If I want to change the value of a special bit in a column, how to wirte the SQL sentence in sqlserver.
I mean in a column, the value is 'test', then how to change the 's' to 'e' or any other value by just one SQL sentence.
Thanks.
Hi, all friends. I'm using SQL-SERVER 2000.I have a table like this:NIF Name----------------------------------------A-1234 Company1B-123-B1 Company2C-4568 Company4D-453-DF Company5I want delete the symbol "-" in the row "NIF". eg. A-1234 change toA1234, D-453-DF to D453DFSo how can I write the sentence . Should I use the Stored Procedure?Thank you very much!!Simon
View 2 Replies View RelatedHi, I need to make a query that, according to the value of a field, returns an specified value.
ie:
TABLE:
Col1
1
0
I need to make a query like:
SELECT (????) FROM TABLE
and if Col1=1 returns 'Assigned' and if Col2=0 it returns 'Unassigned'
So the result from the query for the data above is:
Assigned
Unassigned
Thankx
Hello forum. I address you in order to help me for create a little sentence.
the problem is as:
I have a table "STAMPING" that save data as:
TIMESTAMP------------USER_ID-----TERMINAL_ID----CHIP_ID
19/05/1982 15:30:31 1 1 1
19/05/1982 15:31:29 1 1 1
19/05/1982 15:31:55 1 1 1
19/05/1982 16:25:46 1 1 1
19/05/1982 16:26:23 1 1 1
19/05/1982 16:26:34 1 1 1
19/05/1982 22:23:56 1 1 1
19/05/1982 22:24:23 1 1 1
and I would need to filter them as-->
TIMESTAMP------------USER_ID-----TERMINAL_ID----CHIP_ID
19/05/1982 15:30:31 1 1 1
19/05/1982 15:31:29 1 1 1
19/05/1982 15:31:55 1 1 1
19/05/1982 16:25:46 1 1 1
19/05/1982 16:26:23 1 1 1
19/05/1982 16:26:34 1 1 1
19/05/1982 22:23:56 1 1 1
19/05/1982 22:24:23 1 1 1
20/05/1982 06:10:29 1 1 1
20/05/1982 06:11:51 1 1 1
TIMESTAMP------------USER_ID-----TERMINAL_ID----CHIP_ID
19/05/1982 15:30:31 1 1 1 <<<----
less (difference) --> 00:56:03
19/05/1982 16:26:34 1 1 1 <<<----
19/05/1982 22:24:23 1 1 1 <<<----
less (difference) --> 07:45:00(+/-)
20/05/1982 06:11:51 1 1 1 <<<----
So, I need to delete the "timestamps" the an user has done, which the difference between one stamping and the following one is less than 2 minutes for the inputs for entrances and I need to remove it when the "stampings" which the difference between an one stamping and the previous one is less than 2 minutes for exits.
Can you help me please?
I will appreciate a lot your help.
CNUECOD is primary key in VTA020SAP2 table
TIA
Violation of PRIMARY KEY constraint 'PK_VTA020SAP2'. Cannot insert duplicate key in object 'VTA020SAP2'.
The statement has been terminated.
INSERT INTO VTA020SAP2 SELECT VTA020SAP1.*, NULL as xCLIPRO, NULL AS xPAIS, NULL AS xCONFREI, NULL AS xCONCPER,
NULL AS xMONEDA, NULL AS xFAX, NULL AS xTIPEXP, NULL AS xCASILLA, NULL AS xDIAENTR, NULL AS xPUNVEN,
NULL AS xCIUDAD, NULL AS xREGION, NULL AS xCONDIC, NULL AS xINSPAG, NULL AS xCUMPLE,
NULL AS xPERVIS, NULL AS ESTADO FROM dbo.VTA020SAP1
INNER JOIN VTA020
ON VTA020SAP1.CNRCLI = VTA020.CNRCLI
AND VTA020SAP1.CNRCLI IN (SELECT MAX(VTA020SAP1.CNRCLI) FROM VTA020SAP1
GROUP BY VTA020SAP1.CNUECOD)
AND (not EXISTS
(SELECT VTA020SAP2.* FROM dbo.VTA020SAP2
INNER JOIN VTA020SAP1 ON VTA020SAP1.CNUECOD = VTA020SAP2.CNUECOD
WHERE dbo.VTA020SAP2.CNUECOD = dbo.VTA020SAP1.CNUECOD))
Hello !!
I'm using the sentence NOLOCK for selects, but I have many sentences, Is there any way to set a parameter in the DBMS, to use NOLOCK parameter by default ???? I mean, I don't like to lock any table for selects.
Is It possible ???? How to do It (step by step) ?
Thanks !!
Set @mSQL = 'SELECT Max([AccountID] + [ItemID] + [StorehouseID] + [BINID] + [LotItemID] + Convert(varchar(10),[BalDate],111)) AS [KEY],
AccountID, ItemID, StorehouseID, BINID, LotItemID INTO [xIV_tblStockSumLastDate' + ']
FROM IV_tblIVMaster
WHERE (BalDate<= 'Exec(@mSQL + '''' + @mtxtDate + '''' + ')
GROUP BY ItemID, AccountID, StorehouseID, BINID, LotItemID')
i have insert/update SQL sentence, but sometimes there are empty values because there not required in the database so sometimes the sql sentence look this way:
INSERT INTO EquipmentAndPlace (EquipmentID,EquipmentEmdaNo,EquipmentPlace,EquipmentIDForRecognize, EquipmentRemarks,EquipmentLastChecked) VALUES ('3','','2','1','','12/1')
with empty values, but then it doent update in the dataBase-only if all the values appear-
what the solution of it?
Thanks
I have two tables. A table called users (content speaks by it self) and a table called groups.
Since i want every user to be able to be a member of several groups and, of course, a group to have several users i have made a junction table called jt.
The junction table contains userId's and groupId's according to the user-group bindings. The primary key(identity) in the junction table is a int named jtId.
Now i want to take out all posts from the junctiontable and the corrresponding userName (s) from the users-table and the corresponding groupName from the groups-table.
Can somebody please help me to make a SQL command that will di that for me. I have tried with INNER JOIN and several SELECTS in the same command.
Thanks in advance, Greetings from Esben
Hello,
I would like to know how can I change a "not in" clause with the same results in a SQL sentence in order to improve the performance of my SQL sentence.
I am working with SQL Server 2005
Thanks,
jmota
Hi,
I want to add a parameter to the following SQL-sequence. ActivityGroup is the table and I want to select the current activityGroupID in place of XXXXX. Do I need to put this in a stored procedure?
select * from ActivityGroup where cpgActivityGroupID = XXXXX and cgpRegistredFrom > getDate() and cgpRegistredTo < getDate()";
Thanks in advance!
Hi,
I have a project in which I have about 20,000 records in sql database table.
What I would like to do is generate a query that lists all the unique words in a particular field acros the entire table so as to generate a glossary of words.
if we had a table that looked like
ID Description
001 This is the first record
002 This is the second record
003 This is not the first record
and the query was run on the description field, then the result I would like to see is
This
is
the
first
second
not
I hope this makes sense. Any help is appreciated.
Hi All,
I want to give the users the ability to highlight words in sentences on the page in different colors.
Please see link below for an example(watch out for URL wrapping):
http://64.233.161.104/search?q=cache:fKHSRIxERbUJ:www.codeguru.com/columns/DotNet/article.php/c6603/+XML+serialization+in+.net&hl=en
My MASTER table that contains text is very simple:
TEXT_ID INT
TEXT varchar
I was thinking of something like creating another table to keep track of selection criteria:
USER_NAME varchar // keeps track of which user made the selection
TEXT_ID INT // points to the text id in the MASTER table
START_POS INT // start position of the selection
END_POS INT // end position of the selection
COLOR INT // color of the selection
The thing I don't like about this method, is if user(s) have many words higlighted in the sentences, this table may get very large.
I also thought of maybe combining START_POS, END_POS & COLOR into comma delimited entries:
EX: 1:5:240, 25:30:125 // START_POS:END_POS:COLOR
The thing I don't like about this method, the parsing calculations may take a while to execute.
My goal is to stream as much text data as possible and make it as fast as possible. How does Google or any one else do it?
P.S. Having a copy of a MASTER table with HTML tags in TEXT field is not an option.
Thanks,
Vlad
I have to parse a sentence into separate words. This has to be done in a Stored Proc.
If the sentence is: "The sun is rising". Then I want to store the words "The" "sun" "is" "rising" into 4 separate variables. (The separator is a space).
Has someone already written something like this before? I do not want to re-invent the wheel.
Thankx.
KP
CREATE TABLE [dbo].[instructions](
[site_no] [int] NOT NULL,
[instructions] [text] NULL
)
Select top 3 * from instructions
Output
Site_no Instructions
20 Request PIN#510 then proceed
21 Request PIN#987 if wrong request name
22 Request PIN#688 allowed to use only numbers
All text instructions start with “Request PIN#XXX” also after that the text are different for every site_no
I need insert in all site_no rows and after the “Request PIN#XXX” the text “and codeword” keeping the current rest of text
How can I set e REPLACE CAST sentence using something LIKE PIN%%%%
To get these type of results
site_no instructions
----------- ----------------------------------------------------
20 Request PIN#510 and codeword then proceed
21 Request PIN#987 and codeword if wrong request name
22 Request PIN#688 and codeword allowed to use only numbers
the talbe row like this:
ID Name Scoe 11 Tome 20 12 Jack 30 11 Tome 40 12 Jack 10 13 John 10
My query command like this:
Select T1.Id,T1.Name,T2.mathfrom st T1right join(Select Id as Id2,Sum(Math) as Math from St group by id) T2on T1.id=t2.id2where t1.id = t2.id2
While the reuslt is :
Id Name Score
11 Tom 60
11 Tom 60
12 Jake 40
12 Jack 40
13 John 10
I am wonder :the T1 gives a table with six rows, the T2 gives a table with three rows, and I use RIGHT JOIN to connect the two table,the result should be a table with only three rows.I tried INNER JOIN, the result is same.
but why ? please help me !
Is it possible to pass entire where sentence to a store procedure?From app, I'll generate a where sentence like below:
where orderID = '123' and orderCidy='London'
I created a store procedure like below but got an error said that An expression of non-boolean type specified in a context where a condition is expected, near 'END'
CREATE PROCEDURE getorder
@mywhere VARCHAR(100)
AS
BEGIN
SET NOCOUNT ON;
select * from order @mywhere
END
Hi everyone!I am working with Delphi v7 and MS SQLServer.I am trying to insert data in a table with a SQL sentence. Some of thefields of my table are type char or varchar, and they can have nullvalues.What do i have to write in the SQL sentence to insert a null value inthose fields?I tried with '', an empty String, but it doesnt work, the tablesstores an empty String (logical :-)).In the SQLServer GUI you have to press CTRL + 0 to insert a NULLvalue, but how can i tell this to the SQLServer through a SQLSentence?Well, thank you very much.
View 2 Replies View RelatedI was recently told SSRS does not support the ability to underline a portion of text in a sentence. Does anyone know if this is true? Couldn't "text decoration" "underline" and "span" be used to underline the web address in the sample sentence below?
"Please visit our website at: www.abc.com"
Thanks
I have a illegal keyword table name as "Illegal_keyword_Master" where near about 2000 illegal keyword are stored... Now I have a big Sentence(bunch of words)...
If any illegal is keywords is found from "Illegal_keyword_Master" table in that sentence then the sentence is "banned" otherwise the sentence is "OK"....
I have an very long ntext field, made up of many sentences that I append a full stop to every one, I also strip out any line breaks within the text. However I get this error, when I look it up it comes up with "Failed to locate the ending boundary of a sentence."
View 0 Replies View RelatedHi,
I tried to backup the master key by the following syntax :
OPEN MASTER KEY DECRYPTION BY PASSWORD = 'mypassword'
BACKUP MASTER KEY TO FILE = 'c: empmaster' ENCRYPTION BY PASSWORD = 'mypassword'
but it failed and i got the following message:
Cannot write into file 'c: empmaster'. Verify that you have write permissions, that the file path is valid, and that the file does not already exist.
NB: I am using the "sa" user to execute this command.
I know that we have a security permission issue , but where and how ?
Regards,
Tarek Ghazali
SQL Server MVP
For example,I have a table "authors" with a column "author_name",and it has three value "Anne Ringer,Ann Dull,Johnson White".Here I want to create a new table by using a select sentence,its columns come from the values of the column "author_name".
can you tell me how can I complete this with the SQL?
I have a table T1
ID Desc
1 aaaa
1 bbbb
1 cccc
2 aaaa
2 cccc
3 cccc
Now, I need to group by ID and make Desc column as follows in a new table
ID Desc
1 aaaa, bbbb, cccc
2 aaaa, cccc
3 cccc
How can I do this?
I have table T1 with fields T1.ID, T1.CheckBoxCol
The T2 tabel has the same ID as T2.ID and T2.CheckBox1, T2.CheckBox2, T2. CheckBox3
Now, I need to check T1 and
if T1.CheckBoxCol=1 then set T2.CheckBox1=1
else if T1.CheckBoxCol=2 then set T2.CheckBox2=1
else if T1.CheckBoxCol=3 then set T2.CheckBox3=1
for each T1.ID
How can I do this?
Hello,
I have MyTable with ID, IsYesNo fields
ID is duplicated so I need perform select on MyTable with the following conditions:
1. Select all the ID distinct where IsYesNo=’Yes’ first
2. Then select all the ID distinct where IsYesNo=’No’ if ID is not in the first selection
Combine these two and return the result
I'm sure this is really basic. I've created a simple form that on submittal, I would like the text boxes to be submitted to the database. I have successfully created the Datasource and it connects ok, but what code would i use to submit one text box for email address and a simple submit button. Is there an easy way to do this with VWDE?
Thanks
Hi,I
have a hotel reservation system.I need to implement Check availability
(Room checking) function for the project.But I dont understand how do I
start and write SQL for this.Here is table structureTblRooms------------RoomsIDRoomNameNoteunitPriceSeasonalOffersTblReservation----------------ReservationIDArrivalDateDepartureDateArrivalFromFlightNoPurposeOfVisitTblRoomsInventory-------------------RoomsInventoryIDTotalRoomsBookedRooms Should I add more fields or table to implement this or this is enough .please any body can help me
How to write this SQLSelectCommand="SELECT DISTINCT TblOrder.CustomerUID, TblOrder.OrderHiddenID, TblPayment.PaymentAmount, TblPayment.Result, TblOrder.OrderID FROM TblOrder CROSS JOIN TblPayment WHERE (TblOrder.CustomerUID = @IsCustomerID) AND (TblOrder.OrderHiddenID = @IsHiddenID) AND (TblPayment.Result = 'Pending')"How to get latest order id from this.I need to combine it with above sql.I mean i want to select above records but based on max orderid record.such as select latest records from ....above SQL where max orderid
View 2 Replies View RelatedI need to compare two column in two different tables but I do not know how to write this query.
Example:
Table1
-------------
EmployeeSSN
EmployeePayRate
Table2
-------------
EmployeeSSN
EmployeePayRate
I need the result set to look like this
Result Set
-----------------------------------------------------
EmployeeSSN T1Rate T2Rate Same?
-----------------------------------------------------
111-11-1111 8.95 8.95 True
222-22-2222 9.95 8.95 False
333-33-3333 8.95 NoMatch False
444-44-4444 NoMatch 8.95 False
and so on....
How do I write this in Transact-SQL also using a function to return the "NoMatch" and True or False statements?
Thanks,
Roger
Hey all.. Sorry I have never written a SP in my life.
so this would be a newbie question for sure.
Using sql server 7.
Here is my table field setup with sample values all fields are numeric
except date
weekending size effic dailycap workdays planutil demand
variance
5/172002 8 80 85 5 244
102 142
A file with source data will be made available in comma delimitted format to
supply a new weekending value, size and demand.
What I will need is first the dts to bring that in. then I am assuming a
stored procedure to be run (this is why I am here)
to add the data from the comma del. file into the table. If the data EXISTS
I would want it to UPDATE the values that are in the dest table but run a
calculation first which would be the planutil minus demand then the result to
be updated intot the record.
if the record from the tab del. file does not exisst in the dest table then
insert it.
another words the logic i have in mind
read the data from the temp tample (where the file gets imported into)
see if the record exists in the live table is it does update it with the calculation of planutil minus demand
if not create the new record in the live table.
I need it to compare..
Someone help me with some code
i thank you kindly in advance
p.s. And good books dedicated to stored procedures??
Many thanks in advance for anyone that can help me write this qry:
To summarise - we have a database that links components to services. Components can have a 1 to many relationship with services. The components are held in a table:
dbo.components
compID compName compType
1 srv1 1
2 srv2 1
3 srv3 1
We also have a services table which hold all our various services we own:
dbo.services
svcID svcName
1052 svc1
1053 svc2
1054 svc3
We then have a tbl that shows the links between components and services
dbo.compUses
svcID compID
1052 310
1052 400
1053 122
1256 134
I would like to find out through the qry what components are currently NOT linked to a service. This will allow me to find out what components have no relationships.
This is in SQL2005.
Have I explained this well enough? Any help would be much appreciated!
Hey peeps, fishkake's back, and he's more clueless than ever!
OK, after a few days of wrestling with books and experimenting, I now know all about reading SQL. Well, what that means is I understand Select From Where etc etc.
How do I write data? I have a reference guide, if somebody could give me literally a few high-level commands that are to do with writing data in a similar way to reading it with the SELECT statement, it would be very helpful...
This site is just making me lazy now...