I Have A Flat File With 500.000 Rows But It Only Loads 249999
Nov 27, 2007
Hi,
In a dataflow there is a Flat File Source that loads a file with 500000 rows but when I execute the package it only loads 249999, I have verified the file and every looks fine, it is a csv and ms-excel recognized it perfectly.
I'm wondering if there is any technical limitation regarding to the amount of rows per file?
and what else can I verify for discover the problem?
I have rows in a table in a SQL Server 2005 that I want to send to a Flat file. When I am executing the task for the first time it is OK and works perfectly. But the problem is when I am trying to do it again. I seems like the path to the file and the filename dissappears after the first time and the execution failes with an error message that tells me that the file is invalid and dont exists.
I dont now why this is happening and its such an easy thing to do and I cant make it work.
I have a text file that come from our client that is Column deliminated by ~ and row deliminated by {CR}{LF}. There is a comment field that appearently is not cleaned up and has {CR}{LF} within the comment field.
I am new to SSIS and I'm wondering if there is a way to detect and correct the bad rows?
example file formet:
ORDERID~DATE~Comment~Address 1~2/3/2007~Some Comment~1234 oak st 2~2/3/2007~Some messed up comment~345 oak st. 3~2/3/2007~Another comment~3214 asdf blvd.
I noticed something strange today. I created a pkg that reads a flat file and writes the rows to a table.
In checking the data in the file against what's in the table, I noticed that the rows were inserted in a different order than they are in the file.
All the rows appear to be in the table correctly, but they're just not in the same order as in the file. I've never seen this before. But I checked very carefully, and this is indeed the case.
Is there a way (perhaps a property) to capture the number of rows selected from a Flat File Data Flow Source without having to develop a script to loop through the rows and count them?
I finally put together a SSIS package that takes a Text File and successfully imports its data into the right table. My question is, where in the package's properties can I find the option to Delete all rows from Destination Columns prior to Importing. I have looked everywhere in the Package Explorer for this setting. Thanx in advance.
I tried to load a fixed width flat file with around 300,000 rows. However, only the first 8xxxx rows were loaded to the destineation table and the rest row were loading blank records. There was no error message showing during package execution. I've tried to split the file in half and the result was the same. So it wasn't the data file problem.
Would there be any buffering issue I need to cater for inside the package? Thanks!
Sorry if this question had already been answered previously. I was unable search the forum on this topic. How will I merge these and then configure the first row as Column names (As this helps to map to the destination column names automatically)
I have a data task with the following requirements: 1) Run query against database to retrieve rows 2) Add header and footer row to the result set. The footer row must contain a count of the records. 3) Write the rows to a fixed width file if there were any data rows
I have got to the point that I can create the file (using a set of tasks that includes derived columns, sorts, aggregation and merges). However the file is created regardless of whether there were data rows returned. I can't check the row count before proceeding as this isn't set until the data task ends. And if I try to split them into separate data tasks (so that I can access this variable and perform conditional execution) it becomes harder to access the original rows.
Do you have any recommendations on the best way to achieve this? It all seems to be very complex and I'm starting to feel that it would be easier to do this outside of SSIS... Please help me to keep the faith!
For those interested this is a slightly simplified version of what I have so far (all within a single data task):
1.Run dummy sql to create header row 2.Run main SQL to retrieve rows | | | 3.Multicast | | | | | 4.Create footer row by doing sum() in aggregate task | | | | 5.Merge body and footer | | 6. Merge header with body and footer |
Just attempting to import a simple tab delimited text file into my SQL Server 2005 database using the SQL Server Import and Export wizard. Column names are specified within the first line of the file. The Header Rows to Skip field value is listed as 0, but the wizard indicates that "The field, Header rows to skip, does not contain a valid numeric value".
Why isn't zero (0) a valid numeric value? I don't want to skip any rows. PLUS, I get the same error when trying to export to a text file although the header rows to skip field does not exist. I can increase the number to 1 or more, but the wizard will skip part of my data .. unacceptable.
What am I missing here? I installed SP1 of SQL server 2005, but that did not help.
All, I'm having an issue with the Flat File Data Flow Source returning only a limited set of the rows that are in the flat file. Basically, I connect to the flat file fine, it goes to retrieve the data (tab delimited file) and only returns 190 of 392 rows. Is there a limitation on the # of rows this data flow source can retrieve or something? I've look all through the settings and properties of the task as well as the connection manager and nothing is obvious as to what is causing this. Hopefully someone ou tthere has run into this before and can help me retrieve all rows. Thanks in advance!
I have a flat file.I am trying to set the value for the property "HeaderRowsToSkip" during runtime.I have set an expression for this in my "flat file connection manager". But this is not working.The connection manager is not able to take the value during runtime.
My expression is as follows:
DataRowsToSkip : @[user:: Var]
where "Var" is my variable which gets the value from the rowcount component and trying to set it back to the "HeaderRowsToskip" property.
I ve even tried setting the value to the "HeaderRowsToSkip" property in the expression builder.
I am testing SSIS and have created a Flat File Destination. I defined the Flat File Connection as New for the first time and it worked fine. Now, I would like to go back and modify the Flat File Connection in the Flat File Destination Editor, but it allows only to create a New connection rather allowing me to edit the existing one. For testing, I can go back and create a new connection, but if my connection had 50-100 columns then it would be an issue to re-create it from scratch.
I have a package that reads a table that has a list of files that I need to load into a table that arrive every night. These files range from 50mb to 1.5gb, The entire process to load and transform is taking about 50mins, which is about a 300% increase from our current production environment. However I am looking at ways to improve performance by loading all of the data into the staging table at the same time.
Is this possible, and do you guys think it would improve performance significantly?
I have a situation where a tab limited text file is used to populate a sql server table.
The tab limited text file comes from a third party vendor. There are fixed number of columns we need to export to the sql server table. However the third party may add colums in the text file. Whenenver the text file has an added column (which we dont need to import) the build fails since the flat file connection manager does not create the metadata for it again. The problem goes away where I press the button "Reset Columns" since it builds the metadata then. Since we need to build the tables everyday we cannot automate it using SSIS because the metadata does not change automatically. Is there a way out in SSIS?
I am transferring data from an OLEDB source to a Flat File Destination and I want the column width for all of the output columns to 30 (max width amongst the columns selected), but that is not refected in the Fixed Width Flat File that got created. The outputcolumnwidth seems to be the same as the inputcolumnwidth. Is there any other setting that I am possibly missing or is this a possible defect?
I am trying to load a text file into a temporary table in MS-SQL using DTS.
The file is coming from a unix machine and contains comma-delimited entries.
the DTS script runs every minute and the transformation maps values in the text file into corresponding columns in the temp table.
The problem is that the sequence of the entries in the text file does not match the sequence of the values imported.
I have several instances of this script (all identical) but only one file seems to be out of whack. Does anyone know what could be causing this? This is for a real-time trading system so the sequence has to be perfect.
I m using SSIS and i am transfering the data from Flat File Source to the OLE DB destination File. The source file contain some corrupt data which i am transfering to the other Flat file destination file.
Debugging is succesful but i am not getting any error output in the Flat file destination file.
i had done exactly which is written in the msdn tutorial of SSIS.
Plz tell me why i am not getting the error output in the destination flat file?
First, a couple of important bits of information. Until last week, I had never touched SISS, and therefore, I know very little about it. I just never had the need to use it...until now. I was able to convert my first 3 flat files to SQL2005 tables by right clicking on "SISS Package" and choosing "SISS Import and Export Wizard". That is the extent of my knowledge! So please, please, please be patient with me and be as descriptive as possible.
I thought I could attach some sample files to this post, but it doesn't look like I can. I'll just paste the information below in two separate code boxes. The first code box is the flat file specifications and the second one is a sample single line flat file similar to what I'm dealing with (the real flat file is over 2 gigs).
My questions are below the sample files.
Code Snippet Record Length 400
Positions Length FieldName
Record Type 01 1,2 L=2 Record Type (Always "01") 3,12 L=10 Site Name 13,19 L=7 Account Number 20,29 L=10 Sub Account 30,35 L=6 Balance 36,37 L=1 Active 37,41 L=5 Filler Record Type 02 1,2 L=2 Record Type (Always "02") 3,4 L=2 State 5,30 L=26 Address 31,41 L=11 Filler Record Type 03 1,2 L=2 Record Type (Always "03") 3,6 L=4 Coder 7,20 L=14 Locator ID 21,22 L=2 Age 23,41 L=19 Filler Record Type 04 1,2 L=2 Record Type (Always "04") 3,9 L=7 Process 10,19 L=10 Client 20,26 L=6 DOB 26,41 L=16 Filler Record Type 05 1,2 L=2 Record Type (Always "05") 3,16 L=14 Guarantor 17,22 L=6 Guar Account 23,23 L=1 Active Guar **There can be multiple 05 records, one for each Guarantor on the account**
and the single line flat file...
Code Snippet 01Site1 12345 0000098765 Y 02NY1155 12th Street 03ELL 0522071678 29 04TestingSmith,Paul071678 05Smith, Jane 445978N 05Smith, Julie 445989N 05Smith, Jenny 445915N 01Site2 12346 0000098766 N 02MN615 Woodland Ct 04InfoJones,Chris 012001 01Site3 12347 0000098767 Y 02IN89 Jade Street 03OWB 6429051282 25 04Screen New,Katie 879500
As you can see, each entry could have any number of records and multiples of some of the record types, with one exception, every entry must have a "01" record and can only have one "01" record. Oh, and each record has a length of 400.
I need to get this information into a SQL 2005 database so I can create a front end for accessing the data. Originally, I wanted one line for each account and have null values listed for entries that don't have a specific record. Now that I've looked at the data again, that doesn't look like a good idea. I think a better way to do it would be to create 5 different tables, one for each record type. However, records 2 through 5 don't have anything I can make a primary key. So here are my questions...
Is it possible to make 5 tables from this one file, one table for each of the record types?
If so, can I copy the Account number in record 01, position 13-19 in each of the subsequent record types (that way I could link the tables as needed)?
Can this be done using the SISS Import and Export Wizard to create the package? If not, I'm going to need some very basic step by step instructions on how to create the package.
Is SISS the best way to do this conversion or is there another program that would be better to use? I know this is a huge question and I appreciate the help of anyone who boldly decides to help me! Thank you in advance and I welcome anyone's suggestions!
How can I take this example Flat file and parse out each section to a new flat file? Each section starts with HD (header row)
http://www.webfound.net/flat_file_example.txt
e.g. an example output file based on above (cutting out the first section) would be:
http://www.webfound.net/flatfile_output.txt
Also, I'll need to grab a certain value in each header row (certain position in the 100 byte header row) to use that as part of the filename that's outputed. I assume it would be better to insert these rows into a temp table then somehow do a search on a specific position in the row...but that's impossible? The other route is to insert each row into a temp table separated out by fields but that is going to be too combursome because we have several formats to determine separation of fields based on the row type so I'd have to create many temp tables and many components in SSIS when all we want to do is again:
1) output each group (broken by each header row) into it's own txt file
2) use a field in the header row as part of the name of the output txt file (e.g. look at the first row, whcih is a header row in flat_file_example. txt. I want to grab the text 'AR10' and use that as part of the filename that I create
Any suggestions on how to approach this whole process in SSIS...the simplest approach that will work ?
I have a package in which there are only one Data flow Task and it has only three components. 1) Source , which is a SQL db 2) destination and 3) OLE DB Destination flat file Error output file. I want the error file to be created ONLY if there is any error while dumping the data into destination DB. But , the issue is, the error flat file is being created inspite of No error while dumping the data from Source to Destination.
Need to know how I can get the dynamic filename created in the FlatFile destination for insert into a package audit table?
Scenario: Have created a package that successfully outputs Dynamiclly named flat files { Format: C:Test’Comms_File_’ + ‘User::FileNumber’+’_’+Date +’.txt’
E.g.: Comms_File_1_20150724.txt, Comms_File_2_20150724.txt etc} using Foreach Loop Container :
* Enumerator Set to: “Foreach ADO Enumerator” with the ADO object source variable selected to identify how many total loop iterations there are i.e. Let’s say 4 thus 4 files to be created
*Variable Mappings : added the User::FileNumber – indicates which file number current loop iteration is i.e. 1,2,3,4
For the DataFlow task have a OLDBSource and a FlatFile Destination where Flat File ConnectionString is set up as:
I need find out the number of columns in flat file before i process that particular file.I have file name in @filename variable and file path is @filepath variable.But do not not that how i will check the column name in before i will process that file.
@filePath = C:DatabaseSourceFilesCAHCVSSourceFiles And i am using for each loop container to read the file one by one and put the file name in @filename variable.and my file name like
Now what i have to do is i need to make sure that ID,Name,City,County,Phone is there in flat file.if it is not there then i have to send mail to client saying that file is not valid.I need to also calculate the size of flat file.
What is the easiest way to accomplish this task with SSIS?
Basically I have a stored procedure that unions multiple queries between databases. I need to be able to export this to a text file on a daily basis and add a total records: row to the end of the text file.
Hello Experts, I am createing one task (user control) in SSIS. I have property grid in my GUI and 2 buttons (OK & Cancle). PropertyGrid has Properties like SourceConnection, OutputConnection etc....right now I am able to populate Connections in list box next to Source and Output Property.
Now my question to you guys is depending on Source Connection it should read that text file associated with connection manager. After validation it should pick header (first line of text file bases on record type) and write it into new file when task is executed. I have following code for your reference. Please let me know I am going in right direction or not.. What should go here ? ->Under Class A
In a foreachloop, I am inserting records into a flat file which is working fine. But the thing is that as the file grows, it takes longer for it to locate the EOF(End of File) of the flat file so as to insert the records.
I have around 70-100 lines written to the file at each loop and there are more than 20k records to be looped. wihich means that at the end I should be having 1400k - 20000k line in the text file.
One solution would be to insert the records at the start of the file itself so that it does not has to lookup the EOF each time before writting.
Another would be to generate separate files and then merge it.
Any idea how can this can be done?
Beside this I have to zip the file and then SFTP to a given address.
I am running my package in sql server 2012, in which i am giving network path for flat file destination. And its working fine. But if i give m local path, its giving me error " cannot open data file" ...
Here's a really annoying problem. Let's say you have a text file with 2 million rows.Delimiters all look good and rows are previewed well but the file has a missing row at say lin 1234567 - way deep in the file. When SSIS encounters the blank row, an error is raised and processing on the file STOPS! I verified this in by checking the SSIS log and have even developed an error routine to notify me via email when the error occurs (really cool if I do say so myself ). The main problem still remains - how to resume processing from the point of failure in the file? Any help is appreciated. Thanks.
How do I insert data from a flat file or .csv file into an existing SQL database???
Here what I've come up with thus far and I but it doesn't work. Can someone please help? Let me know if there is a better way to do this... Idealy I'd like to write straight to the sql database and skip the datset all together...