INSERT-EXEC
Apr 19, 2007
I need get the o/p of a system sp into a table. I am doing the following,
insert #repl_monitor
exec [distribution].sys.sp_replmonitorhelpsubscription @publisher =
N'FGRWA0508', @publisher_db = N'DB_Name', @publication = N'publication'
Code is really not important. Any sys SP can replace the above code.
I am getting the following error
Msg 8164, Level 16, State 1, Procedure sp_MSload_tmp_replication_status, Line 80
An INSERT EXEC statement cannot be nested.
I have seen the following link which discuss this issue,
http://www.sommarskog.se/share_data.html
But there is no solution there.
I tried with sp_executesql and EXEC(), but unable to get the result. Can anyone put some light?
------------------------
I think, therefore I am - Rene Descartes
View 8 Replies
ADVERTISEMENT
Jan 21, 2004
I need to insert the results into a temp table and i recieve the "MSDTC on server 'servername' is unavailable error".
declare @thestringall varchar(1000)
set @thestringall = 'select statment here'
insert into #temptable exec (@thestringall)
Thanks
Wooanaz
View 2 Replies
View Related
Dec 27, 2007
I've got a case where I am bringing older data into a brand new DB. Unfortunately, there are several versions of the old DB and I won't know ahead of time which one I will be running against. The data's basicaly the same, the table names are the same, but the column schema is NOT.
Basiclly, I want to use a conditional on the Insert.
Code Block
CREATE TABLE TestTable
(Col1 int NULL,
Col2 varchar(50) NULL)
GO
IF EXISTS (SELECT *
FROM INFORMATION_SCHEMA.COLUMNS
WHERE TABLE_CATALOG= 'TestDB'
AND TABLE_NAME ='TestTable'
AND COLUMN_NAME= 'Fred')
INSERT TestTable
(Col1, Col2, Fred)
VALUES
(1,'test', 'fredvalue')
This results in an "Unknown column" error.
What am I missing here and how can I accomplish it.
I know that I COULD build a SQL string and Exec it, but that is such a PITA and not very elegant.
Any help would be appreciated
View 3 Replies
View Related
Oct 23, 2007
Hi,
I have a stored procedure that transfers data from one database to another. I do a lot of manipulation to the data in between because although both databases are for the same purpose, the database designs are different. The two databases exist on two different servers. Till now my transfer procedure used a linked server to pull the data from one server to the other. This process takes a ton of time with complex queries across linked servers. I was researching on a faster method to transfer data and the only other working method seemed to be the insert..exec statement with which I can call a remote stored procedure which would run and return the results of the complex queries which I can then use locally as I wish.
My main question is, can I rely on insert..exec to work consistently and/or is there another method to achieve what I need that I'm totally ignorant of? I already know of inline/multi table value functions (they wont work across servers); openquery/openrowset (I need to be able to pass parameters); creating permanent tables to be used and then destroyed (not very appealing). I read an excellent article about these online by Erland Sommarskog (http://www.sommarskog.se/share_data.html) but I'm hoping someone can explain a little further.
Thanks all,
Anand
View 11 Replies
View Related
Nov 9, 2007
There must be some workaround for this. I need to grab the data from a stored proc on another server and place it into a temp table. I do not have the option to change the proc.
help if you can.
View 7 Replies
View Related
May 25, 1999
Hi,
has anyone come across deadlocks on sysindexes in tempdb where the insert/exec combination is used.
eg
create table #fred (IntColumn int)
insert into #fred exec ProcThatSelectsAnIntColumn
This is being done in a stored procedure, and is deadlocking with other procs which are doing vanilla #table work - creating, inserting into, updatind, selecting from, etc.
I have noticed similar deadlocks where a #table is created inside an explict transaction, and I wondered whether there is an implicit transaction created, but @@Nestlevel is not changing either before or after the insert/exec.
I can't find any references in knowledgebase.
Any pointers appreciated.
Cheers
Simon
________________________
Simon Davis
Bankers Trust Australia Limited
Asset Management Technology
Ph: 61 2 9259 9137
<mailto:Simon.Davis@Bankerstrust.com.au>
View 2 Replies
View Related
Jul 6, 2004
Hi all,
I have an sp that sends cdomail which requires 4 variables.
I want an after insert trigger that fills in the values for the sp from the record just submitted, how can i do that?
Sp code
CREATE PROCEDURE [dbo].[sp_send_cdosysmail]
@From varchar(100) ,
@To varchar(100) ,
@Subject varchar(100)=" ",
@Body varchar(4000) =" "
/************************************************** *******************
This stored procedure takes the parameters and sends an e-mail.
All the mail configurations are hard-coded in the stored procedure.
Comments are added to the stored procedure where necessary.
References to the CDOSYS objects are at the following MSDN Web site:
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/cdosys/html/_cdosys_messaging.asp
************************************************** *********************/
AS
Declare @iMsg int
Declare @hr int
Declare @source varchar(255)
Declare @description varchar(500)
Declare @output varchar(1000)
--************* Create the CDO.Message Object ************************
EXEC @hr = sp_OACreate 'CDO.Message', @iMsg OUT
--***************Configuring the Message Object ******************
-- This is to configure a remote SMTP server.
-- http://msdn.microsoft.com/library/default.asp?url=/library/en-us/cdosys/html/_cdosys_schema_configuration_sendusing.asp
EXEC @hr = sp_OASetProperty @iMsg, 'Configuration.fields("http://schemas.microsoft.com/cdo/configuration/sendusing").Value','2'
-- This is to configure the Server Name or IP address.
-- Replace MailServerName by the name or IP of your SMTP Server.
EXEC @hr = sp_OASetProperty @iMsg, 'Configuration.fields("http://schemas.microsoft.com/cdo/configuration/smtpserver").Value', 'smtp.bbeyond.nl'
-- Save the configurations to the message object.
EXEC @hr = sp_OAMethod @iMsg, 'Configuration.Fields.Update', null
-- Set the e-mail parameters.
EXEC @hr = sp_OASetProperty @iMsg, 'To', @To
EXEC @hr = sp_OASetProperty @iMsg, 'From', @From
EXEC @hr = sp_OASetProperty @iMsg, 'Subject', @Subject
-- If you are using HTML e-mail, use 'HTMLBody' instead of 'TextBody'.
EXEC @hr = sp_OASetProperty @iMsg, 'HTMLBody', @Body
EXEC @hr = sp_OAMethod @iMsg, 'Send', NULL
-- Sample error handling.
IF @hr <>0
select @hr
BEGIN
EXEC @hr = sp_OAGetErrorInfo NULL, @source OUT, @description OUT
IF @hr = 0
BEGIN
SELECT @output = ' Source: ' + @source
PRINT @output
SELECT @output = ' Description: ' + @description
PRINT @output
END
ELSE
BEGIN
PRINT ' sp_OAGetErrorInfo failed.'
RETURN
END
END
-- Do some error handling after each step if you have to.
-- Clean up the objects created.
EXEC @hr = sp_OADestroy @iMsg
GO
View 5 Replies
View Related
Jul 24, 2006
Hello,I want to share my experiences about using insert into exec which mayhelp others .Using SQL Server 2000, SP3 .Two Proceduers - Parent SP caliing a Child SP (nested ) . No Explicittransactions .I have defined a # table in Parent SP and calling a Child SP like thisinsert into #temp exec childsp ......Child SP has Select * from local # temp table ( local to child SP) as the last statement .When number of records are less ( around 1000 - 5000) Parent SPexecutes but slow .When the Child SP returns higher number of rows ( 1,00,000 or more )the SP will be running for hours with out completion .Although executing the child SP , with exec ChildSP .... with sameparameters it is completed in 2 mins for 3,00,000 rows .Resolution : - Define a temp table (say #tempChild ) in the Parent SP..In the Child SP instead of select * replace with insert into#tempChild select * from ...Also note that this problem is not noticed in SQL 2000 Server with SP4..This may be due to SP executing in implicit transactions .
View 1 Replies
View Related
Sep 19, 2007
I try to select a store procedure in SqlExpress2005 which inside store procedure execute another store procedure,
When I select it but it prompt error messages "An INSERT EXEC statement cannot be nested.".
In Fire bird /Interbase store procedure we can nested. Below are the code;
declare @dtReturnData Table(doccode nvarchar(20), docdate datetime, debtoraccount nvarchar(20))
Insert Into @dtReturnData
Exec GetPickingList 'DO', 0, 37256, 'N', 'N', 'YES'
Select doccode, docdate, debtoraccount
From @dtReturnData
Inside the GetPickList It will do like this, but most of the code I not included;
ALTER PROCEDURE GETPICKINGLIST
@doctype nvarchar(2),
@datefrom datetime,
@dateto datetime,
@includegrn char(1),
@includesa char(1),
@includedata nvarchar(5)
AS
BEGIN
declare @dtReturnData Table(doccode nvarchar(20),
docdate datetime,
debtoraccount nvarchar(20))
IF (@DOCTYPE = 'SI')
BEGIN
Insert Into @dtSALESINVOICEREGISTER
Exec SALESINVOICEREGISTER @DateFrom, @DateTo, @IncludeGRN, @IncludeSA, @IncludeData
END
ELSE
BEGIN
Insert Into @dtDELIVERYORDERREGISTER
Exec DELIVERYORDERREGISTER @DateFrom, @DateTo, @IncludeGRN, @IncludeSA, @IncludeData
END
Select doccode,docdate,debtoraccount From @dtReturnData
END
So how can I select a nested store procedure? can someone help me
View 1 Replies
View Related
Nov 9, 2006
Hi,
I have written a master proc which calls another proc (say proc1).
This proc1 has insert-exec statements, for eg insert into #temp exec proc1.
i.e. multiple times the proc would be nested.
This the err thrown :
An INSERT EXEC statement cannot be nested.
Is it possible to resolve it..
View 5 Replies
View Related
Jun 16, 2006
Hi All,
I am having a problem with nested insert exec. Say for example I have three stored procedure procA, procB and procC.
I am executing procedure procC in procB; I am storing the values returned by procC in a tempTable. The code is
INSERT INTO #Temp
EXEC procC
And in procA, I am executing procB, and the values returned by procB are stored in another temp table. The code is
INSERT INTO #TempOne
EXEC procC
When I execute the procA, I am getting error as
An INSERT EXEC statement cannot be nested.
My requirement is like this, please give me a solution.
Thanks
View 5 Replies
View Related
Apr 12, 2006
i have a 3 or 4 cursors, and in the inner cursor i am inserting into a table from a sproc. i keep getting the error
An INSERT EXEC statement cannot be nested.
heres the actual insert code:
set @SQLString = 'EXEC ScoresGetlines '+cast(@customerID as char(10))+',' + cast(@programId as char(10))+',' + '"'+ @period +'",NULL,NULL,0'
INSERT INTO reportData
exec (@sqlString)
ive tried just a simple :
insert into reportdata
exec scoreGetLines @customerId,@programID...........
that still doesnt work. same error. how can this be sorted
View 13 Replies
View Related
Feb 7, 2008
I am using the following statement in a SP.
EXECUTE (' INSERT INTO #OutPut
EXEC h_DailyDividend
@TickerTable = '+@TickerTableName+',
@DateTable = '+@DateTableName+',
@Units = '+@Units
)
AND IN h_DailyDividend I am using the following statement.
EXECUTE (' INSERT INTO #TickerTable
EXEC h_SecMstr_SecMap_TQAExch_Info
@IDList = '+@TickerTable+',
@IsTable = 1,
@Type = 0,
@OutPutFormat = 0,
@VenType = 14 ')
And i am getting the following error.
Message: An INSERT EXEC statement cannot be nested.
Can any body help me out how to solve this problem.
Regards
Sulaman
View 4 Replies
View Related
Sep 14, 2004
Hi all,
I have to insert records using transact iin the stored procedure. I have some thing like:
DECLARE @Err varchar(100)
DECLARE insertQ varchar(1000)
SET @Err = 'Insertion data'
SET @insertQ =('INSERT INTO dbo.T_ERRORLOG (ERROR_DESCR) VALUES(' + @Err + ')')
EXEC insertQ
But it don't work. Can you help me to solve the problem plz?
Thanks a lot
TT
View 4 Replies
View Related
May 20, 2008
Hi
When i use my insert-exec in my proc, say it Y, and the inner proc is X (don't contain an other insert-exec). when i call the Y proc in sql query analyzer the call is executed and it get me back results.
But when I call the Y proc from an ASP page, the execution is aborted, and I don’t know why, I have tested many thinks but it doesn’t work (for exp: the use commit transaction, set ....).
Please could you tell me if i miss some things i should add to my procs for the IIS web server could have right to execute my Y proc
Configuration of my application
- IIS Web server 6.0
- Sql Server 2000 SP 2.0
- TSQL as a sql language (of course)
- ASP as web porgramming language
- The call of the insert exec proc is as following:
o INSERT INTO #TMP_F_B (
o Field1 ,
o Field2,
o Field3 ,
o …,
o )
o EXEC dbo.ps_a5s_rpt_charge700 @util, @annee , @perimetre , @secteur , @poste , @fournisseur , @err , @lib_err
Many thanks
Sincerly
View 2 Replies
View Related
May 3, 2004
HI,
WELL WE HAVE BEEN TRYING TO AUTOMATE A PROCEDURE OUT HERE,AND WE ARE TRYING TO CONVERT MOST OF THE THINGS INTO PROCEDURES.
BUT WE ARE GETTING A FEW HICCUPS. PLS HELP
THIS IS HOW IT GOES :-
CREATE PROCEDURE MY_PROC1
AS
BEGIN
ST1 .........;
ST2..........;
END
CREATE PROCEDURE MY_PROC2
AS
BEGIN
CREATE TABLE #TMP2
(COL1 DATATYPE
COL2 DATATYPE)
INSERT INTO #TMP2
EXEC MY_PROC1
ST1 .........;
ST2..........;
END
THIS PROCEDURE TOO RUNS WELL ,AFTER TAKING THE DATA FROM THE FIRST PROC IT MANIPUATES THE DATA ACCORDING TO THE CRITERIA SPECIFIED
NO PROBLEM TILL NOW.......
BUT,
CREATE PROCEDURE MY_PROC3
AS
BEGIN
CREATE TABLE #TMP3
(COL1 DATATYPE
COL2 DATATYPE)
INSERT INTO #TMP3
EXEC MY_PROC2
ST1 .........;
ST2..........;
END
THEN IT GIVES AN ERROR AS :-
"An INSERT EXEC statement cannot be nested."
CAN'T WE , FROM A PROCEDURE CALL A PROCEDURE WHICH CALLS A PROCEDURE........
WHAT IS THE NESTING LEVEL OF A PROCEDURE ?
IS THERE ANY WAY AROUND IT OR CAN IT BE DONE BY CHANGING SOME SETTINGS ?
PLS HELP ME OUT IN THIS
THANKS
View 13 Replies
View Related
Aug 17, 2006
I'd *like* to execute a sProc within another sProc, because this other one (let's call it dataProc) will provide me with results I need that are calculated based off execing other procs within that proc itself.
I'd like to use this data in a new sProc (we'll call it newProc), but I don't need NEARly all of the columns. The dataProc returns 1 row with 42 columns. I need about 4-5 of those for my newProc.
The dataProc does not have any output variables, and I do not want to change the signature, because several pages/apps use this existing dataProc.
My question:
Is there a way to INSERT INTO table EXEC dataProc
*Without* making a temp table that takes in every single column the dataProc puts out?
Any help is much appreciated.. thanks!
View 8 Replies
View Related
Aug 15, 2005
Hi,I have a sproc with 5 params that takes about 40 seconds to return.But when I Create a Temp table and do aInsert Into #tempExec sproc param1, param2, param3, param4, param5it never returns...any ideas?Thanks,Bill
View 1 Replies
View Related
Nov 28, 2005
Hi,all,When I use following sql, an error occurs:insert into #tmprepEXECUTE proc_stat @start,@endThere is a "select * from #tmp " in stored procedure proc_stat, and theerror message is :Server: Msg 8164, Level 16, State 1, Procedure proc_stat, Line 42An INSERT EXEC statement cannot be nested.What's the metter? Any help is greatly appreciated. Thanks
View 2 Replies
View Related
Feb 17, 2004
I have 3 development SQL Servers A, B & C, all running SQL 2000 sp3 and Windows 2003. Servers B & C have a linked server pointing to A, and A has one pointing to B & C. The linkedservers all have RPC , RPC out enabled. I have a stored procedure called test on server A.
Create Proc test
as
Select Top 5 first_name, last_name from people
GO
--code ran on Servers B & C:
create table #tmptbl (nm varchar(100), nm2 varchar(100))
insert into #tmptbl
Exec ServerA.db1.dbo.test
When the Insert....Exec code above is ran from server B it works fine, however when I run it from Server C, I get error 7391
The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
[OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ]
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a]
But regular linked server calls (directly to tables) and openquery calls work fine from either server...
Eg
insert into #tmp
Select top 5 first_name, last_name from ServerA.db1.dbo.people
--and this works also
insert into #tmp
Select * from openquery(ServerA, 'Exec db1.dbo.test')
Both servers (B & C) appear to be configured the same, and
I have reconfigured MSDTC on all three boxes through control panel and component manager, have tried using SET xact_abort, SET implicit_transactions, registry hacks (TurnoffRPCsecurity), basically everything listed on Microsoft, and everything I've been able to find in these groups.
If anyone has any ideas, I'd like to hear them.
Tim.
View 3 Replies
View Related
May 18, 2006
Hello, I recently view a webcast of sql injection, and at this moment I created a user, and give dbo to this user, and this same user, is the one I have in the connection string of my web application, I want to create a user to prevent sql injection attacks, I mean that user wont be able to drop or create objects, only select views, tables, exec insert,update, deletes and exec stored procedures.
Is any easy way to do this?
A database role and then assing that role to the user?
View 4 Replies
View Related
May 14, 2008
Hello,
I have a stored procedure where I run an insert statement. I want to knwo if it is possible to do it using a variable for the table name (either in-line or with an EXEC statement without building a string first and executing that string. See examples of what I am talking about in both cases below:
I want to be able to do this (with or without the EXEC) :
------------------------------------------------------------------------------------
DECLARE @NewTableNameOut as varchar(100)
Set @NewTableNameOut = 'TableToInsertInto'
EXEC(
Insert Into @NewTableNameOut
Select * From tableToSelectFrom
)
------------------------------------------------------------------------------------
I can not do the above because it says I need to declare/set the @NewTableNameOut variable (assuming it is only looking at this for the specific insert statement and not at the variable I set earlier in the stored procedure.
I can do it like this by creating a string with the variable built into the string and then executing the string but I want to know if I can do it like I have listed above.
------------------------------------------------------------------------------------
DECLARE @NewTableNameOut as varchar(100)
Set @NewTableNameOut = 'TableToInsertInto'
EXEC(
'Insert Into ' + @NewTableNameOut + ' ' +
'Select * From tableToSelectFrom'
)
------------------------------------------------------------------------------------
It is not an issue for my simple example above but I have some rather large queries that I am building and I want to run as described above without having to build it into a string.
Is this possible at all?
If you need more info please let me know.
View 1 Replies
View Related
Jan 17, 2007
Greeting.
I use OdbcConnection inside clr procedure, for getting data. If I use simple EXEC dbo.clr_proc - all is OK. If I use INSERT...EXEC I recive error message: Distributed transaction enlistment failed.
I set MSDTC security options for No Authentification and Allow inbound and Allow outbound, but it's no use.
Have this problem solution? May be, I must use another method to get my data?
P.S. Linked Servers and OPENQUERY is not applicable. Sybase not describe columns in stored proc result set and one stored proc may return different result set by params.
P.S.S. Sorry for bad english.
View 1 Replies
View Related
Aug 5, 2007
I have the following query in sql 2005:
PROCEDURE [dbo].[uspInsert_Blob] (
@fName varchar(60),
@fType char(5),
@fID numeric(18, 0),
@bID char(3),
@fPath nvarchar(60)
)
as
DECLARE @QUERY VARCHAR(2000)
SET @QUERY = "INSERT INTO tblDocTable(FileName, FileType, ImportExportID, BuildingID, Document)
SELECT '"+@fName+"' AS FileName, '"+@fType+"' AS FileType, " + cast(@fID as nvarchar(18)) + " as ImportExportID, '"+@bID+"' AS BuildingID, * FROM OPENROWSET( BULK '" +@fPath+"' ,SINGLE_BLOB)
AS Document"
EXEC (@QUERY)
This puts some values including a pdf or .doc file into a table, tblDocTable.
Is it possible to change this so that I can get the values from a table rather than as parameters. The Query would be in the form of: insert into tblDocTable (a, b, c, d) select a,b,c,d from tblimportExport.
tblImportExport has the path for the document (DocPath) so I would subsitute that field, ie. DocPath, for the @fPath variable.
Otherwise I can see only doing a Fetch next from tblIportExport where I would put every field into a variable and then run this exec query on these. Thus looping thru every row in tblImportExport.
Any ideas how to do this?
View 1 Replies
View Related
Oct 31, 2007
I have two SQL Server 2000 (one is localhost, one is remote with VPN IP 192.168.5.4).
I can select * from [192.168.5.4].db.dbo.test but I can't exec [192.168.5.4].db..spAdd in localhost.
These select and sp is OK for 1 or 2 week without any problem,but it didn't work one day.
Can some one explain why?
View 5 Replies
View Related
Feb 29, 2000
When I use EXEC in a stored procedure ( after building complex option logic) it produces an returns an error of 'Access denied' on the underlying tables.
All objects are dbo owned and execute permission has been given to all users.
Can ant one help?
Rob
View 1 Replies
View Related
Jul 22, 2003
When using a SP for getting a recordset is there any issues with using exec like in: rs.open "exec spWhatever"...
Should I use rs.open "spWhatever" or does it really matter performance wise on the SQL server?
Thanks
View 4 Replies
View Related
Nov 1, 2007
I am trying to create a awkward sp, just need to know if i can do this somehow, here i piece of the code...
create procedure IM_SP_TrPreProc /*@TableName Varchar(255),*/ @SystemFileName Varchar(255)
---------------------------------------------
--Param1 = Tablename
--Param2 = Systemfilename
---------------------------------------------
as
declare @TableName Varchar(255);--Just For Testing---DELETE!!
declare @Filename varchar(255); --Store Distinct filename
declare @DSNo Varchar(255);-- Use 'set' to execute Var TableName
declare @SumUnits Varchar(255); --Use 'set' to calculate sum of units
declare @SumValue Varchar(255);
Set @TableName = 'TrDs01' -- Testing Only--DELETE!!
------------------------Set Statements using @TableName Var------------------------------------------
Set @DSNo = 'select distinct DataSupplierNo from ' + @TableName
Set @SumUnits = 'select sum(Units) from ' + @TableName
Set @SumValue = 'Select sum(Value) from ' + @TableName
------------------------------------------------------------------------------------------------------
Insert into TransactionMaster([FileName],DataSupplierNo,ImportFileRecordID,FileLoadDate,
UnitsSum,ValueSum,RecordCount)
Select(@Filename),(exec(DSNo)), ................
Just the Bold and underlined bit "exec(DSNo)"..... is this doable in some way? can i use exec to retrieve the value to insert to data supplier. As far as i know i have to do it like this because im using a variable as the table name...
View 2 Replies
View Related
Apr 28, 2006
I need help understanding the syntax of the "exec sql" statement.
i am looking at code that build an sql string such as
sql="exec SOMETHING Session("id")"
or something like that.
then, there is
conn.execute(sql)
My question is the "SOMETHING" in the sql statement...is what? I know it is user defined (object or variable or such), but what exactly is it? i look through the rest of the code and don;'t see SOMETHING defined elsewhere.
i am not sure if i am asking the question right. i don't understand what the SOMETHING is doing, or why it is there.
in particular, the code i am examining is
sql="exec SurveyDelete "&"'" & Session("StudentID") & " ' "
conn.execute(sql)
i understand the this statement will delete a record, but how does it handle "SurveyDelete", how does it know what the is when it is not defined anywhere else in the code?
View 2 Replies
View Related
Feb 17, 2006
Hi,
Can I execute my MDX statement as in the exhibit format!
DECLARE @test VARCHAR(MAX)
SET @test = 'WITH test AS (SELECT * FROM merchants)'
EXEC(@test)
SELECT * FROM test
If I don't use that dynamice sql statement, everything work fine.
Thanks,
Myo
View 1 Replies
View Related
Mar 28, 2006
Hi,
I have a written a SP to do indexdefrag to all user table indexes in a databases...I had to use dynamic sql so I can reuse this code for any DB...
declare @strsql varchar(500)
set @strsql = ' dbcc indexdefrag('+'''DBName'''+',554556545,3)'
exec (@strsql)
When I execute the above script, I immeaditely see the results in the query analyser like below:
Pages Scanned Pages Moved Pages Removed
------------- ----------- -------------
3 0 0
Looks like the indexdefrag did not happen since the logical fragmentation is still a high number like 30%.....
Just wondering whats goin on..
Thanks.
Ranga
View 3 Replies
View Related
Aug 29, 2007
Hi, I have an sql query like this :DECLARE @TableName varchar(200), @ColumnName varchar(200), @EmployeeID varchar(200), @Result varchar(200);SET @TableName = 'Customer';SET @ColumnName = 'First_Name';SET @CustomerID = 28;-- This line return ErrorSET @Result = EXEC ('select' + @ColumnName + ' from ' + @TableName + ' where Recid = ' + @CustomerID + '');Print @Result; I am pretty sure the SELECT statement in EXEC will only return 0 or 1 record. But how to capture result from EXEC? Thanks
View 1 Replies
View Related
Nov 7, 2000
is it possible to have a sproc with a input parm of a column name and have this column name be inserted into an exec statement that runs and provides the output as a OUTPUT parm instead of a result set?
i can get the sproc to take the column name as a parm, run the exec, but cannot figure out how to assign the "dynamic sql" output to a OUTPUT variable instead of returning the result set.
View 1 Replies
View Related
