I Want To Jump To An Entry Specified By Parameter, Doable As Bookmark?
Aug 30, 2006
I know I can do to just show 1 entry
select * from table where no = @parameter_no
but is it possible to actually select ALL entries (I have 250 for now) in the list report, but jump to a particular # based on parameter?
Say I have ID 1 ~ 250 (select * from table) in DataSet, but when I enter 220 in parameter, the report still selects all 250 entries but jump to the 220 entry?
I have bookmark set up on each entry
Thanks for any help. I noticed in my search that jump to a report + bookmark isn't supported, does my situation fall under that?
View 1 Replies
ADVERTISEMENT
Aug 17, 2007
Hi,
Please tell me how to implement the "Jump to Bookmark" in reports,
I mean to say, i have to move to another area or page in a report.
Please provide a sample for the same.
Thanks and Regards
Altaf Nizamuddin
View 1 Replies
View Related
Jun 7, 2006
Is there a way to jump from one report to a specific bookmark in the second report? I have a chart that jumps quite nicely to a filtered version of the report, but instead would like to be able to jump to the entire report at the specific location (e.g., Bookmark) related to the chart data item.
I know that it's quite easy to jump to a bookmark within the same report. What I can't quite determine is how to jump from one report to a specific section in a second report.
Thanks.
View 9 Replies
View Related
Nov 30, 2007
Hello
I have set up a report with a field in a list as a link to another report . I am passing all the parameters in correctly (4 parameters : 1 from a field value and 3 from parameter values). When I run the report and click the link, it jumps to the other report but one parameter is missing a value - the parameter I got from the field value. I really don´t know why this is happening as it was working fine until I added another parameter to the reports and suddenly it doesn´t work anymore.
Is there a limit on the number of parameters I can pass or something?
Please help!
View 5 Replies
View Related
Sep 6, 2007
I'm trying to graduate from Access to SQL and am finding that Access is still meeting my needs better than SQL.
So, I figure I'm doing something wrong.
In Access, I have queries that contain parameters. So far, I've gotten SQL to accept parameters, using =@prompt. But, this seems to be a limited parameter capability. Number one, I can't use a phrase for a prompt. Number 2, I can't do something like Access' Between [upper] And [lower]; I've not found away to use parameters as bounds in SQL.
Any help?
View 5 Replies
View Related
Sep 10, 2007
Hi,
I tried to pass parameter from one report to another report. I can send the parameter using following option:
I used jump to url option and write the following expression:
="javascript:void(window.open('http://hpsi-dev/Reports/Pages/Report.aspx?ItemPath=%2fNextGen+Reports%2fMAUA%2fSales+Order+Detail&rs:Command=Render&SalesOrderNumber="+Fields!SalesOrderNumber.Value+"'))"
and it shows me the following in browser url
http://hpsi-dev/Reports/Pages/Report.aspx?ItemPath=/NextGen+Reports/MAUA/Sales+Order+Detail&rs:Command=Render&SalesOrderNumber=SO43667
now the problem is how to get this ordernumber in my report any option ???pls urgent...any javascript function to take this no into my another report
View 37 Replies
View Related
Apr 21, 2004
I know it's not doable but I thought I should still ask the Gurus on this board:
Can I restore a master database backed up on server A to a new Server B.
Case1: Server A and Server B has the same structure, file system and drive specificiation, I think it's doable in that case.
Case2: Server A and Server B has different file system like c: and d: on A and C: and E: on Server B. It's nor DOABLE right?
Case3: Server A is called Server A and Server B is called B, then also we cannot restore the master database, RIGHT?
View 6 Replies
View Related
Feb 3, 2007
Hi there,
I am making an web application and it involves a spreadsheet object...
now i manage to show the spreadsheet on the web page by using
Response.ContentType = "application/vnd.ms-excel"
Response.Write(sheet.XMLData)
The requirement from my clients is that they wish to modify the spreadsheet on the web -> and then click the save button -> update the database
Can anyone here help me with that? i am using vb.net and the application will be use in LAN
View 1 Replies
View Related
Apr 17, 2007
I am stuck on this and its happening no matter what I do. I have a huge project that holds tons of reports. Most are sub-reports.
I have 5 sections I will just use one for example
communictions (totals)
jump to report - summary data
Jump to report - detail data.
The when I get to the detail data I always get the error:
The path of the item '(null)' is not valid. The full path must be less than 260 characters long; other restrictions apply. If the report server is in native mode, the path must start with slash. (rsInvalidItemPath)
I have tried to do all sorts of things and no matter what I do I cant get it to work.
This is a web application using the ReportViewer for the web, SQL Server 2005 SP2
I have searched high and low for an answer to this and nothing works, not even the get instead of the post.
Any ideas on how I can get this to work?
Thanks
Stokh
View 3 Replies
View Related
Apr 28, 2008
I have a report that uses report parameters and navigation in the textbox.
When I click in the textbox, it jumps to the same report, but I cannot see the report parameters any more(hidden ). I cannot change the report parameters.
When I use only the report paramenters (no navigation option), they appear always during the run time.
How can I do to keep the report parameters visible all the time using "jump to the same report"??
Thank you so much. indyw
View 6 Replies
View Related
Nov 7, 2003
execution plan of procedure shows
bookmark lookup cost : 46%
any way to reduce it ?
Thanks
alex
View 8 Replies
View Related
Apr 26, 2007
okay, so i've been slowly working on an application mostly VB/ASP.Net based that is basically i dummied down query builder. the user selects a bunch of controls off the website, then submits it for a query. the server then executes a dynamic stored procedure, and the website builds a count with the results. i have a couple of questions, i've come to the point where if the query isnt finished inside 30 seconds, the site times out, so i'm looking at a query here, and i have a "BookMark LOOKUP" that is costing me 32% of the query. what can i do to stop that?
how can i get my indexes to perform faster, and is it an issue with the procedure that causes some queries to time out, or is it just the way the data is organized?
View 20 Replies
View Related
Feb 13, 2007
I have a report in reporting services that has a bookmark value asigned to each row. In the following Page_Load event for the page, I'm getting the following error on the ReportViewer1.JumpToBookmark("6") statement:
"An exception of type 'System.InvalidOperationException' occurred in Microsoft.ReportViewer.WebForms.dll but was not handled in user code
Additional information: Some parameters or credentials have not been specified"
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
If Not IsPostBack Then
Dim strReport1 As String = "/ReportDirectory/CurrentWeekSales"
ReportViewer1.ServerReport.ReportServerUrl = New System.Uri(CStr(Session.Item("ReportServer")))
ReportViewer1.ServerReport.ReportPath = strReport1
ReportViewer1.ServerReport.Timeout = 500000
Do While ReportViewer1.ServerReport.IsDrillthroughReport
ReportViewer1.PerformBack()
Loop
Dim RptParameters1 As ReportParameter() = New ReportParameter(0) {}
RptParameters1(0) = New ReportParameter("EBO_EmpKey", CStr(Session.Item("UserKey")))
ReportViewer1.ServerReport.SetParameters(RptParameters1)
ReportViewer1.ServerReport.Refresh()
ReportViewer1.JumpToBookmark("6")
End If
End Sub
What am I missing?
Thanks
View 1 Replies
View Related
Jul 23, 2005
When a nonunique nonclustered index is built on top of a clusteredindex, is it guaranteed that the bookmark in the nonclustered indexwill be kept in the same order as the clustered index?Here's an example to demonstrate my question:CREATE TABLE indextest (col1 int NOT NULL,col2 int NOT NULL,col3int,col4 int)ALTER TABLE indextest ADD PRIMARY KEY CLUSTERED (col1,col2)CREATE INDEX ix_indextest ON indextest (col1,col3)GOINSERT indextest VALUES (1,2,1,1)INSERT indextest VALUES (1,3,2,1)INSERT indextest VALUES (1,4,2,1)INSERT indextest VALUES (2,1,1,1)INSERT indextest VALUES (1,1,1,1)SELECT col1,col2 FROM indextest WHERE col1=1 AND col3=1DROP TABLE indextestThe select statement above is covered by the nonclustered index, sothat index is used. However, the nonclustered index is defined only toensure the ordering of col1 and col3 within the index; col1 and col2follow within the index as the bookmark to the clustered index. When Irun this query, my desired result is to have the records appear in theorder supported by the clustered index:1,11,2As it happens, the result I got was indeed in that order, but I don'tknow if it was mere coincidence, or if the bookmark in the nonclusteredindex is maintained in the same order as the clustered index. If Iwant to ensure the above order, is it sufficient to have thenonclustered index defined as above, or do I need to define it as:create index ix_indextest on indextest (col1,col3,col2)just to be sure that the results are returned in ascending order forcol1,col2? If the two-column index is sufficient, is it guaranteed tostill be sufficient in SQL2005 and future versions of SQL Server, or amI better off adding the third column just to be safe?Thank you,--Dennis Culley
View 4 Replies
View Related
Feb 4, 2006
I notice that SQL Server 2005 creates worktables where SQL 2000 does not. Often these work tables appear in STATISTICS IO, but they show a 0 scan count and 0 logical reads. These worktables often appear to be substituted for bookmark lookups.
Has the optimizer decided to use worktables instead of bookmark lookups (often resulting in a higher cost plan)?
Sharon
View 7 Replies
View Related
Nov 21, 2007
All,
Is there a way to combine the Bookmark and report link functionalities in reporting services. For example, I have two reports. When I click a link in first report, I would like to be able to navigate to second report but not at the top of the report but at a particular report item way down in the second report, sort of like an anchor on an HTML page. Can I do this?
Thanks.
View 1 Replies
View Related
Jun 5, 2015
I am using 2 charts in my SSRS Report. Requirement is to load the Right side chart based on the click event from left chart.
I can achieve it using go to report option. But the issue is total page getting refreshed while using this option. I feel bookmark option will be the best. But I don't think I can pass a value to Bookmarks.
View 2 Replies
View Related
Dec 10, 2006
If you display the execution plan and run the following:SET STATISTICS IO ONgoSELECT ProductID, SupplierIDFROM ProductsWHERE SupplierID = 1I don't understand how come there is noBookmark Lookup operation happening to get theProductID?I only see an Index Seek happening on SupplierID.There is no composite index SupplierID + ProductIDso what am I not understanding here?Thank you
View 3 Replies
View Related
Oct 7, 2011
I want to bookMark from one table to another in current report. Below are the 2 tables , when I select a
FromBrandName in the first table, it should take me to the second table row with the same
FromBrandName. Is this possible? Is there a function to access a specific running value other than First and Last?
View 3 Replies
View Related
May 8, 2007
to open a report in a new window
i looked up the following line of code
=window.open('" & Globals!ReportServerUrl & "?" & Globals!ReportFolder & "/" & "myreport" & "&rs:Command=Render&rc:toolbar=true','','width=800,height=600,left=10,top=10,resizable=1,menubar=no,location=no,status=no'),_top"
I do not understand what & Globals!ReportServerUrl & "?" & Globals!ReportFolder & "/" & "myreport" &
this implies.
I have the current report name as
http://houapps277/ReportServer/Pages/ReportViewer.aspx?%2fIMS-Reports%2fCR000648
and I need to jump to
http://houapps277/ReportServer/Pages/ReportViewer.aspx?%2fIMS-Reports%2fCR000699
both reports are in same folder IMS-Reports.
Thanks
View 3 Replies
View Related
Nov 2, 2006
I use the "jump to url" in a report that links out to a page on our company intranet. Our internal users have to use http and an external user needs to be routed to the site w/ https. How can I account for this in a report?
View 3 Replies
View Related
Apr 2, 2008
Hi...
I want to add two link(navigation) buttons in SINGLE CELL ... if i click on 1st it should navigate to xyz page and if i click on second then it should navigate to abc page...can u pls help me...
Waiting for ur reply...
Roopesh Babu V
View 7 Replies
View Related
Oct 23, 2007
Hi, I am trying to link to a page outside of reporting services from a report. I am using SQL Server 2005 Reporting Services [Standard Edition]. The hyperlink works if it is a straight URL, however, nothing happens if I modify it to use Javascript so I can open the link in a new window. I have found many posts on the web from others indicating it should be really easy, but I can not get the link to recognize ANY Javascript (also tried a basic alert with no luck).
The Javascript I am using is well formatted. I can place it into a test page and it runs fine. I can also RC and View Source on my report, grab the entire link, put it in a test page and it works fine. It just doesn't work from the report - ?
Any ideas?
Thanks in advance,
Francine
View 3 Replies
View Related
May 9, 2008
When you use the Jump to Report feature is there a way to also go to a specific document map link?
View 5 Replies
View Related
Feb 1, 2007
Hi
I want to use Jump to Report option under Navigation tab.
I have two reports both with Same parameters and parameters are multiple value selectable.
In Jump to Report this is how I set the parameter value.
LeadershipTeamId =Join(Parameters!LeadershipTeamId.Value,", ")
CostCentreId =Join(Parameters!CostCentreId.Value,", ")
CostElementGroupId =Fields!CostElementGroupId.Value
This works fine if I have only one value selected for CostCentre and LeadershipTeam but when I select the multiple value I get the following error.
The value provided for the report parameter 'LeadershipTeamId' is not valid for its type. (rsReportParameterTypeMismatch)
Am I missing anything here?
Any help would be highly appreciated.
Best Regards
View 2 Replies
View Related
Jul 27, 2007
I'm trying to put a hyperlink in a field on a report. I've found the action property and set the "Jump To" box with the following:
="http://dveowb01.wbhq.com/UnitsStatusLog/StatusEntry.aspx?Unit=" & Fields!Unit.Value
I'm getting this error message:
The Hyperlink expression for the textbox €˜textbox24€™ refers to the field €˜Unit€™. Report item expressions can only refer to fields within the current data set scope or, if inside an aggregate, the specified data set scope.
Please help.
Thanks,
Jennifer
View 2 Replies
View Related
Mar 5, 2007
Hi all,
I have created a hyperlink(textbox) with an action property setting of "Jump to report" The report I am jumping to takes 5 parameters. I want to pass 4 of the parameters from the main report and have the user enter the 5th. I have mapped the 4 parameters and in preview mode, everthing works great. In preview mode, the parametrs are passed and the last parameter is left waiting for entry. After deployment, this is not the case. In the deployed state, I simply get an error that parameter #5 is blank. Is there there something I am missing?
regards,
Bill
View 2 Replies
View Related
May 11, 2007
Hi all,
Is it possible to use the "jump to report " action and have the report open in a new window?
regards,
Bill
View 3 Replies
View Related
Dec 4, 2007
Hello.
I have a report with a graph in it.
I want to jump to another url when I'm clicking on my report.
I know how to sat the action for clicking inside the report on one of the data number but I want it to jump when I'm ckicking anywhere on the report.
Is there a way to do so?
Thanks.
View 1 Replies
View Related
May 19, 2006
Hi !
When using the Jump to URL function, is it possible to open the URL in a new page instance of doing a redirect?
Thanks !
View 9 Replies
View Related
Jan 24, 2008
Is there a key word one can use to immediately jump out of an iteration when using a cursor, and move to the next record using 'fetch next' cursor?
View 1 Replies
View Related
Sep 11, 2007
Can I have a report that is nothing more than a parameter and when the user selects from the list it will jump to another report based on which parameter was selected?
I can create a report with a text box that I can click to jump. I'd like to be able to eliminate the click on text box if possible and jump directly from parameter select pull down box.
Thanks.
View 3 Replies
View Related
Mar 14, 2008
Hi,
I have a report that uses Jump to Report and passes Reportname with parameter. Is
there a way to suppress the parameter value in the URL so the user is unable
to manipulate the parameter and execute the changed URL?
This is what I have so far..
="http://<servername>/ReportServer?/<folder>/<reportname>&<parametername>="+Fields!<fieldname>.Value.tostring
because when reports exported to excel, hyperlink path will be displayed and should not display to the user.
Or can we set Hyperline action dyamically?
Thank you.
RSUser
View 4 Replies
View Related
