How To Write Date Range On Case Statement
Oct 30, 2012
I have a case statement as follows which I am using in the where clause to get today's data
(Case when (A.ID is null or B.ID = '' or C.ID= ' ') Then convert(varchar,(Case when A.Time is null then B.Time else A.Time end),103)
else convert(varchar,(Case when A.Time is null then ''" else B.Time end),103) end)
=convert(varchar,getDATE(),103)
However I want to know whether I can use a date range on a case statement
I.e. I want to be able to use BETWEEN statement to get a date range
BETWEEN convert(varchar,getDATE(),103) AND convert(varchar,getDATE()-1,103)
How do I achieve this on a CASE WHEN statement?
View 3 Replies
ADVERTISEMENT
Jul 4, 2006
Hello friends,
I want to use select statement in a CASE inside procedure.
can I do it? of yes then how can i do it ?
following part of the procedure clears my requirement.
SELECT E.EmployeeID,
CASE E.EmployeeType
WHEN 1 THEN
select * from Tbl1
WHEN 2 THEN
select * from Tbl2
WHEN 3 THEN
select * from Tbl3
END
FROM EMPLOYEE E
can any one help me in this?
please give me a sample query.
Thanks and Regards,
Kiran Suthar
View 7 Replies
View Related
Sep 19, 2013
I have to do following scenario,
if 1st query Then 2nd Query
Else 'Msg'
How Can i do this using Case Statement??how can do this by Other way??
View 5 Replies
View Related
Jul 20, 2005
Using SQLServer ver 7.0, two tables:TableA = contains all inventory dataTableB = contains four fields: ID, source, date_from, date_toThis is where multiple range of dates are populated.Sample 1:1,'A','9/1/2004','9/30/2004'Sample 2:2,'A','1/1/2003','3/31/2003'3,'A','10/1/2004','10/31/2004'Data populated on TableB varies.Sample SQL for Sample 1:SELECT *FROM TableAWHERE inventory_date BETWEEN (select DATE_FROM from TableB) AND (selectDATE_TO from TableB)Problem: How to approach sql statement based on Sample 2 above?
View 3 Replies
View Related
Mar 31, 2008
Hello all,
I have the following SQL statement that works great for my purpose:
SELECT DATEADD(hh, DATEPART(hh, Date), DATEADD(d, DATEDIFF(d, 0, Date), 0)) AS TimePeriod, AVG(ZNT) AS Expr1, AVG(SAT) AS Expr2, AVG(RAT) AS Expr3,
AVG(RH) AS Expr4
FROM HVACValues
GROUP BY DATEADD(hh, DATEPART(hh, Date), DATEADD(d, DATEDIFF(d, 0, Date), 0))
ORDER BY TimePeriod
I'd like to do everything above but add to display only those records from 1/1/07 to 1/7/07...so a week's worth.
I'm no SQL expert but I assume that I'd add 'WHERE TimePeriod = ....' Any help is much appreciated!
Thank you very much.
View 3 Replies
View Related
Apr 6, 2015
I have 2 tables, one is table A which stores Resources Assign to work for a certain period. The structure is as below
Name StartDate EndDate
Tan 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000
Max 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000
Alan 2015-04-01 16:30:00.000 2015-04-02 00:30:00.000
The table B stores the item process time. The structure is as below
Item ProcessStartDate ProcessEndDate
V 2015-04-01 09:30:10.000 2015-04-01 09:34:45.000
Q 2015-04-01 10:39:01.000 2015-04-01 10:41:11.000
W 2015-04-01 11:44:00.000 2015-04-01 11:46:25.000
A 2015-04-01 16:40:10.000 2015-04-01 16:42:45.000
B 2015-04-01 16:43:01.000 2015-04-01 16:45:11.000
C 2015-04-01 16:47:00.000 2015-04-01 16:49:25.000
I need to select the item which process in 2015-04-01 16:40:00 and 2015-04-01 17:30:00. Beside that I need to know how many resource is assigned to process the item in that period of time. I only has the start date is 2015-04-01 16:40:00 and end date is 2015-04-01 17:30:00. How I can select the data from both tables. There is no need for JOIN, just seperate selections.
Another item process time is in 2015-04-01 10:00:00 and 2015-04-04 11:50:59.
The result expected is
Table A
Name StartDate EndDate
Alan 2015-04-01 16:30:00.000 2015-04-02 00:30:00.000
Table B
Item ProcessStartDate ProcessEndDate
A 2015-04-01 16:30:10.000 2015-04-01 16:32:45.000
B 2015-04-01 16:33:01.000 2015-04-01 16:35:11.000
C 2015-04-01 16:37:00.000 2015-04-02 16:39:25.000
Scenario 2 expected result
Table A
Name StartDate EndDate
Tan 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000
Max 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000
Table B
Item ProcessStartDate ProcessEndDate
Q 2015-04-01 10:39:01.000 2015-04-01 10:41:11.000
W 2015-04-01 11:44:00.000 2015-04-01 11:46:25.000
View 8 Replies
View Related
Apr 29, 2015
I have a query where I need to see in 2 seperate columns, the Actual date of deliveries and collections, and the Invoice Week number of the same. The problem is that in our ERP system delivery date (di.ddate) is a date field, and the collection date is nvarchar. This is my query and sample results below, as you can see I'm getting nulls for the collection lines. How can I do this efficiently
select di.dticket, di.item,
case di.item when 'DEL' then di.ddate when 'COL' then CONVERT(datetime,di.text2,103) end ActDate,
Case when di.item = 'DEL' then
(select YearWeek from MCSReports.RptRevenueGuideWeekLookup
where di.ddate between FromDate and ToDate) end InvWeek
from deltickitem di
where item in ('DEL','COL')
Sample results below:
dticket item ActDate InvWeek
-------------------- -------------------------------------------------- ----------------------- --------
01-000002 DEL 2011-07-05 15:53:00.000 2011-27
01-000002 COL NULL NULL
01-000004 DEL 2011-07-05 16:04:00.000 2011-27
01-000004 COL NULL NULL
01-000005 DEL 2011-07-05 16:08:00.000 2011-27
01-000005 COL NULL NULL
01-000006 DEL 2011-07-05 16:19:00.000 2011-27
01-000006 COL NULL NULL
01-000007 DEL 2011-07-05 16:24:00.000 2011-27
01-000007 COL NULL NULL
01-000008 DEL 2011-07-05 16:29:00.000 2011-27
01-000021 DEL 2011-07-05 08:48:00.000 2011-27
View 6 Replies
View Related
Mar 19, 2015
I am trying to use a date comparison in a statement using the year statement as well. Here is what I have:
Case [LastHireDate]
When YEAR([LastHireDate]) < Year(@EndYearlyDate) then '12'
When Month([LastHireDate]) = '1' then '12'
When Month([LastHireDate]) = '2' then '11'
When Month([LastHireDate]) = '3' then '10'
When Month([LastHireDate]) = '4' then '9'
[Code] ....
When I am looking at it [LastHireDate] is showing that red line underneath. The < symbol has a red line and @EndYearlyDate has a red line. I can not seem to get them to clear and am, wondering what I am missing. When I execute the error comes up that it does not like the < sign in there.
Here is the full piece that the Case resides in:
Insert _Test
SELECT
EmpNo,
PersonIdNo,
REPLACE(PersonTaxIdNo,'-',''),
LastName,
FirstName,
[code]......
View 3 Replies
View Related
Sep 2, 2015
Below is the SQL Query i am currently having
SELECT IG_FinancialTransactionSummary.ClaimNum,IG_FinancialTransactionSummary.TransactionCode,
IG_FinancialTransactionSummary.TransactionDate,IG_FinancialTransactionSummary.Username,
FinancialTransactionSummaryTest.ClaimNum,FinancialTransactionSummaryTest.TransactionAmount,
FinancialTransactionSummaryTest.UserName--,FinancialTransactionSummaryTest.TransactionDate
[Code] ....
And here is the result dataset
ClaimNumTransactionDateUsername ClaimNum TransactionAmountUserName
2000074 20150209jerry.witt 2000074 -10000DATAFIX INSERTED ON 20150626 AT 162152493 LOCAL
2000074 20150626DATAFIX INSERTED ON 20150626 AT 162152493 LOCAL 2000074 -10000DATAFIX INSERTED ON 20150626 AT 162152493 LOCAL
[Code] .....
So,if we look at the result set, we notice 2 conditions where the IG_FinancialTransactionSummary.Username is like 'Data' and if we see the transaction date then sometimes that is the max transaction date or sometimes there are transactions that happened after but that doesn't have like '%data%' in username . So, i need to add a new column to my sql query which should basically verify if the username is like '%data%' and if that is the max(transaction date) or even if there are any transactions after that doesn't have like '%data%' then YES else No.
View 13 Replies
View Related
Jan 5, 2015
I have to produce a report to calculate no of days based on user input start date and end date. I have tried to explain below.
say for eg: in the tables I have emp name
user 'Phani' started work from - EStart 20/11/2014EEnd 10/01/2015 - total days --datediff
within his work period he did different roles:
PhaniMarketing (prSt Date) 20/11/2014prE date (28/11/2014) Total 9 days
PhaniAdmin (prSt Date) 29/11/2014prE date (20/12/2014) Total 22 days
PhaniCRM (prSt Date) 20/12/2014prE date (10/01/2015) Total 22 days
Total days 53 Days
For this :
I calculated datediff + 1 and got sub jobs days BUT
say financial director wants to see Title of 'Sub Jobs' with 'Days' from 1st Dec to 31st Dec
so on paper I calulated as :
1-31 Dec 2014
PhaniMarketing NULL (Do not fall in Req Dt)
PhaniAdmin 20 (Deduct 2 days of Nov & calculated 20 days of Dec)
PhaniCRM 11 (Deduct 20 days of Nov and deduct 11 days of Jan so for Dec , we got 11 days)
Total days 31
HOW CAN I USE Case statement to calculate days for given start date and end date. I have to include all three totals, 1 for Job dates, 2, subjobs dates, 3 cal of days for a requested period.
View 4 Replies
View Related
Aug 16, 2006
I am attempting to write a SQL query that retrieves info processed between two times (ie. 2:00 pm to 6:00 pm) during a date range (ie. 8/1/06 to 8/14/06)... I am new to SQL and am perplexed... I have referenced several texts, but have not found a solution. Even being pointed in the right direction would be greatly appreciated!!
View 6 Replies
View Related
Apr 24, 2008
I have an SSIS package that produces an Excel output file say File1
The Excel output file is created from a previous script task by copying a standard excel template to File1
after the copy, File1 has the disclaimer, legend etc... and a header row at row 10.
So data rows should only start at row 11.
I was googling and found that people who read Excel file using an Excel source component have been successful reading
from a range by the use of the OPENROWSET property. It is said to set this property to Sheet1$A5-B999
to start reading from row 5.
I tried to set the OPENROWSET property to be Sheet1$A11-B999 but am getting an error "Check that object exists"
(Sheet1 does exist) So I guess it is the range that has an improper syntax or something else is wrong.
Please advise. Thanks
View 1 Replies
View Related
Jul 29, 2015
My goal is to select values from the same date range for a month on month view to compare values month over month. I've tried using the date trunc function but I'm not sure what the best way to attack this is. My thoughts are I need to somehow select first day of every month + interval 'x days' (but I don't know the syntax).In other words, I want to see
Select
Jan 1- 23rd
feb 1-23rd
march 1-23rd
april 1-23rd
,value
from
table
View 9 Replies
View Related
Aug 27, 2015
I have a QA Deployment Date field that is being returned in a custom report I created. I also found a sample date range parameter:
What I want to accomplish:
I want to select a From and To Date and filter the report to only display the rows that have the QA Deployment Date within the selected range.
For example.. I want to select From Date (8/1/2105) and To Date (8/31/2015) and I only want to return only the results that have a QA Deployment date between that selected range.
View 3 Replies
View Related
Nov 5, 2007
I have a view where I'm using a series of conditions within a CASE statement to determine a numeric shipment status for a given row. In addition, I need to bring back the corresponding status text for that shipment status code.
Previously, I had been duplicating the CASE logic for both columns, like so:
Code Block...beginning of SQL view...
shipment_status =
CASE
[logic for condition 1]
THEN 1
WHEN [logic for condition 2]
THEN 2
WHEN [logic for condition 3]
THEN 3
WHEN [logic for condition 4]
THEN 4
ELSE 0
END,
shipment_status_text =
CASE
[logic for condition 1]
THEN 'Condition 1 text'
WHEN [logic for condition 2]
THEN 'Condition 2 text'
WHEN [logic for condition 3]
THEN 'Condition 3 text'
WHEN [logic for condition 4]
THEN 'Condition 4 text'
ELSE 'Error'
END,
...remainder of SQL view...
This works, but the logic for each of the case conditions is rather long. I'd like to move away from this for easier code management, plus I imagine that this isn't the best performance-wise.
This is what I'd like to do:
Code Block
...beginning of SQL view...
shipment_status =
CASE
[logic for condition 1]
THEN 1
WHEN [logic for condition 2]
THEN 2
WHEN [logic for condition 3]
THEN 3
WHEN [logic for condition 4]
THEN 4
ELSE 0
END,
shipment_status_text =
CASE shipment_status
WHEN 1 THEN 'Condition 1 text'
WHEN 2 THEN 'Condition 2 text'
WHEN 3 THEN 'Condition 3 text'
WHEN 4 THEN 'Condition 4 text'
ELSE 'Error'
END,
...remainder of SQL view...
This runs as a query, however all of the rows now should "Error" as the value for shipment_status_text.
Is what I'm trying to do even currently possible in T-SQL? If not, do you have any other suggestions for how I can accomplish the same result?
Thanks,
Jason
View 1 Replies
View Related
Aug 31, 2005
In one SQL server table table1 it contains following data
ID Date
CA01-001 01/01/2000
CA01-002 02/01/2000
CA01-003 01/15/2000
CA01-004 02/11/2000
CB02-001 01/01/2001
CB02-002 02/01/2001
ID is grouped by first four characters CA01 or CB02, then each record increased by 1 to be 001, 002 .. untill 999 in sequence
How do I write SQL query just to get each group largerest record such as for our case:
CA01-004 02/11/2000
CB02-002 02/01/2001
Thanks in advance!
View 1 Replies
View Related
Aug 11, 2013
Date parameter. I created a report that allows a drop down for a date range to be selected. However, whenever I preview the report, I get an error. I know my error stems from my date fields being in this format "201301" , and the "date/ time" in SSRS being mm/dd/yyyy on the drop down calendar in SSRS.
I know the direction I want to go in, but just a little confused on where would I use the convert or cast function. Would it be in the data parameter itself, or a part of the query before the @start date and @End date?
View 18 Replies
View Related
Apr 22, 2015
I would like to be able to search by a single date, @StartDate, or by a date range , between @StartDate and @EndDate. I am having a hard time with the logic on this for a report in SSRS.
View 5 Replies
View Related
Sep 28, 2012
I have to display the last temperature reading from an activity table for all the dates in a selected date range.So if I select the date range from 09/01/2012 to 09/30/2012, the results should look like this:
Date Temperature
09/01/2012 73.5
09/02/2012 75.2
09/03/2012 76.3
09/04/2012 73.3
09/05/2012 77.0
09/06/2012 74.5
and so on.
I am using this to get the dates listed:
WITH CTE_DatesTable
AS
(
SELECT CAST('20120901' as date) AS [Date]
UNION ALL
SELECT DATEADD(dd, 1, [Date])
FROM CTE_DatesTable
WHERE DATEADD(dd, 1, [Date]) <= '20120930'
)
SELECT [Date]
FROM CTE_DatesTable
How could I get the temperature if I did a sub-query here?
View 5 Replies
View Related
Jan 23, 2007
I have a report that I need to run on 2 different date ranges.
Both report's data is 2 days behind today's date.
so...
WHERE reportdate between dateadd('d',date(),-2) and dateadd('d',date(),-2)
OR SOMETHING LIKE THAT, NO BIGGIE HERE
The 2nd report is a month to date report. This is the 1 I can't figure out.
WHERE reportdate between (the first day of this month) and dateadd('d',date(),-2)
So that would look like
WHERE reportdate between 1/1/2007 and 1/21/2007
My problem is, if today is the 1st day of the month... how can I get my critiera to NOT do this
WHERE reportdaye between 2/1/2007 and 1/30/2007
Any help would be greatly appriciated!
View 2 Replies
View Related
Jul 23, 2005
Hi Group!I am struggling with a problem of giving a date range given the startdate.Here is my example, I would need to get all the accounts opened betweeneach month end and the first 5 days of the next month. For example, inthe table created below, I would need accounts opened between'5/31/2005' and '6/05/2005'. And my query is not working. Can anyonehelp me out? Thanks a lot!create table a(person_id int,account int,open_date smalldatetime)insert into a values(1,100001,'5/31/2005')insert into a values(1,200001,'5/31/2005')insert into a values(2,100002,'6/02/2005')insert into a values(3,100003,'6/02/2005')insert into a values(4,100004,'4/30/2004')insert into a values(4,200002,'4/30/2004')--my query--Select *[color=blue]>From a[/color]Where open_date between '5/31/2005' and ('5/31/2005'+5)
View 2 Replies
View Related
Jul 26, 2007
Have seen other questions here about modifying date pickers supplied by reports created in BIDS. The answer is usually NO. But this does not involve a format change, simply want to limit say to a specific year.
Any ideas?
View 4 Replies
View Related
Oct 5, 2007
Hi
I have a stored procedure and i am trying to add case statements to them.. but i am getting an Error. which is
Msg 125, Level 15, State 3, Procedure udf_EndDate, Line 34
Case expressions may only be nested to level 10.
And This is my sproc-- ================================================
-- Template generated from Template Explorer using:
-- Create Scalar Function (New Menu).SQL
--
-- Use the Specify Values for Template Parameters
-- command (Ctrl-Shift-M) to fill in the parameter
-- values below.
--
-- This block of comments will not be included in
-- the definition of the function.
-- ================================================
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author:<Author,,Name>
-- Create date: <Create Date, ,>
-- Description:<Description, ,>
-- =============================================
Create FUNCTION [dbo].[udf_EndDate] (@PeriodId int)
RETURNS datetime
AS
BEGIN
DECLARE
@Month int,
@Year char(4)
SELECT
@Month = [Month],
@Year = Cast([Year] as char(4))
FROM
Period
WHERE
PeriodId = @PeriodId
RETURN
CASE @Month WHEN 1 THEN '1/31/' + @Year ELSE
CASE @Month WHEN 2 THEN '2/28/' + @Year ELSE
CASE @Month WHEN 3 THEN '3/31/' + @Year ELSE
CASE @Month WHEN 4 THEN '4/30/' + @Year ELSE
CASE @Month When 5 Then '5/31/' + @Year ELSE
CASE @Month When 6 Then '6/30/' + @Year ELSE
CASE @Month When 7 Then '7/31/' + @Year ELSE
CASE @Month When 8 Then '8/31/' + @Year ELSE
CASE @Month When 9 Then '9/30/' + @Year ELSE
CASE @Month When 10 Then '10/31/' + @Year ELSE
CASE @Month When 11 Then '11/30/' + @Year ELSE
CASE @Month When 12 Then '12/31/' + @Year ELSE null END
END
END
END
END
END
END
END
END
END
END
END
END
Any help will be appreciated.
Regards
Karen
View 8 Replies
View Related
Sep 29, 2015
how to write a query to get current date or end of month date if we pass year and month as input
Eg: if today date is 2015-09-29
if we pass year =2015 and month=09 then we have to get 2015-09-29
if we pass year =2015 and month=08 then we have to get 2015-08-31(for previous months we have to get EOMonth date & for current month we have to get current date).
View 3 Replies
View Related
Oct 25, 2007
Hi;
We received a Payment from a customer on '10/10/2007 10:30:00'. i am trying to calculate the commission we would receive from that payment. the commission rate can be edited. so i have to find what the commission rate was when that payment was received.
I have a CommisionAudit table that tracks changes in commission rate with the following values.
ID | Commission Change | UpdatedOn
----------------------------------------------
1 | Change from 20->25 | 03/07/2007 09:00:00
----------------------------------------------
2 | Change from 25->35 | 10/09/2007 17:00:00
----------------------------------------------
3 | Change from 35->20 | 01/10/2007 16:00:00
----------------------------------------------
4 | Change from 20->26 | 11/10/2007 10:00:00
----------------------------------------------
with this payment, as the commission rate had been changed on 01/10/2007 it would obviously be 20%(ID 3). But I need to write sql to cover all eventualities i.e. Before the first and after the last. any help would be most welcome.
View 11 Replies
View Related
Aug 13, 2014
i was tasked to created an UPDATE statement for 6 tables , i would like to update 4 columns within the 6 tables , they all contains the same column names. the table gets its information from the source table, however the data that is transferd to the 6 tables are sometimes incorrect , i need to write a UPDATE statement that will automatically correct the data. the Update statement should also contact a where clause
the columns are [No] , [Salesperson Code], [Country Code] and [Country Name]
i was thinking of doing
Update [tablename]
SET [No] =
CASE
WHEN [No] ='AF01' THEN 'Country Code' = 'ZA7' AND 'Country Name' = 'South Africa'
ELSE 'Null'
END
What is the best way to script this
View 1 Replies
View Related
May 5, 2015
I am attempting to run update statements within a SELECT CASE statement.
Select case x.field
WHEN 'XXX' THEN
UPDATE TABLE1
SET TABLE1.FIELD2 = 1
ELSE
UPDATE TABLE2
SET TABLE2.FIELD1 = 2
END
FROM OuterTable x
I get incorrect syntax near the keyword 'update'.
View 7 Replies
View Related
May 26, 2006
Hi All,
I've looked through the forum hoping I'm not the only one with this issue but alas, I have found nothing so I'm hoping someone out there will give me some assistance.
My problem is the case statement in my Insert Statement. My overall goal is to insert records from one table to another. But I need to be able to assign a specific value to the incoming data and thought the case statement would be the best way of doing it. I must be doing something wrong but I can't seem to see it.
Here is my code:
Insert into myTblA
(TblA_ID,
mycasefield =
case
when mycasefield = 1 then 99861
when mycasefield = 2 then 99862
when mycasefield = 3 then 99863
when mycasefield = 4 then 99864
when mycasefield = 5 then 99865
when mycasefield = 6 then 99866
when mycasefield = 7 then 99867
when mycasefield = 8 then 99868
when mycasefield = 9 then 99855
when mycasefield = 10 then 99839
end,
alt_min,
alt_max,
longitude,
latitude
(
Select MTB.LocationID
MTB.model_ID
MTB.elevation, --alt min
null, --alt max
MTB.longitude, --longitude
MTB.latitude --latitude
from MyTblB MTB
);
The error I'm getting is:
Incorrect syntax near '='.
I have tried various versions of the case statement based on examples I have found but nothing works.
I would greatly appreciate any assistance with this one. I've been smacking my head against the wall for awhile trying to find a solution.
View 10 Replies
View Related
Feb 20, 2008
i want to display records as per if else condition in ms sql query,for this i have used tables ,queries as follows
as per data in MS Sql
my tables are as follows
1)material
fields are -- material_id,project_type,project_id,qty, --
2)AB_Corporate_project
fields are-- ab_crp_id,custname,contract_no,field_no
3)Other_project
fields are -- other_proj_id,other_custname,po
for ex :
vales in table's are
AB_Corporate_project
=====================
ab_crp_id custname contract_no field_no
1 abc 234 66
2 xyz 33 20
Other_project
============
other_proj_id other_custname po
1 xxcx 111
2 dsd 222
material
=========
material_id project_type project_id qty
1 AB Corporate 1 3
2 Other Project 2 7
i have taken AB Corporate for AB_Corporate_project ,Other Project for Other_project
sample query i write :--
select m.material_id ,m.project_type,m.project_id,m.qty,ab.ab_crp_id,
ab.custname ,op.other_proj_id,op.other_custname,op. po
case if m.project_type = 'AB Corporate' then
select * from AB_Corporate_project where ab.ab_crp_id = m.project_id
else if m.project_type = 'Other Project' then
select * from Other_project where op.other_proj_id=m.project_id
end
from material m,AB_Corporate_project ab,Other_project op
but this query not work,also it gives errors
i want sql query to show data as follows
material_id project_type project_id custname other_custname qty
1 AB Corporate 1 abc -- 3
2 Other Project 2 -- dsd 7
so plz help me how can i write sql query for to show the output
plz send a sql query
View 8 Replies
View Related
Sep 21, 2006
HiI am using SQL 2005, VB 2005I am trying to insert a record using parameters using the following code as per MotLey suggestion and it works finestring insertSQL; insertSQL = "INSERT INTO Issue(ProjectID, TypeofEntryID, PriorityID ,Title, Area) VALUES (@ProjectID, @TypeofEntryID, @PriorityID ,@Title, @Area)"; cmdInsert SqlCommand; cmdInsert=new SqlCommand(insertSQL,conn); cmdInsert.Parameters.Add("@ProjectID",SqlDbType.Varchar).Value=ProjectID.Text; My query is how to detail with dates my previous code wasinsertSQL += "convert(datetime,'" + DateTime.Now.ToString("dd/MM/yy") + "',3), '";I tried the code below but the record doesn't save?string date = DateTime.Now.ToString("dd/MM/yy"); insertSQL = "INSERT INTO WorkFlow(IssueID, TaskID, TaskDone, Date ,StaffID) VALUES (@IDIssue, @IDTask, @TaskDone, convert(DateTime,@Date,3),@IDStaff)"; cmdInsert.Parameters.Add("IDIssue", SqlDbType.Int).Value = IDIssue.ToString();cmdInsert.Parameters.Add("IDTask",SqlDbType.Int).Value = IDTask.Text;cmdInsert.Parameters.Add("TaskDone",SqlDbType.VarChar).Value = TaskDoneTxtbox.Text;cmdInsert.Parameters.Add("Date",SqlDbType.DateTime).Value = date;cmdInsert.Parameters.Add("IDStaff",SqlDbType.Int).Value = IDStaff.Text;Could someone point to me in the right direction?Thanks in advance
View 3 Replies
View Related
Aug 30, 2007
I have a order table which has a orderdate and despatchdate
i want to write a query in such a way that i want to get all the details from the table for a range specified date as the oderdate and despatchdate are user
interactable. I search the google to solve this problem but could not find a answer
View 10 Replies
View Related
Jan 14, 2005
What is the best way to do a where clause that includes a date range. Ex. WHERE date1 BETWEEN @Begin Date AND @EndDate. I want to include all of the @EndDate.
View 6 Replies
View Related
Aug 9, 2007
I am working on a report for staff productivity, and have to get a summary figure for how much productivity was expected for a date range. The problem is that the amount expected from an employee can change if they move from full time to part time etc.
So I have a view that has the begin date, end date, expected daily production # by employee, and have to figure out how to get the multiplication to work correctly.
Example:
Employee 1 had a daily production # of 10 from 1/1/07-3/31/07 and daily production of 5 from 4/1/07 - now
If I run the production report for 1/1/07 - 6/30/07 what I want is one summary figure of for the entire range which would be 10*Datediff(d,1/1/07,3/31/07)+5*Datediff(4/1/07,6/30/07) or 890+450=1340.
Of course the actual date range for the report will be a variable, and the dates for the begin and end of a production date range will be all over the place.
Any quick and easy way to do this?
View 4 Replies
View Related
