I need to find the rows that exist in one table but not in the other
with this condition:
(prod_name exist in table1 and not in table2.prod_name ) AND
(prod_name exist in table1 and not in table2.'S'+prod_name )
explanation:
i want to know if the product not exit and if the combination of the
charachter "S" with the product Name also not exist at the other
table
B.R
yuvi
I have data as below: select ID,code,go,back from tableA
ID code go back
2 C US UK
2 A UK US
1 A US UK
1 Z UK US
1 C UK US
1 A US UK
I only want to pull out whole ID group which code Z exist. I tried as below:
select ID,code,go,back from tableA A
where exists
( select ID,go,back
from tableA B with (nolock)
where A.ID = B.ID
and A.code='Z')
But it only appear:
ID code go back
1 Z UK US
How can I appear with the group as well?
ID code go back
1 A US UK
1 Z UK US
1 C UK US
1 A US UK
I have table 'stores' that has 3 columns (storeid, article, doc), I have a second table 'allstores' that has 3 columns(storeid(always 'ALL'), article, doc). The stores table's storeid column will have a stores id, then will have multiple articles, and docs. The 'allstores' table will have 'all' in the store for every article and doc combination. This table is like the master lookup table for all possible article and doc combinations. The 'stores' table will have the actual article and doc per storeid.
What I am wanting to pull is all article, doc combinations that exist in the 'allstores' table, but do not exist in the 'stores' table, per storeid. So if the article/doc combination exists in the 'allstores' table and in the 'stores' table for storeid of 50 does not use that combination, but store 51 does, I want the output of storeid 50, and what combination does not exist for that storeid. I will try this example:
'allstores' 'Stores'
storeid doc article storeid doc article
ALL 0010 001 101 0010 001
ALL 0010 002 101 0010 002
ALL 0011 001 102 0011 002
ALL 0011 002
So I want the query to pull the one from 'allstores' that does not exist in 'stores' which in this case would the 3rd record "ALL 0011 001".
I am using stored procedure to load gridview but problem is that i am not getting all rows from first table[ Subject] on applying conditions on second table[ Faculty_Subject table] ,as you can see below if i apply condition :-
Faculty_Subject.Class_Id=@Class_Id
Then i don't get all subjects from subject table, how this can be achieved.
Sql Code:-
GO
ALTER Proc [dbo].[SP_Get_Subjects_Faculty_Details]
@Class_Id int
AS BEGIN
[code] ....
Hello,
I need to delete rows from one table that appear in another table.
For example:
newnames has fname, lname, age
oldnames has fname, lname, age
So, I want to be able to remove the rows from newname where there are rows in oldnames. This should be simple enough.
This is what I'm trying to use but it is deleting everything from oldnames.
delete from oldname
select * from newnames
Hi,
I have a table of row IDs, order numbers, and status. Status is a value of 1 or 2. Some rows only exist as a 1, some only as a 2, and some exist twice -- once as 1 and once as 2. I want to select orders that are 2 as well as rows that are 1 but do not also exist in the table as 2. Ultimately I will only see each order number once. Is there a better/faster way than doing multiple selects and comparing them to each other?
Example data:
RowID OrderNum Status
1 101 1
2 102 1
3 102 2
4 103 2
Desired results when selecting ID and ordernum from that table:
1 101
3 102
4 103
Thanks.
Hi All,
What is the most straighforward way of not importing rows that already exist in the destination table (as determined by a primary key value)? Thanks.
Regards,
Daniel
I need a SSIS Package that compares the two tables and removes the rows in the first table with keys that do not exist in the second table. For example....
I have a table of returns based on returnID. In another table I have returnErrors that are based on returnID as well. I want a package that will uses my returns table as a source and compares that dataset to the dataset of the returnError and remove or spilt the data so that my remaining dataset only has returns that have returnErrors. I can do this in T-SQL, but I am looking for a SSIS solution that uses the conditional split transformation or some other transformation(s) combinations.
-- Ryan
I have around 3 tables having around 20 to 30gb of data. My table A related to table B by a FK and same way table B related to table C by FK. I would like to delete all rows satisfying certain condition from table A and all corresponding related records from table B and C. I have created a query to delete the grandchild first, followed by child table and finally parent. I have used inner join in my delete query. As you all know, inner join delete operations, are going to be extremely resource Intensive especially on bigger tables.
What is the best approach to delete all these rows? There are many constraints, triggers on these tables. Also, there might be some FK relations to other tables as well.
Hi All,
I am working on SQL server 2005 Reports.
I have one report, one dataset is assigned to it, and one table which displays it.
Now I come accros requirement that, the column value in the filter condition for the table is present in one textbox.
I can not use textbox i.e. reportItems in filter condition. Can someone suggest me how to use textbox value in filters?
I want to display parent/child records on report. I am not getting the proper solution.
The data is like this:
Sequence ItemCode IsParent
1 XYZ 0 'do not have child record
2 PQR 1 'have child records with sequence no 3
3 ASD 0
3 AFDGE 0
3 VDC 0
4 ASR 1 'have child records with sequence no 5
5 ASR 0
If IsParent = 1, that record has child records with sequence = parent sequenece + 1
I think u can understand the data I need to bind, and it is like:
XYZ
+ PQR
ASD
AFDGE
VDC
ASR
On + click we can do show/hide of child records.
I m not getting how to achive this in SQL server report. Can u give some hint?
Thanks in advance
Pravin
Hi Frinds,
How can i find out the no of rows in each table. if the no of table are more than thousands(i.e. 1000+,2000+ etc..) are there. Certainly 'select count(0) from <table>' is not the good idea. Egarly awaiting for the solution.
thanks
Nageswara Rao Bomma
nrbomma@yahoo.com
nrbomma@hotmail.com
Hi
I have a problem where I must compair an import table with a local datatable and import rows that are missing and correct the rows that are different.
How to best do this?
I was hoping to avoid cursors
thanks
Walter
I try to find the number of rows in a table with this commands:
CountRec = New SqlParameterCountRec.ParameterName = "@countrec"CountRec.SqlDbType = SqlDbType.IntCountRec.Value = 0MyCommand = New Data.SqlClient.SqlCommand()MyCommand.CommandText = "select count(*) as @countrec from Customer;"MyCommand.CommandType = Data.CommandType.TextMyCommand.Connection = MyConnectionMyCommand.Parameters.Add(CountRec)MyCommand.Connection.Open()MyReader = MyCommand.ExecuteReaderiRecordCount = CountRec.Value
This is the result:
Incorrect syntax near '@countrec'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Incorrect syntax near '@countrec'.Source Error:
Line 39:
Line 40: MyCommand.Connection.Open()
Line 41: MyReader = MyCommand.ExecuteReader
Line 42: iRecordCount = CountRec.Value
Line 43:
Source File: E:DevelopWebASPwebAccessTimberSalesUserEntry.aspx.vb Line: 41
What to do? I need a complete example to see how it works.
Thanks...
Hello All,
I have one table that contains information about invoices.
However I need to find out if invoice numbers have been used more than once.
I've tried to join the table to itself and find matching numbers, however I can't seem to get it to work properly.
Any help will be appreciated.
Thanks,
I have a conditional split in an SSIS package - one split is where if rows are returned according to a specific rule, then insert those rows into to a Recordset Destinationm which points to a variable of Object type.
How I can use this variable to email fellow users. For example, what I would like is if ANY rows are returned to the Object variable (1 or more), then I would like to execute an email SP that we have on our server.
Can't seem to make this SQL query work!
Given one table, Table1, with columns Key1 (int), Key2 (int), and Type (varchar)...
I would like to get the rows where Type is equal to 'TypeA' and Key2 is Null that do NOT have a corresponding row in the table where Type is equal to 'TypeB' and Key2 is equal to Key1 from another row
So, given the data
**KEY1** **Key2** **Type**
1 NULL TypeA
2 5 TypeA
3 1 TypeB
4 NULL TypeA
5 NULL TypeB
I would like to return only the row where Key1 = 4 because that row meets the criteria of Type='TypeA'/Key2=NULL and does not have a corresponding row with Type='TypeB'/Key1=Key2 from another row.
I have tried this and it doesn't work...
SELECT t1.Key1, t1.Key2, t1.Type
FROM Table1 t1
WHERE t1.Key2 IS NULL
AND t1.Type LIKE 'TypeA'
AND t1.Key1 NOT IN
(SELECT Key1
FROM Table1 t2
WHERE t1.Key1 = t2.Key2
AND t1.Key1 <> t2.Key1
AND t2.Type LIKE 'TypeB')
How to find the equal and opposite rows in a table.
E.g.:
book position
A 500
B -500
C -500
The output should return the rows having equal and opposite positions.
O/P:
A 500
B -500
I have tried self join on a table but in vain.Do we need to cursors for these row level handling?
which is the most efficient query to find out the total number of rows in a table other than using - SELECT COUNT(*) ... in query
View 10 Replies View RelatedHow can we monitor the all tables in all databases and send notifications to the team.Is there a way to check to find the no of rows and size of a table last month and find out growth % now
View 4 Replies View RelatedI'm trying to run an Insert on tables using a User Login but I keep getting the error above. I ran the insert using my own credentials and it worked. The User LOGIN in question has read & write permission to the database.
View 4 Replies View RelatedHi,I want to know the optimal solution, to find if all the data was entered. Lets say, Table A (date field) and for a given month, i need that all the days in the given month are present in the Table A. Right now i have different solutions, 1) a stored procedure which loops through all the days in the given month against a select statement on Table A2) a stored procedure, create a temp table which contains all the dates in the given month, and a single select statement using where condition (select * from.... where datefield not in (select * from...))I want to know what is the best solution of these two or any other solution.Thanks
View 9 Replies View RelatedThe following
SearchCondition[] sc = {new SearchCondition() {
Name = "TypeName"
,Values = new string[] {"Report"}
,Condition = ConditionEnum.Equals
,ConditionSpecified = true
}};
catalogItems = ReportService2010.FindItems("/"
,BooleanOperatorEnum.And
,new Property[] {new Property(){Name = "Recursive",Value="True"}}
,sc
);
Returns the following error
System.Web.Services.Protocols.SoapException: The TypeName field has a value that is not valid. ---> Microsoft.ReportingServices.Diagnostics.Utilities.InvalidElementException: The TypeName field has a value that is not valid.
at Microsoft.ReportingServices.WebServer.ReportingService2010Impl.FindItems(String Folder, BooleanOperatorEnum BooleanOperator, Property[] SearchOptions, SearchCondition[] SearchConditions, CatalogItem[]& Items)
at Microsoft.ReportingServices.WebServer.ReportingService2010.FindItems(String Folder, BooleanOperatorEnum BooleanOperator, Property[] SearchOptions, SearchCondition[] SearchConditions, CatalogItem[]& Items)
The type appears to be correct. I've tried type of "Folder" and receive the same error.
Hi
I am developing a scientific application (demographic forecasting) and have a situation where I need to update a variety of rows, say the ith, jth and kth row that meets a particular condition, say, x.
I also need to adjust rows, say mth and nth that meet condition , say y.
My current solution is laborious and has to be coded for each condition and has been set up below (If you select this entire piece of code it will create 2 databases, each with a table initialised to change the 2nd,4th,8th and 16th rows, with the first database ignoring the condition and with the second applying the change only to rows with 'type1=1' as the condition.)
This is an adequate solution, but if I want to change the second row meeting a second condition, say 'type1=2', I would need to have another WITH...SELECT...INNER JOIN...UPDATE and I'm sure this would be inefficient.
Would there possibly be a way to introduce a rank by type into the table, something like this added column which increments for each type:
ID
Int1
Type1
Ideal Rank by Type
1
1
1
1
2
1
1
2
3
2
1
3
4
3
1
4
5
5
1
5
6
8
2
1
7
13
1
6
8
21
1
7
9
34
1
8
10
55
2
2
11
89
1
9
12
144
1
10
13
233
1
11
14
377
1
12
15
610
1
13
16
987
2
3
17
1597
1
14
18
2584
1
15
19
4181
1
16
20
6765
1
17
The solution would then be a simple update based on an innerjoin reflecting the condition and rank by type...
I hope this posting is clear, albeit long.
Thanks in advance
Greg
PS The code:
USE
master
GO
CREATE DATABASE CertainRowsToChange
GO
USE CertainRowsToChange
GO
CREATE TABLE InitialisedValues
(
InitialisedValuesID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL
)
GO
CREATE PROCEDURE Initialise
AS
BEGIN
INSERT INTO InitialisedValues (Int1 )
SELECT 2
INSERT INTO InitialisedValues (Int1 )
SELECT 4
INSERT INTO InitialisedValues (Int1 )
SELECT 8
INSERT INTO InitialisedValues (Int1 )
SELECT 16
END
GO
EXEC Initialise
/*=======================================================*/
CREATE TABLE AllRows
(
AllRowsID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL
)
GO
CREATE TABLE RowsToChange
(
RowsToChangeID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL
)
GO
CREATE PROCEDURE InitialiseRowsToChange
AS
BEGIN
INSERT INTO RowsToChange (Int1 )
SELECT 2
INSERT INTO RowsToChange (Int1 )
SELECT 4
INSERT INTO RowsToChange (Int1 )
SELECT 8
INSERT INTO RowsToChange (Int1 )
SELECT 16
END
GO
EXEC InitialiseRowsToChange
GO
CREATE PROCEDURE PopulateAllRows
AS
BEGIN
INSERT INTO AllRows (Int1 )
SELECT 1
INSERT INTO AllRows (Int1 )
SELECT 1
INSERT INTO AllRows (Int1 )
SELECT 2
INSERT INTO AllRows (Int1 )
SELECT 3
INSERT INTO AllRows (Int1 )
SELECT 5
INSERT INTO AllRows (Int1 )
SELECT 8
INSERT INTO AllRows (Int1 )
SELECT 13
INSERT INTO AllRows (Int1 )
SELECT 21
INSERT INTO AllRows (Int1 )
SELECT 34
INSERT INTO AllRows (Int1 )
SELECT 55
INSERT INTO AllRows (Int1 )
SELECT 89
INSERT INTO AllRows (Int1 )
SELECT 144
INSERT INTO AllRows (Int1 )
SELECT 233
INSERT INTO AllRows (Int1 )
SELECT 377
INSERT INTO AllRows (Int1 )
SELECT 610
INSERT INTO AllRows (Int1 )
SELECT 987
INSERT INTO AllRows (Int1 )
SELECT 1597
INSERT INTO AllRows (Int1 )
SELECT 2584
INSERT INTO AllRows (Int1 )
SELECT 4181
INSERT INTO AllRows (Int1 )
SELECT 6765
END
GO
EXEC PopulateAllRows
GO
SELECT * FROM AllRows
GO
WITH Temp(OrigID)
AS
(
SELECT OrigID FROM
(SELECT Row_Number() OVER (ORDER BY AllRowsID Asc ) AS RowScore, AllRowsID AS OrigID, Int1 AS OrigValue FROM Allrows) AS FromTable
INNER JOIN
RowsToChange AS ToTable
ON FromTable.RowScore = ToTable.Int1
)
UPDATE AllRows
SET Int1=1000
FROM
Temp as InTable
JOIN Allrows as OutTable
ON Intable.OrigID = OutTable.AllRowsID
GO
SELECT * FROM AllRows
GO
USE
master
GO
CREATE DATABASE ComplexCertainRowsToChange
GO
USE ComplexCertainRowsToChange
GO
CREATE TABLE InitialisedValues
(
InitialisedValuesID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL
)
GO
CREATE PROCEDURE Initialise
AS
BEGIN
INSERT INTO InitialisedValues (Int1 )
SELECT 2
INSERT INTO InitialisedValues (Int1 )
SELECT 4
INSERT INTO InitialisedValues (Int1 )
SELECT 8
INSERT INTO InitialisedValues (Int1 )
SELECT 16
END
GO
EXEC Initialise
/*=======================================================*/
CREATE TABLE AllRows
(
AllRowsID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL,
Type1 int NOT NULL
)
GO
CREATE TABLE RowsToChange
(
RowsToChangeID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL,
Type1 int NOT NULL
)
GO
CREATE PROCEDURE InitialiseRowsToChange
AS
BEGIN
INSERT INTO RowsToChange (Int1,Type1 )
SELECT 2, 1
INSERT INTO RowsToChange (Int1,Type1 )
SELECT 4, 1
INSERT INTO RowsToChange (Int1,Type1 )
SELECT 8, 1
INSERT INTO RowsToChange (Int1,Type1 )
SELECT 16, 1
END
GO
EXEC InitialiseRowsToChange
GO
CREATE PROCEDURE PopulateAllRows
AS
BEGIN
INSERT INTO AllRows (Int1, Type1 )
SELECT 1, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 1, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 2, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 3, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 5, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 8, 2
INSERT INTO AllRows (Int1, Type1 )
SELECT 13, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 21, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 34, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 55, 2
INSERT INTO AllRows (Int1, Type1 )
SELECT 89, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 144, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 233, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 377, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 610, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 987, 2
INSERT INTO AllRows (Int1, Type1 )
SELECT 1597, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 2584, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 4181, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 6765, 1
END
GO
EXEC PopulateAllRows
GO
SELECT * FROM AllRows
GO
WITH Temp(OrigID)
AS
(
SELECT OrigID FROM
(SELECT Row_Number() OVER (ORDER BY AllRowsID Asc ) AS RowScore, AllRowsID AS OrigID, Int1 AS OrigValue FROM Allrows WHERE Type1=1) AS FromTable
INNER JOIN
RowsToChange AS ToTable
ON FromTable.RowScore = ToTable.Int1
)
UPDATE AllRows
SET Int1=1000
FROM
Temp as InTable
JOIN Allrows as OutTable
ON Intable.OrigID = OutTable.AllRowsID
GO
SELECT * FROM AllRows
GO
Hello,
I have troublesome problem with service broker. I move a lot of databases
from one server to another servers (by backup and restore) but always have problem with
databases where service broker is enabled. Bellow is my scenario:
1. backup database db1 (srv1)
2. restore db1 (srv2, srv3, srv4.....)
3. drop manually Services and Queues, only green filed
(http://img122.imageshack.us/img122/549/clipqk5.jpg) (srv2, srv3, srv4.....)
4. alter database db1 set enable_broker (srv2, srv3, srv4.....)
After that SQL Server log on each server is full bellow errors, nobody so
far can help me
Could you help, please
############
SRV2
03/03/2008 18:54:41,spid21s,Unknown,The query notification dialog on
conversation handle '{E6BF547B-0AE6-DC11-A4BD-00E08127B819}.' closed due to
the following error: '<?xml version="1.0"?><Error
xmlns="http://schemas.microsoft.com/SQL/ServiceBroker/Error"><Code>-8490</Code><Description>Cannot find the remote service
'SqlQueryNotificationService-53c1dc9b-7d22-4310-a5b6-18ac97ae4bf3'
because it does not exist.</Description></Error>'.
03/03/2008 18:54:41,spid27s,Unknown,The query notification dialog on
conversation handle '{AA68F7D8-F7E5-DC11-A4BD-00E08127B819}.' closed due to
the following error: '<?xml version="1.0"?><Error
xmlns="http://schemas.microsoft.com/SQL/ServiceBroker/Error"><Code>-8490</Code><Description>Cannot find the remote service
SERV3
03/02/2008 00:32:25,spid21s,Unknown,The query notification dialog on
conversation handle '{2BC70B27-F1E3-DC11-AB50-0017085CAA29}.' closed due to
the following error: '<?xml version="1.0"?><Error
xmlns="http://schemas.microsoft.com/SQL/ServiceBroker/Error"><Code>-8490</Code><Description>Cannot find the remote service
'SqlQueryNotificationService-abc6a7ce-53f1-411e-85a7-50c09e2699e1'
because it does not exist.</Description></Error>'.
03/02/2008 00:29:20,spid22s,Unknown,The query notification dialog on
conversation handle '{DF112861-F9E3-DC11-AB50-0017085CAA29}.' closed due to
the following error: '<?xml version="1.0"?><Error
xmlns="http://schemas.microsoft.com/SQL/ServiceBroker/Error"><Code>-8490</Code><Description>Cannot find the remote service
SRV4
03/02/2008 16:15:07,spid25s,Unknown,The query notification dialog on
conversation handle '{4179E578-7DE4-DC11-9A69-00145E1B71FC}.' closed due to
the following error: '<?xml version="1.0"?><Error
xmlns="http://schemas.microsoft.com/SQL/ServiceBroker/Error"><Code>-8490</Code><Description>Cannot find the remote service
'SqlQueryNotificationService-01e16746-e114-4e8c-b587-91e93768a9a8'
because it does not exist.</Description></Error>'.
03/02/2008 16:15:07,spid20s,Unknown,The query notification dialog on
conversation handle '{5079E578-7DE4-DC11-9A69-00145E1B71FC}.' closed due to
the following error: '<?xml version="1.0"?><Error
xmlns="http://schemas.microsoft.com/SQL/ServiceBroker/Error"><Code>-8490</Code><Description>Cannot find the remote service
############
I am using the following query to retrieve the top five customers from a MySQL table where 'accmanid' 1:
SELECT accmanid, custid, SUM(billone + billtwo) AS
total FROM customers WHERE accmanid = 1 ORDER BY total DESC LIMIT 5
This outputs five rows ordered by the total bill where accman = 1.
Here is my question:
How can I write the query to output five rows for EACH accmanid; Im not sure how to do such without the WHERE clause.
Not sure how to do this but here is example of what I have
Table A
ID data1 data2 data3 data4
1 535 452 213 554
2 325 651 321 554
3 654 846 096 355
4 765 658 321 422
I want to have a select that will pull the following information out with count = the number of rows that have matching data in data4
ID data1 count
1 535 2
2 325 2
3 654 1
4 765 1
Right now I am using a VB script to loop thru get the current data4 value then using SELECT COUNT(data1) AS count FROM tbl_toolerrors WHERE data4 = {data4 value currently looking at}
Of course this take a bunch of trips to database and I think there should be a way to do it. I was thinking of a nested SQL querry like
Select data1, data2, ID, data3, (select count ...) Order by data1
can anyone help?
Hi,
I have two tables : Students and StuHistory. The structure of the Student table is as follows :
IF NOT EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[Student]') AND type in (N'U'))
BEGIN
CREATE TABLE [dbo].[Student](
[RID] [int] NOT NULL,
[Class] [int] NULL,
[Section] [char](1) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[SubSection] [int] NULL,
[RollNo] [int] NULL,
[DesiredRoll] [int] NULL,
[TrackingNo] [int] NULL,
[Original_rollno] [int] NULL,
[StudentStatus] [int] NULL
)
END
GO
A section has subsections where students are allocated rollno's. Every student has a unique roll no in that subsection. However he is also given a choice to enter his desired roll no. If more than one student choose the same desired roll no in that subsection/section, there is a [TrackingNo] field that then starts keeping a count. For the first unique desired roll no in that subsection/section the tracking no is always 0.
[StudentStatus] represents the following : (-1 for deleted, 0 for edited, 1 for newly inserted).
After every fortnight, i have to run a batchquery that does the following:
1. all students marked with -1 are moved to a table called StuHistory which has the same structure as that of Student.
2. Now oncethe -1 status students are moved, there will be a gap in the roll no. I want to reallocate the rollnos now, where rollnos = desired roll no taking into consideration the trackingno
So if 4 students have chosen the desired roll no as 5 and their current roll no is scattered in a subsection lets say 7, 10, 14,16, then while rearranging they will be together(grouped by subsection/section) and will be allocated roll no's 5,6,7,8. The other students will be moved down based on their desired roll nos. Over here i have to also fill the gaps caused because of the students who were deleted.
How do i write query for this? I have been struggling.
I thought of posting this as a new post as it was mixed in the previous post.
Script :
INSERT [dbo].[Student] ([RID], [Class], [Section], [SubSection], [RollNo], [DesiredRoll], [TrackingNo], [Original_rollno], [StudentStatus] )
VALUES (1, 1, N'A', 1, 1, 1, 0, 0, 1)
INSERT [dbo].[Student] ([RID], [Class], [Section], [SubSection], [RollNo], [DesiredRoll], [TrackingNo], [Original_rollno], [StudentStatus] )
VALUES (2, 1, N'A', 1, 2, 2, 0, 0, 1)
INSERT [dbo].[Student] ([RID], [Class], [Section], [SubSection], [RollNo], [DesiredRoll], [TrackingNo], [Original_rollno], [StudentStatus] )
VALUES (3, 1, N'A', 1, 3, 1, 1,0,1)
INSERT [dbo].[Student] ([RID], [Class], [Section], [SubSection], [RollNo], [DesiredRoll], [TrackingNo], [Original_rollno], [StudentStatus] )
VALUES (4, 1, N'A', 12, 1, 1, 0,-1)
INSERT [dbo].[Student] ([RID], [Class], [Section], [SubSection], [RollNo], [DesiredRoll], [TrackingNo], [Original_rollno], [StudentStatus] )
VALUES (5, 1, N'A', 12, 2, 1, 1, 0, 1)
INSERT [dbo].[Student] ([RID], [Class], [Section], [SubSection], [RollNo], [DesiredRoll], [TrackingNo], [Original_rollno], [StudentStatus] )
VALUES (6, 1, N'A', 12, 3, 2, 0, 0, 1)
INSERT [dbo].[Student] ([RID], [Class], [Section], [SubSection], [RollNo], [DesiredRoll], [TrackingNo], [Original_rollno], [StudentStatus] )
VALUES (7, 1, N'B', 5, 1, 3, 0, 0, 1)
INSERT [dbo].[Student] ([RID], [Class], [Section], [SubSection], [RollNo], [DesiredRoll], [TrackingNo], [Original_rollno], [StudentStatus] )
VALUES (8, 1, N'B', 5, 2, 3, 1, 0 ,1)
INSERT [dbo].[Student] ([RID], [Class], [Section], [SubSection], [RollNo], [DesiredRoll], [TrackingNo], [Original_rollno], [StudentStatus] )
VALUES (9, 1, N'B', 5, 3, 3, 2, 0, 1)
INSERT [dbo].[Student] ([RID], [Class], [Section], [SubSection], [RollNo], [DesiredRoll], [TrackingNo], [Original_rollno], [StudentStatus] )
VALUES (10, 1, N'B', 5, 4, 2, 0, 0, 1)
INSERT [dbo].[Student] ([RID], [Class], [Section], [SubSection], [RollNo], [DesiredRoll], [TrackingNo], [Original_rollno], [StudentStatus] )
VALUES (11, 1, N'B', 5, 5, 2, 1, 0, 1)
INSERT [dbo].[Student] ([RID], [Class], [Section], [SubSection], [RollNo], [DesiredRoll], [TrackingNo], [Original_rollno], [StudentStatus] )
VALUES (12, 1, N'B', 10, 1, 1, 0, 0, 1)
INSERT [dbo].[Student] ([RID], [Class], [Section], [SubSection], [RollNo], [DesiredRoll], [TrackingNo], [Original_rollno], [StudentStatus] )
VALUES (13, 1, N'B', 10, 2, 1, 1, 0, 1 )
INSERT [dbo].[Student] ([RID], [Class], [Section], [SubSection], [RollNo], [DesiredRoll], [TrackingNo], [Original_rollno], [StudentStatus] )
VALUES (14, 1, N'B', 10, 3, 1, 2, 0, -1)
INSERT [dbo].[Student] ([RID], [Class], [Section], [SubSection], [RollNo], [DesiredRoll], [TrackingNo], [Original_rollno], [StudentStatus] )
VALUES (15, 1, N'B', 10, 4, 2, 0, 0, 1)
Thanks.
Create table #table (id int identity , from_country varchar(20) ,
to_country varchar(20),noofdays int, datetravel datetime )
insert into #table(from_country,to_country,noofdays,datetravel)
values
('Malaysia','India',2,getdate()-99),
('India','Singapore',4,getdate()-88),
('Singapore','China',5,getdate()-77),
('China','Japan',6,getdate()-66),
('Japan','USA',7,getdate()-55)
select * from #table
I want to insert data to another table based on "noofdays" columns. If "noofdays" is 4 then 4 rows should inserted to new table with 1 day increment in "datetravel" column.
Ex :
#table
1MalaysiaIndia22015-02-09 02:04:09.247
2IndiaSingapore42015-02-20 02:04:09.247
[code]...
In #table , 1st row noofdays is 2 , so in new table #table_new first 2 rows should inserted with 1 day increment in "datetravel" column.
I have table with filed
EmpProject -Table
Empno, Name, Project NO, cost center
I need to restrict the results by project No by user input. In case if user did not provide any value for the projectNO, then need to fetch all rows.
Select empno, name, projecno, cost_center from empproject where projectno=nvl(:pno, :deptno)
Hi,
I have different tables with the same schema as follows
ID Name
-----------------
<Table 1>
ID Name
-------------------
1 Name1
2 Name2
3 Name3
<Table 2>
ID Name
-------------------
1 Name1
4 Name4
5 Name5
I just want to delete the row where ID = 1 from these tables in one query ? Is it possible??
Thanks
~Mohan
I am using SQL Server 2008.Each stock item will have default 4 document type (1, 5, 6, 7) and each will have 3 zone's (1, 2, 3) to qualify. Each zone will be updated to 1 for that document type if the item successfully pass through it. If all zone are NULL means no transaction. How to retrieve only the failed rows which means not all zone are 1 or NULL.In the image GJ-00064 has one row failed. So how to get the count of failed rows for each item
Expected result:
Uniid <-> Stockcode <-> FailedRows
1670 <-> GJ-00064 <-> 1
Hi below sample data incoming from a source that cannot be changed. Please ignore the mishandling of zls. Obviously it is not insurmountable - I am just interested in why it is happening because I cannot explain it. DECLARE @t TABLE(the_data CHAR(73)) SET DATEFORMAT dmySET NOCOUNT ON INSERT INTO @tSELECT ' 11'+SPACE(5)+'1649KN889001 2'+space(10)+'0'+space(10)+'08 01 2002'+space(10)+'04 10 2002'UNION ALLSELECT ' 11'+SPACE(5)+'1649KN889001 2'+space(10)+'109 08 2004'+space(20)+'21 07 2005'UNION ALLSELECT ' 11 13026721XX198734 1'+space(10)+'0'+space(10)+'XXXXXXXXXX'+space(10)+ '09 01 2003' SELECT CAST(REPLACE(REPLACE(date1_text,' ','/'),'XXXXXXXXXX',NULL) AS SMALLDATETIME) AS date_1_prob,CAST(REPLACE(REPLACE(date1_text,' ','/'),'XXXXXXXXXX','') AS SMALLDATETIME) AS date_1_ok_ish,CAST(NULLIF(REPLACE(date1_text,' ','/'),'XXXXXXXXXX') AS SMALLDATETIME)AS date_1_fine, date1_textFROM--derived table - selecting relevant substring(SELECT LTRIM(RTRIM(SUBSTRING(the_data, 44, 10))) AS date1_textFROM @t)AS der_t date_1_prob date_1_ok_ish date_1_fine date1_text----------------------- ----------------------- ----------------------- ----------NULL 2002-01-08 00:00:00 2002-01-08 00:00:00 08 01 2002NULL 1900-01-01 00:00:00 1900-01-01 00:00:00 NULL 1900-01-01 00:00:00 NULL XXXXXXXXXX Can anyone explain the result in the first row first column? Thanks
View 8 Replies View Related
Hi,
I have the following scenario :
CustomerDetail
customerid
customername
status
app_no
[status = 0 means customer virtually deleted]
CustomerArchive
archiveno [autoincrement]
customerid
customername
status
At the end of the month, I have to physically delete customers. I have written two stored procs:
proc1
create proc spoc_startdeletion
as
declare @app_no int
select @app_no = (select app_no from customerdetail where status=0)
EXEC spoc_insertcustomerarchive @app_no
-- After transferrin, physically delete
delete from customerdetail where status=0
proc2
create proc spoc_insertcustomerarchive
@app_no int
as
insert into customerarchive(customerid,customername,status)
select customerid,customername,status from customerdetail where app_no = @app_no
It works fine if there is only one row with status=0, however the problem is that when there are multiple rows in customerdetail with status=0, it returns 'Subquery returned more than one value'
How can i transfer multiple rows one by one from the customerdetail to customerarchive and then delete the rows once they are transferred.
Vidkshi