Hi
Can anybody tell me that how can i configure the things that will show my main report page when i enter Url like http://localhost/ReportServer. It gives directory struction first & then we have to select particular report
Rajnish
Hi All,
I am having a main report having two subreports, say M1,S1 and S2 respectively.
The issue is S2 normally tend to go beyond one page, for all pages except first page of the of the subreport I am getting the page header and footer blank,
Actually this is not loading the ReportItems that are used in main report but it shows text boxes containing strings for eg . "My Name" and date functions eg Today()
Any Solution?
Thanks and Regards
Pragash
What we've found is that when you have two reports where one navigates to the other, if you click on the second page of the second report, it takes you to the second page of the original report. If you navigate over to the subreport again and click for the second page, it works appropriately. This is definitely a no-go for production code and this may delay our ship date because I would think this is definitely undesirable.
Conditions:
ASP.NET Report Viewer using Remote Reports
Report that links to another report
Both reports return more than one page
Reporting Services installed
Steps to Reproduce:
Download the source code here.
Follow the directions (near the bottom of the post) to get the project set up.
Run it and click on a link in the first report to go to the second report.
Click the arrow for page 2 of the second report.
Notice how it takes you back to page 2 of the first report (this doesn't happen when you are in preview mode in the Reporting Services project and I don't believe it does this in a smart client application).
Click on a link in the first report to go back to the second report.
Click the arrow for page 2.
Notice how it takes you to page 2 of the second report.
Here is a link with source code and a more detailed explanation: http://geekswithblogs.net/robz/archive/2007/11/21/Reporting-Services-2005-BUG-Report-Linking-and-Paging---ASP.NET.aspx
So what I am looking for is both a workaround for now and if this is determined to be a bug, to be fixed in the next service pack.
Hi All,
Is there any way to remove the My Subscription,Site Setting links on the main page in Report manager.And also our client wants SSRS reports to be seen by his customer over the internet.Anybody knows about this?
Any help will be appreciated.
Thanks
Anupama
I created a subreport1 with tablix.I created second subreport2 that has a tablix and one column chart and both are placed in a rectangle. No page break is applied to this rectangle. When I run the sub report, both tablix and Column chart are displayed on one page .
I created a main report and added Subreport 1 and Subreport 2 in 2 different rectangles. I set page break property of Rectangle(Subreport1) to End and no page break is applied to Rectangle of Subreport2.Â
When I run the main report, subreport1 is displayed in one page, subreport2 is displayed in 2 different pages.
If I execute multiple SqlCommands in a single .aspx, using a single SqlConnection, are all the commands part of the same transaction?
That is, if I say:
cmd1.CommandText = "UPDATE foo SET myVal = myVal - 1"
cmd2.CommandText = "SELECT myVal FROM foo"
cmd1.Connection = myConn
cmd2.Connection = myConn
myConn.Open()
cmd1.ExecuteNonQuery() ' decrement myVal
intResult = CInt(cmd2.ExecuteScalar()) ' select value of myVal
myConn.Close()
Do the UPDATE and the SELECT happen in the same transaction, or is it possible that someone else would have changed the value of myVal between these two calls?
I used the following reference code while creating this simple ASPX page with reportviewer control using VS 2005
http://www.tutorialsall.com/REPORTINGSVCS/WebFormsReportViewer-ReportServerCredentials/
ReportViewer is having following properties
ProcessingMode = "Remote",
ReportServerUrl = "/foldername/myreport
ReportPath = "http://report.mydomain.com/reports"
Even after using admin user we got the same problem
Please help
I get this error message when I try to connect to Reporting Services via the Management Studio.
I can see my machine listed in the Server Name > Browse For More > Local Servers dialogue. But no luck,
Ive tried:
Servername: localhost
Servername: DED1774 (the machine name)
Servername: localhost/reportserver
Servername: DED1774/reportserver
Servername: http://ded1774/reportserver (from the rsreportserver.config file
<UrlRoot>http://ded1774/reportserver</UrlRoot>)
I've Googled the error message and found postings for solutions, but none of these helped. Can anyone suggest some simple steps I can take to try to find the issue and get the connection working?
Thanks
I have created one reports but all the records are displaying on one page.find a solution to display the records page by page. I created the same report without group so the records are displaying in page by page.
View 3 Replies View RelatedHello I have a project that uses a large number of MS Data access pages created in Access 2003 and runs on MS SQL2005.
When I am on lets say my client, (first page in a series) data access page and I have completed the fields in the (DAP), I am directing my users to the next step of the registration process by means of a hyperlink to another Data access page in the same web but in a linked or sometimes different table.
I need to pass data entered /created on the first page to the next page and populate the next page with some data from the first page / table. (like staying on the client name and ID when i go to the next page)
I also need the first data access page to open and display a blank or new record. Not an existing record. I will also be looking to creata a drop down box as a record selector.
Any pointers in the right direction would be appreciated.
I am some what new to data access pages so a walk through would be nice but anything you got is welcome. Thanks Peter€¦
View 4 Replies View Related
When I created my website in Visual Studio 2008, I ended up with two databases. The one I created (Speedway.mdf), then VS2008 added a new one (aspnetdb) when I added membership data (roles, users..etc). Since the host I'm using charges for each database, I just want to move all my membership information into Speedway.mdf. I exported the tables from aspnetdb.mdf to Speedway.mdf, but now I don't know how to tell the site to look at Speedway.mdf to find the membership info?
View 6 Replies View RelatedI'm trying to send data from a table on SQL server to a DB2 table on the Main Frame and I get this error. Any ideas?
[IBM][CLI Driver][DB2]SQL0904N Unsuccessful execution caused by an unavailable resource. Reason code: "UPDATABLE WORKFILE", type of resource: "100", and resource name: "TEMP DATABASE". SQLSTATE=57011
Hi all,please see if some one can suggest a better approach for this.i need to move 5 million rows from one table to another.LoanID is the only clumn in Source tableSource table structure=========-->==============================loanID1122234=====================================target or detination table should look like this=========================================loanID Sqeuence_number_with_in_LoanID1 11 22 12 22 33 14 1=========================================this is what i have tried so far1)there are about 4 & 1/2 million out of 5 million which will appearonly once (this is one tine load) in source table.so if i do this-----------sleect loanIDfrom SourceTablegroup by loanIDhaving count(*)=1and then i will hard code Sqeuence_number_with_in_LoanID to 1 .becausei know they will only come once.this is set based operation so this isfast.2)now,problem is with remainder of the 1/2 million rows.i had to use cursor for this which is very-very slow.other option i was thinking of is to pull it in the front end(.net)and do it there.i am hoping that will be faster.Database i am working on is sql server 2000.if some could suggest me some better approach of handling thisremainder1/2 milion rows.thanks in advance-sidd
View 4 Replies View RelatedHi
Im new to the world of sql server
I gonna write some t-sql stored procedures,and need to log error information in a database table, but don't want that log entry to be a part of the logical transaction.
So basically i want to
suspend the main transaction, perform SQL operations , commit or rollback those operations, and resume the main transaction.
Any ideas ?
Cheers
The following objects are placed on the Report body of the Report pane of SQL Server 2005 Reporting Services :
<textbox: expression1>
<textbox: expression2>
<table:table1 with at least 30 columns and 30 expressions>
<textbox: string1> - considered as the Title in the Footer section of the report
<texbox:string2> <textbox:expression3>
<textbox:string3> <textbox:expression4>
<textbox:string4> <textbox:expression5>
<textbox:expression6>
I can't find any explanation why is it string1 and string 2 of the footer section of my report displayed separately from the expression3 which is aligned on it and the rest of the object on the second page.
The expected design is that all Footer items should be displayed together of whether it is placed on the first page or on the last page.
As a workaround of this, I converted string 1 into an expression (Added = and enclosed the string with double quote).. As a result, all of the items in the Footer section are now placed together on the last page of the report.
I also remember one of the issue I encountered before where the Footer items where placed together on the first page and still have space at the bottom of the page, but then expression 6 is forced to display (alone) on the last page of my report.
I can't find any discussion related to this, I wish somebody could give me an idea why RS behaved like this.
Thanks in advance
Fit an intere table in same page without page break for save the excel export.
My table has a Group for order my dates.
I need to have the intere table in the same page, i don't care about blank space at the end of the page.
I can't use the page break beacuse i need an excel export in a unique sheet..
I have tested.. every page break..you'll have a different sheet in your excel export
I need something like this
page 1
Zone
1
2
3
4
5
6
7
7
8
9
..
page 2
Zone
1
2
3
4
5
6
7
7
8
9
..
but an unique sheet in the excel export
Hello,
If I have a report that includes a page header, the report viewer will render the report at the full width, but if I hide the page header and show only the body it will use the absolute width of the report.
I have a 7" wide report, with .75" borders set on each side.
Interactive & Print size are set to 8.5x11
Changing these sizes has no effect on the behavior of the viewer, which appears to ignore them.
When I view this report in the local viewer the contents fill the window if there is no page header.
If I enable the page header then the report is drawn at 8.5" wide, leaving a _big_ white border on the right side.
Any comments or workarounds that anyone knows? I know the local viewer is not a standard configuration (at least it seems) but it is what we need to use.Thanks,//Andrew
Hi, I wanted to know that can we access a webpagefrom a store procedure in sql server 2000 like we run a exe file from sql server. Bye.
View 1 Replies View Related
Hi,
I issued this command on Tempdb but it doesnot shrink the file.
dbcc shrinkfile (tempdev_3,1)
go
Messages:
-----------------------------------------------------------------------------------------------------------
DBCC SHRINKFILE: Page 4:11283400 could not be moved because it is a work table page.
-----------------------------------------------------------------------------------------------------------------------------------------------
I have checked that there are no tables associated with any user in tempdb. Any help is appreciated.
Regards,
Razi
How can I print a field that is in the dataset on each page? I added a textbox in the Page Header and use =Fields!ProjectName.value in the value property. I got an error "Fields cannot used in page header and footer."
How can I have the table header shows on each page? Currently if the data goes to the second page, there is no table header.
Thanks.
DanYeung
Hi Team,
When i view the Report from SSRS Report preview Tab it's working fine, But when i deploy that and try to view in the IE
I am seeing the Body background color in between the image and page border of the page footer how to solve that?
Hi All,
In my SSRS report. I have a report which has only one page. In preview it is showing as only 1 page but when I am printing the report. I am getting two printouts with the second page as a blank.. Please help me in printing the page that contains report. Intially I used a Page header, at that it used to print the blank page with a header only. Now as I removed the header it is printing the page without header i.e Blank Page.. So please help me in prinitng a single page that has the report. It is urgent,..
Thanks
dotnetdev1
I have a report with multiple tables. I need to show each tables in different pages. When there is no data for tables/tables , it is coming with the next table which has data. I have given "Add a page break after" option in the tablix but still the tables are coming together when no data available. How can I show it in different page?
View 2 Replies View RelatedI have a report with tablix. when tablix returns no rows Footer is coming all the way up . How to display the footer at the bottom of the page all time.
View 0 Replies View RelatedHow do I add a hard page break in the middle of a two page report? I use Microsoft reports for windows.
View 5 Replies View Related In SRSS 2005 (SP2) my page header seems to take up the same amount of space on the
1st page it would take if it were to print; I have PRINT ON FIRST PAGE set to
false - the header doesn't print - it just leaves the same amount of space.
How do you get the report to ignore that. I do have a report header built
into the body of my report. I have tested this by increasing the size of my
page header and it does move the report up or down on the 1st page by that
amount.
I'm hoping that someone can shed some light on this for me... I'm using SSRS SP2 and I have a basic report using a single list object which, at the moment, should print only two pages based on the results of the underlying query. When previewing the report, it shows the two pages. But when the report is printed or exported, there is a blank page before each report page.
What I've done so far:
1) Verified the properties of the list object and made sure that 'Insert a page break before this list' is not checked
2) Ensured that there are no hidden objects that could be causing this behavior
3) Ensured that the report size + margins are within the boudaries of an standard 8.5x11 paper size
Any suggestions on something that would solve this issue?
Sam
Hi,
I'm on a team that is developing a site in PHP / MySQL. We've been asked by the client to convert the database over to MSSQL. I've never used MSSQL, but after looking at the syntax available on php.net, there really isn't all that much difference in doing basic queries. I was wondering if any of you MSSQL gurus knew of some major differences between MySQL and MSSQL that I may be overlooking.
Anything, however basic or complex, would be helpful.
Thanks in advance,
Taylor
I have created several reports using SSRS which is installed in my local machine. But source data base is in the main server. Data source connection works properly. Report manager is also configured to local machine.
Now I tried to deploy these reports to main server. So I changed the target URL to http://mainservername/reportsserver in the internal report property change box. But it was not succeeded. I get a error message like this.
------ Build started: Project: Partner Reports -Internal, Configuration: Production ------
Build complete -- 0 errors, 0 warnings
------ Deploy started: Project: Partner Reports -Internal, Configuration: Production ------
Deploying to http://derby/ReportServer
Error rsRPCError : The report server cannot decrypt the symmetric key used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. Check the documentation for more information. (rsReportServerDisabled)
Deploy complete -- 1 errors, 0 warnings
========== Build: 1 succeeded or up-to-date, 0 failed, 0 skipped ==========
========== Deploy: 0 succeeded, 1 failed, 0 skipped ==========
Reporting services was already installed in main server. Do I have to change settings of report configuration manager in my local machine?
Hello All,
I have 4 subreports that I need to display in the main report. I can pull a sub-report with in the main report howevere the subreport doesn't display any data. It just gives me a blank template like:
Customer name Customer # Address 1 Address2 city
The subreport itself is not empty when I open it otherwise it shows me a list of all the customers however, no data when I call it as a part of main report.
Can anyone suggest me on this one?
Thanks,
Rashi
I have constructed my main report using the table item from the toolbox. In maintable I have two groupings.
In the maintable I have grouping2 set for a page break after each grouping.
I have set the subreport parameter to the field value of the maintable grouping2.
I want to display the contents of the subreport after grouping1 of the maintable on the same page.
I have achieved a result by placing the subreport in maintable_group2 footer. However when I save it as an excel sheet it says "Subreports within table/matrix cells are ignored".
I really don't like how the report displays like this in the report server however I will need to export this report to excel.
Have I explained my issue well enough?
Hi, all here, I am having a question about stored procedures for data mining. What are the main benefits of stored procedures for data mining? (what stored procedures can do for data mining on sql server 2005? when they are useful for data mining?).
Could please any expert here give me any guidance for that? Thanks a lot in advance.
With best regards,
Yours sincerely,