Hi,I need to know the way in which I can copy my sql server 2005 database from one computer to another ?
Please I need a clear and complete explanation ,thanx .
Currently I'm working on my Desktop computer but I wanna put all my data to my laptop so that I could continue my work on my laptop.
How can I transfer my SQL Server database to my laptop?
I have SQL server 2005 on a Windows 2003 machine. The machine is old and I need to move the entire SQL server to a new machine. There are many databases and users that need to move across to the new server. Detaching and attaching the databases would be tedious due to the large number of databases. Is there a way of moving the DB's and SQL users to the new machine without having to do each db one at a time?
Additional info that might be helpful:
The new server's IP address and name must also change to that of the old server.
The old server initially had SQL 2000 on it and was upgraded to SQL 2005.
The new server was installed with SQL 2005 only. Hence the Database and log paths differ between the old and new server.
Any help would be appreciated.
Hi,
Can someone suggest a good way to move the CSK database from ine instandc of MSDE200 to another on a different PC. I tried exporting using MS Web database administrator which moved the tables but stripped off the defaults and all stored proceedures.
Any better ideas?
Hal
I am working with one other person on a VS 2005 vb.net web project that accesses SQL Server 2005. Both the computers are connected and my partner can run the application on his computer from his VS 2005 but we are getting an error on our first databind to a gridview on the page we are trying to run the error is below
A connection was successfully established with theserver, but then an error occurred during thepre-login handshake. When connecting to SQL Server2005, this failure may be caused by the fact thatunder the default settings SQL Server does not allowremote connections. (provider: Named Pipes Provider,error: 0 - No process is on the other end of the pipe.)
I check the properties of the SQL Server and the check box is checked that says allow remote access. I am not sure what to do.
Hi All
I have Computer is setuped SQL Server 2000 and SQL server 2005 when I restore SQL Server 2005 it's OK but when it's not OK when I restore in SQL Server 2000. The Error as follows:
Please help me to solve this problem. Thanks
I have a very basic console application whose sole purpose is to query a database on the same local computer. When i run the application, i get the error message below:
Cannot open user default database. Login failed.Login failed for user 'someDomainSomeUserName'.
Below is my connection string also
myconnection_string = New SqlConnection("Data Source=.SQLEXPRESS;AttachDbFilename=C:Reporting SystemApp_Datasafetydata.mdf;Integrated Security=True;Connect Timeout=30;User Instance=True").
After some googling, some post pointed to deleting a user folder at :
C:Documents and SettingsmyusernameLocal SettingsApplication DataMicrosoftMicrosoft SQL Server DataSQLEXPRESS
but still deleting that folder and restarting the machine doesn't help and i also have remote connections enabled. Help is really needed.
NOTE: The same application runs on a different computer with XP but fails on the Pc with windows server 2003.
How to import database in SQL server 2005 from the SQL server 2000 ??
Hi,
We have an old machine which holds SQL server 2000 database. We need to migrate a whole database to a new machine which has SQL server 2005.
When we tried to move whole database using Import and Export Wizard, only tables can be selected to import/export. However we want to import/export the whole database, including tables, stored procedure, view, etc. Which tool should we use?
Thanks.
Hi,
We have an old machine which holds SQL server 2000 database. We need to migrate a whole database to a new machine which has SQL server 2005.
When we tried to move whole database using Import and Export Wizard, only tables can be selected to import/export. However we want to import/export the whole database, including tables, stored procedure, view, etc. Which tool should we use?
Thanks.
Hello
We have developed a database with a lot of information in and we are going to move this database from a Win XP with SQL 2005 Express to a Windows 2003 server with MS Sql Standard 2005. How can we do that?
Hello,I have a database in 2005 that I'd like to copy and attach in 2000. Is thispossible? if so, how do I do it? I've tried doing a number of things fromjust trying to attach to the db file to trying to export and import viaaccess and I can't seem to get anything to work.Any help would be greatly appreciated.Thanks!Rick
View 1 Replies View Relatedi am having some issues..hopefully someone can help me..i just finished my database class...we had to install sql server 2005...i am running windows xp home...when i went to install sql...there was one error that i was getting...it was about the iis function, which i know that it won't work with the home edition...i finished the install, without the iis, so i can try to work on some things for class...i also had to install northwinds and pubs...now that the class is over, i want to get rid of it all...i tried to follow somewhat of the uninstall process but now i am getting problems...i can't figure out how to uninstall the northwinds and pubs..it keeps saying that it is being used by another person or program and it won't let me uninstall....can someone what me through the uninstall process of both the northwinds, pubs, and all of sql server 2005...i don't know much about computers....thanks you so much for helping in advanced...
crystal
I created a table in an SQL 2005 database, however, I want to move that table and the data to another SQL 2005 database (within the same server). I am new to SQL 2005 and detailed instructions would be greatly appreciated.
Thanks
Bill
Will SQL Server 2005 developer edition and Visual Web Developer Express
work on the same machine? One reviewer of SQL Server 2005 developer
edition on amazon.com stated won't work on the same machine? Is this
true?
Does anyone know whether or not both versions can be installed on the same machine?
View 1 Replies View RelatedI am unable to connect to a remote server on Computer A from Computer B, but when I reverse it I am able to connect to a remote server on computer B from computer A. I have SQL Server 2005 Developer Edition on both computers. I am using the using the SQL Management Studio to connect. Both Computers have these settings
Using Surface Area Configuration both have local and remote connections checked. Both computers using tcp/ip only checked.
Using Configuration Manager both the sql server and the sql browser are running. Both computers have tcp/ip protocols enabled.
Under the server properties on both computers, under the Security Tab, I have SQL Server and Windows Authentication Mode checked. Under the Connections tab I have Allow remote connections on this server checked.
I believe I have the Security for both the server and databases done properly giving them both proper Logins and User Roles with the proper permission.
Also went to my window firewall settings and under the Exceptions tab, I added both the sql server.exe and sql browser.exe programs on both computers on my remote network.
But when I connect on Computer B, I get an error message stating:
TITLE: Connect to Server
------------------------------
Cannot connect to 'ServerName'
------------------------------
ADDITIONAL INFORMATION:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 233)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=233&LinkId=20476
------------------------------
BUTTONS:
OK
----------------------------
I tried pinging server a and then server b and they both pinged.
Could someone please tell me what could be wrong on my remote computers.
I have installed SQL server 2005 and after I uninstalled it. and tried to install again but my computer recognize the old version of Sql Server 2005 and only allow to install documentation and client components
How to unintall Sql server 2005 complete from my computer ?
The prerequire componets for my program are:
1.sql server 2005 engine
2.sql server 2005 reporting services
3.sql server 2005 analysis services
4.sql server 2005 integreted services.
so how can i detect wheter the destination computer has installed the above components or not?
I now know only I can install both .Net 1.1 and 2.0 on one computerbut I don't know, Can I do it on SQL Server ? Please advise me....
View 8 Replies View RelatedHello,
Sorry for my question, I know, that there were several topics about sql 2000 vs SQL 2005, I read all them but unfortunately I haven't got the correct answer. I must install my intranet application that uses asp.net 2.0 and SQL 2005 Express to a Windows 2003 server with SQL 2000. It is possible to install SQL 2005 Express beside the 2000 server? It is very important, because I have no possibility to test and that Win2003 server there are a few programs that use SQL 2000. What will happen with the 2000 databases and their programs if I install the 2005 Express to the server? They will work fine with 2000 and my application will work with 2005?
Or instead it should I configure my application to use 2000 capable connentionstrings?
Hello Everyone,
I just got a Virtual Dedicated Server and installed SQL Server Express 2005 on it and while I was installing choose Mix Mode authentication and setup a sa password.....
I want to connect to that database remotely from my machine using VS 2005 or Management Studio....both are encountering the same problems.....
On the Virtual Dedicated machine if I install management studio I run has no problem....it asks me for the server name : somethingSQLEXPRESS then username and password and works fine...
The same thing I try to do remotely is not happy with ....I tried to give the IP address of the server same thing no luck.....
Can somebody tell me what I'm doing wrong and where....
Thanks,
Harsimrat
Hi,
View 18 Replies View RelatedHello all,
New forum member here, and pretty new to SQL Server. My question is I'm having an impossible time trying to connect MS Access on Computer A to a database running on SQL Server 2k (SP3) on Computer B. Every time I try to create a new ODBC connection on Computer A, I get the dreaded Server Error 17 (SQL Server does not exist or access denied). I have no problems making the ODBC connection on the computer running SQL Server (Computer B).
My connection settings are as follows:
Computer A name = MAINDESKTOP
Computer B name (contains SQL Server) = HOMELAPTOP
Workgroup name = WORKGROUP
Server Properties:
Name = HOMELAPTOP
Authentication = SQL Server and Windows
Registered SQL Server Properties = Use SQL Server authentication, and I'm using a login name and password
Server Network Utility = TCP/IP network protocol enabled, with default port 1433
Server Client Network Utility = TCP/IP network, default port 1433
Under "Security", I have created a new login using SQL Server Authentication called "bradley", and have assigned a password to the new login. I've noticed that when I open the login properties dialogue, there are always more ***'s in the password field than the number of characters I originally used, but I suspect that's normal. I have assigned a database called "Costume" to "bradley", and have verified that the permission is checked on the Database Access tab for user "bradley".
Under "DatabasesCostume", I have verified that there is a user called "bradley" with the same login name and user name.
No matter what I try, I can't get Computer A to connect to Computer B's SQL Server database. I have no problems with any other types of connections (pinging, internet, file transfers).
This can't be that difficult! Any ideas?
Thank you!
Brad
Hi,
I'have this error during install of Microsoft SQL Server 2005 Express Edition (x86). I'm Using Windows XP Professional with SP2 Build 2600. Does anyone knows how to solve this?
****
Microsoft SQL Server 2005 Setup was unable to install on your computer.
EventType : sql90setup P1 : unknown P2 : 0x659 P3 : unknown
P4 : 0x659 P5 : unknown P6 : unknown P7 : msxml6.msi@6.10.1129.0
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSqlSetup0001.cab
Hi,
I have an ASPNETDB.MDF (asp.net membership/profile db) that was generated for SQL Express, it has user information I need to keep.
I have SQLExpress and full SQL Server 2005 running on the server. I want to remove SQL Express from the server.
So can I simply do a backup of the SQL Express membership db and restore it to full SQL and change the connection string in my app or
do i need to run the membership wizard on full sql and then do the backup / restore?
Or is there another way.
Thanks
I have a client that has POS software called Restaurant Pro Express (RPE) from www.pcamerica.com
Their old POS computer had a hardware failure, but I was able to attach the hard-drive to another computer and recover the data. RPE uses a MSSQL database system. However, my client doesn't seem to make backups very often - the last one is dated January 5, 2015.
I was able to copy the C:Program FilesMicrosoft SQL Server folder over which contained the instance as well as all the data files - and has up-to-date information. The instance in the recovered Microsoft SQL Server folder was called MSSQL.1. I installed the RPE software on their new computer, and it too now has an instance called MSSQL10_50.PCAMERICA. The new computer is using MSSQL 2008 R2, while I believe the old computer would have been using MSSQL 2005.
Hi All!!!
In my Computer has MS SQL Server 2000(with default Instance) and now I Install MS SQL server 2005(with Instance name: SQL2005 ). Now I want to write Web Application to connect to the both databases (SQL Server 2000 and MS SQL Server 2005), How to Add connection string in my web.config to do it.
Help me ???
Thanks & Regards,
Hello allMy computer was installed with SQL Server 2005 Developer version, however, I checked the Default Web Site in Internet Information Service console and saw that the ASP.NET configuration was not correct as below."data source=.SQLEXPRESS;Integrated Security=SSPI; AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true"I have a question that can I replace the string, “.SQLEXPRESS”, with my server name and my SQL Server 2005 Developer named instance as below“DEVSERSQL2005Dev”?Thanks in advance for your help.
View 3 Replies View RelatedI have a user who is trying to load SQL server 2005 Express on a new Acer laptop computer. The computer has the following:
Windows Vista Home Premium 32 bits
AMD Turion 64 mobile technology CPU
1790 MB of RAM
When the user tries to load SQL server 2005 Express it does not load. The user after the load is getting an €œUnhandled exception has occurred in your application€? when he tries to run the application.
Does anyone know how to fix this problem?
Thank you,
Photomultiplier
Hi All,
I've developed an application that connects to a SQL Server 2005 Express database. I created a DSN to connect to the database through ODBC. Currently, I am testing locally and everything works fine.
I would now like to install my application on another workstation and connect remotely to the database located on my development machine.
The client workstation does not have SQL Server 2005 Express installed on it because I would just like my application to connect remotely by creating the DSN and using ODBC. What I'm missing here are the database drivers. The "SQL Natice Client" is not available on this client workstation. How can I deploy the necessary drivers with my installation file so that I may create the required DSN name using the SQL Native Client driver?
Thanks!
how to move sql diagram from one sql server 2005 to another?
View 1 Replies View RelatedPlease could someone help?
I'm about to launch a website however I'm having trouble moving my SQL 2005 database from my development server (developer edition) to my web host server.
I'd like to do a backup/restore but I don't seem to have permission to do that - restricted to their directory for restore.
So I have done this in management studio:
1. Tasks -> Generate Scripts, Script all objects. On the development database.
2. Needed to remove the following lines since it errored otherwise when executing the script!
IF NOT EXISTS (SELECT * FROM sys.database_principals WHERE name = N'adaspnet')
CREATE USER [adaspnet] FOR LOGIN [PIRATEASPNET] WITH DEFAULT_SCHEMA=[dbo]
3. Create new SQL 2005 database on host and ran the script.
4. Tasks -> Import Data. On the live database. It keeps crashing with "there is already an object named vw_aspnet_Applications" etc. I have got it to work by excluding all the vw_ entries from the import. It now works!!!
The question is this: Is what i've done ok? Is there a cleaner and better way etc?
I've only just started learning SQL server and therefore I'm a complete novice so any help would be much appreciated.
Thanks,
Kotdot