I'm using MSDE and I'd like to set a default value of a space (or spaces), and in design-view, it lets me enter a space. But it is interpreted as an empty-string "" which gets converted to Nulls when it is moved to another string field? I'm not sure why. Is there any way around this?
View 3 RepliesHi all,
I need to load a table with 820,000 records from a Sybase db via DTS. It always fail with the error:
"Error at destination for row number 820000. Could not allocate space for object in tablespace tempdb
. The default filegroup is full.".
There is only the primary filegroup defined in the db. I've increased the size from 1.5GB to 2GB,
and specify that it shd grow automatically by 10% and there's no limit to the size.
There is still some 28GB in the server, so it should be fine.
It still fail so I added another file to the primary filegroup with size 100MB. Again, it failed with the same error msg.
Where or how else can I increase the tempdb size?
Any help is appreciated.
Thanx,
Jes
Hi,
I am trying to do this:
UPDATE Users SET uniqueurl = replaceAllEmptySpacesInUniqueURL('uniqueurl')
What would be the syntax.
Any help appreciated.
Thanks
I am generating a Report from Sql Data Source in Sql Server 2005 and viewing the Report in Report viewer control of Visual Studio 2005.
The data in the Data Source contains string with multiple spaces (for example €œ Test String €œ) but when they get rendered in Report viewer control, multiple spaces gets converted to single space €? Test String €œ.
I tried following solutions
1) Replacing spaces with €œ €?
2) Inserting <pre> tag before the string and </pre> tag after the string (Also tried <Pre> instead of <pre>)
But in all the cases result is same. The Report Viewer control is showing €œ €? instead of space and €œ<Pre>€? tag instead of preserving spaces.
Please provide me a solution so that spaces can be preserved in Report Viewer.
I am using the below script to get space alerts  and now i am interested in sending alerts  if for any drive space available is Less than 10% or 15%.. how to convert beelow code to find in %Â
Declare @Drives Varchar(20)
DECLARE @Spaces Varchar(50)
DECLARE @availableSpace FLOAT
DECLARE @alertMessage Varchar(4000)
DECLARE @RecipientsList  VARCHAR(4000);
CREATE TABLE #tbldiskSpace
[Code] ....
Hi.. I was doing a good maintenance on my DB and my trans log LDF keep growing until 30GB but my DB data file MDF is only 2GB. I found the two following method to reduce my log size.
Method 1: I used veritas to backup log file with truncate
Method 2: I used the shrink database option in Enterprises manager to shrink it (file chosen=log , use default option)
After doing that, I found my LDF log file is still about the same size=27GB but when I see clearly, from the shrink database windows, the log spaced used reduced to only 100MB, the allocation log space is still 27GB. Why? How to make the LDF smaller to be the around the same size as the space used 100MB?
This is driving me bananas. Can't find any info on this anywhere....SQL 2000 seems to replace double space with a single space when I seta varchar field to " " (2spaces), it only stores " " (1space). Whyon earth would microsoft do this? If I save 2 spaces - I WANT TO SEE2 SPACES!!!!Can anyone help? Is this a database setting? Is this due to usingvarchar?Any help appreciated.Colin Hale
View 2 Replies View RelatedHello,
Somebody know how to reduce the space allocated for the transaction log space for my SQL_DB ?
3700 MB allocated but only 100 MB used and 3600 MB are free !
Transaction log properties :
Automatically grow file are filled
file growth by percent = 5%
maximum file size - restrict filegrowth = 3700 MB (we can't reduce it !)
Thank you for your precious help !
Khaix from Brussel.
How do we suppress multiple spaces to a single space in T-SQL
E.G.
Field: FullName
e.g.
WOMENS HEALTH RIVER VALLEY
JOHN FAMILY MED GROUP
HERSH STWEART P.
PARK HEIGHTS MEDICAL CENTER
KOPP WHITEFIELD E
The o/p wanted is
HERSH STWEART P.
Thank you.
@pvColumnName  VARCHAR(100) = Default,  
However, I am unable to determine what is the value for Default. Is it '' ?
Default is not permitted as a constant - below fails to parse:
WHERE t2.TABLE_TYPE = 'BASE TABLE'
AND (@pvColumnName = Default OR t1.[COLUMN_NAME] Like @vColumnName)
I made some copy of table and I have this error but on my hard disk i have 4 gig of empty space.
Microsoft OLE DB Provider for ODBC Drivers error '80040e14'
[Microsoft][ODBC SQL Server Driver][SQL Server]Could not allocate space for object 'Backup_Date_11_24_00_Time_9_08_34_AM' in database 'LogActiviteIntramedia' because the 'PRIMARY' filegroup is full.
/Intranet_API/Forms/videTableLog.asp, line 16
My question is how can I increase the space of primary filegroup?
Thanks and have a good friday
Hi,
Does anyone have a workaround or know of a fix to this problem:
Default value set to 'date pick' from date currently within field by setting value equal to that field . ie if date is 01/01/2010 date picker opens in Jan 2010 - works ok.
However, once published to Sharepoint and run through browser the Date Picker ignores the default value and the date picker opens for today. ie April 2008.
Any words of wisdom gratefully recieved,
Howard Stiles
I need to create a proc. which would send a warning via xp_sendmail when the database space gets within 10% of allocated space. I have written one which uses sp_spaceused however this proc requires DBCC udateusage to be run in order to get accurate results. This would work but i don't know how quickly the data returned by sp_spaceused becomes corrupt therefore how often DBCC should be run. I ran DBCC on our main production server and it took a considerable amount of time. Basically I am looking for another way to do this without using sp_spaceused. Any ideas
View 2 Replies View RelatedDoes anyone have any knowledge on how to find out the log space left in a database? I've tried to use the DBCC sqlperf (logspace) and it gave me the numbers but I only need one of the numbers. How can I retrieve it? Someone please let me know if you have any info. Thanks a million.
View 7 Replies View RelatedThe command sp_spaceused @updateusage = true
returns following result. How do I have to calculate the single values that it gives me an equation:
database size = data size plus reserved space minus etc.
Somehow it is not clear to me how it is split up.
Thank you
mipo
database_namedatabase_sizeunallocated space
------------------- -----------------------------------
opms 3498.88 MB807.41 MB
reserved data index_size unused
------------------ ------------------------------------ ------------------
2479576 KB 1050720 KB 1344792 KB 84064 KB
I have a 12 GB database growing at 25 MB daily. The server will soon run out of space, 3 GB left. I cannot buy a new server or new RAID subsystems at once, and want to prevent the server being filled up fast.
What are the best ways? Can you share with me some of your thougts or comment on the following:
1) Archive old data in many tables across servers -
Can SQL Server do it directly across server or we need to select into temp database and back it up to tape or using bcp out and in?
2) Put the >9Gb disk dump to another server. The daily disk dump takes up a lot of space.
3) Dump to the tape directly, saving 9 GB disk space of dump device.
4) ? ?
Hi All,
Which table in the master database has the information about free space available for a particular database? I am trying to find the information that is displayed under the general tab in EM when you look at the database properties.
thanks.
Hi!
I need to write a sql to find out the space used for the sql server database .
Please help.
Can i use sp_spaceused?
suresh
I have a fields with the space char in data.
How to find a space character in query?
'Smith David'
displaying the property of a database? What does it mean?
I am sure when this happens but now when I right click on a database and
select property, the space available= 0.00MB.
I still have physical space on the server.
When viewing the taskpad.
Space allocated:
data 5500MB used, 1700 MB free
log 15MB used, 300 MB free
Please help. Thank you
Need to know how to shrink a 6.5 DB. When going inot Shrink dialog it won't let me change it to any amount less thatn what it is already set to.
DBCC won't let me do it bc I have to be in single mode.
Any other options? I know in 7/2K you can:
Backup Database dbname with truncate_only and then restore the bak file.
I have a database with almost 3 tables each contains atleast 1 million Rows, and My hard disk space is 14G.
I want to insert another table some queries i have selected from different tables.
I got this Error:
(254118 row(s) affected)
(935885 row(s) affected)
Server: Msg 1105, Level 17, State 2, Procedure sp_ProcessRowData, Line 68
Could not allocate space for object 'Processed_Data' in database 'Mydb' because the 'PRIMARY' filegroup is full.
Any Help............
Regards Mr. Mumin
Thanks All,
Hope this question is not too dumb for this forum.. but here goes.
I have a DB on SQL Server 2K which is the backend for our Great Plains System.
When I look at the properties of the Database from Enterprise Manager, It shows Size: 1370.57mb and space available: 0.00 The ZERO space available is what I'm concerned about. The DB is in FULL recovery mode with a nighly Full backup and transaction log backups throught the day. The DB is set to autogrow and the file growth is set at 20 percent.
My question is.. should I be worried about the ZERO space available and if so, how do I correct this??
Hi, Needs helps.
I have a name filed in my table in sql. My name field combines first name middle name(initial) and last name. I need to combine the name into one string. Example if the name is John K Smith - I need to be JohnKSmith. I try to use replace function which I thought could be best, but is not working- may be I'm missing something. Please, I need your help!
Hiza
is there a way of taking up to the first space in a string
View 2 Replies View RelatedOkay, so i've been working in foxpro for a while, but now we're moving on to bigger stronger faster. my question is, in foxpro, i used to be able to fix some name formatting issues with two commands:
replace all fname with subs(name,1,at(' ',name))
replace all lname with subs(name,(at(' ',name)+1),(30-at(' ',name)))
this basically locates the space in the name on each record, and replaces the first name with 0-space and the last with space-end of field
little cude, but it gets the job done. so basically i'm looking for the same solution but for t-sql, i tried something like:
update t1
set name=substring(name,1,at(' ',name))
from temp t1
with no luck, AT() is not an expression in sql, so what is out there that's like it?
Dear All
My query is reagaing the SQL server space
Imagine a situation where i have purchased server space of 50 kb for my sql server
and at the time of hosting of my web site the size of the data base was 40 kb, once it is hosted
and as the data of users and visitors get stored into the database,it gets expands and the size if the size of the database exceeds the
the occupied space,will my database get stuck or..any other option to overcome this senario or Do i have to get more space periodically.
Help me out
Thank you
Hi, how does one normally insert a space in a statement like this: INSERT INTO table (column0, column1, column2)
VALUES (getdate(), 'blah', CONVERT(VARCHAR(19), GETDATE(), 120) + 'blahblah')In column2 the output looks like ' 2007-10-08 20:19:08blahblah', but I want it to be like '2007-10-08 20:19:08 blahblah' (two spaces between date and text).Thanks,Chris
I made a table which is consist of three text data type and a datetime
data type. I want to change from text data type into varchar datatype.
My question is which datatype varchar or text is taking more space
memories from your harddisk ?? Or do u have any suggestion ?
Thank you very much
I have a sql server 2005 DB.When I define a column as a nvarchar(50) and fill it with one character (for approx 10000 rows), how much space is taken physically on the HD?Also, if I then redefine the column (as it only contains 1 char) to nvarchar(1), is the physical size on the HD reduced immediately or do I have to perform some special action?
View 2 Replies View RelatedHi, I work on SQL Server 6.5,
and I want to make a documentation about available space of my databases.
So, I must know how many databases space used everyday ?
If somebody know how to get this available space or how to make this script.
I hope you want to tell me about this.
Thanks you so much for your cooperation.
What will the net result be if I limit the tempdb size, and it grows to it's limit? Will it crash my server? Will it shutdown SQL? I will most likely be moving it to another drive, but until then I can't have it consuming my entire drive like it did 2 days ago! Please Advise. - Rob
View 5 Replies View RelatedIf I right-click on a database and choose Edit, on the Database Tab Enterprise Manager displays the Data Space Available to be 0.00, even though I know there is atleast 10GB spare !. Any ideas ? Thanks.
View 1 Replies View Related