECT TOP 1 birth_date FROM people ORDER BY birth_date
--I get this
Server: Msg 170, Level 15, State 1, Line 1
Line 1: Incorrect syntax near '1'.
Has anyone ever come across this problem before?
I'm running SQL Server 2000
~George
Simplest, fastest way to copy 7 tables from as400 to SS2K weekly. Any idea?
I have a as400 server and 2 SS.
as400
SSbox1: db1 and db2 (two databases)
SSbox2: db2 (one database called db2)
SSbox1: db1 is getting data from as400 then sending it into db2 daily.
SSbox2: DTS is copying everything from SSbox1.db2 into SSbox2.db2 weekly.
I wanna simplify process from SSbox2. Maybe a linked server from SSbox2.db2 to SSbox1.db2?
let me know if you don't understand.
=============================
http://www.sqlserverstudy.com
Hi all,
I face a problem as follows: We have an application runnig on SS2K.We log every delete of
documents(from Archive table) in another table.Now it seems some of the rows have deleted strangely
without any delete log by our application.We assumed there is somebody who has direct access to
database and delete them manually(obviousely our app does not generate any log in this situation)But
there is no people.We check that with admins many times.
Does SQL Server itself deletes rows for any reason? How can I know what is happening?Do you think
our app flaws somewhere?
Thanks a lot for your attention.
Hi all,
I face a problem as follows: We have an application runnig on SS2K.We log every delete of documents(from Archive table) in another table.
Now it seems some of the rows have deleted strangely without any delete log by our application.We assumed there is somebody who has direct access to database and delete them manually(obviousely our app does not generate any log in this situation)But there is no people.We check that with admins many times.
Does SQL Server itself deletes rows for any reason? How can I know what is happening?Do you think our app flaws somewhere?
Thanks a lot for your attention.
Hi all,
I have seen in documents that I can install SS2K on a machine without network domain connection using a domain account.It said that domain accounts are prefered according to some reasons and it is not limited to machines on a domain so you should do it on a single PC.
I tried this during installation and entered many different things but no chance:
<OS_account>
<machine_name>/<OS_account>
...
Would you please telling me what should I enter as service starter account if I want to use domain users?
-Thanks in advance
Is it possible to create a Pull Subscription on a named instance in SQL Server 2000 Developer Edition? When I try, I get an error message 14234 saying that it can't find the value '@server'. Its hint is to look for the server in sp_helpserver. When I go to QA and connect to that named instance and run sp_helpserver, I see it there.
Sincerely,
Anyone writing data to DB2 on an AS400 with SSIS?
I cannot get the OLEDB destination configured correctly. I can set the destination up with a SELECT sql query, and preview the resultset.
I would like to know that how can I move 70 plus tables that are on sql 7.0 to sql 2012 via SSIS.I know its a two step process but what is the best route and how I can process.
View 0 Replies View Relatedguys,I have a project need to move more than 100,000 records from onedatabase table to another database table every week. Currently, usersinput date range from web UI, my store procedure will take those dateranges to INSERT records to a table in another database, then deletethe records, but it will take really long time to finish this action(up to 1 or 2 hours).My question is if there is some other way I should do to speed up theaction, I am thinking about use bcp to copy those records to datafileand then use bcp to insert it into SQL Server table. Is this the rightway to do it or should I consider other solution (then, what is thesolution.)Thanks a lot!
View 8 Replies View RelatedI have set up an FTP connection that tests successfully. I can log on to the FTP site with the same credentials and see my root folder, and within that, two more folders. In my FTP task, I want to receive files to my local machine. The problem is that the only remote path available is not at the root level, and the only thing I can see are files from one of the child folders, but not the child folder I want.
Is it possible in the remote path to change folders? The remote path just shows a "/", which I thought would be the root level, but it is somehow linked to a child folder.I've tried various combinations to get to the folder I want, /root folder/child folder, but that gives the error that the folder does not exist.
If I open the FTP Task Editor, click on File Transfer, and click the ellipses for the Remote Path, the Browse For File box opens, with a "/" in the Location section, and a list of files in the child folder that I do not want to be in. If I click the "Up Directory" button, I get the message "Already at top level directory".
how I can get the files from one particular folder on the FTP site?
hi,
I have a access database. In this database there are 10 tables and this tables are related to each other.
I want to move these tables to another database according to a field in XYZ table (vertical fragmentation).
for example there is name coloumn in the XYZ table and I want to take only joe lines and other tables related to that from database A and move it to database B
how can I do this?
thanks..
I’m working with an msde database on my local machine, but need to take that database and move it to my remote host. This is problematic because I can not just do a back up and restore.
I was wondering if there were any asp.net applications that would generate lots of sql statements to reproduce the database on my remote host.
I had built a program to back up all the tables in that way, but, forgot that the membership stuff uses stored procedures, and I don't not know how to modify my program in order to back those up too.
Any help will be much appreciated, thank you very much for reading my post
Hello,
What is the easiest way to move a database from one server to another with the all table structures, view and stored procedures?
Thanks,
Using sp_detach and sp_attach we can move different databases to different locations.
how do we do the same for system databases such as master,model,msdb and tempdb.
As off i know we got to be in master database to runthis command, if not this how do we go about this.
Thanks,
sheena
I read the one of the replies to a question.
"Subject:
From:
Date: SQL 7 Restore (reply)
Manish (manish45@yahoo.com)
11/1/01 9:03:43 AM
If you want to move all the databases to new server. Stop the SQL server service on existing server. Copy mdf and ldf files of all databases to same location iin new server. Also take the backup of master and msdb database from existing server. Then restore master and msdb on new server.
"
My question is how to move my database to a DIFFEREN LOCATION on a different server. My two servers are different file layout (not my choice though.)
Thanks a lot in advance.
Wuchun
P.S. Should I use the DTS at all to perform this task?
Hi:
I need your suggestion or experience about how to move a database from SQL 6.5 to SQL 7.0. The server where SQL 6.5 resides locates in different network than SQL 7.0. DTS does not work for the database move because of two server can not talk directly.
We need to do this task very soon in production environment. I tried to backup database to a disk (backup device in SQL 6.5) but I failed to restore it in SQL 7.0 because the backup file was not detected by restore utility in SQL 7.0.
Please tell me what I should do. Besides BCP, are there any other methods to move the database from SQL 6.5 to SQL 7.0 in diffferent networks.
Thank you very much.
Joan
Hi
I am new to sql server 7 and dont know how to 1.make a copy of a database
and 2 to move a database i know there are sys stored procedures but the syntax looks crptic and i dont know where to type them in if any one could give me any really clear examples of how to do both of the above i would be really grateful, thanks!
i've got to move 37 SQL Server databases over to new server. My manager tells me that i have to conduct some "check totals" to make sure that the databases contained exactly the same data from what it was when it got moved.
Is there some stored_procedure to do this ? to make sure that all the stored procedures, views, tables got move across ?
Hi,
I'm new to SQL Server. How do I port the modifications of my table structures, store procedures, functions on the staging server to the procduction server without affect the data?
Can I make this modification to production database while user are still accessing the database or I have to bring down the database to make these changes?
Thanks in advance,
Is there a way to move database from developement to production servers along with the logins and their associated roles as well as passwords. I did backup and restore and used sp_change_users_login to fix the logins
I mean is there a way to copy logins and roles Thanks
Can anyone tell me if it is possible to move the data directory of SQLServerfrom the application server where SQL runs to another system (the file andprint server) in the network?regards Joop
View 1 Replies View RelatedI'm needing to move a database from SQL 7 to SQL 2000. What is thebest way to accomplish this and keep all tables, data, permissions, etcin place throughout the move.Should I use BCP, Replication or something else?Thanks for any help.
View 2 Replies View RelatedI have a web project in VS.NET 2005 on my development computer that uses an ASP.NET database (ASPNETDB.MDF) to manage user roles. Now I would like to move that database to a test computer with IIS. After copying the web project and database I am able to read from it but when I try to update I get the following error:
Failed to update database "C:INETPUBWWWROOTMyWebAppAPP_DATAASPNETDB.MDF" because the database is read-only.
I think this is because the user 'Network Service' that IIS uses does not have access to the database. So how do I give 'Network Service' access to the database using SQL commands?
I'm trying to move a database created on SQL Server 2005 Express Edition to the SQL 2000 Server (that's the version the company uses). I understand that this is done by making a script that, when executed, creates an exact copy of the database structure on the target server as well as copying the stored procedures.
After that I somehow need to export the data from SQL Server 2005 Express to SQL Server 2000. How can I do that. There's no export function in Management Studio Express.
I am using VWD 2005 Express, with SQL 2005 Express. My web hosting company supports ASP 2.0 and SQL Server 2005, but have put SQL on a database server, which is separate from the application server. I successfully published a "Hello world" test application, but my database application failed after displaying the logon page, presumably when it first tried to connect to the database.
VWD has created my database within the application folder (appApp_DataASPNETDB.MDF) and created the configuration string in web.config: -
<add name="ConnectionString" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|ASPNETDB.MDF;Integrated Security=True;User Instance=True" providerName="System.Data.SqlClient" />
This all works fine on my local development server, but naturally fails when the application is copied to the web host, and the database can no longer be run from an application sub-folder. With SQL 2000 the problem would have been simple to fix. I would have created a database in the host DB server. I would then have backed up the development database, and restored it into the target database. I would then have changed the connect string, and all would have been OK.
How do I get the development database into the target database with SQL 2005 express? I can't use backup/restore, since there is no backup within VWD 2005 Express, and although there is a backup within Management Studio Express (MSE) I would need to get the database into MSE first. I tried opening the MDF file, but MSE wouldn't recognise this. I can't find any way of exporting the database - the equivalent of SQL 2000's DTS is not available within MSE!!!!!!!!! I tried installing an eval. version of the full Management Studio, but the install failed because "there is no upgrade path".
Once all that's sorted (if it can be sorted - I may have to go back to SQL 2000), where can I find out what to write in the configuration string?
Thank you, Robert Barnes
I need to move two databases from my old PC to my new one. Both machines are running Sql Server 2005 Express. I have tried a backup on old, copy the files to the new but I can't get restore to work. I type in the name of the new database to be created when the restore is complete and then select "From Device" and point to the backup file. I have tried both backup of entire database and backup of files. The error says: "Operating system error. System cannot find the path specified" Well, it found the path and backup file in the previous step when I pointed it to the backup media.
I have also tried the "Copy database wizard". However, Express does not come with "Agent" and the two machines can't see each other without Agent even though I have configured Express to allow remote access.
Any other ideas?
HiAs i have read, there have been discussions before how to move a local MDF databas to MSsql server at a webhost.But i cant figure it out, i know the answere is out there but i cant find it.I have downloaded the Host Deployment tool that generates a .sql file from my database, it looks ok.The problem is that my host dont allow me to execute this. I have also tried to run a file called RunSql.aspx that should help me execute my .sql file.But i recieve errors
Opening url http://mydomainz1.com/mydbfile.mdf.sqlAn error occured: System.Net.WebException: The remote server returned an error: (404) Not Found. at System.Net.HttpWebRequest.GetResponse() at ASP.runsql_aspx.__Render__control1(HtmlTextWriter __w, Control parameterContainer) in d:hsadminaccoundidmydomainz1.comRunSQL.aspx:line 58The line 58 is empty
Is there anyway that a mdf file that i have build in VWD 2005 can work as a standalone database?I would like it to be as a .mdb database that is simple to move and so on.
Or do the mdf database have to have a MSsql Express or a MSsql Server?
Grateful for help!
/ mitmit
Hi,
Can someone suggest a good way to move the CSK database from ine instandc of MSDE200 to another on a different PC. I tried exporting using MS Web database administrator which moved the tables but stripped off the defaults and all stored proceedures.
Any better ideas?
Hal