I've created multiple select statement to pull in varies fields from a table and one of those fields is Fiscal_Year, however, after the select statement I'm adding a Where clause:
i am runing stored procedure which runs for around 20 min. as it is filtering data from lacks of record. after completion it shows above message i.e."query completed with errors" with 466814 records affected why this happining as it does not display any errror in message window . Does it is because of size of data . plz guide me how to debug it.
Hi, I've created a SQL union query that grabs the top three values of a test and puts the results together on one line item by a recordnumber. The only problem is, one value is generating the error: " Syntax error converting the varchar value '=' to a column of data type int." This field is an operator field, so it will only display operator values ( <, >, = ). Everything seems to work BUT the union join on that column, which is a varchar data type. I need this union to work, and Im frustrated that I can't seem to figure out why I can't get the logic to work. Can someone take a look at this and help me with it? The union query looks like this:
exec('select RecordNumber,Sum(rank1) as HbA1CRank1,max(Operator1) as HbA1COperator1,sum(contentValue1) as HbA1CContentvalue1,max(dos1) as HbA1CDOS1,Sum(rank2) as HbA1CRank2,max(Operator2) as HbA1COperator2,sum(contentValue2) as HbA1CContentvalue2,max(dos2) as HbA1CDOS2,Sum(rank3) as HbA1CRank3,max(Operator3) as HbA1COperator3,sum(contentValue3) as HbA1CContentvalue3,max(dos3) as HbA1CDOS3 from (SELECT DISTINCT TOP 100 PERCENT recordnumber, Rank AS rank1, cast(Operator as varchar) as Operator1, contentValue AS contentvalue1, DOS AS DOS1, 0 AS rank2, 0 as Operator2, 0 AS contentvalue2, 0 AS DOS2, 0 AS rank3, 0 as Operator3, 0 AS contentvalue3, 0 AS DOS3FROM (SELECT (SELECT COUNT(*) FROM tblDiabetic_HgbA1C_Total vw1 WHERE vw1.rECORDnUMBER = vw2.rECORDnUMBER AND vw1.ItemCode = vw2.ItemCode AND vw1.Operator = vw2.Operator AND vw1.DOS > vw2.DOS) AS Rank, * FROM tblDiabetic_HgbA1C_Total vw2) vw3WHERE (Rank = 0)ORDER BY RecordNumber UNION SELECT DISTINCT TOP 100 PERCENT recordnumber, 0 AS rank1, 0 as Operator1, 0 AS contentvalue1, 0 AS DOS1, Rank AS rank2, cast(Operator as varchar) as Operator2, contentValue AS contentvalue2, DOS AS DOS2, 0 AS rank3, 0 as operator3, 0 AS contentvalue3, 0 AS DOS3FROM (SELECT (SELECT COUNT(*) FROM tblDiabetic_HgbA1C_Total vw1 WHERE vw1.rECORDnUMBER = vw2.rECORDnUMBER AND vw1.ItemCode = vw2.ItemCode AND vw1.Operator = vw2.Operator AND vw1.DOS > vw2.DOS) AS Rank, * FROM tblDiabetic_HgbA1C_Total vw2) vw3WHERE (Rank = 1)ORDER BY RecordNumber UNION SELECT DISTINCT TOP 100 PERCENT recordnumber, 0 AS rank1, 0 as Operator1, 0 AS contentvalue1, 0 AS DOS1, 0 AS rank2, 0 as operator2, 0 AS contentvalue2, 0 AS DOS2, rank AS rank3, cast(Operator as varchar) as operator3, contentvalue AS contentvalue3, DOS AS DOS3FROM (SELECT (SELECT COUNT(*) FROM tblDiabetic_HgbA1C_Total vw1 WHERE vw1.rECORDnUMBER = vw2.rECORDnUMBER AND vw1.ItemCode = vw2.ItemCode AND vw1.Operator = vw2.Operator AND vw1.DOS > vw2.DOS) AS Rank, * FROM tblDiabetic_HgbA1C_Total vw2) vw3WHERE (Rank = 2)ORDER BY RecordNumber )tblHgA1C group by RecordNumber ')GO Can anyone help? It looks right to me, I just can't figure out why the error keeps coming up = Thank you!
Thought I would post here in case anybody can give some information.
Here is the background information:
I have 2 tables (stores and sales) from the Pubs database in Sql Server 2000 copied down to a SQL Server CE database. There is no foreign key/primary key relationship between the 2 tables in the CE database.
Here are the update queries that cause the error:
UPDATE st SET st.zip = 66668 FROM stores st INNER JOIN sales sa ON st.stor_id = sa.stor_id AND st.stor_id = 6380
Update stores SET stores.zip = 55555 FROM sales, stores WHERE stores.stor_id = 6380 AND stores.stor_id = sales.stor_id
Here is the error message that is generated when I run the query (Param 0 and Param 1 change according to what column and line the FROM clause is in):
Error: 0x80040e14 DB_E_ERRORSINCOMMAND Native Error: (25501) Description: There was an error parsing the query. [Token line number,Token line offset,,Token in error,,] Interface defining error: IID_ICommand Param. 0: 2 Param. 1: 1 Param. 2: 0 Param. 3: FROM Param. 4: Param. 5:
I ran the 2 queries in SQL Query Analyzer in SQL Server 2000 and they worked just fine. I also created 2 new tables (stores1 and sales1) in SQL Server 2000 using the Select Into clause. The new tables were created from the sales table and stores table in the Pubs database. The new tables had no foreign key/primary key relationship.
I ran the queries again in Query Analyzer against the new tables and the queries produced no errors.
I am trying to make changes to the above query. This query will select 2 records per Company with top down priority on JobLevel. For example: This query will select 2 records from "123 Inc", where they have 2 Managers and 3 Staff contacts. The return results selects (2) managers and no staff records and FirstName and LastName are not duplicate. Then for "A Small Co.", they have 1 VP, 1 Director, 1 Manager and 3 Staff contacts. the return results chooses 1 VP and 1 Director and no managers or staff level people. And so on and so forth for the remainder of the companies.
What I was trying to accomplish is having this same query point to the database tables instead creating a table each and every time. I have this data residing in our database. I tried to make the change so it would point to the database tables but it kept giving me errors. This is way more complex than I thought.
My failed attempt:
Select * From CampServ.dbo.SampleFakeCustomerData //This is where I am getting stuck WITH Priorities(Priority, JobLevel) AS( SELECT 1, 'VP' UNION ALL SELECT 2, 'Director' UNION ALL
I have a big table and want to make a plausibility check of it´s data.
Problem is, that my query stops, if there is an unexpected datatype in one of the rows. But that is it, what i want to filter out of my table with that query and save the result as new correct table.
How can i write a parameter to my query SQL Code, that if a error occurs, the querry resumes and the error line will not displayed in my final querry overview?
In my books and on the net, i don´t found something to this theme ;-(.
I execute a script that someone else wrote and I get Query Completed with Errors but there is not an error message.If I highlight and execute parts of the script, it completes successfully.
My database is logging frequent errors and I am unable to determine the cause. These errors appear to be related to the Service Broker. Below is the database log file after a database restart and attempted access to the database through a web application. The first error (bottom of the logfile) is error 28054. I have searched on this error code and have found nothing helpful. Any assistance or direction would be greatly appreciated.
Database Log:
04/13/2006 12:26:05,spid22s,Unknown,An error occurred in the service broker message dispatcher<c/> Error: 15517 State: 1. 04/13/2006 12:26:05,spid22s,Unknown,Error: 9644<c/> Severity: 16<c/> State: 14. 04/13/2006 12:26:04,spid57s,Unknown,The activated proc [dbo].[SqlQueryNotificationStoredProcedure-aa148e0f-2980-4a23-b9cf-b44dbfddf783] running on queue CDR.dbo.SqlQueryNotificationService-aa148e0f-2980-4a23-b9cf-b44dbfddf783 output the following: 'Cannot execute as the database principal because the principal "dbo" does not exist<c/> this type of principal cannot be impersonated<c/> or you do not have permission.' 04/13/2006 12:26:01,spid22s,Unknown,An error occurred in the service broker message dispatcher<c/> Error: 15517 State: 1. 04/13/2006 12:26:01,spid22s,Unknown,Error: 9644<c/> Severity: 16<c/> State: 14. 04/13/2006 12:26:01,spid56s,Unknown,The activated proc [dbo].[SqlQueryNotificationStoredProcedure-aa148e0f-2980-4a23-b9cf-b44dbfddf783] running on queue CDR.dbo.SqlQueryNotificationService-aa148e0f-2980-4a23-b9cf-b44dbfddf783 output the following: 'Cannot execute as the database principal because the principal "dbo" does not exist<c/> this type of principal cannot be impersonated<c/> or you do not have permission.' 04/13/2006 12:26:01,spid56s,Unknown,The activated proc [dbo].[SqlQueryNotificationStoredProcedure-aa148e0f-2980-4a23-b9cf-b44dbfddf783] running on queue CDR.dbo.SqlQueryNotificationService-aa148e0f-2980-4a23-b9cf-b44dbfddf783 output the following: 'Cannot execute as the database principal because the principal "dbo" does not exist<c/> this type of principal cannot be impersonated<c/> or you do not have permission.' 04/13/2006 12:26:01,spid56s,Unknown,The activated proc [dbo].[SqlQueryNotificationStoredProcedure-aa148e0f-2980-4a23-b9cf-b44dbfddf783] running on queue CDR.dbo.SqlQueryNotificationService-aa148e0f-2980-4a23-b9cf-b44dbfddf783 output the following: 'Cannot execute as the database principal because the principal "dbo" does not exist<c/> this type of principal cannot be impersonated<c/> or you do not have permission.' 04/13/2006 12:26:01,spid52,Unknown,Service Broker needs to access the master key in the database 'CDR'. Error code:25. The master key has to exist and the service master key encryption is required. 04/13/2006 12:26:01,spid52,Unknown,Error: 28054<c/> Severity: 11<c/> State: 1.
I recently updated the datatype of a sproc parameter from bit to tinyint. When I executed the sproc with the updated parameters the sproc appeared to succeed and returned "1 row(s) affected" in the console. However, the update triggered by the sproc did not actually work.
The table column was a bit which only allows 0 or 1 and the sproc was passing a value of 2 so the table was rejecting this value. However, the sproc did not return an error and appeared to return success. So is there a way to configure the database or sproc to return an error message when this type of error occurs?
I have a parent package that calls child packages inside a For Each container. When I debug/run the parent package (from VS), I get the following error message: Warning: The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
It appears to be failing while executing the child package. However, the logs (via the "progress" tab) for both the parent package and the child package show no errors other than the one listed above (and that shows in the parent package log). The child package appears to validate completely without error (all components are green and no error messages in the log). I turned on SSIS logging to a text file and see nothing in there either.
If I bump up the MaximumErrorCount in the parent package and in the Execute Package Task that calls the child package to 4 (to go one above the error count indicated in the message above), the whole thing executes sucessfully. I don't want to leave the Max Error Count set like this. Is there something I am missing? For example are there errors that do not get logged by default? I get some warnings, do a certain number of warnings equal an error?
Starwin writes "when i execute DBCC CHECKDB, DBCC CHECKCATALOG I reveived the following error. how to solve it?
Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -2093955965, index ID 711, page ID (3:2530). The PageId in the page header = (34443:343146507). . . . . . . . .
CHECKDB found 0 allocation errors and 1 consistency errors in table '(Object ID -1635188736)' (object ID -1635188736). CHECKDB found 0 allocation errors and 1 consistency errors in table '(Object ID -1600811521)' (object ID -1600811521).
. . . . . . . .
Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -8748568, index ID 50307, page ID (3:2497). The PageId in the page header = (26707:762626875). Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -7615284, index ID 35836, page ID (3:2534). The PageId in the page heade"
1 SELECT distinct A.EAIndex, 2 A.ChainCode AS ChainCode, 3 A.JobDate, 4 C.BillerName, 5 B.BusinessCode, 6 D.ChainName, 7 A.BillBegDate, 8 A.BillEndDate, 9 A.PostDate, 10 A.BillCount, 11 A.ChAmount, 12 A.PostAmount, 13 A.ProChargeFee, 14 A.BalanceStatus AS BalanceStatus, 15 B.BillerInfoCode AS BillerInfoCode , 16 CONVERT(varchar(10), A.BalanceDate, 112)BalanceDate, 17 A.AdjustDate, 18 C.BillerCode , 19 (a.ChAmount- a.ProChargeFee) AS Fee, 20 E.EABillerCode, E.RelAdjustDate 21 FROM ZT_EAccount A 22 Inner Join ZT_BillerInfo B On Right('00000'+Rtrim(Ltrim(A.BillerCode)),5) = Right('00000'+Rtrim(Ltrim(B.BillerInfoCode)),5) 23 Inner Join ZT_Biller C ON B.ParentCode = C.BillerCode 24 Inner Join ZT_Chain D On A.ChainCode = D.ChainCode 25 Inner Join ZT_EAccountAdjust E ON a.EAIndex=E.EAIndex and a.BillerCode=E.BusCode 26 Where A.JobDate BETWEEN '20071001' AND '20071005' AND C.CompanyCode='533' In line 13 I want to add a Query to make sure if ZT_BillerInfo.Rmflag = 1, if it's =1 then ProChargeFee =0if ZT_BillerInfo.RmFlag =0 , then ProChargeFee = a.ProChargeFee.I add this line �Case B.RmFlag = '1' then 0 else A.ProChargeFee 】instead of Line 13 (A.ProChargeFee)but I execute Sql I got error message on the line I have jsut modified..can you please help me to know why and how to correct it? thank you very much
I have SQL Server 2005 Express Edition with Advanced Services running on a small web server. It all runs fine, but every now and then the log files grow and grow and eventually use up all the disk space of 30GB. As a quick fix, restarting SQL a couple of times clears out the logs and everything is up and running again. Any ideas on how to stop this happening?
I just peeked at my DNN setup and I found that I have a transaction log about 98 gigs large, compared to a DNN database that is only about 250 megs. Crazy, huh?
Do you happen to know what I need that transaction log for? Can I just delete it or will it break my SQL db? Is there a way that I can keep only maybe a week of transactions in it so it doesn't grow so dang large?
One of my production databases is currently 51 mb. The transaction log is well over 5 gig. I have tried truncating and then shrinking the log through the use of SQL utilities. This does not work! How can I quickly resolve this problem without tampering with the production environment?
I am not a DBA and I run a personal web site that has gotten pretty large. I have never done anything to maintain my sql server, and now my transaction log is 10 Gigs and my data is only like 300 Megs. I am starting to get a memory leak with the sql service. What should I do? Is it bad to have a huge transaction log. I am not familiar with any of this stuff, so someone please point me in the right direction.
Hi all, I found my database log file is 26GB and the database file is just about 280MB. We are doing full backup everyday. However, my sql server seems running very slow now and please advise:
1. How can I decrease/truncate my log file? 2. Would the huge size of the log file be the reasons slowing up my sql server? 3. Would anyone give me direction knowing more on the transaction log? Thank you and appreciated!
Hi guys, its my first post! Its also like my first time really diving into sql. We are using sharepoint on site here along with sql server 2005, one of our log files is 255 GBs and needs to be made smaller very fast!! We are almost out of disk space and the log is growing fast.
I am very new to sql and dont even know where to go to enter commands, so youll have to bear with me here. I've read about truncating and shrinking and some other things, I am just worried and dont want to mess anything up. I know this is probably a simple task, but like I said, with the truncate command I was reading about, I dont even know where to go to type it in!!! If someone could please help it would be much appreciated. Thanks so much.
I have a huge dataset in MS SQL Server, over 11 million records of machine data taken every four seconds. I really don't need samples of this data at this interval. I'd like to run a query to retrieve my data for every 30 minute interval. I know enough SQL and DTS to SELECT was fields I want, and how to direct it to a CSV file, but I'm not sure how to manipulate the TimeStamp field in the query to only pull data every 450 records.
I have a problem and I am sure someone here can help. Lat night my DB was working fine, as it has been . This morning I get to the office and now everything has gone to hell in a handbag .
I can no longer connect to my sql2005 DB I get this error when trying to place an order on our order page.
"There was a problem with the website:An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.) The error has been logged."
I also notice the sql agent will not start. Any the former owner of the Co. had a eval version of sql management studio the must have just expired(could this be causing it?)
I have a .bak file of 72gb. But my database size is only 32gb, I got this value from sp_spaceused? Anyone know why the .bak file is so big?. Is it possible to reduce the size? How could i reduce it?
Hello, I have a very big T-SQL script (~24mb) and I need the SQL Server on my hosted site to execute it.
Right now, I have a web page that uses Sql.Connection.ExecuteNonQuery () to do it, but the .NET process runs out of memory when I load the file into a C# string.
How would I go about executing this T-SQL script on the server? Is there such a command: EXECUTE SCRIPT "myscript.sql" FROM DISC ?
Hi this is regarding SQL Sever 2000. ( it was upgraded form sql7). its log file is increasing in very high manner. say 40 gb, 50 gb and now 57 gb. Mdf file is around 15 mb. we created back up and tried to restore to another system. its asking 57 gb free space. how to proceeed with file recovery. we have backups but it askes more space for log file. how to retrieve the data. rgds Pramod
Good evening: We're porting an old app written in ASP.NET 1.1433 and SQL 2000 to ASP.NET 2.0 and SQL 2005. In the old app we have a few data grids that are populated from a dataset pulled from the database. We use a SQL query that we build based on more than 10 different user inputs, the result of which is an enormously complicated SQL string. We'd like to move this processing into a SPROC in the 2005 database. Rather than writing stored procedures to create the SQL SELECT statement, is it possible to pass an entire select state ment to a SPROC and have it executed within? We're trying to capitalize on paging in 2005 using ...ROW_NUMBER() OVER (ORDER BY PM ASC)... and building the string using IF ELSE statements is mind numbling complex and tedious. And suggestions woudl be great. Thanks, Brad