Hello,
i am in great trouble. I want to revert back to original state of
database before i performed restore database on my sql server 2K
Database. Accidently i didn't take backup of my Database and i did
restore, so is there any way to get the original state back of my
Database?
Any suggestion will be highly appriciated.
Regards,
S. Domadia.
What's the diffrence between the Built-In account 'SERVICES' and the 'NT SERVICEALL SERVICES' ?I want to dploy a group poicy for 'user right assignment' -Â 'log on a service' to a server, which curretnly has among other things the 'NT SERVICEALL SERVICES'Â however i can't replicate this account for my GPO, (even locally on the server),I deploy the GPO and overwrite the server settings for 'user right assignment' -Â 'log on a service' and won't be able to revert back to the original settings..
View 5 Replies View RelatedI cannot open now my database after changing it name from the folder where it is save and also changed back to its original name.Message recovery pending now is appearing as shown below.Any chance that I could recover my database back?
View 17 Replies View RelatedHello,
I am using a SQL Database.
I want to know if there is a way to restore a database to an early state.
i made some changes on the entries and now the relations between tables are all messed up.
Need your help.
Thanks in advance.
I had to transfer my database from one server to another. Both are running SQL 2000. I backed the database up and moved it to the new server however when I try to do a restore I get the following message:
The media set for database "xxx' has 2 family members but only 1 are provided. RESTORE DATABASE is terminating abnormally.
I did some searching and found a couple of posts that mentioned something about the back up including 2 files.
My problem is that the machine I backed this up from crashed when it was shut down and would not reboot so all of the data and the original database do not exist. Is there any hope of restoring this database. It is pretty critical.
Thanks,
Melissa :-)
Hi,
I backed my sql server database on Fri at 3:15pm and then tried importing some tables individually from a different database and but that didnt work out too good, so is there a way i can just restore particular tables from the backup.
any help will be appreciated.
regards,
Karen
I need to back up a production database on one server and then copy it to a test server wherel it will be restored. The problem is that I don't know where to move the file to on the production server before I restore it. Is there a special folder I need to copy the file to? I see a folder named ProgramFilesMicrosoft SQL Server but beyond that I have no idea where to copy the file so that it can be restored?
Can someone help me out please?
I want to give a facility to backup database restore database to the customer in my project.
Database is stored in sql server 2000.
From the website the browser can take backup by clicking BACKUP button and
restore database by clicking RESTORE button.
is it possiable in asp.net programatically ?
I am maintaining a .net 1.0 asp.net web application that accesses a SQL server 2000 database. I need to backup the database and then restore it on a laptop. Currently it resides on a server. The problem is that on the server they are using sql server 2005. If I backup using 2005 and then try and restore this database using SQL server 2000 or 2005 on the laptop, I get an error message. "Too many backup devices specified for backup or restore; only 64 are allowed. RESTORE DATABASE is terminating abnormally.
What can I do to restore the database? Must it be backed up with SQL server 2000 and then restored with SQL Server 2005?
Please help!
Hello guys
My server crashed but luckily I was not able to get back my files with help of recovery software.
Now, all I have from the database are just sql server database primary data .mdf and sql server databaseTransaction Log Files .ldf. I need to restore these data back to sql server.
Please could someone tell me how to restore these two file types back to my sql sever 2007 database?
Thanks
netboy
Hi!
I have an original database that I want to copy once to another database. Then I want to update the data weekly with the data of the original database. I don€™t change any tables or columns in that part of the database. Just some tables more in the €˜new€™ database (than the tables from the original database) with some references to the tables that have to be updated weekly.
How can I do this? (if you know what I mean... it's a sort of a datawarehouse where different sources come together.. that part that represents the original database is just a part of the datawarehouse. That part is exactly the same structure as the original database.)
Thanks,
Sandra
I have noticed rather strange behaviour of EXECUTE AS and REVERT sequence during the cross database calls which appear to be a bug. I tested this issue on developer edition of SQL Server 2012
Microsoft SQL Server 2012 - 11.0.5343.0 (X64)
 May 4 2015 19:11:32
 Copyright (c) Microsoft Corporation
 Developer Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
This issue causes problems in SSISDB where similar piece of code appears in [catalog].[start_execution] and some other scripts in the [internal] schema. This was previous discussed in [URL] The following script illustrates the issue:
USE [master]
GO
CREATE DATABASE [Test1]
GO
CREATE DATABASE [Test2]
GO
-- Set Database to Trustworthy to allow cross database connection
ALTER DATABASE [Test1] SET TRUSTWORTHY ON;
GO
ALTER DATABASE [Test2] SET TRUSTWORTHY ON;
GO
USE [Test2]
GO
CREATE PROCEDURE [dbo].[TestContext]
AS
SELECT 'EXECUTION CONTEXT BEFORE EXECUTE AS CALLER', SUSER_NAME(), USER_NAME();
[code]....
I have a database called PrimaryJunk that is being log shipped to another location, secondary database is secondaryjunk. From PrimaryJunk to SecondaryJunk logs ship and apply fine with no issues. So I figured lets make sure that I am able to perform a role change and swap the roles and that is not working well. My original primary db is stuck in restoring state.
I manually backed up the active transaction log on primary server by performing a transaction log backup with the option 'backup the tail of the log and leave the db in restoring state'
MS site has the same step but mentions NORECOVERY. I am not sure if my step above does that automatically. http://msdn2.microsoft.com/en-us/library/ms191233.aspx
Wonder if thats the reason my original primary db is still in restoring state. any idea?
I copied and added an existing package as a new package to a project and have been having trouble with settings reverting to those for the original package after I modify and save the changes for the new package. Sometimes happens with the save itself, other times it happens when I close and re-open the package. Most cases are with connections that revert back to the original file reference, but there are also control flow and data flow elements that keep reverting back to either settings from the original package or defaults that result in the re-opened package being in error. Not sure how to get around this issue short of developing the new package from scratch which I'd rather not do since it is fairly complex. Any help anyone can provide is appreciated. Thanks.
View 8 Replies View RelatedWhen I drill down from one report to another and then depress the back button to return to the initial report, the message 'Generating Report" spins forever without actually running. However, if I depress the regenerate button during this time, it will run the report.
I believe that I may have inadvertingly reset a field attribute to have caused this condition. Ironocally, I have the same set of database installed on another server, and the this does not happen.
I forgot to mention that I am using Report Manager to deploy the reports.
Please assist.
When I drill down from one report to another and then depress the back button to return to the initial report, the message 'Generating Report" spins forever without actually running. However, if I depress the regenerate button during this time, it will run the report.
I believe that I may have inadvertingly reset a field attribute to have caused this condition. Ironocally, I have the same set of database installed on another server, and the this does not happen.
I forgot to mention that I am using Report Manager to deploy the reports.
Please assist.
New to Database Mirroring and I have a question about the Principal database server. I have a Database Mirroring setup configured for High-safety with automatic fail over mode using a witness.
When a fail over occurs because of a lost of communication between the principal and mirror, the mirror server takes on the roll of Principal. When communication is returned to the Principal server, at some point does the database that was the previous Principal database automatically go back to being the Principal server?
Hi All,
How can I find out the original size of the database?
Thanks.
I am trying to use SQL Express to support unit testing of functionality which requires database access.
I created an express database (.mdf) which contains a database snapshot which is the database environment that each test expects to see when it starts. Through the execution of the test the database will be modified arbitrarily and I need to reset the database to the original state before the next test executes.
Here's what I do today:
Before Test:
The original database is copied to a unique location in the temp directory
A unique database name is generated (GUID-based)
I connect to the new database file with:
Server=.SQLEXPRESS;AttachDbFilename="PathToTempFile";Database="GuidDBName";Initial Catalog="GuidDBName";Trusted_Connection=Yes;User Instance=true
During the test all database access is routed to the temporary database GuidDBName
After Test:
Close all active database connections and clear the connection pool
Connect to the master database and detach the database:
Server=.SQLEXPRESS;Database=master;Initial Catalog=master;Trusted_Connection=Yes;User Instance=true - sp_detach_db 'GuidDBName'
Delete the temporary file
When I do this, everything seems to work correctly but when I re-open the original database it has changed unexpectedly and includes the modifications that were made by the test as it ran.
Can anyone explain why this is happening and/or provide a solution?
Hi all
Iam working in Prodcution ENV,Please help how make space
The log file for database 'Home_alone' is full. Back up the transaction log for the database to free up some log space.
Hi,Good morning to All.
While doing practice I did some modifications to some tables in Northwind database.Now, how can I get my original tables back again?
Take Oracle for example:We can modify table data. But when we run demobld.sql script then all tables will replaces with original entries.
Like this I want in SQL Server also. Is there any such facility available in SQL Server?
Thanks in advance,Ashok kumar.
I made a copy of a database "sac_prod" and named the new copy "vgs_prod". Now, when I do a backup of the new database, it still shows the name of the original. Is there any way to change this so it will be the same as the new database name?Here is the BACKUP script:BACKUPdatabase vgs_prod TODISK='\sac-srvr1data$TechnicalSharedProductionSQLBackup LasVegasvgs_prod_CopyOnly.BAK' with COPY_ONLYHere is the messages I received from this BACKUP:Processed 1752 pages for database 'vgs_prod', file 'sac_prod' on file 1.Processed 6 pages for database 'vgs_prod', file 'sac_prod_log' on file 1.BACKUP DATABASE successfully processed 1758 pages in 0.412 seconds (34.955 MB/sec). I would like to change the file 'sac_prod' to be 'vgs_prod' in lines 1 and 2 just above. Thanks,
View 2 Replies View RelatedCan someone provide a step by step tutorial for this? I'd like to safely update a database that is used for a website without much or any downtime.
View 1 Replies View Related
Hello all...
I am working on a project that contains several databases in SQL and many settings. The problem I am encountering is that I want to be able to update the program for all my customers. That is no problem.
The problem I am meeting is where, when the program is updated, all the settings and all the information in the databases reverts to the default values, or the values that were compiled with the new update.
I want to be able to update their program without deleting all the settings they have.
Thanks,
Andreas Renberg
The 2.0 version of ASPSTATE is slightly different than the 1.1 version in that one table has one additional column and another table uses a different data type and size for the key. The 2.0 version also has a couple additional stored procedures.
We'd like to manage just one session state database if possible so we're trying to figure out if Microsoft supports using the new schema for 1.1 session state access (it seems to work, but our testing has been very light).
Is there any official support line on this? If not, can anyone comment on whether or not you'd expect it to work and why?
Thanks.
I'm having a problem with a Maintenance Plan created for SQL Server 2005 using Microsoft SQL Server Management Studio. See version information at the bottom of this post.
I have a Maintenance Plan using the "Back Up Database Task" that is set to perform a "Full" back up of "All Databases" on the local server. However, it appears that the list of "All databases" are hard-coded to be those databases that were available at the time the task was created. It seems any newly created databases don't appear to be in the list. If I attempt to edit the task and select the "These databases:" option, the newly created databases aren't even in the list.
Is there some way to have the task refresh the list of the databases available for backup? Ideally, I'd like any newly created databases to get backed up automatically without having to modify the task.
Thanks for your help,
Jonathan.
Microsoft SQL Server Management Studio 9.00.3042.00
Microsoft Analysis Services Client Tools 2005.090.3042.00
Microsoft Data Access Components (MDAC) 2000.086.3959.00 (srv03_sp2_rtm.070216-1710)
Microsoft MSXML 2.6 3.0 4.0 6.0
Microsoft Internet Explorer 7.0.5730.11
Microsoft .NET Framework 2.0.50727.42
Operating System 5.2.3790
I have a problem when i restore my .DAT_BAK file. I am getting error like "The backup set holds a backup of a database other than existing database. Restore Database is terminating abnormally".
I tried by using
RESTORE DATABASE <DATABASENAME>
FROM DISK = 'D:DATAMYTEST.DAT_BAK'
WITH MOVE 'VZAI_DATA' TO D:PROGRAM FILES..MSSQLTEST.MDF',
MOVE 'VZAI_LOG' TO D:PROGRAM FILES..MSSQLTEST.LDF',
REPLACE
And also i tried like
RESTORE DATABASE <DATABASENAME>
FROM DISK = 'D:DATAMYTEST.DAT_BAK'
WITH REPLACE
When i use like this,
RESTORE FILELISTONLY FROM DISK = 'D:DATAMYTEST.DAT_BAK'. I am able to get the output as LogicalName, PhysicalName, Type, FileGroupName, Size, etc.
Can i anyone please help me out?
Thanks in Advance,
Anand Rajagopal
I'm taking a database(read-only) backup from one server and restoring it on other server. As soon as restore is done it is bringing database into single-user read-only mode.
why it is bringing the database into single user mode ?
LocalDb cannot restore a backup whose original data and log files are in different folders
[URL]
Anybody figure a way around this:
In a development server you take a backup and you want to move the entire database to a production server. The production server does not contain the database, users, or logins in master.
When you restore the backup to production in 7.0, the users get moved to DBO because the logins do not exist and then you cannot delete them.
We are having to drop the users from the database on development, back up the database and restore it to production, then recreate the users on production.
This is bogus and did not happen in 6.5 because of the aliases.
Anybody come up with a better way?
I am fairly new to VS 2005 and SQL Server CE. I have developed a Desktop Windows application using VB 2005 and the SQL Compact Edition Database. This application will sell to users via web download.
When they download a service patch, or updated version, I wish for them to retain the data in their present database. In other words, fill the new database with the old data. The new table structures will remain intact except for added columns at the end.
Question is how to save the old data and update the new database with it. Is there an easy way to do this, or do I need to write a module to save a database copy, and update the new database with content at install time?
Hi All,I am facing this issue very frist time. I add a logical device asfollowing:USE masterGOEXEC sp_addumpdevice 'disk', 'AdvWorksData','C:Program FilesMicrosoft SQLServerMSSQL.1MSSQLBACKUPAdvWorksData.bak'-- Create a logical backup device, AdvWorksLog.USE masterGOEXEC sp_addumpdevice 'disk', 'AdvWorksLog','C:Program FilesMicrosoft SQLServerMSSQL.1MSSQLBACKUPAdvWorksLog.bak'-- Back up the full AdventureWorks database.BACKUP DATABASE AdventureWorks TO AdvWorksData-- Back up the AdventureWorks log.BACKUP LOG AdventureWorksTO AdvWorksLogThe database backup is completed successfully but log's backup failswith the following messages:Msg 4214, Level 16, State 1, Line 1BACKUP LOG cannot be performed because there is no current databasebackup.Msg 3013, Level 16, State 1, Line 1BACKUP LOG is terminating abnormally.We are moving from SQL 2000 to SQL 2005. I have ensured that databasehas full recovery mode on. We are using SQL 2005 on Windows 2003 ServerSP1.Further more, I also created a plan to test it, and plan also failswhen backing up the logs.Can anyone shed some light on this issue.Thanks in advance.Najm
View 1 Replies View RelatedHi,
I have a MS SQL Server 2005 Enterprise Edition 9.0.2153 which manages my BizTalk Server 2006 Databases. The BizTalk server installer automatically creates a job named Backup BizTalk Server (BizTalkMgmtDb) which should back up the databases and transaction protocolls.
The SQL Server Agent runs under domain-administrator account which has full access to my backup directory D:ackups.
The job executes the following steps:
Step 1: BackupFull:
Command:
exec [dbo].[sp_BackupAllFull_Schedule] 'd' /* Frequency */, 'BTS' /* Name */, 'D:Backups' /* location of backup files */
Step 2: MarkAndBackupLog
Command:
exec [dbo].[sp_MarkAll] 'BTS' /* Log mark name */, 'D:Backups' /* location of backup files */
My challenges are:
1. The job doesn't back up my databases(D:Backups is empty after executing the job)
2. I get every time the following error in error protocol of the job:
BACKUP LOG cannot be performed because there is no current database backup. [SQLSTATE 42000] (Fehler 4214) BACKUP LOG is terminating abnormally. [SQLSTATE 42000] (Fehler 3013).
I have already switched the Databases from full to simple recovery mode and vica versa, it didn't help. Also, the above stored procedures doesn't include neither the TRUNCATE nor the LOG parameters for the logfiles so I wasn't able to solve this issue by adjusting these flags.
Any help would be appreciated.
Thanks in advance,
Greg