How To Verify Whether All The Tables Have Inserted
Jan 23, 2015
I am working on sql integrating with Hybris. Most of you are not aware of hybris as it was a new technology.
In hybris we will create some classes and in those classes we will insert some tables. These tables will be automatically inserted into the sql server. No need to manually insert them the hybris structure will insert it. So my doubt is, how can we find out whether all the records have been inserted into sql database or not how we can check that.
Is there any way?? We have those classes in wich we can see which tables are there. Or else from the data model itself we can see what are the tables avilable or shud be inserted into sql thru hybris.
Can we check by giving all the table names in a single query?? or is there any other way to find out. If we can check by giving all the table names in single query how we need to give it.
View 1 Replies
ADVERTISEMENT
Jul 23, 2005
Hi all!In a insert-trigger I have two joins on the table named inserted.Obviously this construction gives a name collition beetween the twojoins (since both joins starts from the same table)Ofcourse I thougt the usingbla JOIN bla ON bla bla bla AS a_different_name would work, but itdoes not. Is there a nice solution to this problem?Any help appriciated
View 1 Replies
View Related
Aug 4, 2015
I am looking for a Sql query to verify the inserted values from one table(in CSV file) with another table(in sql database)
For example: I have below Values column that is present in once CSV file, after my data migration the values get stored in Results table under Message column.
I need to very whether values(1X,1Y) are inserted in Message record "successfully inserted value 1X"
Values (CSV)
1X
1Y
Results Table(SQL)
CreatedDate                  Message
2015-08-04 08:45:29.203Â Â successfully inserted value 1X
2015-08-04 08:44:29.103Â Â TEst pass
2015-08-04 08:43:29.103Â Â successfully inserted value 1X
2015-08-04 08:42:29.203Â Â test point
2015-08-04 08:35:29.203Â Â successfully inserted value 1Y
2015-08-04 08:30:29.203Â Â Test Pass
2015-08-04 08:28:29.203Â Â successfully inserted value 1Y
If all values are inserted:
Output:
All values from values table are inserted successfully
Total count of values inserted: 2
If only few values are inserted, example only 1X from Values table is inserted in Message
Example:
Results Table CreatedDate    Message
2015-08-04 08:45:29.203Â Â successfully inserted value 1X
2015-08-04 08:44:29.103Â Â TEst pass
2015-08-04 08:43:29.103Â Â successfully inserted value 1X
2015-08-04 08:42:29.203Â Â test point
Output:
All values from values are not inserted successfully in result table.
Total count of values inserted: 1
Missing Values not inserted in results table are: 1Y
View 3 Replies
View Related
Nov 29, 2007
UPDATE STATISTICS '
SP_RECOMPILE
i want to verify these 2 statements on the tables in a particular database..
how can i do this..
View 1 Replies
View Related
Mar 29, 2001
SQL 7 SP2
Are the tables inserted and deleted available from within a sp which is called from a trigger ?
Craig
View 1 Replies
View Related
Mar 22, 2000
I am reading the WROX "Professional SQL Server 7 Programming" book.
The following code appears on page 424:
CREATE TRIGGER ProductIsRationed
ON Products
FOR UPDATE
AS
IF EXISTS
(
SELECT 'True'
FROM Inserted i
JOIN Deleted d
ON i.ProductID = d.ProductID
WHERE (d.UnitsInStock - i.UnitsInStock) > d.UnitsInStock / 2
AND d.UnitsInStock - i.UnitsInStock > 0
)
BEGIN
RAISERROR('Cannot reduce stock by more than 50%% at once.',16,1)
ROLLBACK TRAN
END
The trigger fires when an UPDATE is made to Products table. The author states that the Inserted and Deleted tables only exist for the life of the trigger, not before, and not after the trigger runs. If this is true, then why would there be any rows in the Deleted table in this case? No rows were
deleted within the trigger. As far as I can see, no rows have been updated
either. If the condition does exist, no rows will be updated, and an error will be displayed. Otherwise, the row will be updated. Then there would be a row in the inserted table. But then the trigger is finished and the inserted table for that trigger disappears. I think my logic is flawed, which is why I am writing. I don't think I fully understand the Inserted and Deleted tables.
Any help would be greatly appreciated.
Nathan
View 7 Replies
View Related
Feb 25, 2004
I want to know how inserted and deleted temp tables in SQL server work. My question is more regarding how they work when multiple users accessing the same database. Suppose two users update the database at the same time. In that case what are the values stored in the inserted and deleted tables.
I have a trigger that records changes to the database as in an audit trail. Like any other audit trail I insert data into my audit table from the inserted and deleted temp tables in MS SQL Server. I however am not clear as to how these inserted and deleted tables store values when two users update the database at the same time. Are there separate inserted and deleted tables for each session. The users access the database thru ASP pages.
The audit trail I am trying to use is http://www.nigelrivett.net/AuditTrailTrigger.html
I actually would like to store the inserted and deleted temp tables into other temporary tables so that I can access these tables thru a stored procedure. This is when the problem of same users updating the temporary tables is more pronounced.
Thanks in advance.
View 1 Replies
View Related
Jul 30, 2007
Hi all,
I just ran across an issue on a SQL 2000 sp4 db where RI was being maintained solely with triggers. I am attempting to change the primary key of a parent table and cascade the results to all its children without using the vendor-supplied trigger code (long story...) using an INSTEAD OF trigger.
My question is: does SQL Server create any kind of relationship between the inserted and deleted tables that I could exploit since the key field is unavailable?
I am trying to avoid having to add a surrogate key to each of the children just for this activity (as there are many M rows in each and no other suitable unique column combinations that span all the child tables).
-DC
View 5 Replies
View Related
Dec 18, 2007
I'm know the above tables are system generated, am I right in assuming the following.
1) The tables are unique to the current user.
2) The tables only last as long as the transaction that caused their creation
Thanks in advance
Alex
View 1 Replies
View Related
Apr 30, 2001
Hello,
I have a stored procedure that's running a little slower than I would like. I've executed the stored proc in QA and looked at the execution plan and it looks like the problem is in a trigger on one of the updated tables. The update on this table is affecting one row (I've specified the entire unique primary key, so I know this to be the case). Within my trigger there is some code to save an audit trail of the data. One of these statements does an update of the history table based on the inserted and deleted tables. For some reason this is taking 11.89% of the batch cost (MUCH more than any other statement) and within this statement 50% of the cost is for a table scan on inserted and 50% is for a table scan on deleted. These pseudo-tables should only contain one record each though.
Any ideas why this would be causing such a problem? I've included a simplified version of the update below. The "or" statements actually continue for all columns in the table. The same trigger template is used for all tables in the database and none of the others seem to exhibit this behavior as far as I can tell.
Thanks for any help!
-Tom.
UPDATE H_MyTable
SET HIST_END_DT = @tran_date
FROM H_MyTable his
INNER JOIN deleted del ON (his.PrimaryKey1 = del.PrimaryKey1) and
(his.PrimaryKey2 = del.PrimaryKey2)
INNER JOIN inserted ins ON (his.PrimaryKey1 = ins.PrimaryKey1) and
(his.PrimaryKey2 = ins.PrimaryKey2)
WHERE (his.HIST_END_DT is null)
and ((IsNull(del.PrimaryKey1, -918273645) <>
IsNull(ins.PrimaryKey1, -918273645)) or
(IsNull(del.PrimaryKey2, -918273645) <>
IsNull(ins.PrimaryKey2, -918273645)) or
(IsNull(del.Column3, -918273645) <>
IsNull(ins.Column3, -918273645)))
View 1 Replies
View Related
Sep 11, 2001
I want to compare the before and after values of an UPDATEd column using a trigger. I want to know if the value in the column has changed. Simple? No!
As you know, SqlServer puts the before image of the UPDATEd rows into the DELETED virtual table and the after image of the UPDATEd rows in the INSERTED virtual table.
So you would get the before and after data by doing a SELECT on these tables.
But here is the problem - how do you join the tables? What if there are >1 rows in these 2 tables (because the UPDATE affected >1 rows) - how do i know which "old"/DELETED rows correspond to which "new"/INSERTED?"
Ok - I could join the 2 tables on the primary key, but what if the primary key was updated? In that case the join would not work - the DELETED table would contain the old primary key value and the INSERTED table would contain the new (different) primary key value. In fact, ALL of the columns may have been changed by the UPDATE.
Now, there is another thing to try with triggers - the
IF UPDATE ( <columname> )
test. This is designed to tell you if a specified column was UPDATEd by the last UPDATE. However, this will return TRUE for any UPDATE that mentions the column - even if the UPDATE does not change any data! So I cannot determine whether a certain column has had its value changed with this either.
So then you can try another test mentioned in the docs for CREATE TRIGGER - the
IF COLUMNS_UPDATED()
test. However, this will report that a column has been updated, NOT whether the data has changed as aresult of that UPDATE.
So if you UPDATE the value in the column to the same value as it was beforehand (admittedly, a pointless thing to do, but it could happen in some apps), this fuction will say, yes, this column was updated.
So my question remains - how do I know if the data has changed in a column after an UPDATE, using a trigger?
Any ideas?
View 1 Replies
View Related
Nov 9, 2007
I dont know what I am doing wrong. The trigger (see below) is doing what I want it to do when I do this:
INSERT INTO dbo.personal
(personal_id, chef_id,fornamn, efternamn)
VALUES
(40, 100, 'Malin', 'Markusson' , 'Boss')
but when I remove one value, the result in the logtable is NULL:
INSERT INTO dbo.personal
(personal_id, chef_id,fornamn, efternamn)
VALUES
(40, 100, 'Malin', 'Markusson' )
How can I change the trigger so that it will give me the information of the values that have been updated, inserted or deleted when I dontchange all values (just a couple of them)?
My trigger:
CREATE Trigger trigex
ON dbo.personal
FOR insert, update,delete
AS
INSERT INTO logtable (Innan_värde, Ny_värde)
SELECT
rtrim(cast(d.personal_id as varchar)+', '+cast(d.chef_id as varchar)+', '+rtrim(d.efternamn)+', '+ rtrim(d.fornamn)+ ', '+ rtrim(d.titel)),
(cast(i.personal_id as varchar)+', '+cast(i.chef_id as varchar)+', '+rtrim(i.efternamn)+', '+ rtrim(i.fornamn)+ ' '+ rtrim(i.titel))
FROM inserted i full join deleted d on i.personal_id = d.personal_id
My table:
CREATE Table logtable
(Innan_värde varbinary(max),
Ny_värde varbinary(max))
Thank you !
View 1 Replies
View Related
Mar 26, 2008
can anybody tell me with an example how to use Inserted and Deleted in Sql Server 2005
View 7 Replies
View Related
Jul 27, 2015
I have a CRM database that has a lot of tables and would like to be able to extract the last 'x' records in descending order from each table based on a common a field 'modifiedon' that is in every table and is auto populated by the system.
View 4 Replies
View Related
Nov 29, 2007
We have an app that uses triggers for auditing. Is there a way to know the order that the records were inserted or deleted? Or maybe a clearer question is.... Can the trigger figure out if it was invoked for a transaction that "inserted and then deleted" a record versus "deleted and then inserted" a record? The order of these is important to our auding.
Thanks!
CB
View 1 Replies
View Related
Aug 15, 2007
I have a table that sometimes has modifications to column(s) comprising the primary key [usually "end_date"]. I need to audit changes on this table, and naturally, turned to after triggers.
The problem is that for updates, when the primary key composition changes, I'm not able to relate/join using the primary key - obviously, it no longer matches across INSERTED and DELETED. Now, for a single row update, it's easy to check for updates on PK columns and then deduce what changes were made...
So the real question is: are rows in INSERTED and DELETED always in matching order (1st row in INSERTED corresponds to the 1st row in DELETED...)?
I don't want to put a surrogate key (GUID nor IDENTITY) on the base table if at all possible. INSERT... SELECT from the inserted/deleted tables into a temp table with identity column is fine, and is what I'm currently doing; I would like MVP or product engineer level confirmation that my ordering assumption is correct.
Testing using an identity surrogate key on base table, and selecting from the Ins/del tables, and the temp tables without an order by clause seems to always return in proper order (proper for my purposes). I've tested under SQL 2005 RTM, SP1, SP2, and SP2 "3152".
FYI, I've lost the debate that such auditing is better handled by the application, not the database server...
Aside: why doesn't the ROW_NUMBER() function allow an empty OVER( ORDER BY() ) clause? Will SQL ever expose an internal row_id, at least in the pseudo tables, so we can work around this situation?
Thanks
Mike
View 12 Replies
View Related
Jun 18, 2007
I have a sql sever 2005 express table with an automatically incremented primary key field. I use a Detailsview to insert new records and on the Detailsview itemInserted event, i send out automated notification emails.
I then received two automated emails(indicating two records have been inserted) but looking at the database, the records are not there. Whats confusing me is that even the tables primary key field had been incremented by two, an indication that indeed the two records should actually be in table. Recovering these records is not abig deal because i can re-enter them but iam wondering what the possible cause is. How come the id field was even incremented and the records are not there yet iam 100% sure no one deleted them. Its only me who can delete a record.
And then how come i insert new records now and they are all there in the database but now with two id numbers for those missing records skipped. Its not crucial data but for my learning, i feel i deserve understanding why it happened because next time, it might be costly.
View 5 Replies
View Related
Oct 6, 2004
Hi folks,
Table:
a int,
b int,
c int,
d text
I need to change my AFTER - Trigger from this (example!):
select * into #ins from inserted
to something like
select *(without Text / nText / image -columns) into #ins from inserted.
So I tried to build a string like this: (using INFORMATIONSCHEMES)
select @sql = 'select a,b,c into #ins from inserted'
exec(@sql)
a,b,c are not of Text, nText or Image datatype.
After executing the trigger, I get an error, that inserted is unknown.
Does anyone know how to solve this ?
Thx.
View 5 Replies
View Related
Jun 13, 2015
I would like to wrap the following code in a function and reuse it. Â I use this code in many triggers.
DECLARE @Action as char(1);
SET @Action = (CASE WHEN EXISTS(SELECT * FROM INSERTED) AND EXISTS(SELECT * FROM DELETED)
THEN 'U' Â -- Set Action to Updated.
WHEN EXISTS(SELECT * FROM INSERTED)
THEN 'I' Â -- Set Action to Insert.
WHEN EXISTS(SELECT * FROM DELETED)
THEN 'D' Â -- Set Action to Deleted.
ELSE NULL -- Skip. It may have been a "failed delete". Â Â
END)
Is it possible to write a function and pass the INSERTED and DELETED logical tables to it?
View 5 Replies
View Related
Jun 5, 2006
is there any way of getting the identity without using the "@@idemtity" in sql??? I'm trying to use the inserted event of ObjectDataSource, with Outputparameters, can anybody help me???
View 1 Replies
View Related
Jun 15, 2007
I haven't written any .net database updates before. I wrote the following code for a visual web developer application and it appears to work. There is no close function or anything. Will the adapter, builder, dataset, and row objects be cleaned up and disposed of properly? Please tell me if I need to include anything else. The connection object is made elsewhere. ThanksDim adapter As New Data.SqlClient.SqlDataAdapter("SELECT * FROM Inventory WHERE InUnique=" & ListValue.Value, connect)
Dim builder As New Data.SqlClient.SqlCommandBuilder(adapter)Dim dataset As Data.DataSet = New Data.DataSet()
adapter.Fill(dataset, "Inventory")Dim datarow As Data.DataRow = dataset.Tables(0).Rows(0)
datarow("InAgUnique") = Val(InAgUnique.Text)datarow("InTyUnique") = Val(InTyUnique.Text)
datarow("InName") = InName.Textdatarow("InPnUniquePrimary") = Val(InPnUniquePrimary.Text)
datarow("InPnUniqueSecondary") = Val(InPnUniqueSecondary.Text)datarow("InPnUniqueTertiary") = Val(InPnUniqueTertiary.Text)
datarow("InPnUniqueSupervisor") = Val(InPnUniqueSupervisor.Text)datarow("InDescription") = InDescription.Text
datarow("InProblemInstructions") = InProblemInstructions.Text
adapter.Update(dataset, "Inventory")
View 1 Replies
View Related
Jan 1, 2008
Hi, all!
I'm really confused about how to run a query on the database to check to see the CustomerID filed value already exists in the database.
If it’s true, I want to display a message: “Valid� the user to proceed with the next steps
Else
Display the customer number doesn’t exist in the database, and cancel.
I tried all sorts of things and I just can't get it to do it. Hopefully you can help. Thank you
View 5 Replies
View Related
Jul 30, 2007
I cannot find any OLE DB reference material for how to perform a "Verify" DB as advertised in the Documentation for SQL Server Mobile Edition.
The docs have a sample in C#, but nothing for OLD DB in C++.
Does anyone know how to do this?
View 1 Replies
View Related
Aug 24, 2007
Will someone please help verify this SQL fragment?
I want to ensure that it produces the same results as the 'Group By' clause of the MS Access fragment below.
T-SQL:
Group By Case
When r.LICFAC In ('CR', 'GC') And f.SOPNO < 38 Then -1
Else 0
End
, Case
When r.LICFAC = 'MU' And f.SOSTS <> '05' Then -1
Else 0
End
MS Access:
GROUP BY IIf((([LICFAC]="CR" Or [LICFAC]="GC") And ([SOPNO]<38)),True,False)
, IIf(([LICFAC]="MU") And ([SOSTS]<>"05"),True,False)
View 5 Replies
View Related
May 13, 2004
Dear SQL,
I need to SELECT something from a database that has a UNIQUEIDENTIFIER (GUID) field,
If the number is wrong (has some other than A-Z 0-9) than the ASP page just freaks out and gets "error converting from a character string to uniqueidentifier"
How can I check that the GUID is OK before I SELECT ?
this is the number format:
{7A9B5F81-4936-4A31-B4E2-9168AAB75A0}
I tried to cast this "error" number with no successs:
"WHERE Deceased_ID = cast('"& "---------4936-4A31-B4E2-9168AAB75A0" &"' as uniqueidentifier)"
Thanks in advance, Yovav.
View 5 Replies
View Related
Nov 23, 2005
Hi,Is there a simple way to verify if a database exists?I'm writing a stored procedure that will accept a database name as an inputparameter,and create the database if it does't already exist.--Message posted via http://www.sqlmonster.com
View 2 Replies
View Related
Jan 17, 2007
How can I verify if the sp1 is installed on my sql server 2005 server ?
Cosimo
View 1 Replies
View Related
Apr 1, 2008
Hi, guys,
I've to build a program that verify if SQL Server is installed. How can I verify that?
Thanks in advance.
Vagner
View 3 Replies
View Related
Nov 18, 2006
Hello everyone,
I have an ASP application mainly connected to one SQL database that works great but now I am trying to add some functionality that requires to connect to another remote SQL server. Till now all is fine except that the remote SQL server is not always online and of course when this happens my ASP application stops with the following error:
Error Type:
Microsoft OLE DB Provider for SQL Server (0x80004005)
[DBNETLIB][ConnectionOpen (Connect()).]Specified SQL server not found.
in my Global.asa I setup my session variables for DSN connections and in my pages I call my SQL connection as follow:
Set Conn = Server.CreateObject("ADODB.Connection")
Conn.Open Session("MySQL")
SQL = "my SQL statement here;"
Set RS = Conn.Execute(SQL)
Every time the page hits the Conn.Open line I get the error if the remote SQL is not online!!!
Is there a way I can check a sort of returned error code holding the connection status before getting to the Conn.Open line???
Any help would be greatly appreciated.
Thx in advance
View 6 Replies
View Related
Mar 6, 2007
I have inherited serveral SQL 2000 servers and need to know if there is a way to verify the license that was installed, per processor or Server + Cals.
Thanks,
Skip Berry
View 4 Replies
View Related
Jun 14, 2007
How do you verify SQL Server setup?
For example: SQL Server is installed on a machine and you want to verify its setup to make sure everything is intact, what are the key things you go and look out for?
Is there a command to do this?
or a procedure to follow.
View 1 Replies
View Related
Nov 15, 2007
Hi, I am making a module to backup SQL Db from webpage. I impersonate asp.net user to a given Windows Account and need to verify that account has required permission in SQL Server.I don't know how to verify the windows account credential for SQL Server login. Now what I am doing is to run SQL query against database to select row from some table, if it is successful, the user is valid SQL login. But I know it's not the way. Any idea? Thanks,
View 1 Replies
View Related
Jul 31, 2004
Hello, everyone:
Does any baby offer command to verify if database backup is completed? In backup wazard, there is an option "Verify backup upon completion" . Is there the SQL command? Thanks.
ZYT
View 1 Replies
View Related
