How can I use reporting services to get reports out of analysis Services Database ?
I found following on one site, but I tried to look for Analysis services database on the server I am deploying the model , but I am not able to find it.
'To use Reporting Services with data mining, you simply create a Reporting Services project with the BI Dev Studio and specify an Analysis Services database as your data source. Depending on the contents of the database, you will be presented with either an OLAP or Data Mining query builder as in Figure 3.23. You can always switch between the two modes by clicking the Switch '
Hi, I'm trying to learn about analysis, integration and reporting services. I have install SQL server 2005 management Studio Express. but I cant find these in the Start menu as mentioned in the tutorial Click Start > SQL Server 2005 > Business Intelligence Development Studio.(for reporting services). what do I need to do? Please help me.
I am wondering if it is possible to use SSIS to sample data set to training set and test set directly to my data mining models without saving them somewhere as occupying too much space? Really need guidance for that.
I am wondering where can I store my mining results in data mining engine? For example, I got mining results like accuracy chart, decision trees, and other formats of results based on different mining algorithms I used for my data mining, so where can I actually store the results for reporting service use later? Is it possible to do that in SQL Server 2005?
Thanks a lot for any help and guidance in advance.
I would like to know if there is any way to migrate third-party data mining packages with SQL Server 2005 data mining algorithms together then we can have a comparison among all of them to get the best results for training models.
Hoping someone will have a solution for this error
Errors in the metadata manager. The data type of the '~CaseDetail ~MG-Fact Voic~6' measure must be the same as its source data type. This is because the aggregate function is not set to count or distinct count.
Is the problem due to the data type of the column used in the mining structure is Long, and the underlying field in the cube has a type of BigInt,or am I barking up the wrong tree?
I'm a beginner with SQL 2012 SSDT & SSMS. I get this error message when I try to deploy my project:Â
"Error 6 Error (Data mining): KEY SEQUENCE columns are not supported at the case level. The 'Customer Key' column of the 'TK448 Ch09 Cube Clustering' mining structure contains content that is not valid. 0 0 " I am finding it hard to locate the content that is not valid. I've been trying to find a answer for this problem but can't seem to find anything. How can I locate the content that is not valid and change or delete it so that I can deploy this solution?
- a data mining structure with about 80 columns. - a data mining model using Microsoft_Decision_Trees with 2 prediction columns.Â
I thought I would then explore the possibility of have more than 2 prediction columns, in this case 20.
I get an error message and I can't work out : a) if this is because there's a limit to the maximum number of prediction columns and where that maximum is stated. b) if something else has become corrupted c) there's a know bug and if the error message is either meaningful or not.
Either way, I'm unable to complete the data mining wizardÂ
The error message is :Errors in the metadata manager. Either the mining structure with the ID of '[my model Structure]' does not exist in the database with the ID of 'DMAddinsDB', or the user does not have permissions to access the object.
I downloaded a trial version of office 2007 and the data mining addin. I do not have an automatic connection to Analysis Services, so most functionality does not work. Is it possible to configure a connection with a trial version? If so, does anyone know what the server name is and how to configure it?
A rather dumb question but I've installed an evaluation copy of SQL 2005 on my machine and a colleague would like the Analysis Services Data Mining capability on his machine (without the eval SQL Server).
Is there a license associated with such an installation when we buy 2005 or does it fall under client components which can be installed on any number of users machines?
I am using Microsoft_Time_Series and have set HISTORIC_MODEL_GAP to various values (from 1 to 21). I always get this error: Error (Data mining): The 'HISTORIC_MODEL_GAP' data mining parameter is not valid for the 'My Time Series' model.
In Algorithm Parameters window, this parameters is not there by default, so I have to add it.
Implementing data mining Add-in in an academic setting? We need to handle over 150 new students a semester and have their connection to Analysis Services survive for their four years at the college. We are introducing data mining to every freshman business student as a unit within their Intro to Excel class (close to a month of work to give them a sense of what is possible). Other courses later in their curriculum will expand on that introduction.Â
Once implemented, we would have as many as 900 connections to manage (four years from now). It is possible that multiple sections will be running at the same time, so 40 students may be accessing the data mining tools concurrently. Â
Is there a way to "bulk establish" the access credentials and establish those databases?
Would please any expert here give me any guidance about what Data Mining tasks can be automated and scheduled via Integration Services Packages? Also, If we automated the tasks, can we also automatically save the results of the tasks somewhere? Like if we automate assessing the accuracy of a mining model, then we wanna know the mining model accuracy later, therefore, we need to save all these results from the automated actions. Is it possible to realize this?
Thanks a lot in advance for any guidance and help for this.
With SASS Database i have created Data mining Structure Using Time series algorithm, while processing the SSAS db, Data mining  taking long time to process, so how we can  reduce processing time ???
Hi, I have just run a simple data set through a model to predict a simple true or false value (i.e. binary output) The Lift Chart/Mining Legend in Analysis Services shows three results €“ Score, Population Correct (%), and Predict Probability (%)
Population Correct I beleive is the percentage of predictions it got right out of the total number of predictions it tried to make. Is this correct?
However, I can€™t work out how the other two are derived in particular the 'SCORE'. To give a live example the scores were as follows:
Model Score Pop Correct Pred Probability Decision Trees 0.83 76.59% 54.28% Neural Network 0.75 67.63% 50.05% Ideal Model 100.00%
Can anyone help with this and give a detailed explanation?
I am trying to model data in analysis services with the Advance Create Mining Model function in the excel addin. I am having trouble creating an association model that works like the Associate button above the Advanced button.
The format of my data is like this
OrderID Product
100 Bike
100 Helmet
100 Shoes
200 Helmet
200 basketball
200 Bat
300 Shoes
300 Socks
The associate button works perfectly since it asks me which column is the transaction id (orderid) and which column I am trying to predict (product). The advanced create mining model asks me to determine what the columns are...
OrderID=key Product=Input+Predict?
When I run the advance create mining model associate, I get a browser that gives me no rules and the support for only one item itemset (each product but no combination of products).
Does anyone know what I have to do to get it to work like the associate button?
I perform data mining on all products and a specific product category. Do I need to create 2 data source views, one for all products and the other one for the specific product category? Afterward, I run the Data Mining Wizard 2 times to create 2 mining structures. I also need to add the same mining model (e.g. Bayes, Cluster) to each of these mining structures. Is there any simple way to do it?
I work in a big project and we will begin in using reporting services as the base technique for reports and I will be responsible for this part. but I have a problem I will discuss in the following:
Currently: We use currently devexpress reports and we have 2 languages(Arabic and English). the data in tables saved in two ways (Arabic and English). when the end user change the language of the web site the report data language changed when run it.
Example:
we have table with (ID, NAME_AR, NAME_EN, JobTitle_AR, JobTitle_EN). designed report will display(ID, NAME_EN, JobTitle_EN) . but the end user change the language of the system the report will
My requirement for the parameter is multivalue parameter with a text box. for example when user enters aa15 it need to include product aa15. when the user enters aa15, aa16, zz15 than it needs to include all the three products. the last case is when the user enters AA** than i need to inclued all the products start with AA. when i use default multivalue parameter with data source analytical services than i am getting a drop down box. I dont want that. I need a text box where user can enter the value. 1. In sql we have a like key word to query . for example select * from product where product like "AA%". what is equavalent mdx query to get such results ? 2.How to impliment the multivalue parameters without using dropdown box?
I am trying to find a reference for a client that lists the fields available to be substituted into a data driven subscription from the query, along with the expected data types.  For example, the field on whether or not to include a link to the report seems to be expecting a bit data type.I have searched and can't seem to find anything.  I guess I could walk through the interface and try different data types, but if  a list exists, that would be better.Â
I have 4 Tablix and 2 of the Tablix get data from Server 1 and other 2 get the data from Server 2.I have set NoRowsMessage "=Data Not Available for the Selected Values"  for all the 4 Tablix.Now if data is not available from Server 1 then I must show "Data Not Available for the Selected Values" only once in the  outputbut now its appearing twice in the output because of the 2 tablix that had no rows.Similarly if data not available from Server 2 then it should show "Data Not Available for the Selected Values" only once in my output.If Data not avilable from all the Tablix then also i t should show only once as "Data Not Available for the Selected Values" in the report output.
I am using SQL Server report 2008/2012 (SSRS) and my report viewer contains body content with 3 Row groups. While printing the report, Â data print with blank space and move to continue data to next page.Â
Departure flight : 70 rows First Page           : 42 rows printed Second Page     : 23  rows printed  [ Supposed to be print 28 ,  if the total count of records more than 23 and less than 42 then the page print only 23 records ] Third Page          : 5 rows printed
Departure flight : 42  rows First Page           : 42  rows printed [Report max. record allowed to print 42 rows so if total record is 42 then print perfectly ]
Departure flight : 26 rows First Page           : 23 rows printed [Supposed to be print 26, if the total count of records more than 23 and less than 42 then the page print only 23 records ] Second Page     : 3 rows printed
I have a report where in I have a combination of matrix ,table data regions.
The problem what I am facing is that the data tables don't remain fixed in their position and they tend to move down.
E.g. table 1 and table 2Â are on the same page in design time side by side (right and left)however during the runtime the table1 is pushed down and table2 is at its position .
Now how can I keep them all fixed in their same position. Most of the tables have fixed size rows and some who have high size of rows have been put at the end . What settings we can set?
I created a report in Reporting Services which was working. Then I filled in the "No Rows" section in the properties of a tablix in the report. Now it shows the No Rows message even if there is data. If I open the Shared Dataset that is used in the report and open Query Designer and run the query I get data.
I am trying to migrate my reports from SQL server 2000 reporting services 32bit to 2005 64bit. I am following the migration steps that MS specified. Restored my Reportserver and ReportserverTempDB databases Then I was using the configure Report services to upgrade these databases but I always end up getting the follwoing exception when I run the upgrade on the "Database Setup" configuration for 'ReportServerTempDB' database System.Data.SqlClient.SqlException: Could not locate entry in sysdatabases for database 'ReportServerTempDBTempDB'. No entry found with that name. Make sure that the name is entered correctly. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.ReportingServices.Common.DBUtils.ApplyScript(String connectionString, String script) at ReportServicesConfigUI.SqlClientTools.SqlTools.ApplyScript(String connectionString, String script)
It's driving me crazy, why is it looking for 'ReportServerTempDBTempDB' in the catalog instead of 'ReportServerTempDB'? Is it possible to migrate from 32bit to 64bit?
Has anyone here been able to incorporate a way of data entry using reporting services. What I would like to see is a single page that not only provides the report but also allows for the entry of data. It would be much cleaner to have both together.