Hello
I have four tables as xml. I'm successfully bulk loading them into 4 tables, using the SQL Server Destination, with check constraints unchecked.
The process manages to load all the data without any FK issue.
After that, how can I check the constraints ? (I've read a bit about is_not_trusted and sys.check_constraints)
Thibaut
I am trying to save my package (using MS Visual Studio) with ProtectionLevel = ServerStorage but it is failing with the following error "failed to apply package protection with error 0xC0014061, the protection level, serverstorage, cannot be used when saving to this destination. The system could not verify that the destination supports secure storage capability...". I am trying to test a scenario on which the package is saved in SQL Server/msdb and schedule the package via SQL Job Agent. Can someone show me how to save a package using serverstorage and schedule it via SQL Job Agent?
View 4 Replies View Related
I was trying to get my data from olb table to excel. but i got this error
my dataflow is as follows:
oledb source-> excel destination
i have got a excel file template at the destination all ready.
with the column names+ the sheet all ready.
but somehow it got stuck...
anybody can help?
thanks!
I used bulk insert to insert a txt file into a table. It works fine. (see code below) Now, one txt file with column's name at first row and has about 200 columns. There is no table created before. How to code to create a destination table based on first row of the txt file so that bulk insert will work for that txt file?
BULK INSERT #MBRACCT
FROM 'c:order.TXT'
WITH
(
FIELDTERMINATOR = '|',
FIRSTROW = 2,
ROWTERMINATOR = ''
)
I am trying to use the Bulk Insert Task to load from a csv file. My final column is a bit that is nullable. My file is an ID column that is int, a date column that is mm/dd/yyy, then 20 columns that are real, and a final column that is bit. I've tried various combinations of codepage and datafiletype on my task component. When I have RAW with Char, I get the error included below. If I change to RAW/Native or codepage 1252, I don't have an issue with the bit; however, errors start generating on the ID and date columns.
I have tried various data type settings on my flat file connection, too. I have tried DT_BOOL and the integer datatypes. Nothing seems to work.
I hope someone can help me work through this.
Thanks in advance,
SK
SSIS package "Package3.dtsx" starting.
Error: 0xC002F304 at Bulk Insert Task, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Error: 0xC002F304 at Bulk Insert Task 1, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Task failed: Bulk Insert Task 1
Task failed: Bulk Insert Task
Warning: 0x80019002 at Package3: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package3.dtsx" finished: Failure.
I know this is probably a flick of a switch but I cannot figure out which switch. Setup is SQL Server / Stored Procedures / DAL / BLL(skipped for testing) / PL. The stored procedure queries from only one table and two columns are ignored because they are being phased out. I can run the stored procedure and preview the data in the DAL but when I create a page with an ODS linked to the DAL and a GridView I get this error. I checked every column that does not allow nulls and they all have values. I checked unique columns (ID is the only unique and is Identity=Yes in the table definition). I checked foreign-key columns for values that are not in the foreign table and there are none. Any ideas why do I get this?
Failed to enable constraints. One or more rows contain values violating non-null, unique, or foreign-key constraints.
Hi,
I am getting the above error when trying to load a report into my Web Application, I have tracked the error down to one specific field in my database. Even though this field is a NVarChar field and is of size 30 it would seem that there is an issue returning the value from the field. I can write it into the database no problems but when I try to get it out of the database it returns the above error.
e.g
MOB 401.908.804 - Fails
0401.907.324 - okay
8239 9082 (pager) - fails
Anyone got an idea on how to fix this????
Regards..
Peter.
Hi, guys,
I've to build a program that verify if SQL Server is installed. How can I verify that?
Thanks in advance.
Vagner
Hello everyone,
I have an ASP application mainly connected to one SQL database that works great but now I am trying to add some functionality that requires to connect to another remote SQL server. Till now all is fine except that the remote SQL server is not always online and of course when this happens my ASP application stops with the following error:
Error Type:
Microsoft OLE DB Provider for SQL Server (0x80004005)
[DBNETLIB][ConnectionOpen (Connect()).]Specified SQL server not found.
in my Global.asa I setup my session variables for DSN connections and in my pages I call my SQL connection as follow:
Set Conn = Server.CreateObject("ADODB.Connection")
Conn.Open Session("MySQL")
SQL = "my SQL statement here;"
Set RS = Conn.Execute(SQL)
Every time the page hits the Conn.Open line I get the error if the remote SQL is not online!!!
Is there a way I can check a sort of returned error code holding the connection status before getting to the Conn.Open line???
Any help would be greatly appreciated.
Thx in advance
How do you verify SQL Server setup?
For example: SQL Server is installed on a machine and you want to verify its setup to make sure everything is intact, what are the key things you go and look out for?
Is there a command to do this?
or a procedure to follow.
Hi,
How can I verify whether the particular SQL Server 2005 installtion is 32-bit SQL Server 2005 or 64-bit SQL server 2005?
Thanks,
Ritesh
I posted this to the ms sql clustering news group, but I thought I'dpost it here just in case someone here knew the answser. This problemhas had me baffled for 5 months, and I'm not seeing any supportarticles from Microsoft on it, yet. Anyone here got a clue?About 5 months ago, I posted a query to this group after experiencingfailures with my database maintenance plans (during the verify phase)that run on SQL Clusters on Windows 2003(http://groups-beta.google.com/group...9b?dmode=source)I was re-posting this in hopes that someone knows of a fix besidescoding a home-brew verify step in to the backup job to check the file'sintegrity?Thanks,TW
View 1 Replies View Related
Hi,
I inherited some SQL 2005 server boxes with NO CDs to be found...Is there any easy way to verfiy if these SQL boxes were trial edtions or full licensed production version...?
thx in advance
magellan
Trying to upgrade a 6.5 to a 2K.
Running SQL Agent from an admin account, admin account active as admin on both 6.5 machine and 2K machine, but I can not get the upgrade past the second screen, where I get the error message:
Unable to connect to export server, please verify that you are an NT Administrator on that machine.
Stefanie
What is the syntax to verify that the partition data is loaded into the correct partition.
View 0 Replies View RelatedWhat is the syntax to verify Partition data load.
View 1 Replies View RelatedHi!
View 10 Replies View RelatedI upgraded a MS SQL 2005 Enterprise Evaluation/Trial to MS SQL 2005 Standard Edition with 5 User CAL.
I used the following command to upgrade:
start /wait setup.exe ADDLOCAL=SQL_Engine INSTANCENAME=MSSQLSERVER UPGRADE=SQL_Engine SKUUPGRADE=1 PIDKEY=<mykey> /qb
Once complete, "select SERVERPROPERTY('LicenseType')" returns DISABLED, but I expected that it would return PER_SEAT.
Thankfully, after the upgrade it does show EDITION=Standard Edition.
Questions:
1. How do I verify the license installed is the Client Access License of 5?
-- SQL Server 2005 does not seem to have the same SQL Licence control panel as did SQL 2000. It is not listed under Control Panel -> Licensing (only thing listed is 'Windows Server') nor under Administrator Tools -> Licensing.
2. How do you add CALs or change license type in SQL 2005?
-- I was also puzzled that I was not asked during setup of the license mode and/or number of licenses ( I did not get this on a fresh install of SQL 2005 SE either ).
Thanks for any assistance you can provide.
Ajay
Hi -
I got through the installation hoops for SQLEXPRESS Reporting Services in Vista and set up the default configurations in Report Services Configuration. I can explore the default directory for "Reports" in IIS7, but I can't browse in IE. I get the "The report server is not responding. verify that the report server..." message in the browser. This is after I migrated the app per the initial http 500 error using the preferred method - %systemroot%system32inetservAPPCMD.exe migrate config "Default Web Site/Reports".
I'm running Vista Ultimate, VS2005, SQLEXPRESS SP2. I've tried running IE as admin and also I've disabled UAC from gpedit.msc - ...Windows SettingsSecurity SettingsLocal PolicySecurity Options and unchecking UAC.
Thanks,
Mike
do you mean first install SDK, then install IIS, then install report sever?
I have same problem.
any can help?
Hey All:
I was totally confused.
When designing the SSIS dataflow part, firstly , i tried SQL Server Destination because my target server is a sql server.
then execute the task with failure.
Then i tried to use OLE DB DESTINATION instead of SQL Server Destination.
This Dataflow worked.
i can not figour out why.
By the way , i used the connection is OLE DB.And i choosed OLE DB source as the datasource cuz i can not find SQL server datasource.
Who can tell me some reasons for this?
When I trying to configure Reposrting services in IIS & XP. It hsows me error
"The report server is not responding. Verify that the report server is running and can be accessed from this computer."
I also configure with reposrting configuration tools which show all confuguration is perfect.
but when I try to open through IE http://localhost/Reports/Pages/Folder.aspx
or http://localhost/Reportserver
It shows error. I try all ways still not works ..Help me out
Thanks.
i have a question about constraints in SQL server.
i have three tables:
Client
---------
clientID
name
etc...
Bank
-------
BankID (a virtual number, identity)
ClientID (FK: Client)
BankAccountNumber
BankName
Order
--------
OrderID
ClientID
BankID
a Client an have one or more bankAccounts.. if he place an order, he can select wich bankaccount will be used to pay.
how do i have to set the constraints so that the bankAccount in Order, is allways of THAT client in order.???
Thanx...
HI I'm newbie in sql server and I am looking how to define a constraint between two tables that are located each in a different schema. I have tried from the Enterprise Manager but without look, could you please help me with this,
thank you
hi,
how to view all system constraints in sql server..
Hi,
I am DB programmer, How can i get Table Constraints to XML in SQL-Server 2000 with out data.
Is there any way to defer constriants in sql server 2005? I have found some sites that say use the keyword deferred but that always give me an "Incorrect syntax near 'deferred' "error.
View 1 Replies View RelatedIm having some issues with bulk insert.
This is the table:
CREATE TABLE [dbo].[tmp_GA_status](
[GA_recno] [int] NOT NULL,
[GA_desc] [varchar](40) NULL
)
This is the file (unicode):
1|"test1"
2|"test2"
3|"test3"
4|"test4"
5|"test5"
6|"test6"
7|"test7"
8|"test8"
and this is the sql:
bulk insert tmp_GA_status from 'C: empTextDumpGA_status.dta'
with (CODEPAGE='RAW', FIELDTERMINATOR='|', ROWTERMINATOR='
', DATAFILETYPE='widechar')
so yeah, pretty simple. But whatever I do I get this;
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 2 (GA_desc).
So what am I doing wrong ?
When updating data using .NET 2.0 SqlDataAdapter and a strong typed dataset, it seems that constraints (foreign key) and trigger are disabled. I'm using a stored procedure to delete rows and calling it from SSMS causes the trigger to fire. Calling it via the SqlDataAdapter not.
Can someone confirm this?
At least here, my triggers don't fire.
How can I enable, that triggers in SQL Server do fire?
Are there differences in this behaviour when using batch updates or not?
TIA,
Hannoman
I have created a simple package to load an Excel Spreadsheet into a SQL Server table. There is a one to one relationship between the columns in the .xls file and the columns in the DB record. I am getting integrity constraint errors when I try to load all numeric data from the spreadsheet (defined as Category General in excel, not defined as numeric but consisting of all numeric characters) into a column defined as (nvarchar(20), not null) in SQL Server Management Studio. There are no constraints on the column.
I have been able to temporarily bypass the offending rows, but I do need to load them into SQL Server. The problem column has a mixture of data, two examples would be: N255, 168050. It's the 168050 value that's causing the Task to bomb. How can I get this loaded into my table ?
I am running the package from within MS Visual Studio 2005 Version 8, Excel is version 2003 (11.8120.8122) SP2
Thanks,
Chris
I have to update a field within a table of 60 records or so. Each record has a different field value. it's type varchar. i was given an excel file with the field values and was thinking of a bulk update like bulk insert, but i don't recall that it's possible that way.
Is the only way to create a table, bulk insert, then merge the two tables together with UPDATE?
Just wanted to see if there was an easier way to do it, otherwise i'll take the latter route. Thanks!
Hi, folks:
View 18 Replies View RelatedHi all,
Suppose I have set a CHECK constraint to a column where Salary field is not permitted to be less than 1000 or greater than 10000.
In this situation, when I insert a new record with salary as 10, using a stored procedure from Visual Studio, how will I trap the error from C# Code?
Thanks
Tomy