I Have Some Problem When I Connected To Informix By SSIS
Jul 16, 2007
Hi all,
I have problem when I connect to Informix by DataReader Source(SSIS)
Look for error report
Error: 0xC02090F5 at Data Flow Task, DataReader Source [1]: The component "DataReader Source" (1) was unable to process the data.
Error: 0xC0047038 at Data Flow Task, DTS.Pipeline: The PrimeOutput method on component "DataReader Source" (1) returned error code 0xC02090F5. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "SourceThread0" has exited with error code 0xC0047038.
Error: 0xC0047039 at Data Flow Task, DTS.Pipeline: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0047039.
SQL Command :
select * from hist_itenary
where book_no in (select book_no from book where updt_date_time like '2007/07/07%')
but when i use this command that not contain where statement(select * from hist_itenary ), this command has working.
We are using Informx for our transactional DB and want to be using reporting services to provide reports. We have some using ODBC directly to Informix, but need to start extracting data from Infomix and aggregating it in SS 2005.
Is anybody else doing this?
Where can I find information of how to do this? We are totally new to SSIS.
hello,everyone.i meet a problem about that the data source is informix database,the text of OLE DB connection is success,but in OLE DB source control table can not loading,why?How to settle it?
or it can say by this way,how to connect informix DB
I am transferring the data from sql server 2005 to Informix 7.3.1 SE using SSIS .
I am using the OLEDB data connection for both source as well as destination databases.
I am trying to mapping the source and destination tables .I am getting the following error.
TITLE: Microsoft Visual Studio ------------------------------ Error at Data Flow Task [OLE DB Destination [184]]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21. Error at Data Flow Task [OLE DB Destination [184]]: Opening a rowset for ""srinivas"."company"" failed. Check that the object exists in the database.
------------------------------ ADDITIONAL INFORMATION: Exception from HRESULT: 0xC02020E8 (Microsoft.SqlServer.DTSPipelineWrap) ------------------------------ BUTTONS: OK ------------------------------
I am using the following ODBC driver for the connecting INFORMIX 7.3.1 which is running on LINUX environment. Openlink Generic ODBC Driver
It's creates the table in the informix 7.3.1 but it's not mapping the source and destination databases columns.
I want to connect to an Informix Database via SSIS to read and store data. I did some search online and have downloaded Informix ODBC Drivers. I installed the drivers and am trying to configure a System DSN but have few doubts on what each field indicate. URL... I am not sure on what to enter in fields like IBM Informix Server, Service Name? Connecting to Informix DB via SSIS?
Dim delconn As New SqlConnection _ ("data source=15-46SQLEXPRESS;AttachDbFilename =C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataProjectDB.mdf; Integrated Security=True;")
this is my coding, anyone can spot an error from there?? the database can't be located somehow.... help me ,for god sake
if not Page.IsPostBack then Dim strConn As String = "server=(local);database=NORTHWND" Dim sql as string = "Select EmployeeID, FirstName, LastName from Employees" Dim conn as New SQLConnection(strConn) Dim Cmd As New SqlCommand(sql, conn) Dim objDR As SqlDataReader conn.Open()'This is where it has an error and says-- An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. The NORTHWND database is set up in the web.config fileThanks! Jon
Beginning this morning, when I look in Current Activity in our SQL 6.5 Server, all trusted user connections to my server are showing up under "SA". We are running mixed security. Most of the connections are through ODBC. We have applied SP5a to SQL. As far as I know, nothing in SQL has changed. From what others are telling me, nothing in NT or the network has changed.
Something is up. What am I missing? Where can I look?
When I try to connect to my SQL server I get the following error.
Microsoft SQL Enterprise Manager A connection could not be established to MLM1-[SQL Server] Cant allocate space for object 'Syslogs' in database 'tempdb' because the 'logsegment' segment is full. If you ran space in syslogs dump the transaction log. Otherwise use ALTER DATABASE or sp_extendsegment to increase the size of the segment.
Ok, I am not up on SQL so I'm not sure how to dump my tempdb database. I have a coworker that has only done this sort of thing in the Enterprise Manager and we can't get there. So how do I do this and make sure that I don't blow away any data? Also if I do dump my tempdb will this cure my problems and how do I avoid having this happen again?
Hello all,I have a scripts which needs the information about the database inwhich it is running.How can I find out this information.For example if I want to know the User who has satrted this report, Iuse the SYSTEM_USER procedure.Does an equal procedure exist to find out, on which database the useris connected to.RegradsFranz-Josef
Please help. I am trying to translate this to SQL 2005. This language is in Informix SQl. I do not know anything about informix. I am especaially confused with the "JOINS". Any help would be appreciated. THANKS.
FROM property, address, ppi, outer code_table state, outer code_table country, code_table prop_role WHERE property.id = ppi.property_id AND ppi.address_id = address.id {AND (property.eff_to_date IS NULL OR property.eff_to_date >= TODAY) AND (ppi.eff_to_date IS NULL OR ppi.eff_to_date >= TODAY) AND ppi.eff_from_date <= TODAY} AND state.id = address.province_state_cd AND country.id = address.country_cd AND prop_role.id = ppi.prop_role_cd AND prop_role.code_table_cd = "OWNER" AND property.pact_code <> 'PERS'
I spent the whole week trying to find a solution with a problem of authorization/access on a new website (aspnet2 + slqserver 2005)
The site was running well in the test environnement but once deployed the production site behavior was quite erractic. some clients run ok, others not and that changes for the same client with each session.
it appeared that the problem came from the access to stored procedures. sometime, theirs accesses were authorized sometime denied.
finally, tests showed that the client's userid was either aspnet or iusr_
by putting the same permissions on these 2 accounts, the problem is solved and all the clients are running fine.
now the question : for which reason the client connect randomly to one or the other of these 2 id ? is this normal ?
using vs2005 to build web pages of asp.net 2.0, The database is SQL Server 2000,.But I always fail to connect. using the following configuration in web.config: <appSettings> <add key="DSN_student" value="server=(local);uid=admin;pwd=123456;database=network_course"/> </appSettings> I also failed to connect using the following configuration in web.config: <add name="network_courseConnectionString1" connectionString="Data Source=(local);Initial Catalog=network_course;User ID=admin;Password=123456;" providerName="System.Data.SqlClient" /> I am a beginner from China and eager to get answers! Thank you!
I have just installed Windows 2000 Pro, Visual Studio 2003 Academic and , MSDE 2000. I get the little icon in the Service Tray(?) showing an empty circle partially overlaying a server symbol. It says Not Connected-VSDOTNET. If I click it and get SQL Server Service Manager and put in Server name of VSDOTNET, The drop down listbox for SERVICES is empty (no SQL Server choice) I enabled TCP/IP for this server thru SVRNETCN.DLL. I'm a newbie to pc development. Help!
Hello all,Is there a way to figure out when was the last time someone connected toa database? SQL 2000 environment.Thanks,Raziq.*** Sent via Developersdex http://www.developersdex.com ***
We have a existing backup, re-index job that runs at night on anexisting database that is now accessed by web users 24/7.Problem is that one of the steps is to kill all users before backupstarts so it kills any transactions that are happening at that timequestion is... Can users be connected during a backup? Will removingthe kill users step slow the backup alot?any other suggestions would be appreciated.thanks
sorry about asking basic question, just slipped out of my mind, how to get the list of currently connected users on one database and on whole server in sql server 2005
I have downloaded the datadirect ole db provider for informix 7.x and am need the correct sp_addlinkedserver syntax to get my sql server 7 and informix hooked up. Can anyone help?
I'm trying to hit an informix box... I've found two software packages (both priced in the THOUSANDS of dollars)... Looking for a cheap...er, a FREE way to hit this informix box via DTS.
I want to transfer data from an Informix database using DTS. What driver do I need to use for that? What are the settings for the Data Source Name? Has anyone of you accomplished DTS from Informix to SQL Server?
Let me know if you have any ideas that you can share.
My task is to convert this Informix SQl Script to SQL 2005, unfortunately I am not really familiar with Informix SQL. Below is an example script. I can figure out the "Select" statement and the "Where" statement, but the "From" statement is giving me a hard time. Any assistance would be appreciated.Thanks
WHERE property.id = prop_valuation.property_id AND property.id = legal_description.property_id AND property.eff_to_date <= TODAY AND legal_description.id = legal_lines.legal_id AND legal_lines.line_nr = 1 AND tax_code_area.id = prop_valuation.tca_id AND property.id = property_char.property_id AND property_char.prop_char_typ_code = "SIZE" AND property.id = usecd.property_id AND usecd.prop_char_typ_code = "USECD" AND usecd.value = ct.code_table_cd AND property.pact_code <> 'PERS'
I'm getting the below errors when using sql server's data import wizard. Please Note: My test connection was successful and the error occurs when I click the "Next" button after closing the properties window. For Security reasons I've filled the User Id and DataSource with a bogus account, database, and server i.e. xxxx. Notice the password is blank?... Is that normal? I'm in a jam and appreciate your help.
Thanks,
Matt
===================================
Cannot get the supported data types from the database connection "Provider=Ifxoledbc;Password=;Persist Security Info=True;User ID=xxx;Data Source=xxx@xxxx". (SQL Server Import and Export Wizard)
===================================
IErrorInfo.GetDescription failed with E_NOINTERFACE(0x80004002). IErrorInfo.GetDescription failed with E_NOINTERFACE(0x80004002). (System.Data)
------------------------------ Program Location:
at System.Data.OleDb.OleDbConnectionInternal.GetSchemaRowset(Guid schema, Object[] restrictions) at System.Data.OleDb.OleDbConnection.GetOleDbSchemaTable(Guid schema, Object[] restrictions) at Microsoft.SqlServer.Dts.DtsWizard.DataSourceInfo.LoadTypeData(OleDbConnection myDestConnection) at Microsoft.SqlServer.Dts.DtsWizard.DataSourceInfo.CacheDataSourceInfo(IDbConnection myConnection)
I need to create packages that connects to a client's Informix DB server. When I tried to create a new OLEDB datasource from configuration manager, I could not find any Informix driver option. Can someone shed some light as to what I'm missing and the steps I need to take to be able to source data from Informix? Any drivers that needs to be installed and configured on the server and the developer's machine?
Thanks in advance.
PS. I discovered from the link below that IBM's Informix OLEDB driver does not support SSIS. Can someone validate this claim and what alternatives I have?
I am having trouble using an OLE-DB source in my data flow task. I am using Informix. In the OLE DB source editor I get the following message:
Warning at {4f24a418-f95e-4185-8989-4f960aaabd68} [OLE DB Source [1]]: Cannot retrieve the column code page info from the OLE DB provider. If the component supports the "DefaultCodePage" property, the code page from that property will be used. Change the value of the property if the current string code page values are incorrect. If the component does not support the property, the code page from the component's locale ID will be used.
Using the preview button in the OLE DB source editor, it maps the integers to DT_I4 so most of the numbers in the preview convert as null and that is how they end up in the target. I added a data conversion component and they still end up in the target as null.
I have uploaded my site on localhost and sharing on intranethow can i answer these question? Q1) How many users have loggedin? and using my database?Q2) Which table has lots of load?Q3) how can i immediately close particularly connection?
I need to maintain a record such as how many time any user (e.g, sa) connects to the sql server. Means whenever any person is connecting to the database through application or directly, then i need to know that through which sql user(e.g sa), any body connected.
I need to be able to list all User connected to a particular database, after doing a bit of playing I have writen a simple view in the database to show this information which looks like
select spid, status, loginame, hostname, blocked, db_name(dbid), cmd from master..sysprocesses where db_name(dbid) = 'AutoCost2008
But my problem is that as this needs to be run from an application where the user is logged on as a standard user and therefore when this is run it only shows the current user, I am not sure what permissions I need to give this login to allow them to view all users connected to this database without giving them full Admin permissions, can anyone please help.
I'm writting an standar application in c# that comunnicates with a sql server 2005 in a mobile device. The mobile device is connected to the pc with an usb wire. In the sample I've made, I've inserted in the form main a datagridview. I go on the wizard to select the data source. I choose a Microsoft SQL Server Mobile Edition data connection. The data source is tge activesync mobile device. I create a new database in the mobile device called test.sdf. The wizard has a button to check the conecttion and it rules. A new connection appears in the server explorer. I add rows through a query. I build the solution and no problem, but when I start the debug session an sqlceexception occurs: Data Source not found. In the database connection that the project has created the connection string is: Data Source ="Mobile Device est.sdf";
I didn't write any code. I just went on the wizards. All the code has been inserted by visual studio 2005.
I have a web application that runs on IIS on Windows XP professional. I have reached the max number of connections to the IIS website. So, I tried the approach of disabling HTTP Keep-Alives.
All is fine and dandy until my Business Intelligence Studio report project attempts to set the parameters for a report using report viewer at which point I get the following error message:
"The request failed with http status 401: access denied."
How can I fix this? I have posted this over at the asp.net forums, but I figured I would check here to see if anyone else has solved this problem.
