I Need To Execute A Procedure At A Spesific Hour
Jun 30, 2006Hello, i need some help on this...
I need to make a job that execute a procedure at 7 am , and other at 8 pm, can any one give a hand with this?
Regards
ADVERTISEMENT
6 Hour Stored Procedure
Feb 15, 2007One of our programmers has a stored procedure that joins two views into a new table.
One of the views that it is grabbing is fairly complicated pulling from several tables, and can take quite awhile to run on its own. This stored procedure has been running on several databases for several months just fine.
After switching to sql server 2005 it started taking almost 6 hours in one of the databases.
As of now, it runs fine in one of the dbs in a few minutes and produces 50,000 records. The db that it takes almost 6 hours to complete produces only 17,000 records. The programmer has restricted the fields and gets it to run in under a minute - but it doesn't seem to matter which fields, just how many.
After 3 or 4 of the records from the complex view, it goes from running in 1 min, to almost 6 hours again - no in between. It is the same code as the database where it runs fine and produces more records.
Any thoughts would be greatly appreciated.
Dave
How To Find Out If A Spesific Table Has Changed?
Feb 28, 2008Hi,
I have a small question regard how to find out if a specific table has chanced.
Is there any (sql)function inside MSSQL2005 that I can use to find if a spesific table has changed? I have heard of timestamp, but I don't know if that will solve my problem? Is there any thing in the sys.tables that kan help me, just do a fast query and check if a table has changed?
I'm developing a web-application with AJAX.NET, and I have UpdatePanels with datalist. When the tables in the db gets big the application is henging for a sec or two when it receiving the data, and when the timer (refresh rate) is 2 min it is not good! So my plan is to check if the table has chanced since last transfer of data, and if it has it will download the data, if not do nothing.
Jonny
Counting Popularity, Hour By Hour
Nov 14, 2001I have a table that is recording hits to a website. Everytime someone views a page, the datetime of the hit is recorded in a field called hit_date_time. I would like to be able to come up with a query that will show how many hits occured on a given day or given days, broken down by hour.
The resulting table for two days would look something like:
Time Hits
1/1/01 12:00 1
1/1/01 1:00 23
1/1/01 2:00 54
1/2/01 1:00 15
1/2/01 2:00 14
I can't seem to figure out how to write the query so that I can take into consideration the date and hour of the event so that I can count it.
Thanks,
Eron
Execute Procedure
Feb 7, 2007Hello,I have an SQL procedure as follows: ... INSERT dbo.Levels (LevelName) VALUES (@LevelName) ... LevelName is an input parameter of nvarchar type. What should be the best way to execute this procedure from my C# / VB.Net code? And what would it return?Thanks,Miguel
View 7 Replies View RelatedExecute URL From Stored Procedure!
Apr 14, 2004Hi,
Can anybody please tell me if it is possible to execute an url from stored procedure.
thanks in advance,
preeth
Execute Store Procedure
Mar 18, 2002Hi!!!
i have a problem. I want to execute a sp from a DTS package but it doesn't work correctly. If i execute it from the query analyzer it work fine.
I have configured merge replication with pull subscription on the data base.
If someone can help me i will apreciate.
Execute Stored Procedure
Aug 10, 2000Hello:
I have created a stored procedure that will backup and restore a database.
I would like to be able to execute this sp using public rights - any ideas?
Thanks
"Execute Any Procedure" Grant?
Feb 9, 2001I am trying to set up a security system for my senior developers where they automatically can execute any procedure. It is in the System Administrator server role. Is there any way I can grant this role to their database role withour giving them complete System Adminstrator rights?
View 3 Replies View RelatedExecute Stored Procedure
Jun 14, 2008How can I use in stored procedure the faction ‘’in’’ to select values, using execute and the values must not be specified before in the stored procedure
View 6 Replies View RelatedExecute A Stored Procedure
Jul 23, 2005How do you execute a stored procedure in MS SQL Server?I can design and execute them from MS Access dev front end, but cannot seemto find how to run them in the Enterprise Manager.TIA.~ Duane Phillips.
View 2 Replies View RelatedExecute Stored Procedure
Mar 29, 2006I have setup a user which has execute rights on a stored procedure. The sp is owned by dbo. The user can execute the stored procedure, but it fails, because the stored procedure calls other tables and procedures that the user does not have rights to. Is there a way to allow those procedures to execute without allowing access to everything else for the user I setup? Thanks!
View 3 Replies View RelatedExecute Sp_start_job From Stored Procedure
Oct 27, 2006I need to disable and move orphaned computer objects in my Active Directory. The SQL Agent has permission to do this. I have created a stored procedure for the task with intentions of executing it with sp_start_job. However, I cannot execute it in SQL 2005. How can I grant permission to this (login) to execute sp_start_job? This is all run from a web page and NOT the Query Window.
View 1 Replies View RelatedHow I Can Execute DTS Packet Form Sql Procedure
Oct 13, 2007How I can execute DTS packet form sql procedure ??
View 2 Replies View RelatedHow Do I Execute A Stored Procedure Using SSIS
Oct 17, 2007Please anyone help me with my question
How do I execute a stored Procedure using SSIS ?
I have a stored procedure in SQL SERVER 2005 database that I need to execute using a SSIS package using Execute SQL Task from Toolbox in Visual studio 2005
Thanks,
George
Execute Insert Stored Procedure
Jan 22, 2008Hi,
I am strugling to execute a insert stored procedure on a button click. The stored procedure is taking values from a temp table and inserting them into a identical table. The procedure is expecting 1 value from a Query string, the stored procedure works as expected when hard coded.
Im completely new to this and have no idea where to begin, i have been looking through the forums for several hours and am still none the wiser.
please can someone point me in the right direction
How Can I Execute A N Exe File From Stored Procedure?
Aug 24, 2004hi to all,
i have a stored procedure and i want to run a program from it..
i think that i need use api functions but how can i do that..
if there is a nother ways please tell me..
thanx..
Button That Execute Stored Procedure
Jul 17, 2005I have a button in a form that I want to execute a simple stored procedure to insert a single value into a database table. The Stored Procedure is:=================CREATE PROCEDURE bplog_insert_invoice_detail (@invo_Id Int) ASINSERT INTO Invoice_Detail (Invo_Id) VALUES(@Invo_Id)GO=================How do i pass the value from and text field (@invo_id) and execute the stored procedure when a button is clicked.Regards.
View 1 Replies View RelatedDynamically Execute Stored Procedure
Oct 31, 2005Hello,I was wondering if it is possible to dynamically execute a stored procedure; for example, in SQL, you can do:insert into Table1( id, name)select id, namefrom Table2Can you do something like:exec spProc @id = id, @name = namefrom Table1Or something like that? I know I can select a row at a time and execute, or write a program, but I was looking to see if there was an easier way.Thanks.
View 1 Replies View RelatedHow To Write A Procedure That Has To Execute On A Different SQL Server
Nov 1, 2005Can I write a procedure that should connect to a different SQL server and execute a series of SELECT statement on that SQL SERVER.Reason being is I do not have permission to create procedure on that destination server while I have permission to execute a SELECT statement. Please clarifyThanks,
View 3 Replies View RelatedSimply Execute A Stored Procedure
Dec 20, 2005Hello, I'm having trouble trying to execute a simple stored procedure. Could someone please take a look at this and let me know where I went wrong.
Dim cn As SqlConnection = New SqlConnection("Data Source=localhost;Initial Catalog=TEST;Persist Security Info=True;User ID=sa;Password=test")
Dim cmd As SqlCommand = cn.CreateCommand
cn.Open()
cmd.CommandText = "cssp_family"
cmd.CommandType = CommandType.StoredProcedure
cmd.ExecuteNonQuery()
cn.closed
How To Execute Asynchronously Within A Stored Procedure
Apr 30, 2001Within a stored procedure, is it possible to call multiple other stored procedures asychronously? For example, I'd like to execute both local and remote stored procedures, but don't want/need to wait for the output while the original stored procedure continues to execute each subsequent command.
View 1 Replies View RelatedExecute DTS Package From A Stored Procedure?
Jun 27, 2001When I run the code microsoft give to launch a DTS package from a stored procedure, the procedure runs continuously, never ending.
When I run the DTS package manually, or from a dtsrun utility, it only takes seconds.
I'm trying to automate this package so it will run after a field in a table has been updated.
Any suggestions are more than welcome.
PS. Here's the code I've been using (that doesn't seem to work):
--- Declare Variables
Declare @hr int
Declare @oPkg int
--- Create Package Object
Exec @hr = sp_OACreate 'DTS.Package', @oPkg OUT
If @hr <> 0
Begin
Print '*** Create Package Object Failed'
Exec sp_oageterrorinfo @oPkg, @hr
Return
End
--- Load Package
---DTSSQLStorageFlags :
---DTSSQLFlag_Default = 0
---DTSSQLStgFlag_UseTrustedConnection = 256
Exec @hr = sp_OAMEthod @oPkg,'LoadFromSqlServer("JENNSERVER", "", "", 256, , , , "RunMS")',null
If @hr <> 0
Begin
Print '*** Load Package Failed'
Exec sp_oageterrorinfo @oPkg, @hr
Return
End
--- Execute Package
Exec @hr = sp_OAMethod @oPkg, 'Execute'
If @hr <> 0
Begin
Print '*** Execute Failed'
Exec sp_oageterrorinfo @oPkg, @hr
Return
End
--- Clean Up Package
Exec @hr = sp_oadestroy @oPkg
If @hr <> 0
Begin
Print '*** Destroy Package Failed'
Exec sp_oageterrorinfo @oPkg, @hr
Return
End
Can Stored Procedure Execute A Dos Command?
Jul 14, 2001Is it possible to create a stored procedure to run a custom dos command (eg. c:ProgramName param1 param2)?
Thanks,
Ben
Stored Procedure To Execute DTS Packages
Apr 26, 2004Hi, hoping someone may be able to shed some light on this.
I have a stored procedure that conditionally executes different DTS Packages. Everything seems to work, there's no errors at all, but the DTS Packages are never executed. Wondering if anyone has any ideas.
Here's the stored procedure....
CREATE PROCEDURE exportLists
AS
DECLARE @script VARCHAR(8000)
DECLARE @id INT
DECLARE @max INT
select regionid,count(distinct homephone) as phone
into #phone
from tbl_template
Where exportid is null
group by regionid
select officeid,listpath
into #office
from tbl_office
WHERE startdate <= GETDATE()
AND (enddate >= GETDATE() OR enddate IS NULL)
and listpath is not null
and listpath <> ''
Select case when phone > 2500 then '"exportLists" /A MDBFile="' + listpath + '" /A OfficeID ="' + convert(varchar(10),officeid) + '" '
Else '"resetTemplate" /A OfficeID="' + convert(varchar(10),officeid) + '" '
end as cmd
,Identity(int,1,1) as rowno
,phone
into #temp
from #office as O
inner Join #phone as p
on o.officeid=p.regionid
Set @max=@@rowcount
set @id = 1
While @id <=@max
Begin
Select @script='"Dtsrun /S "' + @@SERVERNAME + '" /E /N ' + cmd
+ case when phone > 2500
then '/A ExportID="' + convert(varchar(10),(Select coalesce(Max(listid),0) + 1 from tbl_sf3Lists)) + '" '
else ' ' end
, @id=@id+1
from #temp
Where rowno = @id
End
Return
GO
Permission To Execute Stored Procedure
Feb 8, 2006Which fixed database role allows a user to execute a user defined stored procedure while minimizing the amount of permissions given. I think db_Datareader will do the trick.
View 1 Replies View RelatedHow To Execute DTS Package From Stored Procedure
Jan 6, 2004Hi everybody,
I would like to ask that how can I execute a package from a stored procedure.
Laci
Cant Get Stored Procedure To Execute Properly
Jun 12, 2008Hi,
I am trying to execute the following simple stored procedure. The procedure runs but doesn't create the table I am trying to create and doesn't insert the records into the table I created. But again, the procedure runs without any errors.
Can someone please correct the syntax so my procedure will run properly. It pretty basic.
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE [dbo].[PremierData1]
AS
IF EXISTS(SELECT 1 FROM sys.sysojects where type='U' AND name='PremierTest') DROP TABLE dbo.[PremierTest]
BEGIN
CREATE TABLE dbo.[PremierTest] (
[AYQ] nvarchar(6) null ,
[CYQ] nvarchar(6) null ,
[Description] nvarchar(50) null,
[PIP] [decimal] (17,2) ,
[BI] [decimal](17,2) Not null,
[PD] [decimal](17,2) Not null,
[COLL] [decimal](17,2) not null,
[COMP] [decimal](17,2) not null,
[DCRAT] [nvarchar](2) null ,
[Agent][nvarchar](3) null ,
) ON [Primary]
insert into dbo.premiertest
select *
from dbo.[new agt type tri 0804]
where dir_ceded_ind = 'c'
END
Thank you for any help provided.
Automatically Execute A Stored Procedure
Dec 13, 2006I don't know if this is a newbie question or not, I want SQL Server to automatically execute a stored procedure at the first of each month, how can I do this ?
Regards,
AJ
Be nice to nerds. Chances are you'll end up working for one. (Bill Gates)
? Execute SSIS Pkg From Stored Procedure
Feb 2, 2007Is there a programatic way to execute an SSIS package (passing the appropriate parameters) from within a stored procedure. I've seen some examples using xp_CmdShell, but would rather not go that route if possible
View 1 Replies View RelatedExecute Stored Procedure In A Resultset[:D]
Feb 21, 2007I have a sql server resultset that returns productid numbers. I would like to loop thru this resultset and run a stored procedure using the productid as the input parameter. Any samples would be helpful. thanks
View 3 Replies View RelatedMsg 18483 When Trying To Execute Remote Procedure
Dec 18, 2007using SQL Server 2005 sp2
I've added the linked server options with the appropriate login credentials (Be made using this security context) to access the remote server. The account used is db_owner on both the desired db and the master db.
When I query [serverinstance].database.dbo.customers I get the results I desire but when I try to execute a stored procedure on that database, exec [serverinstance].database.dbo.procCustomers, the following error occurs:
Msg 18483, Level 14, State 1, Line 1
Could not connect to server 'serverinstance' because 'logn' is not defined as a remote login at the server. Verify that you have specified the correct login name. .
Thanks for any help.
How To Execute A Url In Tsql Stored Procedure
Feb 29, 2008Can i execute a URL in tsql stored procedure.
Waht i want's is to hit a url on some event.
I know i can do it in CLR stored procedure but for that i have to deploy assembly on the server which i want's to avoid.
Is there any way i can hit a url from tsql stored procedure
Kamran Shahid
Sr. Software Engineer(MCSD.Net)
www.netprosys.com