I NEED TO UPDATE THESES RECORDS BASED ON THIS QUERY
select * from property where
Lis_key in(select lis_key from property where substring(func_key,1,5)='GEOSS'
And substring(func_key,6,8) >=3)and
Func_key = 'PV000000'
and substring(Attrib_code,5,2)!=16
AND ACTIVE = 1
order by Lis_key
HELP ME
I have the following table
Code:
10012014-09-01 00:00:00.000BH1-Z-1280180
20012014-09-01 00:00:00.000BH1-Z-9990300
30012014-09-01 00:00:00.000CHO1-Z-1280180
40012014-09-01 00:00:00.000CHO1-Z-9990306
50012014-09-01 00:00:00.000OT11-Z-99906
60012014-09-01 00:00:00.000WRK1-Z-1280180
70012014-09-01 00:00:00.000WRK1-Z-9990306
80022014-09-01 00:00:00.000BH1-Z-0800480
90022014-09-01 00:00:00.000CHO1-Z-0800480
100022014-09-01 00:00:00.000WRK1-Z-0800480
110022014-09-02 00:00:00.000BH1-Z-0800480
120022014-09-02 00:00:00.000CHO1-Z-0800600
130022014-09-02 00:00:00.000OT11-Z-0800120
140022014-09-02 00:00:00.000WRK1-Z-0800600
150012014-09-02 00:00:00.000BH1-Z-1280480
160012014-09-02 00:00:00.000CHO1-Z-1280480
What I want to do is update the table so that it populates the PERCENTAGE column on an empref/hrscode/date basis based on the sum of the WRK hours per day and empref.
EG for 2014-09-01 for empref 001 the result would be
Code:
0012014-09-01 00:00:00.000BH1-Z-12837.037180
0012014-09-01 00:00:00.000BH1-Z-99961.728300
0012014-09-01 00:00:00.000CHO1-Z-12837.037180
0012014-09-01 00:00:00.000CHO1-Z-99962.963306
0012014-09-01 00:00:00.000OT11-Z-9991.2356
0012014-09-01 00:00:00.000WRK1-Z-12837.037180
0012014-09-01 00:00:00.000WRK1-Z-99962.963306
IE Sum WRK = 486 so 180 is 37.037 percentage. Each HRSCODE hours total should total 100% (37.037 + 61.728)
I can write a query to do this individually but how can I so this as a query for the full table.
Code:
declare @@total as float
set @@total=(select SUM(hours) from tmsuser.tmswrhrs where hrscode='worked' and empref='001' and '2014-09-01 00:00:00.000'=procdate)
update tmsuser.TMSWRHRS set PTAS1=(Str(((hours/@@TOTAL*100)),12,3)) where empref='001' and '2014-09-01 00:00:00.000'=procdate
I have the following table
10012014-09-01 00:00:00.000BH1-Z-1280180
20012014-09-01 00:00:00.000BH1-Z-9990300
30012014-09-01 00:00:00.000CHO1-Z-1280180
40012014-09-01 00:00:00.000CHO1-Z-9990306
50012014-09-01 00:00:00.000OT11-Z-99906
[Code] ....
What I want to do is update the table so that it populates the PERCENTAGE column on an empref/hrscode/date basis based on the sum of the WRK hours per day and empref.
EG for 2014-09-01 for empref 001 the result would be
0012014-09-01 00:00:00.000BH1-Z-12837.037180
0012014-09-01 00:00:00.000BH1-Z-99961.728300
0012014-09-01 00:00:00.000CHO1-Z-12837.037180
0012014-09-01 00:00:00.000CHO1-Z-99962.963306
0012014-09-01 00:00:00.000OT11-Z-9991.2356
0012014-09-01 00:00:00.000WRK1-Z-12837.037180
0012014-09-01 00:00:00.000WRK1-Z-99962.963306
IE Sum WRK = 486 so 180 is 37.037 percentage. Each HRSCODE hours total should total 100% (37.037 + 61.728)
I can write a query to do this individually but how can I so this as a query for the full table.
declare @@total as float
set @@total=(select SUM(hours) from tmsuser.tmswrhrs where hrscode='worked' and empref='001' and '2014-09-01 00:00:00.000'=procdate)
update tmsuser.TMSWRHRS set PTAS1=(Str(((hours/@@TOTAL*100)),12,3)) where empref='001' and '2014-09-01 00:00:00.000'=procdate
writing the query for the following, I need to collapse the continuity. If the termdate for an ID is one day less than the effdate of the next id (for the same ID) i need to collapse the records. See below example .....how should i write the query which will give me the desired output. i.e., get min(effdate) and max(termdate) if termdate is one day less than the effdate of next record.
ID effdate termdate
556868 1999-01-01 1999-06-30
556868 1999-07-01 1999-10-31
556869 2002-10-01 2004-01-31
556872 1999-02-01 2000-08-31
556872 2000-11-01 2004-01-31
556872 2004-02-01 2004-02-29
output should be ......
ID effdate termdate
556868 1999-01-01 1999-10-31
556869 2002-10-01 2004-01-31
556872 1999-02-01 2000-08-31
556872 2000-11-01 2004-02-29
Here is the access query
SELECT tbl1.evenID, Sum(IIf(IsNull([evpeDateCompleted]),0,1)) AS Completions, Count(tbl2.evpeID) AS Attendees, IIf(Count([evpeID])=0,"No Bookings",IIf(Count([evpeID])=Sum(IIf(IsNull([evpeDateCompleted]),0,1)),"Closed",IIf(Sum(IIf(IsNull([evpeDateCompleted]),0,1))>0,"Closing","In Progress"))) AS Status
FROM tbl1 LEFT JOIN tbl2 ON tbl1.evenID=tbl2.evpeEvenID
GROUP BY tbl1.evenID;
coding is my passion
I want to create a filtered view according to some information provides.
for example I want to create in form 2 check boxes male and female and when either both or one of them is unchecked, the query filters out the unchecked content from view according to the other filtering conditions.
the exact thing I need is:
a text box for string looking (in a specific column).
male & female checkboxes.
two datetime textboxes to specify a range to focus in.
it is very important to me, so if you misunderstood my question, please contact me.
Hi ,
I have a question for all , please help me out.
the question is : i have a query in Oracle like this
select count(*), to_char(ISL_FIRST_VISIT, 'Day, mm/dd/yyyy') from ISL_USERS
group by to_char(ISL_FIRST_VISIT, 'Day, mm/dd/yyyy')
order by to_char(ISL_FIRST_VISIT, 'Day, mm/dd/yyyy');
i want to convert this into SQLserver but in SQL server equlent function for TO_CHAR is Datename ..when i have given this i am getting error . please give me the tip on this issue .
thanks
shekhar
--------------------------------------------------------------------------------
|
I need a little help here..I want to transfer ONLY new records AND update any modified recordsfrom Oracle into SQL Server using DTS. How should I go about it?a) how do I use global variable to get max date.Where and what DTS task should I use to complete the job? Data DrivenQuery? Transform data task? How ? can u give me samples. Perhaps youcan email me the Demo Package as well.b) so far, what I did was,- I have datemodified field in my Oracle table so that I can comparewith datelastrun of my DTS package to get new records- records in Oracle having datemodified >Max(datelastrun), and transferto SQL Server table.Now, I am stuck as to where should I proceed - how can I transfer theserecords?Hope u can give me some lights. Thank you in advance.
View 2 Replies View RelatedHello AllI am using SQL server 2000 as the backend of my application but don'twant my clients tobe able to view or edit the database tables, storedprocedures , view etc using enterprise manager or query analyser (orsimilar tools)How can this be done ?I searched a lot for this but unable to get the correct answer isthere anybody to give full solution regarding this.Please relpy me as early as possible
View 2 Replies View RelatedHi! I have a table Tbl1 has to columns:
A B
_________
Ibm Me
Sony Me
Me Bob
Me Frank
I'd like to select all rows where B=ME and A=Me Thanks for the help
I have two tables and they have a foreign key relationship. It will be a 1 to Many realationship.
Table1- the primary key table has the following columns
ContentID - int identity field
DateAdded- datetime
Table2 - The foreign key table, has the following relevant fields
FK - int foreign key
version - int
When an initial record is added there is a record added to each table. The ContentID in Table1 will match the FK field in Table2. Then a user will be able to "edit" the record in Table2, but instead of writing over the record that is already there, a new record will be added to Table2. I would like to calculate the version field where each time a record is added for the particular ContentID/FK it adds 1 to the last version that was added to that particular ContentID/FK.
Does that make sense. I am trying to implement some type of revision tracking for my CMS that I am building and this is the only way I can come up with because my client is worried that somebody will go in and make incorrect changes to their site and they want to be able to roll it back to a previous version.
I would appreciate any ideas.
Thanks,
laura
Hello
I want to delete my record after ten days of the Posted date(field)..how do I do it? I'm able to insert date(short date , long time) to the database. I'm using sql server and C#. this is what I have so far.I would appreciate your help..
Thanks!!!<%@ Page Language="C#"%>
<%@ Import Namespace="System.Data.SqlClient" %>
<script runat=server>
void Page_Load(Object sender , EventArgs e)
{
SqlConnection conPubs;
string strDelete;
SqlCommand cmdDelete;
conPubs = new SqlConnection( @"Server=localhost;Integrated Security=SSPI;database=Book" );
strDelete = "Delete tblbook Where Posted_Date =???????????";
cmdDelete = new SqlCommand( strDelete, conPubs );
conPubs.Open();
cmdDelete.ExecuteNonQuery();
conPubs.Close();
Response.Write("Records Deleted!");
}
</script>
//
</script>
<html>
<head>
</head>
<body>
<form runat="server">
<!-- Insert content here -->
</form>
</body>
</html>
I am trying to create a report where the rows of the database have fields containing customer names and dates associated with the names. I want to know for each customer how many records the customer has for specified date ranges.
SELECT [DL].[Customer], Count([DL].[Date Received]) AS [CountOfDate Received1]
FROM [DL]
WHERE ((([DL].[Date Received]) Between #12/31/2012# And #1/1/2014#))
GROUP BY [DL].[Customer];
The idea is a list of the number of records for each customer in 2013.
Ultimately my goal is to show the customer activity over multiple years.
So,
Customer Name 201120122013
Customer A123
Customer B246
Customer C543
I am trying to go down the path of a Union:
SELECT [DL].[Customer], Count([DL].[Date Received]) AS [CountOfDate 2013]
FROM [DL]
WHERE ((([DL].[Date Received]) Between #12/31/2012# And #1/1/2014#))
GROUP BY [DL].[Customer]
[Code] ....
This returns 2 columns only not the four I am looking for.
I have a set of records that will always be the same. A template if you wanna call it that.
"SELECT ID, Field1, Field2, Field3, Field4, Field5, Field6, Field7 FROM TABLE WHERE Field2 = 000"
This returns a 20 record set. The user will click a button and create another set of 20 records, where they can make changes accordingly.
I'm trying to select records that occur more than once. I'm trying to base this on the email column. So basically I want the query to look something like this:
select * from table where emailaddress count > 1
Can someone provide me with the correct syntax? :)
I have a table that has a DateTime column which uses a DataTimedatatype. How do I retrieve a range of records based on the month andyear using ms sql?Eugene Anthony*** Sent via Developersdex http://www.developersdex.com ***
View 4 Replies View RelatedNewbie alrt...
I am trying to create an asp page that will update an Access 2000 database. I need to update records if the user exists and create a new record if the user does not exist. Most of the variables are pulled from a separate "post" form.
I am using 2 pieces of info to find duplicates, as employee numbers can be assigned to multiple employees. Right now I have the page check for a duplicate employee id number then check for a duplicate last name. Unfortunately it is running each check separately, so if the last name is duplicated anywhere, it is sending a duplicated value.
here is the chunk of code in question... all RF_variables are request.form variables
cnt="SELECT COUNT(emp_id) AS Xnum FROM " & RF_course
cnt=cnt & " WHERE emp_id='" & RF_emp_id & "'"
set again=conn.Execute(cnt)
dup=again("Xnum")
if dup>=1 then
cnt="SELECT COUNT(lname) AS Xnum FROM " & RF_course
cnt=cnt & " WHERE lname='" & RF_lname & "'"
set again=conn.Execute(cnt)
dupl=again("Xnum")
if dupl=1 then
upd="UPDATE " & RF_course & " SET "
upd=upd & "section" & RF_section & "='" & RF_score & "'"
upd=upd & " WHERE emp_id='" & RF_emp_id & "'"
upd=upd & " AND lname='" & RF_lname & "'"
on error resume next
conn.Execute upd
else
ins="INSERT INTO " & RF_course
ins=ins & " (lname,fname,emp_id,cname,"
ins=ins & "section" & RF_section & ")"
ins=ins & " VALUES "
ins=ins & "('" & RF_lname & "',"
ins=ins & "'" & RF_fname & "',"
ins=ins & "'" & RF_emp_id & "',"
ins=ins & "'" & RF_cname & "',"
ins=ins & "'" & RF_score & "')"
on error resume next
conn.Execute ins
end if
else
ins="INSERT INTO " & RF_course
ins=ins & " (lname,fname,emp_id,cname,"
ins=ins & "section" & RF_section & ")"
ins=ins & " VALUES "
ins=ins & "('" & RF_lname & "',"
ins=ins & "'" & RF_fname & "',"
ins=ins & "'" & RF_emp_id & "',"
ins=ins & "'" & RF_cname & "',"
ins=ins & "'" & RF_score & "')"
on error resume next
conn.Execute ins
end if
Hopefully this is understandable.
If anyone can offer any help I would greatly appreciate it.
Thanks
I have a spreadsheet that we download from one of our customers that contains Sales Order Release information. The spreadsheets contains 1-n releases per part #.
I have a SQL 2000 view that groups this information into a smaller table (after importing into SQL).
I need to take this view and create 1-n release records based on our production run qty and put it in a new table. I have a field in my view that contains the desired # of records to create.
Since I never used TSQL to loop through table/view, how do I do this. Following is what the output should look like:
From SQL view
---------------------------------------
Part #: 11124A1
Qty Due:175
Run Qty: 50
# Release to Generate: 4
Output to Table
----------------------
Part # QtyDue RunQty
----------------------------------------------------
11124A1 50 50
11124A1 50 50
11124A1 50 50
11124A1 25 50
Note QtyDue is the production run qty, with the last record containing the remaining QtyDue from view's Qty Due
I have a table of Sales Order Releases. Following is what the table looks like:
SMIPartNo
QtyType
PO
POLine
QtyDue
UOM
DateDue
DateDueType
fsono
fcustno
finumber
frelease
fspq
JI-117933A1
Firm
N40136001
234
200
EA
7/2/2007 0:00
SH Ship Date
E00001
20
001
1
1800
JI-117933A1
Firm
N40136001
234
400
EA
7/9/2007 0:00
SH Ship Date
E00001
20
001
2
1800
JI-117933A1
Firm
N40136001
234
400
EA
7/30/2007 0:00
SH Ship Date
E00001
20
001
3
1800
JI-117933A1
Firm
N40136001
234
400
EA
8/6/2007 0:00
SH Ship Date
E00001
20
001
4
1800
JI-117933A1
Raw Material
N40136001
234
400
EA
8/13/2007 0:00
SH Ship Date
E00001
20
001
5
1800
JI-117933A1
Raw Material
N40136001
234
200
EA
8/20/2007 0:00
SH Ship Date
E00001
20
001
6
1800
JI-117933A1
Raw Material
N40136001
234
400
EA
8/24/2007 0:00
SH Ship Date
E00001
20
001
7
1800
JI-117933A1
Raw Material
N40136001
234
200
EA
9/3/2007 0:00
SH Ship Date
E00001
20
001
8
1800
JI-117933A1
Raw Material
N40136001
234
400
EA
9/10/2007 0:00
SH Ship Date
E00001
20
001
9
1800
JI-117933A1
Raw Material
N40136001
234
400
EA
9/17/2007 0:00
SH Ship Date
E00001
20
001
10
1800
See 2nd post for rest of question
My SQL is very basic. How do I create a query that will accept a parameter, an integer, and based on the integer, locate all the matches in a db?
SELECT COUNT(*) AS Expr1, tblArticle.ArticleIDFROM tblArticle INNER JOIN tblArticleCategory ON tblArticle.ArticleCatID = tblArticleCategory.ACategoryIDGROUP BY tblArticle.ArticleID
This isn't setting up the query to request a parameter.What am I doing wrong here? I"m trying to get the total number of articles for a particular category ID.
I am having a table where i have the following columns where the date format is dd/mm/yyyy
Purchase Description From_Date To_Date------------------------------- --------------- ----------------Desktop 2/2/2007 2/3/2007Mouse 2/1/2007 28/1/2007Laptop 5/1/2008 15/3/2008Speaker 4/1/2008 21/1/2008
My requirement is i need to create a stored procedure which will look for the from_date and to_date values. If the difference is more than 30 days that record should get deleted automatically. How to write the stored procedure?
Please provide me with full stored procedure
Thanx in advance
I'm storing records that contain a date/time data type. I am needing two links on a reports page (asp), the first should return all records for the current month and the second link should return all records for the last three months (including current month). I have no idea how to just sort by month.
I'm also not sure what to include here in this post to help you answer my question. On the form that is submitted initially the text field is named "txtSubmitDate" and in the database it's stored in a field called "submitdate" and is 8 characters in length.
I've tried:
'SELECT TODAY'S MONTH
SqlJunk = "SELECT * FROM eom WHERE MONTH(submitdate) = MONTH(GETDATE())-1"
'SELECT TODAY'S MONTH and the last 2 months
SqlJunk2 = "SELECT * FROM eom WHERE MONTH(submitdate) = MONTH(GETDATE()) OR MONTH(submitdate) = MONTH(GETDATE())-1 OR MONTH(submitdate) = MONTH(GETDATE())-2 ORDER BY submitdate ASC"
These are not working because it can't handle the change in year (going from january 2005 back to december 2004, etc).
Any ideas?
How can I pull out duplicate records based on certain fields?
Table called Bank
I want to pull out records that have duplicate inv_no, cus_no, amount,ordernum
Not all the fields are the same in each record. But I want the records that have these fields that are the same.
I am having a table where i have the following columns where the date format is dd/mm/yyyy
Purchase DescriptionFrom_DateTo_Date
------------------------- --------
Desktop2/2/20072/3/2007
Mouse2/1/200728/1/2007
Laptop5/1/200815/3/2008
Speaker4/1/200821/1/2008
My requirement is i need to create a stored procedure which will look for the from_date and to_date values. If the difference is more than 30 days that record should get deleted automatically. How to write the stored procedure?
Please provide me with full stored procedure
Thanx in advance
C.R.P RAJAN
I have a question about SQL Server.
Table patient:
create table patient (pn int,code int,date date,doctorcode int)
insert into patient (pn,code,date,doctorcode)
values
(1,10,'2015-02-19','100),
(1,10,'2015-02-19','101),
(1,10,'2015-02-19','102),
[Code] ...
Table Patientref:
create table patientref
(pn int,code int, sdate date,edate date,status int)
insert into patientref(pn,code,sdate,edate,status)
values
(1,10,'2015-02-13','2015-02-19',1),
(1,10,'2015-02-19','2015-03-24',2),
[Code] ...
Here we need consider patient dates that fall between sdate and edate of the patientrefs table, and then we need to consider the highest status values in order (for example, the highest values in order - 2 is first highest, 4 is second highest, 3 is third highest, and 1 is fourth highest value)
If the date falls between multiple different sdate and edate with the same status values, then we need to consider the latest sdate value and from that entire record we need to extract that value.
Examples: patient
pn | code | date | doctorcode
2 | 10 |2015-02-12 | 101
2 | 10 |2015-02-13 | 102
2 | 10 |2015-02-14 | 103
Table : Patientref:
pn | code | sdate | edate | Status
2 | 10 |2015-02-08 | 2015-02-19 | 4
2 | 10 |2015-02-09 | 2015-02-19 | 2
2 | 10 |2015-02-10 | 2015-02-19 | 2
2 | 10 |2015-02-11 | 2015-02-18 | 1
Here, pn=2 values have dates which fall between sdate and edate of patientref table. Then we give highest values status is 2, and status 2 values have two records, then we go for max sdate(latest sdate). Then this pn=2 latest sdates is 2015-02-10 and we need to retrieve the corresponding edate and status values.
pn = 4donot have sdate and edate and status values dut not fall conditon
Based on this, the desired output is below:
pn | code | date | doctorcode | sdate |edate |status
1 | 10 |2015-02-19 | 100 |2015-02-19 |2015-03-24 | 2
1 | 10 |2015-02-19 | 101 |2015-02-19 |2015-03-24 | 2
1 | 10 |2015-02-19 | 102 |2015-02-19 |2015-03-24 | 2
2 | 10 |2015-02-12 | 101 |2015-02-10 |2015-02-19 | 2
[Code] ...
I tried it like this:
select p.pn,p.code,p.[date],p.doctorcode,pr.sdate,pr.edate,pr.[status] from patient p
outer apply (select top 1 pr.pn,pr.code,pr.sdate,pr.edate,pr.[status] from patientref pr
where pr.pn=p.pn and pr.code=p.code and p.date between pr.sdate and pr.edate
order by case when pr.status=2
then 1 when pr.status=4 then 2
when pr.status=3 then 3
when pr.status=1 then 4 end ,pr.sdate
)pr
but this query not given expected result.here when dos not fall between sdate and edate that records not given in the above query. I required that records also.if not fall b/w condition then we need retrive that records empty values for that records.
There are two seperate jobs,Job A and Job B, which run and insert records in a table. Job A runs first and then Job B runs. The task is to overwrite Job B records if Job A and Job B have same
PID,EDate,CP,RelativePNum,XrefCode,CPD
PID,EDate,CP,RelativePNum,XrefCode,CPD
In the above screenshot, row 1 and row 2 have same
So i want to write a query which deletes row 2 records, and keep row 1,row 3 and row 4 records. This i want to do in the whole table.
create
table AB
(
PID
int,
tTimeStamp
datetime,
EDate
varchar(40),
[Code] ....
I need to list all the records in Table2 which don't have matching field values in Table1.
This the the exact opposite of what I need:
SELECT DISTINCT
Field1,
Field2,
Field3,
Field4,
Field5
FROM
[Table1]
WHERE EXISTS(
SELECT DISTINCT
FieldA,
FieldB,
FieldC,
FieldD,
FieldE
FROM
[Table2]
)
The above seems to give me all records in Table1 in which the five fields match the five fields specified in Table2. What does not show up is the test record I put in Table2 which is not in Table1.
What I need, however, is the exact opposite.
I tried the above using NOT EXISTS but I get no records at all.
How do do this?
I have a set of revenue records where there is a UNIT column and a REVCHARGE column. What I need to do is breakout the records into single records where the unit count is > 1 and calc the actual charge:
Ex:
Units REVCHG FIELD_A FIELD_B .....
3 3.00 ABCD EFGH
Needs to be converted to:
Units REVCHG FIELD_A FIELD_B .....
1 1.00 ABCD EFGH
1 1.00 ABCD EFGH
1 1.00 ABCD EFGH
The calc is obvious but how can I do this with a cursor but would like to do it without a cursor if possible? Anybody got an idea?
Thanks.
I have a MS SQL table with a derived column, for date the records were imported, and need to delete records, based on the content of this column. What I need to do is delete all records from the table with a date of '2011-11-18'. Now this column is a datetime column, so it contains the time info after the date, i.e. 2011-11-18 09:29:38.000, but no matter what command I try for this:
-Delete from table where Date_Imported like '2011-11-18%'
-Delete from table where Date_Imported like '2011-11-18'
-Delete from table where Date_Imported = 2011-11-18
It comes back saying "0 rows affected", even though I know there are records with that date in the table.
So let's say I have a table Orders with columns: Order# and ReceiptDate. Order#'s may be duplicated (Could have same Order# with different ReceiptDate). I want to select Order#'s that go back 6 months from the last ReceiptDate for each Order#.
I can't just do something like:
SELECT *
FROM Orders
WHERE ReceiptDate >= add_months(date,-6)
because there could be Order#'s whose last ReceiptDate was earlier than 6 months ago. I want to capture all of the instances of each Order# going back 6 months from each last ReceiptDate relative to each Order#.
I have zip code database and i am trying to get the records based on 100/80/60/40 miles radius. Below the sample structure of my table
Create table ZipCodes(ID bigint primary key identity(1,1),ZipCode varchar(10),
Address varchar(4000), city varchar(50),state varchar(50),Latitude float,Longitude float)If i pass the Zipcode as '10021'
I need to get zipcodes and other details of my table which is 20 mile radius circle.
I Google through and got couple of article explains about using Haversine Formula. Also, following link has a function to calculate the distance.
I am trying to select records based on a year.
DECLARE @Date
SET @Date = 2012
DECLARE @Year int
SET @Year = (SELECT DATEPART(yyyy,@Date))
SELECT @Year AS Year
--SELECT *
-- FROM [Orders].[dbo].[Orders] od
-- WHERE .Orderl_Date < @Date;
----WHERE DATEPART(yyyy,@Date)= @Year
----WHERE DATEPART(yyyy,od.Order_Date)= @ArchiveYear
DECLARE @Date
SET @Date = 2012
DECLARE @Year int
SET @Year = (SELECT DATEPART(yyyy,@Date))
SELECT @Year AS Year
--SELECT *
-- FROM [Orders].[dbo].[Orders] od
-- WHERE .Orderl_Date < @Date;
----WHERE DATEPART(yyyy,@Date)= @Year
----WHERE DATEPART(yyyy,od.Order_Date)= @ArchiveYear