With out any BEGIN Transaction statement , i ran a update query.
I had to update just one record using the "Where field='abc'"
But i happened to miss that. Is there any chance of recovery? can i use the transaction logs to bring back the records before the update?
A quick answer is appreciated.
Sahel
Hello,
I am trying to insert records in a table say "TableB"
from "TableA". If a record does not exist in Tableb
then and then insert record from tableA.
as of now my query is
insert tableB
select * from tableA
where id not in(select id from tableB).
I am working with about 200000 records. This query is taking too long. Does any one have a better suggestion.
Thanx for your time.
Hiku
Excuse me for not putting a better name to this but I cannot think of asuitable subject title!anyway, here's what I am trying to doAt work we have a fair amount of data that is to do with people and whatjobs they have completed and at what dateso for exampleJoe Bloggs did design work at 12/12/2004 and spent 5 hours on it.Now, we have a lot of jobs that people haven't put any hours down for atall,and I want to find all those jobs which have had no hours put to them sincethe 30/09/2004I had written a query like soSELECT name, job, dateFROM tableWHERE hours = 0 AND date >='30/09/2004'But this doesn't work as some jobs may come up which have had zero hours onsome particular dates but on some dates that job does have hours on.What I want is to show since 30/09/2004 any jobs which have had no hours atall booked to them consistently.So in effect all the jobs we know longer use and haven't since that date.How would I do that?I know you can probably only give me a vague idea as I have provided notable structure etc.. but I only want a hint really...ThanksJayne
View 2 Replies View RelatedHi experts,
what is the scope of # and what is the scope of @
create table #temp(COLUMN01 VARCHAR(500))
DECLARE @TEMP TABLE(COLUMN01 VARCHAR(500))
thanks in advance
Vinod
Even you learn 1%, Learn it with 100% confidence.
Please Help!
What is wrong with this procedure!
Why it doesn't sum the fields Obshta_suma and Pay
Why it doesn't return @Obshta_suma and @PayCREATE PROCEDURE dbo.Nalichni
@Date1 varchar(12),
@Date2 varchar(12),
@Obshta_Suma decimal output,
@Pay decimal output,
@prmO_PKO bit output,--boolean 0-false, 1-true
@prmO_RKO bit output--boolean 0-false, 1-true
AS
set @prmO_PKO = 0
set @prmO_RKO=0
if exists(Select Obshta_suma from PKO where Obshta_suma<>Null and (Vnos_Data >= @Date1) and (Vnos_Data <=@Date2))
begin
set @prmO_PKO=1
Select @Obshta_Suma=sum(Obshta_Suma) from PKO where (Vnos_Data >= @Date1) and (Vnos_Data <=@Date2)
end
if exists(Select Data,Pay from RKO where Pay<>Null and ( Data >= @Date1 and Data <=@Date2))
begin
set @prmO_RKO=1
Select @Pay= sum(Pay) from RKO where( Data >= @Date1) and( Data <=@Date2)
end
GO
I am trying to create a new table containing a subset in an existing table using SELECT INTO, but I get the error:
Msg 208, Level 16, State 1, Line 1
Invalid object name 'MyDb.MyDestSchema.MyDestTable'.
What am I doing wrong? Here's the SQL statement:
SELECT t2.* INTO [MyDb].[MyDestSchema].[MyDestTable]
FROM [MyDb].[MySrcSchema].[MySrcTable] t2
LEFT JOIN [MyDb].[MyDestSchema].[MyDestTable] t1
ON t2.[DateTime] = t1.[DateTime]
WHERE (t1.[DateTime] IS NULL) AND
(convert(varchar, t2.[DateTime],126) BETWEEN '2006-11-01T08:30:00' AND '2006-12-31T15:30:00') AND
(convert(varchar, t2.[DateTime],114) BETWEEN '2006-11-01T08:30:00' AND '2006-12-31T15:30:00')
ORDER BY t1.[DateTime];
I have an excercise:
SET @UserID = @@ROWCOUNT
it is said that there is mistake, nad to complete it there i no need of knowledge mssql? So where is mistake?
Hi,
I was opening a web page, that has a grid view representing the records of a table, I updated a record of the sql table by mistake, but I am not sure which record,
is there any way in Sql server to get the last record just updated few minutes ago. I hyave admin permissions on the DB.
Also, is there a way to know the value that was just there before the changes?
Thanks a lot.
Hi.I deleted a stored procedure (one I had written) out of the master database. Ithought I had accidentally put it there, then I got to thinking.. what if itis normally reflected there, and maybe I should not of deleted it.So.. my question.. is it normal for procedures in other databases to bereflected also in the master database, and then how can I restore / recoverthe master database if necessary.I am using sql server 2005 on XP pro.thanks for the adviceJeff Kish
View 3 Replies View RelatedI have a correction to my previous thread all values are '83' not '80' My mistake
Message as it should be:
am new to SQL.
MY issue: Table (A) has the customerID field as a primary key. Table(b) has a customerID field but isn't the primary key. I am selecting all records from Table(A) and Table(B) Where Table(A).customerID=83 AND Table(B).customerID=83.
Table(A) has the customerID '83' Table(B) doesn't. The int 83 doesn't exist in table(B)
The various joins I constructed always returns (0 row(s) affected). When I enter a value that is inboth tables I get the desired result.
MY Goal:
I would like one record returned from table(A) if the customerID is not present in table(B) and one record that has a single customerID in both table(A)and Table(B)
Please advise.
Thanks
Can I restore records from a MSDE2000 Database
I copied some stored procedure from other database but unfortunately, I drop all records
I have checked the Transaction Log which is only 1024 KB
I have used Red Gate Log Resure but cannot find the log
Anyone can Help!!!!!
Thanks
Hi,
I was opening a web page, that has a grid view representing the records of a table, I updated a record of the sql table by mistake, but I am not sure which record,
is there any way in Sql server to get the last record just updated few minutes ago. I hyave admin permissions on the DB.
Also, is there a way to know the value that was just there before the changes?
Thanks a lot.
Hi,
I accidentally unclicked the check-boxes for group-header and group footer - I meant to leave the group header in. Now, I can't get to the group to edit it! Is there any way I can get back to it?
I €˜d like to discus with you the following REAL enough disaster scenario:
1. The TEST database is in the FULL backup mode.
2. WE have a full TEST DB backup and all tr. log backups.
3. DBA moved TEST database OFFLINE for maintenance operations.
4. MDF file for TEST DB was removed by mistake.
5. TRANSACTION LOG (LDF) file is OK.
6. DBA want to recover database to the point of failure.
According with MS SQL Server 2000 documentation it is possible.
We need to backup the transaction log , BUT I CANNOT DO THIS.
PLEASE, HELP.
In the same time, I can make LDF backup and recover database to the point of failure, if database is online and I stop/start SQL Server to remove MDF file.
I want to use SSB as a mean to thread multiple SP invocation of the same procedure.
When I launched the initator processes it created in the transmission queue error messages saying for each of them that it is an invalid target service name.
The view (sys.transmission_queue) records them in this way in the status column:
"The target service name could not be found. Ensure that the service name is specified correctly and/or the routing information has been supplied."
Services and queues and activation procedure are all defined into the same database.
I drop services and queues, and i tried to create a service with the initial wrong name. Nothing happened.
Thanks vour your help
What's up with this?
This takes like 0 secs to complete:
update xxx_TableName_xxx
set d_50 = 'DE',modify_timestamp = getdate(),modified_by = 1159
where enc_id in
('C24E6640-D2CC-45C6-8C74-74F6466FA262',
'762E6B26-AE4A-4FDB-A6FB-77B4782566C3',
'D7FBD152-F7AE-449C-A875-C85B5F6BB462')
but From linked server this takes 8 minutes????!!!??!:
update [xxx_servername_xxxx].xxx_DatabaseName_xxx.dbo.xxx_TableName_xxx
set d_50 = 'DE',modify_timestamp = getdate(),modified_by = 1159
where enc_id in
('C24E6640-D2CC-45C6-8C74-74F6466FA262',
'762E6B26-AE4A-4FDB-A6FB-77B4782566C3',
'D7FBD152-F7AE-449C-A875-C85B5F6BB462')
What settings or whatever would cause this to take so much longer from the linked server?
Edit:
Note) Other queries from the linked server do not have this behavior. From the stored procedure where we have examined how long each query/update takes... this particular query is the culprit for the time eating. I thought it was to do specefically with this table. However as stated when a query window is opened directly onto that server the update takes no time at all.
2nd Edit:
Could it be to do with this linked server setting?
Collation Compatible
right now it is set to false? I also asked this question in a message below, but figured I should put it up here.
I am hoping someone can shed light on this odd behavior I am seeing running a simple UPDATE statement on a table in SQL Server 2000. I have 2 tables - call them Table1 and Table2 for now (among many) that need to have certain columns updated as part of a single transaction process. Each of the tables has many columns. I have purposely limited the target column for updating to only ONE of the columns in trying to isolate the issue. In one case the UPDATE runs fine against Table1... at runtime in code and as a manual query when run in QueryAnalyzer or in the Query window of SSManagementStudio - either way it works fine.
However, when I run the UPDATE statement against Table2 - at runtime I get rowsaffected = 0 which of course forces the code to throw an Exception (logically). When I take out the SQL stmt and run it manually in Query Analyzer, it runs BUT this is the output seen in the results pane...
(0 row(s) affected)
(1 row(s) affected)
How does on get 2 answers for one query like this...I have never seen such behavior and it is a real frustration ... makes no sense. There is only ONE row in the table that contains the key field passed in and it is the same key field value on the other table Table1 where the SQL returns only ONE message (the one you expect)
(1 row(s) affected)
If anyone has any ideas where to look next, I'd appreciate it.
Thanks
Hi SQL fans,I realized that I often encounter the same situation in a relationdatabase context, where I really don't know what to do. Here is anexample, where I have 2 tables as follow:__________________________________________ | PortfolioTitle|| Portfolio |+----------------------------------------++-----------------------------+ | tfolio_id (int)|| folio_id (int) |<<-PK----FK--| tfolio_idfolio (int)|| folio_name (varchar) | | tfolio_idtitle (int)|--FK----PK->>[ Titles]+-----------------------------+ | tfolio_weight(decimal(6,5)) |+-----------------------------------------+Note that I also have a "Titles" tables (hence the tfolio_idtitlelink).My problem is : When I update a portfolio, I must update all theassociated titles in it. That means that titles can be either removedfrom the portfolio (a folio does not support the title anymore), addedto it (a new title is supported by the folio) or simply updated (atitle stays in the portfolio, but has its weight changed)For example, if the portfolio #2 would contain :[ PortfolioTitle ]id | idFolio | idTitre | poids1 2 1 102 2 2 203 2 3 30and I must update the PortfolioTitle based on these values :idFolio | idTitre | poids2 2 202 3 352 4 40then I should1 ) remove the title #1 from the folio by deleting its entry in thePortfolioTitle table2 ) update the title #2 (weight from 30 to 35)3 ) add the title #4 to the folioFor now, the only way I've found to do this is delete all the entriesof the related folio (e.g.: DELETE TitrePortefeuille WHERE idFolio =2), and then insert new values for each entry based on the new givenvalues.Is there a way to better manage this by detecting which value has to beinserted/updated/deleted?And this applies to many situation :(If you need other examples, I can give you.thanks a lot!ibiza
View 8 Replies View RelatedThe Folowing code is not working anymore. (500 error)
Set objRS = strSQL1.Execute
strSQL1 = "SELECT * FROM BannerRotor where BannerID=" & cstr(BannerID)
objRS.Open strSQL1, objConn , 2 , 3 , adCmdText
If not (objRS.BOF and objRS.EOF) Then
objRS.Fields("Exposures").Value =objRS.Fields("Exposures").Value + 1
objRS.update
End If
objRS.Close
The .execute Method works fine
strSQL1 = "UPDATE BannerRotor SET Exposures=Exposures+1 WHERE BannerID=" & cstr(BannerID)
objConn.Execute strSQL1
W2003 + IIS6.0
Pls advice?
If I have a table with 1 or more Nullable fields and I want to make sure that when an INSERT or UPDATE occurs and one or more of these fields are left to NULL either explicitly or implicitly is there I can set these to non-null values without interfering with the INSERT or UPDATE in as far as the other fields in the table?
EXAMPLE:
CREATE TABLE dbo.MYTABLE(
ID NUMERIC(18,0) IDENTITY(1,1) NOT NULL,
FirstName VARCHAR(50) NULL,
LastName VARCHAR(50) NULL,
[Code] ....
If an INSERT looks like any of the following what can I do to change the NULL being assigned to DateAdded to a real date, preferable the value of GetDate() at the time of the insert? I've heard of INSTEAD of Triggers but I'm not trying tto over rise the entire INSERT or update just the on (maybe 2) fields that are being left as null or explicitly set to null. The same would apply for any UPDATE where DateModified is not specified or explicitly set to NULL. I would want to change it so that DateModified is not null on any UPDATE.
INSERT INTO dbo.MYTABLE( FirstName, LastName, DateAdded)
VALUES('John','Smith',NULL)
INSERT INTO dbo.MYTABLE( FirstName, LastName)
VALUES('John','Smith')
INSERT INTO dbo.MYTABLE( FirstName, LastName, DateAdded)
SELECT FirstName, LastName, NULL
FROM MYOTHERTABLE
hi need help how to send an email from database mail on row update
from stored PROCEDURE multi update
but i need to send a personal email evry employee get an email on row update
like send one after one email
i use FUNCTION i get on this forum to use split from multi update
how to loop for evry update send an single eamil to evry employee ID send one email
i update like this
Code Snippet
:
DECLARE @id nvarchar(1000)
set @id= '16703, 16704, 16757, 16924, 17041, 17077, 17084, 17103, 17129, 17134, 17186, 17190, 17203, 17205, 17289, 17294, 17295, 17296, 17309, 17316, 17317, 17322, 17325, 17337, 17338, 17339, 17348, 17349, 17350, 17357, 17360, 17361, 17362, 17366, 17367, 17370, 17372, 17373, 17374, 17377, 17380, 17382, 17383, 17385, 17386, 17391, 17392, 17393, 17394, 17395, 17396, 17397, 17398, 17400, 17401, 17402, 17407, 17408, 17409, 17410, 17411, 17412, 17413, 17414, 17415, 17417, 17418, 17419, 17420, 17422, 17423, 17424, 17425, 17426, 17427, 17428, 17430, 17431, 17432, 17442, 17443, 17444, 17447, 17448, 17449, 17450, 17451'
UPDATE s SET fld5 = 2
FROM Snha s
JOIN dbo.udf_SplitList(@id, ',') split
ON split.value = s.na
WHERE fld5 = 3
now
how to send an EMAIL for evry ROW update but "personal email" to the employee
Code Snippet
DECLARE @xml NVARCHAR(MAX)DECLARE @body NVARCHAR(MAX)
SET @xml =CAST(( SELECT
FirstName AS 'td','',
LastName AS 'td','' ,
SET @body = @body + @xml +'</table></body></html>'
EXEC msdb.dbo.sp_send_dbmail
@recipients =''
@copy_recipients='www@iec.com',
@body = @body,
@body_format ='HTML',
@subject ='test',
@profile_name ='bob'
END
ELSE
print 'no email today'
TNX
Hello,I am trying to update records in my database from excel data using vbaeditor within excel.In order to launch a query, I use SQL langage in ADO as follwing:------------------------------------------------------------Dim adoConn As ADODB.ConnectionDim adoRs As ADODB.RecordsetDim sConn As StringDim sSql As StringDim sOutput As StringsConn = "DSN=MS Access Database;" & _"DBQ=MyDatabasePath;" & _"DefaultDir=MyPathDirectory;" & _"DriverId=25;FIL=MS Access;MaxBufferSize=2048;PageTimeout=5;" &_"PWD=xxxxxx;UID=admin;"ID, A, B C.. are my table fieldssSql = "SELECT ID, `A`, B, `C being a date`, D, E, `F`, `H`, I, J,`K`, L" & _" FROM MyTblName" & _" WHERE (`A`='MyA')" & _" AND (`C`>{ts '" & Format(Date, "yyyy-mm-dd hh:mm:ss") & "'})"& _" ORDER BY `C` DESC"Set adoConn = New ADODB.ConnectionadoConn.Open sConnSet adoRs = New ADODB.RecordsetadoRs.Open Source:=sSql, _ActiveConnection:=adoConnadoRs.MoveFirstSheets("Sheet1").Range("a2").CopyFromRecordset adoRsSet adoRs = NothingSet adoConn = Nothing---------------------------------------------------------------Does Anyone know How I can use the UPDATE, DELETE INSERT SQL statementsin this environement? Copying SQL statements from access does not workas I would have to reference Access Object in my project which I do notwant if I can avoid. Ideally I would like to use only ADO system andSQL approach.Thank you very muchNono
View 1 Replies View RelatedIt appears to update only the first qualifying row. The trace shows a row count of one when there are multiple qualifying rows in the table. This problem does not exist in JDBC 2000.
View 5 Replies View RelatedI'm having a strange problem that I can't figure out. I have an SQL stored procedure that updates a small database table. When testing the Stored Procedure from the Server Explorer, it works fine. However, when I run the C# code that's supposed to use it, the data doesn't get saved. The C# code seems to run correctly and the parameters that are passed to the SP seem to be okay. No exceptions are thrown.
The C# code:
SqlConnection conn = new SqlConnection(ConfigurationManager.ConnectionStrings["touristsConnectionString"].ConnectionString);
SqlCommand cmd = new SqlCommand("fort_SaveRedirectURL", conn);
cmd.CommandType = CommandType.StoredProcedure;
Label accomIdLabel = (Label)DetailsView1.FindControl("lblID");
int accomId = Convert.ToInt32(accomIdLabel.Text);
cmd.Parameters.Add("@accomId", SqlDbType.Int).Value = accomId;
cmd.Parameters.Add("@path", SqlDbType.VarChar, 250).Value = GeneratePath();
try
{
conn.Open();
cmd.ExecuteNonQuery();
}
catch(Exception ex)
{
throw ex;
}
finally
{
conn.Close();
}
The Stored Procedure:
ALTER PROCEDURE developers.fort_SaveRedirectURL
(
@accomId int,
@path varchar(250)
)
AS
DECLARE
@enabled bit,
@oldpath varchar(250)
/* Ensure that the accommodation has been enabled */
SELECT @enabled = enabled FROM Experimental_Accommodation
WHERE Experimental_Accommodation.id = @accomId
IF (@enabled = 1)
BEGIN
/* Now check if a path already exists */
SELECT @oldpath = oldpath FROM Experimental_Adpages_Redirect
WHERE Experimental_Adpages_Redirect.accom_id = @accomId
IF @oldpath IS NULL
BEGIN
/* If Path already exists then we should keep the existing URL */
/* Otherwise, we need to insert a new one */
INSERT INTO Experimental_Adpages_Redirect
(oldpath, accom_id)
VALUES (@path,@accomId)
END
END
RETURN
I'm new to this forum.
This 'problem' has occured many times, but I've always found a way around it.
I have pages with datagrids, in which a user can edit a certain fields and then update the tables with new data. Lets say when a user edit a Name field and a money field. If he/she left those two fields blank, the table is automatically updated with a <null> (for the name field) and a 0 (for the money field.) Both these columns were set up to allow Null values.
Anyone has an idea why they were updated that way? And is there like a standard on how the data types are updated if a field is left blank?
Thank you very much.
hi,friends
we show record from multiple table using single 'selectcommand'.
like....
---------
select *
from cust_detail,vend_detail
---------
i want to insert value in multiple database table(more than one) using single 'insert command'.
is it possible?
give any idea or solution.
i want to update value in multiple database table(more than one) using single 'update command'
i want to delete value in multiple database table(more than one) using singl 'delete command'
it is possible?
give any idea or solution.
it's urgent.
thanks in advance.
I do realize that his could be posted in a few spots but I think the answer is in the SQL.
I have a ASP.NET page, with a SqlDataSource, Text Box and Calendar Controls. I have the textbox and calendar controls eval'ed to the same sql data source DateTime Field. The text box is formatted eval to small time and the calendars eval has no formatting.
ex:
<asp:TextBox ID="START_TIME" Text='<%# Eval("EVENT_START","{0:t}") %>' runat=server Width=200></asp:TextBox>
I want to merge the two controls; one has the date the other has the time when I update the pages data to the SqlDataSource field EVENT_START. I've tried a couple of methods, but I would like some other opinions. As Sql server only supports date and time together I am storing the two together.
I could merge the two together in the code behind on the update button's event handler or merge the two during the update query using parameters.
Not that I could get an illegal date for the calendar control, but I could get garbage from the textfield time. So I still would have to do validation on the text field before the SQL server could do the update.
There's a few ways to go about this, so I was wondering if anyone else has figured out an elegant way to handle it.
wbochar
I want to update two tables in one page. So I created two FormView bound on two SqlDataSource controls, and I create a Update button on the bottom of page. And I writen some codes as below:
btnUpate_Click(object sender, EventArgs e){
sqlDataSource1.Update();
sqlDateSource2.Update();}
But, the records haven't updated.
In SqlDataSource2_Updating() function, I found all the parameters is null.
So, how to modify my code to do it.
Zhang
hi!
I have a big problem. If anyone can help.
I want to retrieve the last update time of database. Whenever any update or delete or insert happend to my database i want to store and retrieve that time.
I know one way is that i have to make a table that will store the datetime field and system trigger / trigger that can update this field record whenever any update insert or deletion occur in database.
But i don't know exactly how to do the coding for this?
Is there any other way to do this?
can DBCC help to retrieve this info?
Please advise me how to do this.
Thanks in advance.
Vaibhav
I have a table where table row gets updated multiple times(each column will be filled) based on telephone call in data.
Â
Initially, I have implemented after insert trigger on ROW level thinking that the whole row is inserted into table will all column values at a time. But the issue is all columns are values are not filled at once, but observed that while telephone call in data, there are multiple updates to the row (i.e multiple updates in the sense - column data in row is updated step by step),
I thought to implement after update trigger , but when it comes to the performance will be decreased for each and every hit while row update.
I need to implement after update trigger that should be fired on column level instead of Row level to improve the performance?
Hello,
I'm writing a fairly involved stored procedure. In this Stored Procedure, I have an update statement, followed by a select statement. The results of the select statement should be effected by the previous update statement, but its not. When the stored procedure is finish, the update statement seemed to have worked though, so it is working.
I suspect I need something, like a GO statement, but that doesnt seem to work for a stored procedure. Can anyone offer some assistance?
Hello
I have interesting situation with one of my update statement.
Update takes 2 min to run and usually updates 20000 rows.
However lately update executes for longest time - 10 hours.
After I reindex table the updates run fine again
Please advice what can cause this
I do not think reindexing table before every update is good idea
We are running SQL 2000 SP4, Windows 2003 Server
Thank you in advance for all your help
Armine
Hi! Select gets all records that contains illegal chars... Ok, to replace '[' { and some other chars I will make AND '% .. %' and place other intervals, that is not the problem.The problem is: How to replace not allowed chars ( ! @ # $ % ^ & * ( ) etc. ) with '_' ?I have seen that there is a function REPLACE, but can't figure out how to use it. 1 SELECT user_username
2 FROM users
3 WHERE user_username LIKE '%[!-)]%';