I Want Storedprocedure For This Requirment Am Passing One UserId Parameter
May 21, 2008
My Required tables are
I am Passing one parameter Is UserID
Table Name : SC_Attendence
ColumnName Datatype
AttendanceID int
CompanyID int
AttendanceDate datetime
SectionID int
Table Name : SC_AttendenceDetails
Columnname Datatype
AttendanceDetailID int
AttendanceID int
UserID int
IsAttended bit
IsLate bit
Table : SC_UserSections
columnname Datatype
UsersSectionId int
UserId int
SectionId int
CreatedDate datetime
Month NoofAttendenceDays NoofPresentdays
January 25 21
Febrauary 22 19
March 25 22
Thanx in advance It's very urgent
View 2 Replies
ADVERTISEMENT
Jul 2, 2007
I had thought that this was possible but I can't seem to figure out the syntax. Essentially I have a report where one of the parameters is populated by a stored procedure.
Right now this is easily accomplished by using "exec <storedprocname>" as the query string for the report parameter. However I am not clear if it is possible to now incorporate User!UserID as parameter to the stored procedure. Is it? Thanks
View 1 Replies
View Related
Mar 25, 2008
Hi to all , I wrote a stiored procedure like below SET ANSI_NULLS ONGOSET QUOTED_IDENTIFIER ONGOALTER PROCEDURE SELET_AND_RETURN ( @opId Nvarchar(50) output)ASBEGIN SET NOCOUNT ON; SELECT @opId = NAME FROM TABLE1 PRINT @opId RETURN @opId;ENDGONow i include this procedure into my project, my problem is i dont know how to pass the output parameter from front end coding,
View 2 Replies
View Related
Apr 19, 2008
Halloi have a problem to send a parameter via QueryString to my storedProcedure.If i run the procedure in VisualWebDeveloper everything works fine, when i enter the parameter with the DialogBox: 1 ALTER PROCEDURE dbo.StoredProcedure2 2 @appart varchar(50)3 4 AS5 BEGIN6 7 SELECT category FROM immovables WHERE category = @appart 8 END9 /* SET NOCOUNT ON */ 10 RETURNThen i have a simple Page with a link <a href="Test.aspx?objtxt=34" target="_self">send</a> that send the QueryString to the Following Site: <%@ Page Language="VB" MasterPageFile="~/MasterPage.master" Title="Unbenannte Seite" %><asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server"> <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>" SelectCommand="StoredProcedure2" SelectCommandType="StoredProcedure" SortParameterName="objtxt"> <SelectParameters> <asp:QueryStringParameter Name="appart" QueryStringField="objtxt" Type="String" /> </SelectParameters> </asp:SqlDataSource> <asp:DetailsView ID="DetailsView1" runat="server" Height="50px" Width="125px" AutoGenerateRows="False" DataSourceID="SqlDataSource1"> <Fields> <asp:BoundField DataField="category" HeaderText="category" SortExpression="category" /> </Fields> </asp:DetailsView> </asp:Content> Now, when i run the application, i get the following message, when i fire up the Link:Für die Prozedur oder Funktion StoredProcedure2 wurden zu viele Argumente angegeben.I'm german so i get this message in german, tranlated: to many aguments wher passed to the procedure or funktion StoredProcedure2 I think the problem has thomething to do with the parameter deklaration in the storedProcedure.am I wrong?can somebody help me?Regards from Cologne (Germany) Caspar
View 5 Replies
View Related
Mar 17, 2007
When integrating SQL Reporting Services 2005 with Sharepoint Services 3.0, and you have a SRS report that runs over a view with the UserID as a parameter (to filter the records the user has access to), will the SharePoint ReportViewer passover the UserID to RS and RS to SQL?
Sharepoint security with Reporting Services stops at Item level or does it impersontate down to SQL? Should authenticating be Integrated or SQL ? Should the userid in SQL be exact match with Sharepoint? Or are they mapped somewhere?
Thank You!!
View 1 Replies
View Related
Apr 2, 2008
Hi,
I have started using SQL Server 2005 Reporting Services. I am using SQl Server authentication where user has to supply username and password .I want to know can I Pass the SQL authentication username and password in the URL as a parameter to report.
Nikhil Jahagirdar
View 1 Replies
View Related
Feb 9, 2008
Hi, I have created an insert stored procedure which inserts a userid into an sql server 2005 field of datatype uniqueidentifier.
What datatype would the parameter be in my c# code?
do i pass it in as an object datatype?
the code is below....
1 conn = new SqlConnection(ConfigurationManager.ConnectionStrings["LocalSqlServer"].ConnectionString);
2
3 cmd = new SqlCommand("spInsKeyswap_history", conn);
4
5 cmd.CommandType = CommandType.StoredProcedure;
6
7 MembershipUser mu = Membership.GetUser(User.Identity.Name);
8
9 object gdUserID = mu.ProviderUserKey;
10
11
12
13
14
15 cmd.Parameters.Add("@user_title", SqlDbType.VarChar, 50);
16
17 cmd.Parameters.Add("@first_name", SqlDbType.VarChar, 20);
18
19 cmd.Parameters.Add("@last_name", SqlDbType.VarChar, 50);
20
21 cmd.Parameters.Add("@email", SqlDbType.VarChar, 50);
22
23 cmd.Parameters.Add("@birthday", SqlDbType.VarChar, 15);
24
25 cmd.Parameters.Add("@alternate_number", SqlDbType.VarChar, 50);
26
27 cmd.Parameters.Add("@msisdn", SqlDbType.VarChar, 50);
28
29 cmd.Parameters.Add("@call1", SqlDbType.VarChar, 50);
30
31 cmd.Parameters.Add("@call2", SqlDbType.VarChar, 50);
32
33 cmd.Parameters.Add("@call3", SqlDbType.VarChar, 50);
34
35 cmd.Parameters.Add("@new_sim_msidn", SqlDbType.VarChar, 50);
36
37 cmd.Parameters.Add("@dealer_id", SqlDbType.UniqueIdentifier);
38
39 cmd.Parameters.Add("@status_code", SqlDbType.Int);
40
41 cmd.Parameters.Add("@support_id", SqlDbType.Int);
42
43 cmd.Parameters.Add("@return_value", SqlDbType.Int);
44
45 cmd.Parameters["@user_title"].Value = txtTitle.Text.ToString();
46
47 cmd.Parameters["@first_name"].Value = txtFirstName.Text.ToString();
48
49 cmd.Parameters["@last_name"].Value = txtLastName.Text.ToString();
50
51 cmd.Parameters["@email"].Value = txtEmailAddress.Text.ToString();
52
53 cmd.Parameters["@birthday"].Value = txtBirthday.Text;
54
55 cmd.Parameters["@alternate_number"].Value = txtAlternate.Text.ToString();
56
57 cmd.Parameters["@msisdn"].Value = txtNew.Text.ToString();
58
59 cmd.Parameters["@call1"].Value = txtCall1.Text.ToString();
60
61 cmd.Parameters["@call2"].Value = txtCall2.Text.ToString();
62
63 cmd.Parameters["@call3"].Value = txtCall3.Text.ToString();
64
65 cmd.Parameters["@new_sim_msidn"].Value = txtOld.Text.ToString();
66
67 //get logged in users user_id from membership
68
69 cmd.Parameters["@dealer_id"].Value = gdUserID;
70
71 cmd.Parameters["@status_code"].Value = 1;
72
73 cmd.Parameters["@support_id"].Value = 0;
74
75
76
77 cmd.Parameters["@return_value"].Direction = ParameterDirection.ReturnValue;
78
79 cmd.ExecuteNonQuery();
80
81 int returnValue = (int)cmd.Parameters["@return_value"].Value;
82
83 conn.Open();
84
85
86
View 1 Replies
View Related
Jul 29, 2015
I have two report , first is main report which is matrix and have one parameter User_ids which is multi value selection and my second report is basic chart of user_wise performance.
Now, my main report (matrix ) works fine for Multiple selection of users and i have putted one textbox on main report chart which has action properties set for chart report, when user click on chart button it must goes to chart with user selected in main report. Now , i have used expression for parameter to send it like ..
=join(parameter!user_id!value,",") which pass selected value to chart
And when I am selecting single user it passing that value to chart parameter list but , when it is more than one user it errors with conversion failed when converting the nvarchar value '121,128' to data type int. But my chart also works when passing 121,128 in user parameter in preview of report .
View 2 Replies
View Related
Dec 3, 2015
Using SQL Server 2008R2 and Report Builder 3.0..I have an action set in a text box of a table. My intent is to pass the value of that text box (which is variable) to a sub-report in a popup window. Here's my code: URL....The parameter of the report I'm trying to open is @SONum.I'm guessing my error is involved in the formatting of how the value of the parameter is being passed. I've also seen examples where the report server and report values were parameterized, but I don't know where to define
Parameters!ServerAddress.Value anywhere.Do I need to have something set up a certain way within the report I'm opening? Here's the report Parameter settings on the report I'm trying to open.
View 3 Replies
View Related
May 7, 2008
In my site, when a user registers, I need to create rows in additional tables besides aspnet_Users. So, I need to be able to pass the generated userId guid to subsequent SqlCommands. I'm having a terrible time with this. What's the correct way to set up a SqlParameter so that it will accept a guid? I keep getting this error: "Conversion failed when converting from a character string to uniqueidentifier."
I've tried creating the parameter both with and without a SqlDbType.
cmd.Parameters.AddWithValue(paramName, guid);
and
SqlParameter p = new SqlParameter(paramName);p.SqlDbType = SqlDbType.Guid;cmd.Parameters.Add(p);
and I get the same error either way.
Driving me nuts! Any help appreciated.
View 1 Replies
View Related
Jan 18, 2002
Hi,
I have a stored proc as follows:
Create stored procedure sp_test
@Cno nvarchar (1000) AS
SELECT * FROM Contracts WHERE Cno IN (@Cno)
How do I actually pass the parameters to the stored proc?
sp_test "'cn01','cn02','cn03','cn04'" doesn't work.
In VB.NET this doesn't work either:
dim s as string = "'cn01','cn02','cn03','cn04'"
cmd.parameters.add(new sqlparameter("@Cno",nvarchar,1000))
cmd.parameters("@Cno").value = s
I don't want to parse the string inside the proc and then Exec the parsed string.
TIA
Jeremy Holt
View 5 Replies
View Related
Apr 9, 2008
Hi ,
I have this situation,I need to store results of a Select Count(*) from TableA to a parameter and only if the value of the count(*) is greater than 50,000,a notification mail would be sent out to the table owner.Currently this is what I have done:
1) Use SQL task to include "Select Count(*) from TableA"
2) In parameter mapping tab of SQL Task, define the following
Parameter name : Table::Count
Direction: Input
Data Type: Numeric
Parameter Name : @Count
3) I have connected the SQL Task to a Send Mail Task [ Only If @count>50 000, then a mail should be sent out]
4) The constraints has been set as
Evaluation Operation : Expression and Constraints
Value: Success
Expression : @Count >"50000"
In SSIS tab > Variable
I have set the following
Variable Name : Count
DataType : Int32
Can someone advise me where I am going wrong, as when I execute the SQL Task turns greens and ends.Even when the count of tableA is greater than 50 000, no mails I sent out[send mail task does not get executed]
Thank You in Advance
View 12 Replies
View Related
Mar 18, 2008
how can i pass report parameter via URL?
my jump to URL link is:
http://itreportsme096/Reports/Pages/Report.aspx?ItemPath=%2fDevelopment%2fhoneylette%2fdetailed+phone+calls
and i want to pass two parameters: billingmonth and phoneno
how can i do that?
View 7 Replies
View Related
Jul 23, 2005
I have a stored procedure named "processInventory" like the following.Depending on the passed in parameters, I would like to add a WHEREclause for "select" action. For example, if any varchar type ofparameter is passed in, the where clause would use "LIKE" operator. Forexample, "Select * from Main where [s/n] like @Serial. All other typeswill use "=" operator. For example, "Select * from Main where MAKE =@Make and Type = @type".How could this be achieved? Thanks.CREATE PROCEDURE processInventory@Action varchar(7),@ControlNumber int = null,@AssetTag int = null,@Serial varchar(50) = null,@Description varchar(50) = null,@Make int = null,@Type int = null,@Model int = null,@Status int = null,@Networked bit = null,@LoginName varchar(50) = null,@Shared bit = null,@Org varchar(15) = null,@RecordDate datetime = null,@LastUpdate datetime = null,@ManufactureDate datetime = null,@Comment ntext = nullASdeclare @processError intset @processError = 0if @Action = 'Select' goto selectInventoryelseIf @Action = 'Update'beginif @ControlNumber = null return(1) --Required parameter value notspecifiedelsegoto updateInventoryendelseif @Action = 'Insert'beginif @Serial = null return(1) --Required parameter value notspecifiedelsegoto InsertInventoryendelseif @Action = 'Delete'beginif @ControlNumber = null return(1) --Required parameter valuenot specifiedelse goto deleteInventoryendselectInventory:if @Serial <> nullbeginselect * from Main where [S/N] like @Serialif @@Error<>0beginset @processError = @@Errorreturn @processErrorendendelseif @ControlNumber <> nullbeginselect * from Main where ControlNumber = @ControlNumberif @@Error <>0beginset @processError = @@Errorreturn @processErrorendendelseselect top 100* from MainupdateInventory:update MAINset [Org Asset Tag] = @AssetTag, [S/N] = @Serial, [Description]= @Description, Make = @Make, Type = @Type,Model = @Model, Status = @Status, Networked = @Networked,LoginName = @LoginName, Shared = @Shared,Org = @Org, [Date Of Record] = @RecordDate, [Date LastUpdated] = @LastUpdate, [Manuf Date] = @ManufactureDate,Comments = @Commentwhere ControlNumber = @ControlNumberif @@ERROR <> 0beginset @processError = @@ERRORreturn @processErrorendelsereturn(0) -- successful updateinsertInventory:insert MAIN([Org Asset Tag], [S/N], [Description], Make, Type,Model, Status, Networked, LoginName, Shared,Org, [Date Of Record], [Date Last Updated], [ManufDate],Comments)values(@AssetTag, @Serial, @Description, @Make, @Type, @Model,@Status, @Networked, @LoginName, @Shared,@Org, @RecordDate, @LastUpdate, @ManufactureDate,@Comment)if @@ERROR <> 0beginset @processError = @@ERRORreturn @processErrorendelse return(0) -- successful insertdeleteInventory:delete MAIN where ControlNumber = @ControlNumberif @@ERROR <> 0beginset @processError = @@ERRORreturn @processErrorendelse return(0) -- successful deleteGO
View 4 Replies
View Related
Jun 17, 2005
I don't understand how to pass a parameter to a dts package from another. In SQL 2000 you can map a variable with a variable of the package you will call.
View 10 Replies
View Related
May 11, 2006
Hi all
I need to pass parameters when I call a .SQL file.
Is there a way to do this in SQL Server?
thanks!!!!
View 5 Replies
View Related
Dec 21, 2006
Hi guys...
As of now I'm working on a certian report which needs to pass a certain parameter to another dataset... I'm refering to the dataset of the same report. Can anyone tell me how this is done? I really need to know it to finish my report...
Thanks a bunch in advance!
View 4 Replies
View Related
Jan 9, 2007
Request is to have a Requirement number from the requirement form generate a report in Reporting Services with the requirement number as a filter.
I can set up the parameter - how does the value get there? Should I be asking this question in the Visual C# group?
Thanks!
Terry B
View 1 Replies
View Related
Sep 14, 2006
My data table contains a column (a foreign key) with numbers from 0 and up. (it could be null or a number. I used ISNULL to convert it.) I want to be able to select in three ways. 1) equals zero (or is null)2) greater than zero (or is not null)3) equal to a specific number.How do I do this?My application setup is Presentation Layer, BLL, DAL and Sql Server.I don't want to create another Query because this is only part of a larger query with other parameters.If I could just do something like @IDOperator @IDValue in the Filter of the Sql it would be great.
View 2 Replies
View Related
Aug 9, 2004
Hello,
Can someone kindly point out what is wrong with the following code file. I'm trying to:
- fill a dropdown from a db on page load (this works!)
- when user selects from the list and hits a button, pass the dropdown value to a second query
- use the second query to make another call to the db and fill a data grid
In the code below, if I swap an actual value (eg '1005') into the command and comment out the .Parameter.Add statements, the dategrid is filled sucessfully. Otherwise, when the button is pressed, nothing is displayed.
Thanks
PS comments about my coding approach are welcome - I'm new to aspx...
<%@ Language="VBScript" Debug="true"%>
<%@ Import Namespace="System.Data" %>
<%@ Import Namespace="System.data.SqlClient" %>
<html>
<head>
<script language="vb" runat="server">
Dim dbConnection As SqlConnection
Dim ds_Teams,ds_Agents As DataSet
Dim sqlCmd_Teams,sqlCmd_Agents As SqlDataAdapter
Dim dbConn = "server=csacd01;uid=mpierce;pwd=cabledog;database=clearviewacd"
Dim sql_select_teams = "" & _
"SELECT team_no, team_name " & _
"FROM dbo.team " & _
"WHERE (team_status = 'Curr')"
Dim sql_select_agents = "" & _
"SELECT last_name + ', ' + first_name AS name, agent_no " & _
"FROM dbo.users " & _
"WHERE (team_no = @Team) AND (NOT (agent_no = '1029')) " & _
" AND (NOT (last_name IS NULL)) " & _
" AND (NOT (first_name IS NULL)) " & _
" AND (NOT (first_name = 'FirstName')) " & _
"ORDER BY last_name"
Dim teamList = "teamList"
Dim agentList = "agentList"
Sub Page_Load(Sender As Object, E As EventArgs)
if not (IsPostBack)
ds_Teams = new DataSet()
dbConnection = New SqlConnection(dbConn)
sqlCmd_Teams = New SqlDataAdapter(sql_select_teams, dbConnection)
sqlCmd_Teams.Fill(ds_Teams, teamList)
dbConnection.close()
dropdownlist_Teams.DataSource=ds_Teams.Tables(teamList).DefaultView
dropdownlist_Teams.DataBind()
end if
End Sub
sub Get_Agents(Sender As Object, E As EventArgs)
ds_Agents = new DataSet()
dbConnection = New SqlConnection(dbConn)
sqlCmd_Agents = new SqlDataAdapter(sql_select_agents, dbConnection)
sqlCmd_Agents.SelectCommand.Parameters.Add(new SqlParameter("@Team", SqlDbType.NVarChar,4))
sqlCmd_Agents.SelectCommand.Parameters("@Team").Value = dropdownlist_Teams.DataValueField
sqlCmd_Agents.Fill(ds_Agents,agentList)
dbConnection.close()
datagrid_Agents.DataSource=ds_Agents.Tables(agentList).DefaultView
datagrid_Agents.DataBind()
end sub
</script>
</head>
<body>
<form runat="server">
<asp:DropDownList id="dropdownlist_Teams" runat="server"
DataTextField="team_name"
DataValueField="team_no">
</asp:DropDownList>
<input type="submit" onserverclick="Get_Agents" value="Get Agents" runat="server"><br />
<ASP:DataGrid id="datagrid_Agents" runat="server"
Width="500"
BackColor="#ccccff"
BorderColor="black"
ShowFooter="false"
CellPadding=3
CellSpacing="0"
Font-Name="Verdana"
Font-Size="8pt"
HeaderStyle-BackColor="#aaaadd"
EnableViewState="false"
/>
</form>
</body>
</html>
View 1 Replies
View Related
Dec 17, 2005
Interesting problem, selecting and updating (with reference to a Form View) works great. Whenever I try to delete I get this error:Must declare the variable '@template_id'.
Description: An
unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the
error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Must declare the variable '@template_id'.
Here is my code:<asp:SqlDataSource ID="SqlTemplateDS" runat="server"SelectCommand="SELECT [template_id], [client_id], [language], [label], [email_default], [email_template], [event_template] FROM [CMT] ORDER BY [template_id]"DeleteCommand="DELETE FROM CMT WHERE (template_id = @template_id)" ConnectionString="<%$ ConnectionStrings:BrandMSConnectionString %>"> </asp:SqlDataSource><asp:GridView ID="grdTemplates" runat="server" AutoGenerateColumns="False" DataKeyNames="template_id" DataSourceID="SqlTemplateDS" Font-Names="Verdana" Font-Size="Small" ForeColor="Black" Width="100%" OnSelectedIndexChanged="grdTemplates_SelectedIndexChanged" CellPadding="2"> <Columns> <asp:BoundField DataField="template_id" HeaderText="ID" ReadOnly="True" SortExpression="template_id" /><asp:BoundField DataField="client_id" HeaderText="Client" SortExpression="client_id" /><asp:BoundField DataField="language" HeaderText="Language" SortExpression="language" /><asp:BoundField DataField="label" HeaderText="Label" SortExpression="label" /><asp:CheckBoxField DataField="email_default" HeaderText="Default" SortExpression="email_default" /><asp:CheckBoxField DataField="email_template" HeaderText="Email" SortExpression="email_template" /><asp:CheckBoxField DataField="event_template" HeaderText="Event" SortExpression="event_template" /> <asp:TemplateField HeaderText="Options"><ItemTemplate> <asp:LinkButton ID="btnModify" CommandName="Select" runat="server" ForeColor="Blue">Edit</asp:LinkButton> | <asp:LinkButton ID="btnDelete" CommandName="Delete" runat="server" ForeColor="Blue">Delete</asp:LinkButton></ItemTemplate></asp:TemplateField> </Columns><HeaderStyle BackColor="Khaki" /><AlternatingRowStyle BackColor="Beige" /></asp:GridView>Any ideas?Chris
View 1 Replies
View Related
Apr 28, 2006
why this wont work?error: Exception Details: System.Data.SqlClient.SqlException: Procedure or Function 'test1' expects parameter '@cid', which was not supplied..................................................................................ASPX CODE: string cid12; cid12 = "user5"; // Connection ConnectionStringSettings mysettings; mysettings = System.Configuration.ConfigurationManager.ConnectionStrings["dbase1_connection"]; string myConnectionString = mysettings.ConnectionString; SqlConnection conn1 = new SqlConnection(myConnectionString); SqlCommand cmd = new SqlCommand(); cmd.Connection = conn1; cmd.CommandText = "test1"; cmd.CommandType = CommandType.StoredProcedure; SqlParameter param = cmd.Parameters.Add("@cid", SqlDbType.NChar, 20); param.Direction = ParameterDirection.Input; param.Value = cid12; conn1.Open(); cmd.ExecuteNonQuery(); conn1.Close();.................................................................................STORED PROCEDURE:ALTER PROCEDURE dbo.test1 ( @cid nvarchar(20) )AS /* SET NOCOUNT ON */ select tech_id, customer_id, issue_main from [case] where customer_id = @cid --GO RETURN.................................................................................im using asp.net, C#, and sql expressforgive me. im new to this .netPLS HELP
View 1 Replies
View Related
Jul 19, 2004
possible to pass in a query as a parameter to a stored proc?
Number of constraints right now would make it a lot easier if I could pass in a query that selects all the ID's, tried but couldn't come up w/anything, just have a simple proc that does the deletes on 1 ID @ a time...since there are up to 100 that will need to be deleted, the qry as a param would be much more convenient. below is the proc...Thx for any help.
Code:
CREATE PROCEDURE [dbo].[s_DeletePeople]
@PeopleID int
/* single id to be deleted, tried just passing
* in a query that resembled a string and using it
* but it didn't work either.
*/
AS
Deletefrom tProjectManager
whereManager_ID in (@PeopleID)
Deletefrom tMerchandiser
whereID in (@PeopleID)
Deletefrom tProjectCall
wheremerchandiser_id in (@PeopleID)
Delete from tManager
whereID in (@PeopleID)
Deletefrom tDistrictManager
whereID in (@PeopleID)
Deletefrom tPeople
whereID in (@PeopleID)
....and on and on
GO
View 2 Replies
View Related
Jul 2, 2004
Hi there,
I have this problem..
I created a function in MS SQL and through this fuinction I am also passing the table name... now when I call the table name through the function in a SELECT statement, MS SQL is giving me an error that I have to declare the variabel....
Can someone help me??
Thanks!!
View 1 Replies
View Related
Jul 3, 2004
Hi there..
I created the following FUNCTION and I am trying to pass as a parameter a variable name withe the TABLE name.
MS SQL is not accepting it because it is asking me to declare it... can someone help me??
Thankyou
"CREATE FUNCTION getNSR2 (@tablename varchar(30)) RETURNS decimal(9,0)
AS
BEGIN
DECLARE @TB varchar(30)
SET @TB = @tablename
DECLARE @SR decimal(9,0)
SET @SR= (
SELECT MAX(SysRef)+1
FROM @tablename )
RETURN(@SR)
END
"
View 1 Replies
View Related
Feb 17, 2005
Hi...
I'm creating a procedure to fetch rows from table. One field will come come as IN(). Its the condition. That field is numeric field (note down), i would like to pass the In values as parameter.
eg: procedurename @fieldvalue varchar(100)
as
begin
...
WHERE fieldname IN(@fieldvalue)
while executing the procedure how to pass the value... or procedure itself has problem...?
Help me...
Tx in Advance...
View 2 Replies
View Related
Aug 1, 2014
I have a table with month names as columns, below is the structure
CREATE TABLE [MonthlyTarget]
(
[Jan] [int] NULL,
[Feb] [int] NULL,
[March] [int] NULL,
[April] [int] NULL,
[Code] ....
I will store some integer values in these columns,
I want to pass these column names as a parameter,and pull the data from the column.
How to do this..?
View 1 Replies
View Related
Jan 10, 2007
How do i pass parameter to trigger.iam using trigger to delete from multiple tables here is the code
Create trigger DeletePartyName on PartyMaster_Gen
(@PartyName varchar(50))
for delete
as
DELETE FROM PartyMaster_Address WHERE PartyName=@PartyName
DELETE FROM PartyMaster_DEPB WHERE Party_Name=@PartyName
DELETE FROM PartyMaster_Gen WHERE Party_Name=@PartyName
I want to pass @partyname parameter to this query. how do i do it.
View 4 Replies
View Related
Jan 25, 2007
Hi
I am getting error while passing parameter in SSIS package
I am writing following query in sql command
select * from Mytable where empid in (select empid from testtable where empid = ?)
Error:
Parameter cannot be extracted from the SQL Command. The Provider might not help to parse parameter information from the command. In that case, use the "SQL Command from variable" access mode, in which the entire SQL command is stored in a variable.
can any body help me out
Thanks
View 1 Replies
View Related
Mar 10, 2008
I have to pass 3parameters in function,
@begindate,@enddate and @group_type..
but in @group_type should be - state,zipcode and country from salestable
inview :vwstzipcont
create view vwstzipcont
as
select distinct s2.stype,s3.itemnmbr,s2.docdate,s3.state,s3.zipcode,s3.country from Salestable s3
left outer join (select distinct stype,docdate from salesdisttable) s2
on s2.stype = s3.stype
where s2.soptype = 2
go
create function mystzipcont
( @begindate datetime, @enddate datetime, @group_type char(70))
RETURNS TABLE
AS
RETURN
(Select distinct t.docdate,t.itemnmbr,t.index,t.group_type from
(
select distinct
vs.docdate,vs.itemnmbr,
p.index From Pubs P
inner join vwstzipcont vs
on vs.index = p.index
Where (vs.docdate between @begindate and @enddate)
and @group_type ) as t
order by t.itemnmbr,t.docdate
end
how can i assign @group_type variable or t.group_type? in s3.state,s3.zipcode,s3.country
can anyone tell me? what condition should be in where clause for this variable?
thanks
View 14 Replies
View Related
Jul 23, 2005
say I have a table with field1,field2,field3,....and have a SP with a parameter @myfieldis there a way I can doSelect @myfield from Table1thanks for your help
View 7 Replies
View Related
Oct 4, 2007
I am trying to pass a parameter to an sql statement that executes a stored proc. Here is my sql statement from the Execute SQL Task component.
USE [master]
GO
DECLARE @return_value int
EXEC @return_value = [dbo].[sp_sendSMTPmail]
@To = N'john.r.carter@bankofamerica.com',
@Subject = ?,
@Body = NULL,
@Importance = NULL,
@Cc = NULL,
@Bcc = NULL,
@Attachments = NULL,
@HTMLFormat = NULL,
@From = N'bpm@bankofamerica.com'
SELECT 'Return Value' = @return_value
GO
I have the ByPassPrepare set to True.
Can anyone tell me why I can't get this to work.
Thanks,
JC
View 1 Replies
View Related
Dec 19, 2007
Hi,
I try to pass a parameter to a IN statement in SSRS but couldn't get it work. It likes following sample:
select * from T1 where name IN (@nameList)
I passed @nameList like 'aa', 'bb', ''aa'', ''bb''(two single quotations), all didn't work. I couldn't even get it work on "Reporting -> Data" screen.
What is the right way to pass a parameter to IN statement in SSRS? I am using C# and SSRS2005.
Thanks!
View 1 Replies
View Related
