Here is want I did.
SELECT dong2 + ' ' + dong3 + ' ' + dong4 + bunji AS 'Address'
FROM zipcode.dbo.zipcode2
I want to combine all of the columns to 1 column, but some columns are empty and some are NULL. The ones that are NULL return as NULL instead of an address.
How do I put this together into 1 string?
Hello All,
I'm a non-programmer and an SQL newbie. I'm trying to create a printer usage report using LogParser and SQL database. I managed to export data from the print server's event log into a table in an SQL2005 database.
There are 3 main columns in the table (PrintJob) - Server (the print server name), TimeWritten (timestamp of each print job), String (eventlog message containing all the info I need). My problem is I need to split the String column which is a varchar(255) delimited by | (pipe). Example:
2|Microsoft Word - ราย�ารรับ.doc|Sukanlaya|HMb1_SD_LJ2420|IP_192.10.1.53|82720|1
The first value is the job number, which I don't need. The second value is the printed document name. The third value is the owner of the printed document. The fourth value is the printer name. The fifth value is the printer port, which I don't need. The sixth value is the size in bytes of the printed document, which I don't need. The seventh value is the number of page(s) printed.
How I can copy data in this table (PrintJob) into another table (PrinterUsage) and split the String column into 4 columns (Document, Owner, Printer, Pages) along with the Server and TimeWritten columns in the destination table?
In Excel, I would use combination of FIND(text_to_be_found, within_text, start_num) and MID(text, start_num, num_char). But CHARINDEX() in T-SQL only starts from the beginning of the string, right? I've been looking at some of the user-defind-function's and I can't find anything like Excel's FIND().
Or if anyone can think of a better "native" way to do this in T-SQL, I've be very grateful for the help or suggestion.
Thanks a bunch in advance,
Chutikorn
I'm creating a web-based NT RAS report site and am looking for the most efficient way to import the data from NT Event log into SQL2k. I'm using the 'dumpel' utility from rsc kit and all is fine except the 10th column - the message detail:
"The user DOMAINuserid connected on port Mdm15 on 08/23/2002 at 07:25am and disconnected on 08/23/2002 at 07:27am. The user was active for 2 minutes 23 seconds. 78809 bytes were sent and 50675 bytes were received. The port speed was 49300."
I need to parse this one long text string into 6 distinct columns: userID, port, duration, bytes_xmt, bytes_rcv and portspeed. After a quick review of the rowsets, the strings seem to hold a consistent output ... no real variances I can see.
I've dablled with views but am facing a small performance issue that could get bigger: The sql server not only has to run the text file import package, but also the view to format the text dump into a workable dataset, then my report code bangs over 30 queries against the final dataset. It already takes our SQL2k server over 3 minutes to parse about 20,000 rows and the server's a beast (dual 1.8 p4 cpu, 3gb ram, raid, etc).
What I think would work best is to abandon the view (performance will only get worse as the row count increases) and instead INSERT the rows into one table.
Any ideas anyone? any good scripts out there that can help me to parse the long text string quicker that using substring and replace functions?
TIA:rolleyes: :rolleyes:
When quering a table with given criteria, For ex:
select notes, jobid, caller from contact where status in (6) and jobid = 173
I am getting this:
This job will be posted to Monster for 2 weeks. 173 906
Waiting for full budget approval 173 906
TUrns out we're uppin 173 906
What should I do so that these three columns for the same jobid from the same caller appears in only one column, either separated by a comma or semicolon?
Please HELP!!!!!
I have a table with a string value, where all values are seperated by a space/blank. I now want to use SQL to split all the values and insert them into a different table, which then later will result in deleting the old table, as soon as I got all values out from it.
Old Table:
Code:
ID, StringValue
New Table:
Code:
ID, Value1, Value2
Do note: Value1 is INT, Value2 is of nvarchar, hence Value2 can contain spaces... I just need to split on the FIRST space, then convert index[0] to int, and store index[1] as it is.
I can split on all spaces and just Select them all and add them like so: SELECT t.val1 + ' ' + t.val2... If I cant find the first space that is... I mean, first 2-10 characters in the string can be integer, but does not have to be.Shall probably do it in code instead of SQL?Now I want to run a query that selects the StringValue from OldTable, splits the string by ' ' (a blank) and then inserts them into New Table.
Code:
SELECT CASE CHARINDEX(' ', OldTable.stringvalue, 1)
WHEN 0 THEN OldTable.stringvalue
ELSE SUBSTRING(OldTable.stringvalue, 1, CHARINDEX(' ', OldTable.stringvalue, 1) - 1)
END
AS FirstWord
FROM OldTable
Found an example using strange things like CHARINDEX..But issue still remains, because the first word is of integer, or it does not have to be...If it isn't, there is not "first value", and the whole string shall be passed into "value2".How to detect if the very first character is of integer type?
Code:
@declare firstDigit int
IF ISNUMERIC(SUBSTRING(@postal,2,1) AS int) = 1
set @firstDigit = CAST(SUBSTRING(@postal,2,1) AS int)
ELSE
set @firstDigit = -1
[code]....
I have a business need to create a report by query data from a MS SQL 2008 database and display the result to the users on a web page. The report initially has 6 columns of data and 2 out of 6 have JSON data so the users request to have those 2 JSON columns parse into 15 additional columns (first JSON column has 8 key/value pairs and the second JSON column has 7 key/value pairs). Here what I have done so far:
I found a table value function (fnSplitJson2) from this link [URL]. Using this function I can parse a column of JSON data into a table. So when I use the function above against the first column (with JSON data) in my query (with CROSS APPLY) I got the right data back the but I got 8 additional rows of each of the row in my table. The reason for this side effect is because the function returned a table of 8 row (8 key/value pairs) for each json string data that it parsed.
1. First question: How do I modify my current query (see below) so that for each row in my table i got back one row with 19 columns.
SELECT A.ITEM1,A.ITEM2,A.ITEM3,A.ITEM4, B.*
FROM PRODUCT A
CROSS APPLY fnSplitJson2(A.ITEM5,NULL) B
If updated my query (see below)Â and call the function twice within the CROSS APPLY clause I got this error: "The multi-part identifier "A.ITEM6" could be be bound.
2. My second question: How to i get around this error?
SELECT A.ITEM1,A.ITEM2,A.ITEM3,A.ITEM4, B.*, C.*
FROM PRODUCT A
CROSS APPLY fnSplitJson2(A.ITEM5,NULL) B, Â fnSplitJson2(A.ITEM6,NULL) C
I am using Microsoft SQL Server 2008 R2 version. Windows 7 desktop.
I'd like to first figure out the count of how many rows are not the Current Edition have the following:
Second I'd like to be able to select the primary key of all the rows involved
Third I'd like to select all the primary keys of just the rows not in the current edition
Not really sure how to describe this without making a dataset
CREATE TABLE [Project].[TestTable1](
[TestTable1_pk] [int] IDENTITY(1,1) NOT NULL,
[Source_ID] [int] NOT NULL,
[Edition_fk] [int] NOT NULL,
[Key1_fk] [int] NOT NULL,
[Key2_fk] [int] NOT NULL,
[Code] .....
Group by fails me because I only want the groups where the Edition_fk don't match...
Here is my requirement, How to handle using SSIS.
My flatfile will have multiple columns like :
IDÂ key1Â key2Â key3Â key 4
I have SP which accept 3 parameters ID, Key, Date
NOTE: Key is the coulm name from the Excel. So my sp call look like
sp_insert ID, Key1, date
sp_insert ID, Key2,date
sp_insert ID, Key3,date
I am facing a problem in writing the stored procedure for multiple search criteria.
I am trying to write the query in the Procedure as follows
Select * from Car
where Price=@Price1 or Price=@price2 or Price=@price=3
and
where Manufacture=@Manufacture1 or Manufacture=@Manufacture2 or Manufacture=@Manufacture3
and
where Model=@Model1 or Model=@Model2 or Model=@Model3
and
where City=@City1 or City=@City2 or City=@City3
I am Not sure of the query but am trying to get the list of cars that are to be filtered based on the user input.
Please can anyone help me for the following?
I want to merge multiple rows (eg. 3rows) into a single row with multip columns.
for eg:
data
Date Shift Reading
01-MAR-08 1 879.880
01-MAR-08 2 854.858
01-MAR-08 3 833.836
02-MAR-08 1 809.810
02-MAR-08 2 785.784
02-MAR-08 3 761.760
i want output for the above as:
Date Shift1 Shift2 Shift3
01-MAR-08 879.880 854.858 833.836
02-MAR-08 809.810 785.784 761.760
Please help me.
I have a table with single row like below
 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Column0 | Column1 | Column2 | Column3 | Column4|
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Value0Â Â Â | Value1Â Â Â | Value2Â Â Â Â | Value3Â Â Â |Â Value4Â |
Am looking for a query to convert above table data to multiple rows having column name and its value in each row as shown below
_ _ _ _ _ _ _ _
Column0 | Value0
 _ _ _ _ _ _ _ _
Column1 | Value1
 _ _ _ _ _ _ _ _
Column2 | Value2
 _ _ _ _ _ _ _ _
Column3 | Value3
 _ _ _ _ _ _ _ _
Column4 | Value4
 _ _ _ _ _ _ _ _
I concatenate multiple rows from one table in multiple columns like this:
--Create Table
CREATE TABLE [Person].[Person_1](
[BusinessEntityID] [int] NOT NULL,
[PersonType] [nchar](2) NOT NULL,
[FirstName] [varchar](100) NOT NULL,
CONSTRAINT [PK_Person_BusinessEntityID_1] PRIMARY KEY CLUSTERED
[Code] ....
This works very well, but I want to concatenate more rows with different [PersonType]-Values in different columns and I don't like the overhead, of using the same table in every subquery ([Person_1]). Is there a more elegant way to do this, without using a temp table or something else?
Hello All,
I am rather new to reporting on SQL Server 2005 so please be patient with me.
I need to create a report that will generate system information for a server, the issue im having is that the table I am having to gather the information from seems to only allow me to pull off data from only one row.
For example,. Each row contains a different system part (I.e. RAM) this would be represented by an identifier (1), but I to list each system part as a column in a report
The table (System Info) looks like:-
ID | System part |
1 | RAM
2 | Disk Drive
10| CPU
11| CD ROM |
Which
So basically I need it to look like this.
Name | IP | RAM | Disk Drive|
----------------------------------------------
A | 127.0.0.1 | 512MB | Floppy
So Far my SQL code looks like this for 1 item
SELECT SYSTEM PART
FROM System Info
WHERE System.ID = 1
How would I go about displaying the other system parts as columns with info
Any help is much appreciated!
Hi,
I have multiple columns in a Single Table and i want to search values in different columns. My table structure is
col1 (identity PK)
col2 (varchar(max))
col3 (varchar(max))
I have created a single FULLTEXT on col2 & col3.
suppose i want to search col2='engine' and col3='toyota' i write query as
SELECT
TBL.col2,TBL.col3
FROM
TBL
INNER JOIN
CONTAINSTABLE(TBL,col2,'engine') TBL1
ON
TBL.col1=TBL1.[key]
INNER JOIN
CONTAINSTABLE(TBL,col3,'toyota') TBL2
ON
TBL.col1=TBL2.[key]
Every thing works well if database is small. But now i have 20 million records in my database. Taking an exmaple there are 5million record with col2='engine' and only 1 record with col3='toyota', it take substantial time to find 1 record.
I was thinking this i can address this issue if i merge both columns in a Single column, but i cannot figure out what format i save it in single column that i can use query to extract correct information.
for e.g.;
i was thinking to concatinate both fields like
col4= ABengineBA + ABBToyotaBBA
and in search i use
SELECT
TBL.col4
FROM
TBL
INNER JOIN
CONTAINSTABLE(TBL,col4,' "ABengineBA" AND "ABBToyotaBBA"') TBL1
ON
TBL.col1=TBL1.[key]
Result = 1 row
But it don't work in following scenario
col4= ABengineBA + ABBCorola ToyotaBBA
SELECT
TBL.col4
FROM
TBL
INNER JOIN
CONTAINSTABLE(TBL,col4,' "ABengineBA" AND "ABB*ToyotaBBA"') TBL1
ON
TBL.col1=TBL1.[key]
Result=0 Row
Any idea how i can write second query to get result?
MS SQL 2008 R2
I have the following effectively random numbers in a table:
n1,n2,n3,n4,SCORE
1,2,5,9,i
5,20,22,25,i
6,10,12,20,i
I'd like to generate the calculated column SCORE based on various scenarios in the other columns. eg.
if n1<10 and n2<10 then i=i + 1
if n4-n3=1 then i=i + 1
if more than 2 consecutive numbers then i=i + 1
So, I need to build the score. I've tried the procedure below and it works as a pass or fail but is too limiting. I'd like something that increments the variable @test1.
declare @test1 int
set @test1=0
select top 10 n1,n2,n3,n4,n5,n6,
case when (
n1=2 and
n2>5
)
then @test1+1
else @test1
end as t2
from
allNumbers
I want to search in fulltextindexes for multiple searchterms in multiple columns. The difficulty is:
I don't want only the records with columns that contains both searchterms.
I also want the records of which one column contains one of the searchterm ans another column contains one of the searchterms.
For example I search for NETWORK and PERFORMANCE in two columns.
Jobdescr_________________________|Jobtext
Bad NETWORK PERFORMANCE________|Slow NETWORK browsing in Windows XP
Bad application PERFORMANCE_______|Because of slow NETWORK browsing, the application runs slow.
I only get the first record because JobDescr contains both searchterms
I don't get the second record because none of the columns contains both searchterms
I managed to find a workaround:
SELECT T3.jobid, T3.jobdescr
FROM (SELECT jobid FROM dba.job WHERE contains(jobdescr, 'network*') or CONTAINS(jobtext, 'network*') ) T1
INNER JOIN (SELECT jobid FROM dba.job WHERE contains(jobdescr, 'performance*') or CONTAINS(jobtext, 'performance*')) T2 ON T2.Jobid = T1.Jobid
INNER JOIN (SELECT jobid, jobdescr FROM dba.job) T3 ON T3.Jobid = T1.Jobid OR T3.Jobid = T2.JobId
It works but i guess this will result in a heavy database load when the number of searchterms and columns will increase.
Does anyone know a better solution?
Thanks in advance Bart Rouw
I have the following results:
ID, Office1
1, Testing
1, Hello World
What i am trying to do is to get this result:
ID, Office1, Office2
1, Testing, Hello World
how i can accomplish this task.
I have an Parent table (Parentid, LastName, FirstName) and Kids table (Parentid, KidName, Age, Grade, Gender, KidTypeID) , each parent will have multiple kids, I need the result as below:
I need results for each parent like this
ParentID, LastName, FirstName, [Kid1Name,Kid2Name,Kid3Name], [Kid1Age,Kid2Age,Kid3Age],[kid1grade,Kid2grade,Kid3grade],[kid1gender,Kid2gender,Kid3gender]
I previously posted a problem with result set bindings but I have not been able to resolve my problem. I guess all this comes with being new to programming in this environment! Anyway, I am trying to figure out how to process from an ADO.NET connection multiple rows with multiple columns. I have to read and manipulate each row. I was originally looking at using a foreach loop but have not been able to get it to work. One reply to my previous thought I should be using a data task to accomplish this. Could someone tell me the best way to handle this situation? As a note, I am new to programming in SSIS and basically trying to learn it as I go so please bear with me! Thanks in advance!
View 1 Replies View RelatedIs there a way to delete from multiple tables/views a column with a specificname? For example, a database has 50 tables and 25 views all have a columnnamed ColumnA. Is it possible to write a simple script that will deleteevery column named ColumnA from the database?Seems to be it would be possible and I can somewhat vision it usingsysobjects but without wanting to spend too much time generating the script(when I could in shorter time manually delete) thought I'd pose the question.Thanks.
View 2 Replies View RelatedSo I have been trying to get mySQL query to work for a large database that I have. I have (lets say) two tables Table_One and Table_Two. Table_One has three columns: Type, Animal and TestID and Table_Two has 2 columns Test_Name and Test_ID. Example with values is below:
**TABLE_ONE**
Type Animal TestID
-----------------------------------------
Mammal Goat 1
Fish Cod 1
Bird Chicken 1
Reptile Snake 1
Bird Crow 2
Mammal Cow 2
Bird Ostrich 3
**Table_Two**
Test_name TestID
-------------------------
Test_1 1
Test_1 1
Test_1 1
Test_1 1
Test_2 2
Test_2 2
Test_3 3
In Table_One all types come under one column and the values of all Types (Mammal, Fish, Bird, Reptile) come under another column (Animals). Table_One and Two can be linked by Test_ID
I am trying to create a table such as shown below:
Test_Name Bird Reptile Mammal Fish
-----------------------------------------------------------------
Test_1 Chicken Snake Goat Cod
Test_2 Crow Cow
Test_3 Ostrich
This should be my final table. The approach I am currently using is to make multiple instances of Table_One and using joins to form this final table. So the column Bird, Reptile, Mammal and Fish all come from a different copy of Table_one.
For e.g
Select
Test_Name AS 'Test_Name',
Table_Bird.Animal AS 'Birds',
Table_Mammal.Animal AS 'Mammal',
Table_Reptile.Animal AS 'Reptile,
Table_Fish.Animal AS 'Fish'
From Table_One
[Code] .....
The problem with this query is it only works when all entries for Birds, Mammals, Reptiles and Fish have some value. If one field is empty as for Test_Two or Test_Three, it doesn't return that record. I used Or instead of And in the WHERE clause but that didn't work as well.
Hi,
I want to convert multiple rows to one row and multiple columns. I saw some examples with PIVOT but i could not get them to work.
Heres what i want to do:
This is the how the table is:
EmpID Designation
678
CFA
679
CFA
680
CFA
685
CFP
685
CIMA
685
IMCA
I want it to display as:
EmpID Designation1 Designation2 Designation3
678 CFA
679 CFA
680 CFA
685 CFP CIMA IMCA
could anyone provide some help on this?
Thanks
I have 4 tables involved here. The priority table is TABLE1:
NAMEID TRANDATE TRANAMT RMPROPID TOTBAL
000001235 04/14/2014 335 A0A00 605
000001234 04/14/2014 243 A0A01 243
000001236 04/14/2014 425 A0A02 500
TRANAMT being the amount paid & TOTBAL being the balance due per the NAMEID & RMPROPID specified.The other table includes a breakdown of the total balance, in a manner of speaking, by charge code (thru a SUM(OPENAMT) query of DISTINCT CHGCODE
TABLE2
NAMEID TRANDATE TRANAMT RMPROPID CHGCODE OPENAMT
000001234 04/01/2014 400 A0A01 ARC 0
000001234 04/05/2014 -142 A0A01 ARC 228
000001234 04/10/2014 15 A0A01 ALT 15
[code]...
Also with a remaining balance (per CHGCODE) column. Any alternative solution that would effectively split the TABLE1.TRANAMT up into the respective TABLE2.CHGCODE balances? Either way, I can't figure out how to word the queries.
I'm trying to split a hyphen-delimited string into three columns in a view. I've been using substring and len to split up the string, but it is getting very complicated (and isn't working in all cases). I've used a SPLIT function in vbscript - does t-sql have anything similar? I've attached a spreadsheet that shows what I am looking for. Maybe someone can guide me in the right direction?
Thanks.
I have a table called products with the values like
ProductId ProductName
10 A
20 D,E,F,G
30 B,C
40 H,I,J
I need to display each productid's with
ProductId ProductName
10 A
20 D
20 E
20 F
20 G
30 B
30 C
40 H
40 I
40 J
I will be appreciated if you can send me the code.
Thanks,
Mears
Hi,
In short:
I want my following problem to work with a LIKE instead of exact match and if possible be faster. (currently 4s)
Problem:
I got a set of rows with varchar(50), spread out over multiple tables.
All those tables relate to a central Colour table.
For each of the columns, I want to match the values with a set of strings I insert and then return a set of Colour.Id
E.g: input: 'BLACK', 'MERCEDES', '1984'
Would return colour ids "025864", 45987632", "65489" and "63249"
Because they have a colour name containing 'BLACK' or are on a car from 'MERCEDES' or are used in '1984'.
Current Situation:
I) Create a table containing all possible values
CREATE TABLE dbo.CommonSearch(
id int IDENTITY (1, 1) NOT NULL,
clr_id int,
keyWord varchar(40),
fieldType varchar(25)
And fill it with all the values (671694 rows)
)
II) Stored Procedure to cut a string up into a table:
CREATE FUNCTION dbo.SplitString
(
@param varchar(50),
@splitChar char = ''
)
RETURNS
@T TABLE (keyWord varchar(50))
AS
BEGIN
WHILE LEN( @param ) > 0 BEGIN
declare @val varchar(50)
IF CHARINDEX( @splitChar, @param ) > 0
SELECT @val = LEFT( @param, CHARINDEX( @splitChar, @param ) - 1 ) ,
@param = RIGHT( @param, LEN( @param ) - CHARINDEX( @splitChar, @param ) )
ELSE
SELECT @val = @param, @param = SPACE(0)
INSERT INTO @T values (@val)
END
RETURN
END
III)Stored Procedure to query the first table with the second one
CREATE PROCEDURE [dbo].[GetCommonSearchResultForTabDelimitedStrings]
@keyWords varchar(255) = ''
AS
BEGIN
SET NOCOUNT ON;
select clr_id, keyWord, fieldType
from dbo.commonSearch
where keyWord in (select * from splitString(@keyWords, ''))
END
So, how can I use a LIKE statement in the IN statement of the last query.
Furthermore, I was wondering if this is the best sollution to go for.
Are there any better methods? Got any tuning tips to squeeze out an extra second?
I have a table name tbl_testme with columns (id,mac,keys,outputmk)
mac column have 12 character and keys have 16 character
mac keys
6545da7n9hg8 hsi457s5sd77jk87
What i want is i need to split the column into 4 characters of both column E.G.
(6545 da7n 9hg8) and (hsi4 57s5 sd77 jk87)
after splitting i need to take last 4 character of key(jk87) and last 4 character of mac(9hg8)and join them and insert that into ouputmk column.
E.G.
(jk87-9hg8-sd77-da7n-57s5-6545-hsi4)
I need this to insert in outputmk column ....
How to separate a long string and put them into three columns.
For example string
Toronto|Ontario|Canada,Dallas|Texas|USA,New York|New York|USA,Windsor|Ontario|Canada
I have a table with 5 columns, 3 columns are City, State and Country.
I would like to separate them and put those into categories
Continent City State Country Added
Toronto Ontario Canada
Dallas Texas USA
New York New York USA
I have a column with varchar(2000) that contains events with time-stamps. The data looks something like this for a record:
03:14:46: abc 03:14:47: def 03:14:59: xyz 03:15:17: zzz
I would like to parse out each time-stamp and event to a separate columns, like
col1= 03:14:46: abc
col2= 03:14:47: def
col3= 03:14:59: xyz
col4= 03:15:17: zzz
The number of events are dynamic so number of time-stamps with events can be anything from 2-30 of them.
Anyone would suggest how I can resolve this?
Thanks.
Hi guys,
Is there a way to declare a default value of empty string '' for a varchar table column?
Thanks,Kevin
I have a column containing values for different languages. I want to cut out the values per languate in a seperat column.
The syntax is a 2 letter country code followed by : the value is contained in double quotes. each languate is separated by a ; (except for the last one)
EX ur English, Dutch and Swedish:US:"Project/Prescription sale";NL:"Project/specificatie";SW:"Objektsförsäljning"
The result would Be
column header US
with value Project/Prescription sale
next column header NL
with value Project/specificatie etc.
Here are table examples:
IF OBJECT_ID('[#SALETYPE]','U') IS NOT NULL
DROP TABLE [#SALETYPE]
CREATE TABLE [#SALETYPE](
[SaleType_Id] [int] NOT NULL,
[name] [nvarchar](239) NOT NULL,
[Code] ....
Hi,Is it possible to interchange column & row data from the t-sql onstoring into a file?Thanks*** Sent via Developersdex http://www.developersdex.com ***
View 3 Replies View RelatedCan I write a having statement for multiple columns? Here's my situation: I want to select duplicates from a table based off of 3 fields:Normally one would use HAVING COUNT(*) > 1however, I need to INSERT INTO my table based on duplicates of the 3 fields but also insert the key from the first table, ie:insert into #TempTable (key, field1, field2, field3)select key, field1, field2, field3 from Table1 order by field1, field2, field3 Having COUNT(field1)>1 and COUNT(field2)>1 and COUNT(field3)>1 My question is this: Will this having statement compare all three fields of this row to all three fields of the other rows, or does it do each column independantly?for example:row 1: a b g row 2: a c k row 3: j c k These rows aren't the same, even though there are 2 a's, I want it to look at the entire row, and not return all three of these.
View 1 Replies View Related