IF Statement Out Of Control

Apr 18, 2008

I've got an IF Statement with a mind of it's own.

Code associated with IF statement ALWAYS RUNS???

ALWAYS passing PostParentID = 0 into SP.
ALWAYS SKIPS Print Statement #2 in Messages Window.

Don€™t know if this is helpful€¦




--************* Insert Comment Summary Table Record ****************************
PRINT 'PRINT STATEMENT #1'
PRINT @PostParentID
IF (@PostParentID > 0) --AND (@CommentSummaryID = 0 OR LEN(@CommentSummaryID) = 0 OR @CommentSummaryID IS NULL)
PRINT 'PRINT STATEMENT #2'
PRINT @PostParentID
DECLARE @CommentCount int
SET @CommentCount = 1
DECLARE @LastUpdate DATETIME
SET @LastUpdate = GETDATE()
INSERT INTO [syl_CommentSummaries]
VALUES(
@PostID,
@CommentCount,
@LastUpdate)

SET @CommentSummaryID = (SELECT CommentSummaryID
FROM syl_CommentSummaries
WHERE PostID = @PostID)
SELECT @CommentSummaryID
UPDATE syl_Posts
SET CommentSummaryID = @CommentSummaryID
WHERE PostID = @PostID


Message Window Output:

PRINT STATEMENT #1
0
0

(1 row(s) affected)

(1 row(s) affected)

View 6 Replies


ADVERTISEMENT

SELECT Statement Beyond My Control!

Aug 11, 2005

I have been struggling with a query for sometime now, so I though I would see if anyone could help me out.Here is what I am trying to accomplish:  I have a reservation page that has a dropdown list control on it.  I am trying to populate the dropdown list with the available areas that have not already been reserved for the day.  I have two tables, one of them contains the list of all of the areas that can be reserved.  The second table contains the current reservations.Please let me know if I have not explained myself well enough and i will try to do expound better.Here is what I have so far, but it seems to give me results for the entire table, not just that day in particular.  SELECT    tbl_Hunting_Area.Area, tbl_Hunting_Area.Area_ID, tbl_Blinds.Area_ID, tbl_Blinds._DateFROM      tbl_Hunting_Area CROSS JOIN tbl_BlindsWHERE     (tbl_Hunting_Area.Area_ID <> tbl_Blinds.Area_ID) AND   tbl_Hunting_Area.Area_ID NOT IN   (SELECT tbl_Blinds.Area_ID FROM tbl_Blinds AS tbl_Blinds_1 WHERE   (tbl_Blinds._DATE = '8-11-2005'))Here are the results that I receive from this query:Goose Field #2 2 1 2005-08-09 00:00:00.000Goose Field #3 3 1 2005-08-09 00:00:00.000Goose Field #4 4 1 2005-08-09 00:00:00.000Pond #1 - Pit Blind 5 1 2005-08-09 00:00:00.000Pond #1 - Shore Blind 6 1 2005-08-09 00:00:00.000Pond #2 7 1 2005-08-09 00:00:00.000Goose Field #1 1 6 2005-08-09 00:00:00.000Goose Field #2 2 6 2005-08-09 00:00:00.000Goose Field #3 3 6 2005-08-09 00:00:00.000Goose Field #4 4 6 2005-08-09 00:00:00.000Pond #1 - Pit Blind 5 6 2005-08-09 00:00:00.000Pond #2 7 6 2005-08-09 00:00:00.000Goose Field #1 1 7 2005-08-11 00:00:00.000Goose Field #2 2 7 2005-08-11 00:00:00.000Goose Field #3 3 7 2005-08-11 00:00:00.000Goose Field #4 4 7 2005-08-11 00:00:00.000Pond #1 - Pit Blind 5 7 2005-08-11 00:00:00.000Pond #1 - Shore Blind 6 7 2005-08-11 00:00:00.000Goose Field #1 1 5 2005-08-11 00:00:00.000Goose Field #2 2 5 2005-08-11 00:00:00.000Goose Field #3 3 5 2005-08-11 00:00:00.000Goose Field #4 4 5 2005-08-11 00:00:00.000Pond #1 - Shore Blind 6 5 2005-08-11 00:00:00.000Pond #2 7 5 2005-08-11 00:00:00.000

View 8 Replies View Related

Problem With Flow Control Statement In UDF

Apr 9, 2008

Greetings,

I have run into a problem while creating a simple UDF on SQL Server 2000.




Code Snippet

CREATE FUNCTION [dbo].[GetSectionNum] (@section varchar(4))
RETURNS varchar(2)
AS
BEGIN
DECLARE @sTemp varchar(2),@s char
DECLARE @count int
DECLARE @length int

set @length = LEN(@section)
set @count = 1

WHILE (@count <= @length)
BEGIN
SET @s = SUBSTRING(@section,@count,1)
IF(ISNUMERIC(@s))
BEGIN
SET @sTemp = @sTemp + @s
END
SET @count = @count + 1
END

IF(LEN(@sTemp) = 1)
BEGIN
SET @sTemp = '0' + @sTemp
END

RETURN @sTemp
ENDWhen I perform a syntax check I receive and error about "Error 156: incorrect syntax near keyword 'BEGIN'. I have narrowed the problem to the IF statement inside the While block. If I remove the IF statement the syntax check is successful. This is the first UDF I have written so I'm swimming in uncharted water. Thanks ahead of time for your help.

View 3 Replies View Related

UPDATE Statement Syntax Help Required C# && SqlDataSource Control

May 3, 2007

Hi,
I need to UPDATE the IP Address of a newly created user into a table (the value is currently set to default - " Not Available"), and I really dont know the syntax required to do this. So far I've derived all the variables needed using the following code:
protected void ContinueButton_Click(object sender, EventArgs e)
{
//Get the ip address and put it into the customer table - (the instance of this user now exists)
MembershipUser _membershipUser = Membership.GetUser();
Guid UserId = (Guid)_membershipUser.ProviderUserKey;<--------------------------------------------------------------I can see the UserId here if I pause the prog
SqlDataSource customerDataSource = new SqlDataSource();
customerDataSource.ConnectionString = ConfigurationManager.ConnectionStrings["ConnectionString"].ToString();
customerDataSource.UpdateParameters.Add("IPAddress", Request.UserHostAddress.ToString());<---------------------------------------I can see the IPAddress here
customerDataSource.UpdateCommandType = SqlDataSourceCommandType.Text;
 what next
I've not got a clue as to what to write next. There is a try / catch statement after this using :
rowsAffected = customerDataSource.Update();
which remains at 0 no matter what I try.
Any help greatly appreciated.

View 15 Replies View Related

[:#] Problems Viewing The Custom Sql Statement In The Gridview Control

Jul 28, 2007

Hi,
 I really need some help trying to figure out why my gridview is not working when I create a custom sql statement. It "executes" the query, but gives me an error message when I "test the query". Here is the error message: "There was an error executing the query. Please check the syntax of the command and if present, the types and values of the parameters and ensure they are correct. Syntax error: Expecting '.', identifier or quoted identifier."
Here is my sql statement:
SELECT     TBLPROJECTS.NAME, TBLPROJECTTYPES.NAME AS PROJECTTYPE, TBLPROJECTS.DESCRIPTION, TBLUSERS_1.LOGIN AS OWNERNAME,                       TBLUSERS.LOGIN AS MANAGERNAME, TBLPROJECTS.START_DATE, TBLPROJECTS.END_DATE, TBLAOI.NAME AS AREAOFINTEREST,                       TBLPROJECTS.MANPOWER, TBLUNITS.NAME AS MANPOWERUNITFROM         TBLPROJECTS INNER JOIN                      TBLAOI ON TBLPROJECTS.AOI_ID = TBLAOI.ID INNER JOIN                      TBLPROJECTTYPES ON TBLPROJECTS.PROJECTTYPE_ID = TBLPROJECTTYPES.ID INNER JOIN                      TBLUNITS ON TBLPROJECTS.MANPOWERUNITS_ID = TBLUNITS.ID INNER JOIN                      TBLUSERS ON TBLPROJECTS.MANAGER_ID = TBLUSERS.ID INNER JOIN                      TBLUSERS TBLUSERS_1 ON TBLPROJECTS.OWNER_ID = TBLUSERS_1.ID
I have tested it on a new project and still it does not work, I cannot find any problem, please help!!!!!!!!!!!!!!!!!!!!!!!!
 

View 5 Replies View Related

Error When Using A Create Table Execute SQL Task Statement In Control Flow Prior To Using An OLE DB Destination Container...

May 18, 2008

SSIS Newbie Question:

I have a simple Control Flow setup that checks to see if a particular table exists. If the table does not exists, the table is created in an alternate path, if it does exist, the table is truncated before moving to a file import Data Flow that uses an OLE DB Destination to output the imported data.

My problem is, that I get OLE DB package errors if the table the OLE DB Destination Container references does not exist when I load the package.

How can I over come this issue? I need to be able to dynamically create the table in an earlier step, then use that table to import data into in a later step in the workflow.

Is there a switch I can use to turn off checking in the OLE DB Destination Container so that it will allow me to hook up the table creation step?

Seems like this would be a common task...

Steps:

1. Execute SQL Task to see if the required table exists
2. Use expresions to test a variable to check the results of step 1
3. If table exists, truncate the table and reload it from file in Data Flow using OLE DB Destination
4. If table does not exist, 1st create it, then follow the normal Data Flow

Can someone help me with this?

Signed: Clueless with a deadline approaching...

View 3 Replies View Related

Issue With SSRS Report Exporting To Excel With The Matrix Control Inside The Table Control

Jan 27, 2008

Hi All,
I am placing a Matrix inside the table control for grouping requirements,but when we export the report to the Excel, the contents inside the table cell are ignored. Is there any way to get the full report exported, as per the Requirement.Please help me with this issue.

With Thanks
M.Mahendra

View 5 Replies View Related

Is There A Way To Set A Variable In A Data Flow From A SQL Statement (like In Control Flow)

Jan 12, 2006

I'm currently setting variables at the package level with an ExecuteSQL task.  This works fine.  However, I'm now starting to think about restartability midway through a package.  It would be nice to have the variable(s) needed in a data flow set within the data flow so that I only have to restart that task. 

Is there a way to do that using an SQL statement as the source of the value in a data flow? 

OR, when using checkpoints will it save variable settings so that they are available when the package is restarted?  This would make my issue a moot point.

View 2 Replies View Related

Is It Possible To Embbed And Ocx Control On A Report Or Some Sort Of Interactive Control Like A Flash.ocx?

Oct 25, 2007

does any one have and example of how to embedd a flash swf file onto a report.??? Is it possable? any examples would be helpful.

View 1 Replies View Related

Reporting Services From WebBrowser Control - Print = Unable To Load Client Print Control

Mar 20, 2007

UPDATE #2: When it said "Do you want to install Microsoft SQL Server" I said "yes" and that caused it to work. I exited and re-ran and now the print runs w/o the "install SQL Server" (If the prompt had said "Do you want to install the print dialog" we wouldn't be having this discussion...) 





UPDATE: After posting this i discovered that the same thing occurs when attempting to print the report direct from IE6: First a dialog pops up "Do you want to install this software?" Name: Microsoft SQL Server. When I click "Don't Install" I get the dialog "unable to load client print control." Since this happens direct from IE6 I suspect it's browser settings. I'll resume tomorrow and post a followup.







My WinForm C# app integrates Reporting Services by calling them from WebBrowser controls. The problem is attempts to print cause a dialog: "unable to load client print control."

I've read prior posts that say "enable Active-X in your browser" - I don't know how to do that from a WebBrowser control.



Any ideas how to support Reporting Services "Print" from within a WebBrowser control?

RELATED THREADS

http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=332145&SiteID=1

http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=264478&SiteID=1

 

 

View 1 Replies View Related

Multiple Tables Used In Select Statement Makes My Update Statement Not Work?

Aug 29, 2006

I am currently having this problem with gridview and detailview. When I drag either onto the page and set my select statement to pick from one table and then update that data through the gridview (lets say), the update works perfectly.  My problem is that the table I am pulling data from is mainly foreign keys.  So in order to hide the number values of the foreign keys, I select the string value columns from the tables that contain the primary keys.  I then use INNER JOIN in my SELECT so that I only get the data that pertains to the user I am looking to list and edit.  I run the "test query" and everything I need shows up as I want it.  I then go back to the gridview and change the fields which are foreign keys to templates.  When I edit the templates I bind the field that contains the string value of the given foreign key to the template.  This works great, because now the user will see string representation instead of the ID numbers that coinside with the string value.  So I run my webpage and everything show up as I want it to, all the data is correct and I get no errors.  I then click edit (as I have checked the "enable editing" box) and the gridview changes to edit mode.  I make my changes and then select "update."  When the page refreshes, and the gridview returns, the data is not updated and the original data is shown. I am sorry for so much typing, but I want to be as clear as possible with what I am doing.  The only thing I can see being the issue is that when I setup my SELECT and FROM to contain fields from multiple tables, the UPDATE then does not work.  When I remove all of my JOIN's and go back to foreign keys and one table the update works again.  Below is what I have for my SQL statements:------------------------------------------------------------------------------------------------------------------------------------- SELECT:SELECT People.FirstName, People.LastName, People.FullName, People.PropertyID, People.InviteTypeID, People.RSVP, People.Wheelchair, Property.[House/Day Hab], InviteType.InviteTypeName FROM (InviteType INNER JOIN (Property INNER JOIN People ON Property.PropertyID = People.PropertyID) ON InviteType.InviteTypeID = People.InviteTypeID) WHERE (People.PersonID = ?)UPDATE:UPDATE [People] SET [FirstName] = ?, [LastName] = ?, [FullName] = ?, [PropertyID] = ?, [InviteTypeID] = ?, [RSVP] = ?, [Wheelchair] = ? WHERE [PersonID] = ? ---------------------------------------------------------------------------------------------------------------------------------------The only fields I want to update are in [People].  My WHERE is based on a control that I use to select a person from a drop down list.  If I run the test query for the update while setting up my data source the query will update the record in the database.  It is when I try to make the update from the gridview that the data is not changed.  If anything is not clear please let me know and I will clarify as much as I can.  This is my first project using ASP and working with databases so I am completely learning as I go.  I took some database courses in college but I have never interacted with them with a web based front end.  Any help will be greatly appreciated.Thank you in advance for any time, help, and/or advice you can give.Brian 

View 5 Replies View Related

SQL Server 2012 :: Create Dynamic Update Statement Based On Return Values In Select Statement

Jan 9, 2015

Ok I have a query "SELECT ColumnNames FROM tbl1" let's say the values returned are "age,sex,race".

Now I want to be able to create an "update" statement like "UPATE tbl2 SET Col2 = age + sex + race" dynamically and execute this UPDATE statement. So, if the next select statement returns "age, sex, race, gender" then the script should create "UPDATE tbl2 SET Col2 = age + sex + race + gender" and execute it.

View 4 Replies View Related

Using Conditional Statement In Stored Prcodure To Build Select Statement

Jul 20, 2005

hiI need to write a stored procedure that takes input parameters,andaccording to these parameters the retrieved fields in a selectstatement are chosen.what i need to know is how to make the fields of the select statementconditional,taking in consideration that it is more than one fieldaddedfor exampleSQLStmt="select"if param1 thenSQLStmt=SQLStmt+ field1end ifif param2 thenSQLStmt=SQLStmt+ field2end if

View 2 Replies View Related

TSQL - Use ORDER BY Statement Without Insertin The Field Name Into The SELECT Statement

Oct 29, 2007

Hi guys,
I have the query below (running okay):



Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
FROM myTables
WHERE Conditions are true
ORDER BY Field01

The results are just as I need:


Field01 Field02

------------- ----------------------

192473 8461760

192474 22810



Because other reasons. I need to modify that query to:



Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
INTO AuxiliaryTable
FROM myTables
WHERE Conditions are true
ORDER BY Field01
SELECT DISTINCT [Field02] FROM AuxTable
The the results are:

Field02

----------------------

22810
8461760

And what I need is (without showing any other field):

Field02

----------------------

8461760
22810


Is there any good suggestion?
Thanks in advance for any help,
Aldo.

View 3 Replies View Related

DB Engine :: Can't Use The MERGE Statement / How To Design WHERE Condition For Insert Statement

Nov 5, 2015

I've have a need with SQL Server 2005 (so I've no MERGE statement), I have to merge 2 tables, the target table has 10 fields, the first 4 are the clustered index and primary key, the source table has the same fields and index.Since I can't use the MERGE statement (I'm in SQL 2005) I have to make a double step operation, and INSERT and an UPDATE, I can't figure how to design the WHERE condition for the insert statement.

View 2 Replies View Related

SQL Server 2012 :: Update Statement With CASE Statement?

Aug 13, 2014

i was tasked to created an UPDATE statement for 6 tables , i would like to update 4 columns within the 6 tables , they all contains the same column names. the table gets its information from the source table, however the data that is transferd to the 6 tables are sometimes incorrect , i need to write a UPDATE statement that will automatically correct the data. the Update statement should also contact a where clause

the columns are [No] , [Salesperson Code], [Country Code] and [Country Name]

i was thinking of doing

Update [tablename]
SET [No] =
CASE
WHEN [No] ='AF01' THEN 'Country Code' = 'ZA7' AND 'Country Name' = 'South Africa'
ELSE 'Null'
END

What is the best way to script this

View 1 Replies View Related

How To Write Select Statement Inside CASE Statement ?

Jul 4, 2006

Hello friends,
I want to use select statement in a CASE inside procedure.
can I do it? of yes then how can i do it ?

following part of the procedure clears my requirement.

SELECT E.EmployeeID,
CASE E.EmployeeType
WHEN 1 THEN
select * from Tbl1
WHEN 2 THEN
select * from Tbl2
WHEN 3 THEN
select * from Tbl3
END
FROM EMPLOYEE E

can any one help me in this?
please give me a sample query.

Thanks and Regards,
Kiran Suthar

View 7 Replies View Related

Transact SQL :: Update Statement In Select Case Statement

May 5, 2015

I am attempting to run update statements within a SELECT CASE statement.

Select case x.field
WHEN 'XXX' THEN
  UPDATE TABLE1
   SET TABLE1.FIELD2 = 1
  ELSE
   UPDATE TABLE2
   SET TABLE2.FIELD1 = 2
END
FROM OuterTable x

I get incorrect syntax near the keyword 'update'.

View 7 Replies View Related

T-SQL Control Of DTS

Aug 10, 2000

Hi,

I want to be able to alter the filename that my DTS package imports programmactically with a T-SQL stored procedure.

Is this possible, I really dont want to write a VB/COM package just to do this!

Jason

View 1 Replies View Related

Compiler Is Not Recognizing My Using Statement For SglConnection Statement

Feb 4, 2006

I am using ASP.NET 2.0, and am attempting to write some code to connect to the database and query a data table. The compiler is not recognizing my SqlConnection statement. It does recognize other commands. And just to make sure, I created other sql objects such as ObjectDataSource and SqlDataSource. The compiler does not find a problem with that code.
Basically the compiler is telling me that I am missing a "using" directive. The compiler is wrong though, because I am including the statement "usingSystemData" Can someone please take a look at my code below and to see if you notice what the problem might be?  Note that I numbered the lines of code below. Note that I also tried putting lines 3 trhough 6 before line 2(The page directive) but that did not fix the problem The compiler still gives me the same compiler message.
Compilation Error
Description: An error occurred during the compilation of a resource required to service this request.Please review the following specific error details and modify your source code appropriately.
Compiler Error Message: CS0246: The type or namespace name 'SqlConnection' could not be found (are you missing a using directive or an assembly reference?)Source Error:
Line 21: SqlConnection sqlConn = new SqlConnection("server=localhost;uid=sa;pwd=password;database=master;");
1 <asp:sqldatasource runat="server"></asp:sqldatasource>
2 <%@ Page Language="C#"%>
3 using System;
4 using System.Data;
5 using System.Collections;
6 using System.Data.SqlClient;
7
8 <script runat=server>
9
10 protected void Page_Load(object o, EventArgs e)
11 {
12 ObjectDataSource dsa; // This works no problems from the compiler here
13 SqlDataSource ds; // This works no problems from the compiler
14
15 if (IsPostBack)
16 {
17 if (AuthenticateUser(txtUsername.Text,txtPassword.Text))
18 {
19 instructions.Text = "Congratulations, your authenticated!";
20 instructions.ForeColor = System.Drawing.Color.Red;
21 SqlConnection sqlConn = new SqlConnection("server=localhost;uid=sa;pwd=password;database=master;");
22 String sqlStmt = "Select UserName from LogIn where UserName='" + txtUsername.Text + "' and password='" + sHashedPassword + "'";
23 }
24 else
25 {
26 instructions.Text = "Please try again!";
27 instructions.ForeColor = System.Drawing.Color.Red;
28 }
29 }
30
31 }
32
33 bool AuthenticateUser(string username, string password)
34 {
35 // Authentication code goes here
36
37 }

View 1 Replies View Related

Case Statement Error In An Insert Statement

May 26, 2006

Hi All,
I've looked through the forum hoping I'm not the only one with this issue but alas, I have found nothing so I'm hoping someone out there will give me some assistance.
My problem is the case statement in my Insert Statement. My overall goal is to insert records from one table to another. But I need to be able to assign a specific value to the incoming data and thought the case statement would be the best way of doing it. I must be doing something wrong but I can't seem to see it.

Here is my code:
Insert into myTblA
(TblA_ID,
mycasefield =
case
when mycasefield = 1 then 99861
when mycasefield = 2 then 99862
when mycasefield = 3 then 99863
when mycasefield = 4 then 99864
when mycasefield = 5 then 99865
when mycasefield = 6 then 99866
when mycasefield = 7 then 99867
when mycasefield = 8 then 99868
when mycasefield = 9 then 99855
when mycasefield = 10 then 99839
end,
alt_min,
alt_max,
longitude,
latitude
(
Select MTB.LocationID
MTB.model_ID
MTB.elevation, --alt min
null, --alt max
MTB.longitude, --longitude
MTB.latitude --latitude
from MyTblB MTB
);

The error I'm getting is:
Incorrect syntax near '='.

I have tried various versions of the case statement based on examples I have found but nothing works.
I would greatly appreciate any assistance with this one. I've been smacking my head against the wall for awhile trying to find a solution.

View 10 Replies View Related

How To Use Select Statement Inside Insert Statement

Oct 20, 2014

In the below code i want to use select statement for getting customer

address1,customeraddress2,customerphone,customercity,customerstate,customercountry,customerfirstname,customerlastname

from customer table.Rest of the things will be as it is in the following code.How do i do this?

INSERT INTO EMImportListing ("
sql += " CustId,Title,Description,JobCity,JobState,JobPostalCode,JobCountry,URL,Requirements, "
sql += " IsDraft,IsFeatured,IsApproved,"
sql += " Email,OrgName,customerAddress1,customerAddress2,customerCity,customerState,customerPostalCode,

[code]....

View 1 Replies View Related

How To Show Records Using Sql Case Statement Or If Else Statement

Feb 20, 2008

i want to display records as per if else condition in ms sql query,for this i have used tables ,queries as follows


as per data in MS Sql

my tables are as follows
1)material
fields are -- material_id,project_type,project_id,qty, --

2)AB_Corporate_project
fields are-- ab_crp_id,custname,contract_no,field_no

3)Other_project
fields are -- other_proj_id,other_custname,po

for ex :
vales in table's are
AB_Corporate_project
=====================
ab_crp_id custname contract_no field_no
1 abc 234 66
2 xyz 33 20

Other_project
============
other_proj_id other_custname po
1 xxcx 111
2 dsd 222

material
=========
material_id project_type project_id qty
1 AB Corporate 1 3
2 Other Project 2 7

i have taken AB Corporate for AB_Corporate_project ,Other Project for Other_project


sample query i write :--

select m.material_id ,m.project_type,m.project_id,m.qty,ab.ab_crp_id,
ab.custname ,op.other_proj_id,op.other_custname,op. po
case if m.project_type = 'AB Corporate' then
select * from AB_Corporate_project where ab.ab_crp_id = m.project_id
else if m.project_type = 'Other Project' then
select * from Other_project where op.other_proj_id=m.project_id
end
from material m,AB_Corporate_project ab,Other_project op


but this query not work,also it gives errors

i want sql query to show data as follows


material_id project_type project_id custname other_custname qty
1 AB Corporate 1 abc -- 3
2 Other Project 2 -- dsd 7

so plz help me how can i write sql query for to show the output
plz send a sql query

View 8 Replies View Related

Help With Delete Statement/converting This Select Statement.

Aug 10, 2006

I have 3 tables, with this relation:
tblChats.WebsiteID = tblWebsite.ID
tblWebsite.AccountID = tblAccount.ID

I need to delete rows within tblChats where tblChats.StartTime - GETDATE() < 180 and where they are apart of @AccountID. I have this select statement that works fine, but I am having trouble converting it to a delete statement:

SELECT * FROM tblChats c
LEFT JOIN tblWebsites sites ON sites.ID = c.WebsiteID
LEFT JOIN tblAccounts accounts on accounts.ID = sites.AccountID
WHERE accounts.ID = 16 AND GETDATE() - c.StartTime > 180

View 1 Replies View Related

.sql Control String

Apr 19, 2007

My development environment includes Visual Web Developer, SQL Server 2005 Express and SQL Server Management Studio Express.  I have a .sql control string that creates a database.  The control string is in my App_Data folder within my web site.  When I use SQL Server Managment Studio Express to run the .sql control string and create the tables etc. it does it in my SQLEXPRESS folder and not in the web.
How do I run the .sql file so it will create the database in my App_Data folder within the web site?
Thanks,
Kyleq

View 1 Replies View Related

Image Control And DB

Sep 15, 2007

I wanna know how to retrieve & insert an image from/to a Sql Server database.
using image control or any other control 
I’ve done that with windows form picture box.
As that was explained in MS tutorials  
Code….
-------------------------------------------Dim ms As New MemoryStreamPictureBox1.Image.Save(ms, PictureBox1.Image.RawFormat)Dim arrImage() As Byte = ms.GetBuffer
ms.Close()   Dim strSQL As String = _            "INSERT INTO Emp (EmpName,EmpSalary,Picture)" & _            "VALUES (@EmpName,@EmpSalary,@Picture)"  Dim cmd As New SqlCommand(strSQL, ConnEmp) With cmd     .Parameters.Add(New SqlParameter("@Picture", _      SqlDbType.Image)).Value = arrImage       .Parameters.Add(New SqlParameter("@EmpName", _       SqlDbType.NVarChar)).Value = txtEmpName.Text        .Parameters.Add(New SqlParameter("@EmpSalary", _        SqlDbType.Decimal)).Value = txtEmpSalary.Text   End With 
 cmd.ExecuteNonQuery()
------------------------------------------- 
But with a web form’s image control I DO NOT know how to do it    
I real appreciate your help 
Thank you
 

View 1 Replies View Related

Sqldatasource Control

Oct 23, 2007

please explain selectparameters and conflict detection property within sqldatasource control
mohsen

View 1 Replies View Related

Databinding To An ASP.NET Control

Mar 4, 2008

Hi,i have a question, i have a VS2005 and a SQL server 2000 enterprise in my office that i used for web developement,iam new to this, i made a data driven site using some automated controls available in the toolbox, but i need to made some manual process, like i need to make a LABEL show the SUM of specific number fields from my data base, they say i have to make a OLEDB connection using VB, but i don't know how,can you tell me how?Thanks  

View 13 Replies View Related

Sqldatasource Control

May 6, 2008

hi friends,
I created sqldatasource control. In select command i written the query like this  "select * form emp" and bounded in grid.How can I change the query for searching the details according the date wise when i click the search button.
 

View 14 Replies View Related

SqlDataSource Control

Jun 7, 2008

Hello experts
i have a SqlDataSource Control on my web form. Here is the source for the control
<asp:SqlDataSource ID="sqlSearchDataSource" runat="server" ConnectionString="<%$ ConnectionStrings:DbefomsConnectionString %>"
SelectCommand="SELECT [icon], [file_name], [path] FROM [tblfile] WHERE ([file_name] = @file_name)">
<SelectParameters>
<asp:ControlParameter ControlID="txtSearch" DefaultValue="0" Name="file_name" PropertyName="Text"
Type="String" />
</SelectParameters>
</asp:SqlDataSource>
This control displays icon, file_name, path in GridView Control
The problem is How can i store the above field values in an asp.net variable.
Thanks
Regards
Ali

View 1 Replies View Related

Concurrency Control

Apr 6, 2005

Hi! I'm building a web application with ASP.NET, and using MS SQL 2000 for my database server.
How should I do to guarantee the integrity of the data in spite of the concurrent access? Meaning... how can I make sure that more than 1 user can update 1 table at the same time, while no error will occur? Do I need to add some codes at my aspx file? Or do I need to do something to my database? Or do I not have to worry about it?
Thank you.

View 1 Replies View Related

SQLConnection Control

May 18, 2005

If i use the TimeTracker app from the starter kit suite and I enter my SQL connection in the web.config file it works fine,
 
If i build a simple app with just a sqladapter, sqlconnection and dataset control then enter in the page_load procedure
 
sqlDataAdater1.fill(dataset11)
datagrid1.databind()
It keeps giving my errors see below:  I created a connection with the sqlconnection control and used the same userid and password I used in the time tracker stater kit's web config file which works - I have no idea what is going on
 
*** is it better to create the sqlconnection control first then create the sqladapter or vise versa.
Server Error in '/WebApplication2' Application.


Login failed for user 'IssueTrackerUser'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Login failed for user 'IssueTrackerUser'.Source Error:



Line 55: Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Line 56: 'Put user code to initialize the page here
Line 57: SqlDataAdapter1.Fill(DataSet11)
Line 58: DataGrid1.DataBind()
Line 59: Source File: c:inetpubwwwrootWebApplication2WebForm1.aspx.vb    Line: 57 Stack Trace:



[SqlException: Login failed for user 'IssueTrackerUser'.]
System.Data.SqlClient.ConnectionPool.GetConnection(Boolean& isInTransaction)
System.Data.SqlClient.SqlConnectionPoolManager.GetPooledConnection(SqlConnectionString options, Boolean& isInTransaction)
System.Data.SqlClient.SqlConnection.Open()
System.Data.Common.DbDataAdapter.QuietOpen(IDbConnection connection, ConnectionState& originalState)
System.Data.Common.DbDataAdapter.FillFromCommand(Object data, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet)
WebApplication2.WebForm1.Page_Load(Object sender, EventArgs e) in c:inetpubwwwrootWebApplication2WebForm1.aspx.vb:57
System.Web.UI.Control.OnLoad(EventArgs e)
System.Web.UI.Control.LoadRecursive()
System.Web.UI.Page.ProcessRequestMain()



Version Information: Microsoft .NET Framework Version:1.1.4322.573; ASP.NET Version:1.1.4322.573
 

View 1 Replies View Related

Using The Sqldatasource Control

Dec 7, 2005

Do you have to use the sqldatasource in conjuction with another control like gridview or dropdown list?
I'd like to check to see if a record exists in one table before inserting data into another.
 
thanks
 

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved