Hello ,
I need to make the automatic subtotal column in most right position in a matrix wider than the data columns , i faild so far and discovered that its width is proportional to the data column width , its logic for the total column to be wider since its value is sum(all left data columns)
any way around this ?
thanks
Bassam
I have data in rows that I need to aggregate and display in a columnar fashion and I haven't been able to figure out how to do it. A simplified version of the data as it is stored in the table:
Station Month Day Reading
1 1 1 100
1 1 2 200
1 1 3 300
1 2 1 400
1 2 2 500
And I would like to create a query that returns:
Station Month Day 1 Day 2 Day 3
1 1 100 200 300
1 2 400 500
Any help you can provide or tips to steer me in the right direction are much appreciated.
Dianne Siebold
My report has two groups, company and error type for each company.
Company1
Functional Error
Data Error
Other Error
My goal is to show the subtotals for each error types when I show Company's subtotal/total; in the group 1 footer area.
Total for Functional Error:
Total for Data Error:
Total for Company1:
Please help me in figuring out how to do that.
Thank you in advance for your help.
Hello everybody,
I would like to put a subtotal at the top of the report, before the data row. Is it possible, and how to do that ?
Thank you in advance for your precious help.
Regards,
Yen
Hi,
I'm having a problem to sum up the subtotal for the diff value in a datacell, group in the same rowgroup.
for eg:-
LOCATION (columngroup)
ITEM (rowgroup) AGING (rowgroup) Alaska NewYork Indianapolis -(datacell in qty)
ABC 10 5
8 8
2 10 - subtotal = 23
DEF 5 6 - subtotal = 6
GHI 9 4 4 - subtotal = 8
grand = 37
I need to know how to add in the subtotal and the grandtotal. Im using a matrix and SSRS 2000.
Besides that, is that a way to add in the header name for the ROW group in a matrix? Im currently using a normal table, aligned to the same size as the matrix, above the matrix and display the header. Is there a better way?
Thanks for the help.
Table here shows partial data extract in order I want to see the report. I need to report:
part-a  full, 8 layer, 7 layer, 6 layer....
Part-b  full, 8 layer, 7 layer, 6 layer....
part-a  full, 8 layer, 7 layer, 6 layer....
Part_NumberÂ
 Pal_num
      MFGDate
Shifttime
WorkCen
[Code] ....
if I group by part number, I get a total. I need a 'sub-total' by part as each group is produced.
Report should be:
Part                        FULL     8layer  7layer 6layer   5layerÂ
4layer.....
604-04043Â Â Â Â Â Â Â Â Â Â Â Â Â Â 6Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 1
604-02057Â Â Â Â Â Â Â Â Â Â Â Â Â Â 14
604-04043Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 7
I have a XML column in my source DB. Is there any way possible using SSIS to convert the XML to ordinaty cols (varchar) in the destination db.
I am using Sql 2k5.
thanks in advance
my table
id; part_name ; part_desc
01; xpto ; descr
02; qwerty ; azerty
03; azerty ; descr xpto
I want to search from two columns
something similar to :
SELECT * FROM tools WHERE (part_name LIKE @parameter_search or part_desc LIKE @parameter_search);
If i search for "xpto" only the first line would show.
How can i solve/go around this?
Hi
There is a table which has repeated values in more than one col.
I want to view all the distinct values for both the cols
for eg
col1 col2 col3
A B D
A B E
B C E
B C F
I want the output as
col1 col2
A B
B C
cheers
Vic
Vicky
I'd like to know if I can make one proc/cursor that I can pass only a table name and it will determine what cols exist in the table?
AND, what is the syntax for such a query?
I will be receiving data back where I will receive the accountID and only the deltas will have values all other columns will be null.
My proc will update an existing record, updating the specific col when an accountID exists, it will create a new record if the accountID does not exist.
I'd like to search all the cols getting their names and values when not null.
I can construct a proc for each table searching each col by known name.
However, I'd like to know if I can make one proc/cursor that I can pass only a table name and it will determine the cols?
All my tables start with cols AccountID and end with RecID with any number of cols inbetween.
TIA
JeffP...
cross posted to ms.pub.mssqlserver.programming
Hi,
How can we use two identity column (with identity property) in table ?
GK
gk
I have about 30 tabs with same struture.
I want to simple put column 2 in all 30 table in a new table without joining on anything. Is there a way to do that?
Thanks
JP
Hello,
I have a table with 1 column containing numeric values, and I need to create a query which displays the count of values for each set of conditions. For example, if the table contains the values 1,2,3,4,5 and 6, the output of the query should look like this:
L M H
-----------------------
3 2 1
(L are values below 4, M between 4 and 5, H is 6 and above)
Any suggestions?
TIA
For ex.
Table Match_List ( MatchID, UserID_A, UserID_B)
constraints like
MatchID primary key
UserID_A <> UserID_B
unqiue index (UserID_A,UserID_B)
but I wish to exclude duplicated rows like 1,1,2 & 2,2,1,
cause UserA to UserB, and UserB to UserA are the same thing.
How can I get this?
Hi I have a table which has couple of name cols and 10 varchar columns. The requirement was to retain the first two cols but convert the 10 cols into a single XMl.
the table has this schema;
ManagerName varchar
UserName varchar
TextField1 Varchar
TextField2 Varchar
TextField3 Varchar
TextField4 Varchar
TextField5 Varchar
TextField6 Varchar
TextField7 Varchar
TextField8 Varchar
TextField9 Varchar
TextField10 Varchar
I wrote a query like;
SELECT
TPD.[NameId]
,CrtdUser.[UserId]
from [Olddb_DB] TPD
join
[NewDB]..[Manager]CrtdUser
on
Crtduser.managerName = TPD.ManagerName
join
[NewDB]..[Users]Users
on
Users.[loginDetail] = TPD.[UserName]
to get the cols other than the XML
/*********/
SELECT
XmlDat.[textField1],
XmlDat.[textField2],
XmlDat.[textField3],
XmlDat.[textField4],
XmlDat.[textField5],
XmlDat.[textField6],
XmlDat.[textField7],
XmlDat.[textField8],
XmlDat.[textField9],
XmlDat.[textField10],
XmlDat.[textField11],
XmlDat.[textField12]
from
[olddb_db]..[DETAIL_DEF] XmlDat,[NEWDB]..[Detail_Def]TPD
where TPD.Name = XmlDat.Name
for XML AUTO, ELEMENTS
and this query to convert all the varchar cols to a XML. Now the problem is I am not sure of how to combine both these queries to Insert into the new table.
Can someone guide me in this
the destination table looks like
Name (Varchar)
UserId (int)
UserVal_XMl (XML)
Thanks in advance
Hi,
With reference to http://www.intelligententerprise.com/001020/celko.jhtml?_requestid=235427
I want the "sql stmt" which wud give the lft and rgt col values..
i am reading his book but cant understand :eek: where he explains
wat lft and rgt cols are..
"The root is always (lft,rgt) (1, 2*(Select count(*)from table) and leaft nodes are (lft+1=rgt)" :S
CREATE TABLE [RS_A] ([ColA] [varchar] (10)[ColB] [int] NULL)CREATE TABLE [RS_B] ([ColA] [varchar] (10)[ColB] [int] NULL)INSERT INTO RS_AVALUES ('hemingway' , 1)INSERT INTO RS_AVALUES ('vidal' , 2)INSERT INTO RS_AVALUES ('dickens' , 3)INSERT INTO RS_AVALUES ('rushdie' , 4)INSERT INTO RS_BVALUES ('hemingway' , 1)INSERT INTO RS_BVALUES ('vidal' , 2)I need to find all the rows in A which do not exist in Bby matching on both ColA and ColBso the output should bedickens 3rushdie 4So if i write a query like this , I dont get the right result setSELECT A.ColA, A.ColBFROMRS_A AINNERJOIN RS_B BONA.ColA <B.ColAORB.ColB <B.ColBBut if i do the following, i do get the right result, but followingseems convoluted.SELECT A.ColA, A.ColBFROMRS_A AWHERE ColA + CAST(ColB AS VARCHAR)NOT IN (SELECT ColA+CAST(ColB AS VARCHAR) FROMRS_B B)
View 6 Replies View RelatedHow can I format the background color of a data-region field when I just want it to be "silver" If it is a subtotal value???
View 3 Replies View RelatedHow can something like this be done in reporting services? I'm having trouble to get the totals, because if I do Sum(Fields!Yes.Value) + Sum(Fields!No.Value) it will just give me the overall total (133).
Please help guys. I tried with the matrix but it always breaks or just doesn't want to give me the subtotals.
Description
Yes
No
Subtotal
Studies
50
22
72
Works
28
33
61
€¦
€¦
€¦
€¦
I want to create a subtotal for my results in my table, for example:
=Fields!Animals.Value =Fields!Result.Value
Dogs 3
Cats 4
bird 6
SubTotal 13
If i use =Sum(Fields!Result.Value) i have a error #Error, i don't know how do ir, Someone can help me?
Thank you a lot!
Hello,
I have a matrix with subtotal.
I want to hide or show the subtotal by a parameter.
The header of the subtotal is not a problem since it have the "visibility" property.
The problem is that when I'm clicking on the green rectangle to go to the subtotal area itself - It doesn't have the "visibility" property.
So I don't see the header but I see the subtotal date itself.
Any idea on how to resolve this?
Thanks.
I need to total filtered values each time the filter criteria changes.
So lets say I change the month to JAN then in addition to the subtotals for each category I need to get a Grand Total.
Thanks much.
SELECT Location, SUM(month_est) AS SubTot_Month_Est, SUM(actual) AS SubTot_Actual, mnth, yr
FROM dbo.meetings
GROUP BY Location, mnth, yr
Hi,WITH SQL SERVER QUETY, I have output likePRJ item qty=================P1 I1 10P1 I1 20P1 I2 10P2 I2 10P2 I3 10================I WANT TO MANIPULATE IT LIKE THISPRJ item qty=================P1 I1 30P1 I2 10---------------P1 * 40---------------P2 I2 10P2 I3 10---------------P2 * 20---------------===============PRJ * 60===============SHOW DATA AND SUBTOTAL AND GRAND TOTAL IN ONE RESULTSETCAN ANYBODY HELPTHANKS IN ADV.T.S.NEGI
View 2 Replies View Related
hi,
i am using SQL server reporting services 2000. in that i am using a matrix and one column group and a one row group. i want to calculate total of row and column group and i insert a subtotal at for row and column group.
butits calculation wrong total just picking first row and first column in total.
Application
ABC
DEF
123
456
Total
stat
17
15
3
6
17
Config
15
0
12
0
15
CSP - IMS
11
10
0
0
11
Portalm
10
8
8
0
10
Total
17
15
3
6
17
can anyone help me in this regards.
Regards,
Faisal Saleem
Hi
I have the following matrix
CA AZ
No surplus 11 5
Surplus 12 10
Zotal 100 50
Totlal 123 65
I want that only (No surplus and Surplus) sum include in total Can I apply This condition on Subtotal.
thanks in advance
Hi Everyone,
I am trying to get something like this using matrix in reporting services
SE
CP
CG
Total
Qty
Value
Qty
Value
Qty
Value
Qty
Value
GST
Net
7/07/2006
124
233
552
525
141
2544
563
4215
321
4536
8/07/2006
1245
211
11
142
555
1444
1987
1854
124
1978
The problem is, in the total group, the GST value and Net ( Net = Value + GST) can't added into the total group in the matrix.
Can somebody help... Thanks a lot.
Is there a way to make the subtotal column appear on every page when the matrix spans multiple pages?
View 1 Replies View RelatedI'm still new to reporting services so forgive me for the newbie question...
View 9 Replies View RelatedHello,
I want to have a subtotal column AND a subaverage column (or n total columns) like the one in the following example - but without the extra Avg column in the Data area.
How to do that?
2000
Q. 2
April
Avg
May
Avg
June
Avg
Total
Avg
North
4800
4800
5708
5708
5580
5580
16088
5363
South
3238
3238
3637
3637
3527
3527
10402
3467
West
1699
1699
1687
1687
1614
1614
5000
1667
Thank you!
i would like to return total value for each row and column.
can someone send a sample code?
like:
columnA columnB Total
4 5 9
5 1 6
3 2 5
12 8 20
I have a problem about my subtotal.I cannot change the background color based on my conditions.But what makes me think is that the font of my subtotal changes, the same as when my cell data meets my condition,without changing the subtotal's property.
What could be the reason why my subtotal wont change?I have a condition in my background
=iif(Fields!IsHold.Value = True,"Red","White")
Hello,
I have created a report - matrix from column month, day, week, partnergroup, number.
With subtotals per each criteria.
Current report:
month week day partnergroup sum
1 1 2008-01-01 loans 10
1 1 2008-01-01 mortgages 20
total day 30
....
1 1 2008-01-02 loans 40
1 1 2008-01-02 mortgages 0
total day 40
...
... total week 200
I need subtotals for week with rows for each partnergroup. It should be like this:
month week day partnergroup sum
1 1 2008-01-01 loans 10
1 1 2008-01-01 mortgages 20
total day 30
....
1 1 2008-01-02 loans 40
1 1 2008-01-02 mortgages 0
total day 40
...
... total week loans 110
mortgages 90
Could anybody help me ?
Hopefully this is a simple question. We have a report with several subreports that display certain totals by a group. What we want to do now it to show a running total on the main report. Is there a way to pass data from the subreport (the subtotal) to the main report for a Grand Total?
Thanks for any information.