INDEXING A VIEW In MSSQL2K5x64.de Standard W.SP1 ... ERROR 1939

Aug 2, 2006

I'm experiencing a problem while trying to index a view ... I'm using a single field and everything else are default entry's. I'm getting the Error Message 1939 .

The code is a follows:

USE [CS_WGO]

GO

SET ARITHABORT ON

GO

SET CONCAT_NULL_YIELDS_NULL ON

GO

SET QUOTED_IDENTIFIER ON

GO

SET ANSI_NULLS ON

GO

SET ANSI_PADDING ON

GO

SET ANSI_WARNINGS ON

GO

SET NUMERIC_ROUNDABORT OFF

GO

CREATE UNIQUE CLUSTERED INDEX [IDX_ALG_ORG_BEZ_V_1] ON [dbo].[ALG_ORG_BEZ_V]

(

[NDL] ASC

)WITH (STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, IGNORE_DUP_KEY = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = OFF) ON [PRIMARY]

GO



And the Error is:

Msg 1939, Level 16, State 1, Line 1

Index kann fĂĽr die 'ALG_ORG_BEZ_V'-Sicht nicht erstellt werden, da die Sicht nicht schemagebunden ist.



For those of you who do not read German ... it means something like ..." The Index kann not be created because the view is not bound to a schema.

I don't understand what that means for me ... can someone explain that to me a little bit more in depth ... ?

Thanx ... wvg







View 7 Replies


ADVERTISEMENT

Full Text Search Indexing HTML - Does The Filter Expect Certain Tags To Be Present As Standard?

Jul 10, 2007

Hi, I was wondering if any SQL Server gurus out there could help me...I
have a table which contains text resources for my application. The text
resources are multi-lingual so I've read that if I add a html language
indicator meta tag e.g.<META NAME="MS.LOCALE" CONTENT="ES">and
store the text in a varbinary column with a supporting Document Type
column containing ".html" of varchar(5) then the full text index
service should be intelligent about the language word breakers it
applies when indexing the text. (I hope this is correct technique for
best multi-lingual support in a single table?)However, when I come to query this data the results always return 0 rows (no errors are encountered). e.g.DECLARE @SearchWord nvarchar(256)SET @SearchWord = 'search' -- Yes, this word is definitely present in my resources.SELECT * FROM Resource WHERE CONTAINS(Document, @SearchWord)I'm a little puzzled as Full Text search is working fine on another table that employs an nvarchar column (just plain text, no html).Does the filter used for full text indexing of html expect certain tags to be present as standard? E.g. <html> and <body> tags? At present the data I have stored might look like this (no html or body wrapping tags):Example record 1 data: <META NAME="MS.LOCALE" CONTENT="EN">Search for keywords:Example record 2 data: <META NAME="MS.LOCALE" CONTENT="EN">Sorry no results were found for your search.etc.Any pointers / suggestions would be greatly appreciated. Cheers,Gavin.UPDATE: I have tried wrapping the text in more usual html tags and re-built the full text index but I still never get any rows returned for my query results. Example of content wrapping tried - <HTML><HEAD><META NAME="MS.LOCALE" CONTENT="EN"></HEAD><BODY>Test text.</BODY></HTML>I've also tried stripping all html tags from the content and set the Document Type column = .txt but I still get no rows returned?!? 

View 1 Replies View Related

Full Text Search Indexing HTML - Does The Filter Expect Certain Tags To Be Present As Standard?

Jul 11, 2007

Hi, I was wondering if any SQL Server gurus out there could help me...

I have a table which contains text resources for my application. The text resources are multi-lingual so I've read that if I add a html language indicator meta tag e.g.
<META NAME="MS.LOCALE" CONTENT="ES">
and store the text in a varbinary column with a supporting Document Type column containing ".html" of varchar(5) then the full text index service should be intelligent about the language word breakers it applies when indexing the text. (I hope this is correct technique for best multi-lingual support in a single table?)

However, when I come to query this data the results always return 0 rows (no errors are encountered). e.g.
DECLARE @SearchWord nvarchar(256)
SET @SearchWord = 'search' -- Yes, this word is definitely present in my resources.
SELECT * FROM Resource WHERE CONTAINS(Document, @SearchWord)

I'm a little puzzled as Full Text search is working fine on another table that employs an nvarchar column (just plain text, no html).

Does the filter used for full text indexing of html expect certain tags to be present as standard? E.g. <html> and <body> tags? At present the data I have stored might look like this (no html or body wrapping tags):

Example record 1 data: <META NAME="MS.LOCALE" CONTENT="EN">Search for keywords:

Example record 2 data: <META NAME="MS.LOCALE" CONTENT="EN">Sorry no results were found for your search.

etc.

Any pointers / suggestions would be greatly appreciated. Cheers,
Gavin.

UPDATE: I have tried wrapping the text in more usual html tags and re-built the full text index but I still never get any rows returned for my query results. Example of content wrapping tried - <HTML><HEAD><META NAME="MS.LOCALE" CONTENT="EN"></HEAD><BODY>Test text.</BODY></HTML>

I've also tried stripping all html tags from the content and set the Document Type column = .txt but I still get no rows returned?!?

View 1 Replies View Related

Indexing A View

Dec 14, 2005

Hi All,I'm hoping someone can help me. I think I'm missing something verybasic. I'm trying to put a clustered index on a view that I havecreated. I keep getting the error:Server: Msg 8668, Level 16, State 1, Line 1An index cannot be created on the view 'cew_avwage_uscnty' because theselect list of the view contains a non-aggregate expression.Here is the create view statement:CREATE view dbo.cew_avwage_uscntywith schemabindingasselect statefips, countyfips, naics_code, sum(disc * 0) as disc,data_year, sum(qtr_payroll)/((sum(emp1+emp2+emp3))/12) as avwagefrom dbo.qcew_own_n where year= '2004'and (ownership = '0'and (naics_code like '__' or naics_code like '__-__')or (ownership = '5' and naics_code = '10'))and countyfips <> '999'and naics_code <> '99'and ((disc = '0') or (disc <> '0' and (emp1 <> 0 or emp2 <> 0 or emp3 <>0)))group by statefips, countyfips, naics_code, data_yearHere is the create index statement I am using:create unique clustered index main_cdxon dbo.cew_avwage_uscnty (statefips, countyfips, naics_code, year)Each field that I have listed in the select statement MUST appear in theview. The disc field needs to be set = 0 and the data_year field needsto be set = 2004. Initially I had select statement for disc anddata_year set as, disc = '0', year = '2004' .. but thought this wasgiving me my problem. I changed it and am still getting the same error?Is my problem because of the fields that I am grouping by? Any advicewould be very much appreciated. I'm trying to avoid creating an extracttable, as these data are updated regularly - so I would like to onlyupdate the base table and have the view refresh itself.Thanks again!Bethany*** Sent via Developersdex http://www.developersdex.com ***

View 6 Replies View Related

SQL 2012 :: Clustered Indexing On View

Jun 15, 2015

I've created a table which will hold staffing data (name, grade, etc.) and any shifts that are going to be entered. I've got some test data in the table.

The base table looks like this:-

CREATE TABLE [dbo].[tbl_ForecastShifts_New](
[ID] [int] IDENTITY(1,1) NOT NULL,
[Ward] [nvarchar](255) NULL,
[StaffBand] [real] NULL,
[StaffMemberName] [nvarchar](255) NULL,

[Code] ....

I've attached a spreadsheet with the test data from the table and the required layout on the second tab.

I've created a view which displays the data as I want it and I need to attach this to an MS Access front-end for the users to input/edit the data in the table with the use of a Access form.

The view I've created looks like this:-

CREATE view [dbo].[vw_Forecast_Staffing] with schemabinding
as
select
s.Ward
,s.StaffBand
,s.StaffName
,d1.Date1

[Code] ....

It displays all the staff members and any shifts they've been given for a 7-day period with day 1 begin supplied by the user.

The user will also supply the ward they are interested in viewing.

When I attached the view to Access it becomes read-only as it doesn't have any indexes on it.

I can't create a clustered index on the view as there are derived tables.

View 3 Replies View Related

Indexing View Definition Table Columns

Sep 29, 2007

Hi experts,


Im very very new to sql server world..wanted to know what kind of indexes to be created on the below mentioned table columns for making this view run fastly.As of now there are no indexes created on these view definition columns


CREATE View hrinu.Parity as
select
T1.Matcle as CorpID,
T2.Nmpres as Name,
T4.DATDEB as LeaveFrom,
T4.TEMDEB as PM,
T4.DATFIN as LeaveTo,
T4.TEMFIN as AM,
T10.LIBLON as LeaveType,
T8.LIBLON as Location,
T12.LIBLON as ParentOrg

from HRINU.zy00 T1,
HRINU.zy3y T2,
HRINU.zy39 T3,
HRINU.zyag T4,
HRINU.zy38 T5,
HRINU.zy1s T6,
HRINU.zd00 T7,
HRINU.zd01 T8,
HRINU.zd00 T9,
HRINU.zd01 T10,
HRINU.zd00 T11,
HRINU.zd01 T12
where T4.Nudoss = T3.nudoss
and T4.Nudoss = T1.Nudoss
and T1.Nudoss = T2.nudoss
and T3.nudoss = T5.nudoss
and T6.nudoss = T1.nudoss
AND T7.NUDOSS = T8.NUDOSS
AND T9.NUDOSS = T10.NUDOSS
AND T11.NUDOSS = T12.NUDOSS
AND T3.IDWKLO = T7.CDCODE
AND T4.MOTIFA = T9.CDCODE
AND T5.IDESTA = T11.CDCODE
and T6.stempl = 'A'
and t7.cdstco = 'z04'
AND T8.CDLANG = 'U'
and t9.cdstco = 'DSJ'
AND T10.CDLANG= 'U'
and t11.cdstco= 'DRE'
AND T12.CDLANG= 'U'
and T4.DATDEB <= T3.DTEN00 and T4.DATFIN >= T3.DTEF00
and T3.DTEN00 <= T5.DTEN00 and T3.DTEN00 >= T5.DTEF00
and T6.dtef1s <= getdate() and T6.datxxx > getdate()


Also Please suggest me some links where i can get info about the indexes that has to be created on these types of queries where joins are involved on these many tables.
Also throw some light on how to analyse the execution plan for further enhancements.



Thanks in advance


Regrds
Arvind L

View 3 Replies View Related

FLAT File Indexing Vs RDBMS Indexing

Sep 22, 2006

Hi

I want to know is a flat file faster than a RDBMS for indexing for example a search engine indexing would a flat file be better in terms of performance, scalability etc than a RDBMS?

View 14 Replies View Related

Full-Text Indexing Error

Apr 4, 2008

Trying to make a full-text table of a few tables in SQL server 2000 using the SQL Server Managment Studio. I am getting the following error when I then try to view the columns using the table. The column it is having a problem with is just a varchar text column. I have tried a few different tables and each time it has a problem with one of the columns. It does not give me an error when creating the full-text table. Anyone have any information on this?
 I check on a full text table I made a while ago and it is giving me the same error but searches on it seem to be working, but cannot tell if it is using the one column it is having an issue with.
 
Property TypeColumnName is not available for FullTextIndexColumn '[MyColumnName]'.    This property may not exist for this object, or may not be retrievable due    to insufficient access rights.  (Microsoft.SqlServer.Smo)

View 2 Replies View Related

Error When Creating Full Text Indexing

Apr 5, 2000

Hi,

I am just starting to study for the sql 7.0 admin test. Using the sybex book and bol I have run accross an error that I can not seem to find any support for. I am trying to do a full text index and I receive the following area: "An unknown full text failure (80004005)occured in function EnumCatalog on full text catalog".

I have looked on the website high and low and cant find anything on this error. Can someone give me some possible input to what the problem is?

thanks,

Jerry

jarnone@bellsouth.net

View 2 Replies View Related

Full Text Search Know Which Row Has Error In Indexing

May 15, 2007



Hello everybody,

I have installed SQLServer 2005 for take advantage of full text seach features.

When I start full population, there are some rows that cause error and not are indexed.

I see the log in C:ProgrammiMicrosoft SQL ServerMSSQL.1MSSQLLOGSQLFT0000700005.LOG. In this file there are seven rows that have error and for everyone a line that say:

"Error '0x8004fd01: The IFilter::Init() function call failed.' ... full-text key value 0x495532303045594154504B55. Attempt will be made to reindex it. The component 'pdffilt.dll' reported error while indexing. Component path 'C:ProgrammiFoxit SoftwareFoxit PDF IFilterpdffilt.dll'."

With different full-text key value for every line.



My question is:

1) Start from a full-text key (ie. 0x495532303045594154504B55), how I arrive to the record in the source table for understand which is the problem?Otherwise how can I examine the problem if I don't know the row that cause the error?

2) What is the error 0x8004fd01?

3) Could be that the PDF filter of Foxit is better than Adobe? With Adobe filter (version 6) my full pupulation is endless!



Thanks!

View 1 Replies View Related

Online Re-indexing Vs Offline Re-indexing

Sep 10, 2007

Hi,

The other day we tried online re-indexing feature of SQL 2005 and it€™s performing faster than offline re-indexing. Could you please validate if it€™s supposed to do be this way? I always thought offline should be faster than online.


Thanks,
Ritesh

View 5 Replies View Related

SQL Search :: Full Text Indexing Returning Error

Oct 28, 2015

We have an iFilter to extract text on emails and their attached files. I have encountered 5 emails that receive the following error code, but I cannot find anything on the error code: Error '0x80fc7586' occurred during full-text index population for table or indexed view '[RIA_Unindexed].[dbo].[Emails]' (table or indexed view ID '485576768', database ID '31'), full-text key value 'E11264A2-A17D-E511-80E0-005056B240B1'. Attempt will be made to reindex it.After a number of retry attempts they will fail to index.what does error code  '0x80fc7586' refer to, I have not found it.

Since the first two bytes of the error code are the severity and facility reporting the error, I stripped off that information and looked for error 0x7586 or 30086. That error reported "Too Many products".Theses emails being indexed contain attachments with large attachments that then the attachment chunks are being called for from the fdhost may result in too many chunk segments, or more likely there are some repeating words in the extracts like 4 million occurrences so right now I am testing that condition. To see if the word breaker is throwing the error.

View 10 Replies View Related

Error With SQL Standard Date

Jan 26, 2007

Hi Playing around on server at new giggerooo. SELECT CAST('2007-01-28'ASDATETIME)throws:Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.This:SELECT CAST('20070128'ASDATETIME)Works fine. ASFAIK (or recall) former is SQL Standard, latter is ISO. Should I just start using the ever-so-slightly-less-readable YYYYMMDD format or is there a specific setting I should be looking at and perhaps change? SS 2KLanguage: English (United States)Collation: Latin1_General_CI_AI Ta:)

View 10 Replies View Related

SQL SERVER STANDARD Install Error PLEASE HELP!!!!!!

Sep 27, 2004

While trying to install SQL SERVER Standard I receive the following error message " SQL failed to install! (Completed != 1) " The only fix I found online was to remove one of the registry keys which I did. The error still appears. ANY help would be greatly appreciated

View 5 Replies View Related

SQL 2005 Standard Error On Windows XP Pro SP2

Oct 26, 2005

When I run the SQLSTD.EXE for the September CTP of SQL 2005 Std I get the following error message:

View 8 Replies View Related

Setup Error SQL Server 2005 Standard

Mar 10, 2006

Trying to install SQL Server 2005 Standard on a pc with Windows xp pro spII with Visual Studio 2005 pro installed.I receive an error after 2/3 of the setup time.This is the error: Linkid: 20476Product name Microsoft SQL ServerProduct version 9.00.1399.06Message source Setup.rllMessage id 50000EvtType packageengineinstallpackageaction

View 10 Replies View Related

SQL Server 2005 Standard Login Error

Jan 13, 2007

When I was using

winXP Pro I installed a copy of SQL Server Standard and had it working correctly with Windows authenication logon. I subsequently upgraded to Windows Vista business edition. I also upgraded to SQL Server sp2. Now I get the dreaded "SQL Server, Error: 18456" when trying to connect to the instance of SQL server on my machine. On solution seems to be to login to the original instance and use a stored procedure to update subsequent instances of SQL server.

My subsequent instance is my original instance with the new OS. I do not have a clue how to edit registry entries or any othe methods of overcoming this problem. Anyone have a solution that I could use? Help would be very much appreciated.

View 1 Replies View Related

Compare Standard Evalulation To Standard License Version

May 30, 2007

Hi All,



Good Evening.



I need a comparision between Evaluation copy and Standard license version of SQL Server 2005 /SSIS.



I'm assigned a task to evaluate SSIS and migrate a project to SSIS.



I have downloaded SSIS evaluation version and started working on that.



Now i'm being posed questions for the complete functionality of the tool...



- Whether it has a Bulk load trasformation ?

- Whether the evaluation version contain all the features of a standard license version ?



I need to submit a consolidated report for SSIS in comparision to the current ETL tool features.



Can you please let me is there any considerable features not given with a evaluation copy ?



Thanks in advance,

Suresh N

View 4 Replies View Related

Error Installing Express Edition With VS2005 Standard

Nov 15, 2005

I've installed VS2005 Standard Edition onto a machine running XP Home

View 11 Replies View Related

WMI Config Error Installing SQL2K5 Standard Edition

Jun 1, 2007

I am dealing with the same issue posted in this other thread that seems to have died with no solution found:

http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=1131407&SiteID=17

Almost as soon as I start to install SQL 2005 on my Windows XP Pro Version 2002 Service Pack 2 machine at work it pops up a dialog with one of the following 2 error messages (they alternate randomly):

The SQL Server System Configuration Checker cannot be executed due to WMI configuration on the machine PCF092191 Error:2147500034 (0x80004002).

The SQL Server System Configuration Checker cannot be executed due to WMI configuration on the machine PCF092191 Error:2147749907 (0x80041013).

After clicking OK the installation just closes.

I also discovered when I load wmimgmt.msc and click Properties on the WMI Control, I get the following errors on the General tab, AND it does not allow me to click on any other tabs:

Failed to initialize all required WMI classes.
Win32_Processor: <Null>: No such interface supported
Win32_WMISetting: Successful
Security information: Successful
Win32_OperatingSystem: <Null>: No such interface supported

I have been searching online for days and tried doing virtually everything I found that I could understand and nothing works. Reinstalling WMI off the XP CD doesn't work, rebuilding the WMI repository doesn't work, registering all the WMI DLLs and MOF files doesn't work, running all the various scripts to fix WMI that are posted all over online doesn't work.

I downloaded the Microsoft WMI Diagnostics tool and ran it. It printed a ton of errors in a 466-line report that I can't make head or tail of. 6 here, 33 there, 27 over there...almost too many to count. The suggestions it gives to fix them range from vague and incomplete to incomprehensible. I'll paste those error results into a followup post.

I installed the WMI Tools package and can't figure out what to do with any of the tools at all. The only thing I noticed is that when examining a section under Win32_Processor, most entries for various properties are marked <empty>, while I have seen people discussing what I think are those same properties online and talking about seeing stuff typed into theirs (such as the HostingModel having LocalServiceHost typed in and ImpersonationLevel having 1 typed in). But there are so many properties and I'm not sure what should be typed into all of them or if I'm even looking in the right place.

I've seen some suggestions in WMI documentation that not all WMI errors may be related to WMI itself at all, which I think might be the case here, but I don't know. Some material said DCOM may be the problem, but I didn't have much luck figuring out how to fix that either. From the WMI Diagnostics it looks like there may be multiple errors of different kinds, but if it's that bad, I don't know how my computer's been working at all.

I've been using this computer for 9 months and had no major problems with it, although I did have a problem installing Microsoft Windows Genuine Advantage Notification, for which Microsoft sent me a script that fixed it. One other person here at work is suffering from this same WMI error, but most people have been able to install SQL 2005 here with no problem.

My boss does not want me to just do a full XP reinstall. He wants me to identify the specific problem and fix it. If this was my home computer I wouldn't spend so much time banging my head over this incomprehensible problem. But a full reinstall is not really an option for me in this case, unless maybe Microsoft says that's the only way to fix it.

I am available to deal with this issue during 9 to 5 eastern time Monday to Friday.

Thanks in advance for any help...
Eric

View 3 Replies View Related

Install Problem With SQL2005 Standard. Error 2908

Mar 25, 2008

I am attempting to install SQL Server 2005 on a Server 2003 Enterprise edition SP2 and fully Patched with all critical updates, including .net 3.5 Additional Information, this is on a Virtuial Server.
When I try to install it fails near the beginning and the log file contains the following.


Microsoft SQL Server 2005 9.00.1399.06
==============================
OS Version : Microsoft Windows Server 2003 family, Service Pack 1 (Build 3790)
Time : Mon Mar 24 07:34:15 2008

Machine : X205
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.1399.06
Install : Failed
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0004_X205_Support.log
Last Action : InstallFinalize
Error String : The installer has encountered an unexpected error. The error code is 2908. Could not register component {1F3316BE-825B-4390-A9D2-AF3EECCAE9F6}.
Error Number : 2908
====================================================================================

After doing some search engine digging I found some referances to simuilar problems being caused by .net. I tried uninstalling first 3.5, then 3.0 then 2.0sp1, at which point the install worked with only one error that SQL Management studio was unable to register (A bunch of black lines) although the sql installation seems to work. I then reinstalled .net 3.5 (Which also reinstalls 3.0 and updates 2.0 to SP1. Again S!QL seems to be healthy....
My Questions are:
1) is there a better way to do this???
2) If I do it this way do you see any l;ong term problems?

Kay

View 3 Replies View Related

WMI Config Error Installing SQL2k5 Standard Edition

Jan 19, 2007

This is (some of) the output from the Core(Local)log:

If possible, determine action
Machine = DJONES-XP, Article = WMIServiceWin32OSWorking, Result = 2147500034 (0x80004002)
Machine = DJONES-XP, Article = WMIServiceWin32CompSystemWorking, Result = 2147500034 (0x80004002)
Machine = DJONES-XP, Article = WMIServiceWin32ProcessorWorking, Result = 2147500034 (0x80004002)
Machine = DJONES-XP, Article = WMIServiceReadRegWorking, Result = 0 (0x0)
Machine = DJONES-XP, Article = WMIServiceWin32DirectoryWorking, Result = 70347 (0x112cb)
Machine = DJONES-XP, Article = WMIServiceCIMDataWorking, Result = 70347 (0x112cb)
Machine = DJONES-XP, Article = XMLDomDocument, Result = 0 (0x0)
*******************************************
Setup Consistency Check Report for Machine: DJONES-XP
*******************************************
Article: WMI Service Requirement, Result: Error
Description: Windows Management Instrumentation (WMI) is not functioning properly. Further checks cannot be performed. Action: Please make sure Windows Management Instrumentation (WMI) is functioning properly.
The SQL Server System Configuration Checker cannot be executed due to WMI configuration on the machine DJONES-XP Error:2147500034 (0x80004002).
The checkResult returned is 2147500034
The checkResult for local machine returned by CheckSCCResult is 70036
Setup is unable to proceed because one of scc articles failed. Please address those errors before continuing the setup.

Thanks DeWayne

View 14 Replies View Related

Error Installing Standard Edition On A Windows 2003 Server

Jun 17, 2005

I have a windows 2003 server with the latest service pack and patches. This server also acts a domain controller.

View 4 Replies View Related

Error Installing SQL Server 2005 (32Bit) On A Laptop With Windows 2003 Standard Edition

Dec 3, 2007

I am attempting to install SQL Server 2005 on a Laptop with Windows 2003 Standard Edition.

The installation fails and the File Summary.txt has the following entries:


Microsoft SQL Server 2005 9.00.1399.06
==============================
OS Version : Microsoft Windows Server 2003 family, Standard Edition Service Pack 2 (Build 3790)
Time : Fri Nov 30 09:36:53 2007

Machine : SAPDEMO
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_SQLSupport_1.log
--------------------------------------------------------------------------------
Machine : SAPDEMO
Product : Microsoft SQL Server Native Client
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_SQLNCLI_1.log
--------------------------------------------------------------------------------
Machine : SAPDEMO
Product : Microsoft SQL Server VSS Writer
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_SqlWriter_1.log
--------------------------------------------------------------------------------
Machine : SAPDEMO
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_SQLSupport_2.log
--------------------------------------------------------------------------------
Machine : SAPDEMO
Product : Microsoft SQL Server Native Client
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_SQLNCLI_2.log
--------------------------------------------------------------------------------
Machine : SAPDEMO
Product : Microsoft SQL Server 2005 Books Online (English)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_BOL_1.log
--------------------------------------------------------------------------------
Machine : SAPDEMO
Product : SQLXML4
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_SQLXML4_1.log
--------------------------------------------------------------------------------
SQL Server Setup failed. For more information, review the Setup log file in %ProgramFiles%Microsoft SQL Server90Setup BootstrapLOGSummary.txt.

Time : Fri Nov 30 09:38:41 2007

List of log files:
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_Core(Local).log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_SQLSupport_1.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_SQLNCLI_1.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_SqlWriter_1.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_MSXML6_1.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_SQLSupport_2.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_SQLNCLI_2.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_BOL_1.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_SQLXML4_1.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_Datastore.xml
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_.NET Framework 2.0.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_Core.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSummary.txt
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_.NET Framework 2.0 LangPack.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_.NET Framework Upgrade Advisor.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_.NET Framework Upgrade Advisor LangPack.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_.NET Framework Windows Installer.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_.NET Framework Windows Installer LangPack.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_SNAC.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_Support.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0006_SAPDEMO_SCC.log


The Log File, SQLSetup0004_<hostname>_Core.log, has the following entries:

Microsoft SQL Server 2005 Setup beginning at Mon Dec 03 08:54:09 2007
Process ID : 2980
C:SAP_CDCD2x86EnterpriseEditionServerssetup.exe Version: 2005.90.1399.0
Running: LoadResourcesAction at: 2007/11/3 8:54:9
Complete: LoadResourcesAction at: 2007/11/3 8:54:9, returned true
Running: ParseBootstrapOptionsAction at: 2007/11/3 8:54:9
Loaded DLL:C:SAP_CDCD2x86EnterpriseEditionServersxmlrw.dll Version:2.0.3604.0
Complete: ParseBootstrapOptionsAction at: 2007/11/3 8:54:9, returned true
Running: ValidateWinNTAction at: 2007/11/3 8:54:9
Complete: ValidateWinNTAction at: 2007/11/3 8:54:9, returned true
Running: ValidateMinOSAction at: 2007/11/3 8:54:9
Complete: ValidateMinOSAction at: 2007/11/3 8:54:9, returned true
Running: PerformSCCAction at: 2007/11/3 8:54:9
Complete: PerformSCCAction at: 2007/11/3 8:54:9, returned true
Running: ActivateLoggingAction at: 2007/11/3 8:54:9
Complete: ActivateLoggingAction at: 2007/11/3 8:54:9, returned true
Delay load of action "DetectPatchedBootstrapAction" returned nothing. No action will occur as a result.
Action "LaunchPatchedBootstrapAction" will be skipped due to the following restrictions:
Condition "EventCondition: __STP_LaunchPatchedBootstrap__2980" returned false.
Running: PerformSCCAction2 at: 2007/11/3 8:54:9
Loaded DLL:C:WINDOWSsystem32msi.dll Version:3.1.4000.4042
Loaded DLL:C:WINDOWSsystem32msi.dll Version:3.1.4000.4042
Complete: PerformSCCAction2 at: 2007/11/3 8:54:9, returned true
Running: PerformDotNetCheck at: 2007/11/3 8:54:9
Complete: PerformDotNetCheck at: 2007/11/3 8:54:9, returned true
Running: ComponentUpdateAction at: 2007/11/3 8:54:9
Complete: ComponentUpdateAction at: 2007/11/3 8:55:6, returned true
Running: DetectLocalBootstrapAction at: 2007/11/3 8:55:6
Complete: DetectLocalBootstrapAction at: 2007/11/3 8:55:6, returned true
Running: LaunchLocalBootstrapAction at: 2007/11/3 8:55:6
Error: Action "LaunchLocalBootstrapAction" threw an exception during execution. Error information reported during run:
"C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe" finished and returned: 1605
Aborting queue processing as nested installer has completed
Message pump returning: 1605

Regards

View 1 Replies View Related

How Do SQL 2000 Service Packs Play A Role In Upgrading?i.e.Can SQL 2000 Standard With No SP Be Upgraded To SQL 2005 Standard

Aug 2, 2006

How do SQL 2000 service packs play a role in upgrading? That is, can SQL 2000 Standard with no Service Packs(SP) be upgraded to SQL 2005 Standard, or does SQL 2000 Standard have to have a certain service pack??

View 1 Replies View Related

View Error

May 7, 2008

getting error when updting VIEW

UNION ALL view 'a.dbo.a'is not updatable because a partitioning column was not found. Severity 16 State 12 Example Line 194

Please advice..

Thanks,
ServerTeam

View 2 Replies View Related

View Error

May 4, 2007

Hi all
iam creating view as follows
if exists drop view v1
create view v1 as
Select Employee_id ,round((datediff(m,min(start_date),getdate()))/12.0,1) as Years from Sagarsoft.dbo.o_employeeexp (nolock) group by employee_id,start_date


i want to check before creatuing view but i gives erros as follows
Incorrect syntax near the keyword 'drop'.
'CREATE VIEW' must be the first statement in a query batch.
No rows affected.

Malathi Rao

View 15 Replies View Related

New View Error Message

Jun 4, 2002

I keep getting the following error message whenever I try to create a new view from my local machine.

An unexpected error happened during this operation...Query Designer encountere a Query error: Unspecified error

Any help would be greatly appreciated. Thanks

View 1 Replies View Related

Row Length Error With View

Nov 2, 2004

I'm having this problem with SQL Server 2000...

Sample query in view definition:

SELECT somecol1 FROM sometable1
UNION
SELECT somecol2 FROM sometable2

I'm returning more columns in the SELECT than I've put in the sample and all the datatypes match for each column. But...

I get the row error when the view is run. If I run the first part in it's own results are returned. If I run the second on it's own I get results. I only get the error when they are UNIONed. There's no ordering or grouping.

Why would each of them run individually but not UNIONed together?

Also, if I remove ('' instead of table.column) one of the larger nvarchar columns from the first or second query, the UNIONed statement returns results just fine.

Any help would be appreciated.

Thanks,

Mike

View 6 Replies View Related

Error While Trying To View Job History

May 15, 2008

I received this error while trying to view a job's history while using SSMS.

syntax error (ll DB Maint'']) (Microsoft.SqlServer.SmoEnum)

anyone see anything like this? I dropped a database yesterday that was included in the maintenance plan, but forgot to take it out of the plan itself.

View 2 Replies View Related

Error On New View Creation

Feb 1, 2006

Afternoon All

Hoping someone will be able to give me a little advice. I accidently delted a view from one of our application databases (Like you do!!).

I actually repliacated the database 2 month ago onto another server to do some testing. Me thinking I was clever decided to go to the copied database and copy the "syntax" for creating the view and then run it on the database I deleted the view but I get the following message I can't for the life of me work out what the problem is.

Has anyone seen this before ??

Server: Msg 207, Level 16, State 3, Procedure VP_TIMESHTPUNV42, Line 2
Invalid column name 'NAME'.
Server: Msg 207, Level 16, State 1, Procedure VP_TIMESHTPUNV42, Line 2
Invalid column name 'NAME'.

View 3 Replies View Related

Error Creating View

Jul 25, 2007

i tried running the statement :

(1)
create view qcostcentre
as
select * from dbo.costcentre.dtblcostcentre

>ERR: Msg 208, Level 16, State 1, Procedure qcostcentre, Line 4
Invalid object name 'dbo.costcentre.dtblcostcentre'.

(2)
create view qcostcentre
as
select * from costcentre.pcusers.dbo.dtblcostcentre

>ERR: Msg 7202, Level 11, State 2, Procedure qcostcentre, Line 4
Could not find server 'costcentre' in sys.servers. Verify that the correct server name was specified. If necessary, execute the stored procedure sp_addlinkedserver to add the server to sys.servers.


note: pcusers is a user of 2 database (costcentre & datamaster) with dbo_datareader owned & role schema .

View 3 Replies View Related

View Error When Opening

May 8, 2006

Hello, I get this error:

Could not allocate ancillary table for view or function resolution

When I try to open a view that has never had a problem before today. I called Microsoft support and got a hot fix sent to me but unfortunatly it didnt install at all. I get an error:

You do not have any instance of SQL installed on this computer that qualifies for this hotfix.
Please check version and service pack requirements for this hotfix

And according to KB articles this problem should have been fixed by SP4 (which I have). So I dont know what to do. Could someone please help me??

Thanks
Mark

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved