INSERT INTO Tables Using Stored Procedures
Apr 28, 2007Hi,
I'm trying to insert some values into 2 tables using stored procedures (which should be pretty straight forward) but I'm running into problems.
Given below are my 2 sp that I'm using:
ADVERTISEMENT
SQL 2012 :: Generate Stored Procedures For Select / Insert / Update / Delete On Certain Tables?
Apr 3, 2015Is there a way in SQL server that can generate stored procedures for select, insert, update, delete on certain tables?
View 4 Replies View RelatedInsert Into Two Tables Without Procedures
Nov 25, 2007Hi,I need to make an insert into two tables connected to each other via foreign and primary key. The point is - I cannot use stored procedures or triggers. That tables looks like this: Candidate(ID, Name, Surname, Class) and Candidate_Exam(ID, date). ID in Candidate_Exam is a foreign key. When you insert a new record into Candidate, another one need to be inserted into Candidate_Exam with the same ID. Can anyone help? It is supposed to be an easy assigment so maybe I just have a bad approach.Regards,N.
View 3 Replies View RelatedHow To Search And List All Stored Procs In My Database. I Can Do This For Tables, But Need To Figure Out How To Do It For Stored Procedures
Apr 29, 2008How do I search for and print all stored procedure names in a particular database? I can use the following query to search and print out all table names in a database. I just need to figure out how to modify the code below to search for stored procedure names. Can anyone help me out?
SELECT TABLE_SCHEMA + '.' + TABLE_NAME
FROM INFORMATION_SCHEMA.TABLES
WHERE TABLE_TYPE = 'BASE TABLE'
SSIS And Stored Procedures Results Stored In #Tables
Mar 26, 2008Hello
I'm start to work with SSIS.
We have a lot (many hundreds) of old (SQL Server2000) procedures on SQL 2005.
Most of the Stored Procedures ends with the following commands:
SET @SQLSTRING = 'SELECT * INTO ' + @OutputTableName + ' FROM #RESULTTABLE'
EXEC @RETVAL = sp_executeSQL @SQLSTRING
How can I use SSIS to move the complete #RESULTTABLE to Excel or to a Flat File? (e.g. as a *.csv -File)
I found a way but I think i'ts only a workaround:
1. Write the #Resulttable to DB (changed Prozedure)
2. create data flow task (ole DB Source - Data Conversion - Excel Destination)
Does anyone know a better way to transfer the #RESULTTABLE to Excel or Flat file?
Thanks for an early Answer
Chaepp
INSERT INTO Using Stored Procedures
Apr 28, 2007Hi,I'm trying to insert some values into 2 tables using stored
procedures (which should be pretty straight forward) but I'm running
into problems.Given below are my 2 sp that I'm using: USE [DBName]
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE [dbo].[AddToProject] (@DeptCode varchar(20), @ProjectTitle varchar(300), @ProjectDetails varchar(3000), @ProjectManagerID int, @RequestedBy varchar(100), @DateRequested datetime, @DueDate datetime, @ProjectStatusID int)
AS
BEGIN TRANSACTION
SET NOCOUNT ON
DECLARE @Dept varchar(50), @ProjID varchar(50)
SET @Dept = REPLACE(CONVERT(char,@DeptCode),'.','')
EXEC ('INSERT INTO dbo.tbl_ProjectNumber' + @Dept + '(DeptCode) VALUES(' + @Dept + ')')
EXEC GetProjID @Dept, @ProjID OUTPUT
INSERT INTO dbo.tbl_Project (ProjID, ProjectTitle, ProjectDetails, ProjectManagerID, RequestedBy, DateRequested, DueDate, ProjectStatusID)
VALUES (@ProjID, @ProjectTitle, @ProjectDetails, @ProjectManagerID, @RequestedBy, @DateRequested, @DueDate, @ProjectStatusID);
COMMIT TRANSACTION
---------------------------------------------------------------------
USE [DBName]
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE [dbo].[GetProjID] (@DeptCode varchar(20), @ProjID varchar(50) OUTPUT)
AS
BEGIN
SET NOCOUNT ON
DECLARE @ProjectNumber varchar(100), @Table varchar(100)
SET @ProjectNumber = 'ProjectNumber' + REPLACE(CONVERT(char,@DeptCode),'.','')
SET @Table = 'dbo.tbl_ProjectNumber' + REPLACE(CONVERT(char,@DeptCode),'.','')
EXEC ( 'SELECT @ProjID = MAX('+@ProjectNumber + ') FROM ' + @Table )
SET @ProjID = @ProjID + '-' + @DeptCode
END When I run the AddToProject sp using the following values: USE [DBName]
GO
DECLARE@return_value int
EXEC@return_value = [dbo].[AddToProject]
@DeptCode = N'BAT',
@ProjectTitle = N'Some Title',
@ProjectDetails = N'Some Details',
@ProjectManagerID = 3,
@RequestedBy = N'Me',
@DateRequested = N'04/27/2007',
@DueDate = N'05/04/2007',
@ProjectStatusID = 4
SELECT'Return Value' = @return_value
GO
I get the following errors: Msg 128, Level 15, State 1, Line 1The name "BAT" is not permitted in this context. Valid expressions are constants, constant expressions, and (in some contexts) variables. Column names are not permitted.Msg 137, Level 15, State 1, Line 1Must declare the scalar variable "@ProjID".Msg 515, Level 16, State 2, Procedure AddToProject, Line 17Cannot insert the value NULL into column 'ProjID', table 'NYCEDC.dbo.tbl_Project'; column does not allow nulls. INSERT fails. If I run just the GetProjID sp, I get the following error: Must declare the scalar variable "@ProjID". -------------------------------------What I'm trying to do is, get a bunch of values from the aspx page, insert the DeptCode into the field DeptCode of the table 'tbl_ProjectNumber'+DeptCode so that the IDENTITY value field 'ProjectNumber'+DeptCode can increment by 1. After 'ProjectNumber'+DeptCode has incremented, I want to run the GetProjID sp so that I can insert ProjID into the 'tbl_Project' table along with the other values taken from the aspx page. ProjID is the primary key for the 'tbl_Project' table so it needs to be added along with the other values (other they obviously can't be added). I'm running the AddToProject as a Transaction to make sure that if more than 1 person is adding a project at the same time, the project numbers and other information don't get messed up. Any help would be appreciated.Thanks.
Tables And Stored Procedures
Jul 20, 2005SQL Server 2000:Question 1If you drop / rename a table and then recreate the table with the SAMENAME, what impact does it have on stored procedures that use these tables?From a system perspective, do you have to rebuild / recompile ALL the storedprocedures that use this table?I had a discussion with someone that said that this is a good idea, sincethe IDs of the tables change in sysobjects and from a SQL SERVER query planperspective, this needs to be done...Question 2If you Truncate a Tables as part of a BEGIN TRANSACTION, what happens if anerror occurs? Will it Rollback? The theory is that it won't becauseTruncate doesn't utilize the logs where as Delete From uses the SQL Logs?Thanks!
View 3 Replies View RelatedHow To Copy Some Tables, Stored Procedures
Feb 14, 2008hi I'm working in VS2005 with SQL server Express database.How can I copy some tables, stored procedures and diagrams from one database to another? thanks
View 3 Replies View RelatedCopy DB Tables And Stored Procedures To A New DB With Different Name
Feb 14, 2006Hello all!
What I need to do is take a site that I have and make 3 copies of it so I will have 4 separate sites with 4 separate DB's but running on the same server. One of the sites is complete but what I need to know is how do I make a complete copy of the DB including all stored procedures and populate a blank DB that has a different name with contents from the master DB???
So if DB1 is complete and I want to now populate DB2, DB3 and DB4 with everything from DB1 (tables, stored procedures, data etc.) what would be the best way to do this?
The new sites are already setup in IIS and I have already transferred the files to each sites root, so all that is left is to setup the new DB's. They are all running on the same server… I think that is about everything someone would need to know to help me!
Any help would be greatly appreciated!!!
Stored Procedures And Multiple Tables
Mar 2, 2006Hi,
I am hoping someone can help me with creation of a stored procedure. What i would basically like to do is have a SELECT stored Procedure that gets values from one table and then uses these values to retrieve data from another table.
i.e. I would like to retrieve 2 dates from another table (the table has a single record that holds the 2 dates) then I would like to use those two dates to retrieve all records of another table that fall between those 2 dates.
As I know nothing about stored procedures I'm not even sure how to go about this??
Regards.
Peter.
List Of All Tables Or Stored Procedures
Jan 17, 2008Is there any oen can tell me how i can run some system sp or exec something to list all tables or stored procedures in a database, like i use select statement to list some coulmn data? thanks in advance.
View 3 Replies View RelatedMultiple Stored Procedures ,same Tables
Sep 3, 2007
Hi,
I am using multiple stored procedures which are using same set of tables at a time .
As stored procedures dont have any DMLs. they are just select statement copied into a temporary table for further processing.
My issue is ,I dont want to wait one stored procedure until the other stored procedure is completed.
as one stored procedure is taking 43 secs and another sp is taking one min .they are conmbinely taking 1:43 mins
where i want to take just 1 min which is the time took by second sp
I want this because i am calling all the stored procedures more than 5 in my reporting services to show in one report which is taking huge time
Please suggest me how to proceed here.i am stuck
what should i do with the tables or stored procedures?
Thank you
Raj Deep.A
Stored Procedures With Temp Tables
Nov 23, 2007If you use a stored procedure that references one or more temp tables as data dource for a report, you get an error saying that the temp tables cannot be found when you click on the Layout tab. This happens even if you have executed the query in the Data tab before going to the Layout tab. The work around is to simply ignore the error but it is a distraction for the user. Is this a known big that is going to be fixed in a future release?
View 3 Replies View RelatedMultiple Stored Procedures,same Set Of Tables
Sep 3, 2007
Hi ,
I have a Report which has 8 stored procedures to get 8 resultant data sets . the stored procedures are almost similar such that they have only difference is the where clause and column getting returned.
So ,every stored access same set of tables and temporary tables getting created to store some set of active data derived from big table.
what happening is ,when i run the stored procedures individually in query analyser ,it is taking the time which is accepatable individually,but when i keep them in the same report. it is taking the time which is equal to sum of all the times taken by the stored procedures ran individually in query analyser which is some what not acceptable
can anybody through an idea,what can be done here. i already thought of locks and kept set transaction isolation level read uncomitted for all the stored procedures.but the time taking is same.
please help me here,i am stuck
Thank you
How To Insert The Range Of Ip Address In SQL Using Stored Procedures
Sep 14, 2007hi
i need to insert the list of ipaddress using stored procedures.
the user will give the from and to range of IP ADDRESS.i've to insert all the possible ip address between those values.
how to do this..
... Executing Stored Procedures In An INSERT Statement ...
Aug 28, 2002I am trying to simulate the <sequence name>.nextval of oracle in SQL Server 2000.
The situation is that i need to be able to run programmatically INSERT statements. In Oracle I am able to do INSERT INTO TABLE_A (ID, NAME) VALUES (TABLE_A_SEQUENCE.NEXTVAL, 'MIKKO') in a single prepared statement in my code.
I know that to recreate this in SQL Server 2000 I need to create a stored procedure and table to set up a way to generate "the next value" to use in my INSERT. but the schema below forces me to do my insert in 2 steps (first, to get the next value. second, to use that value in the INSERT statement), since I cannot execute the stored procedure inside my INSERT statement.
Is there any way for me to generate values within my INSERT statement that would simulate Oracle's <sequence name>.nextval and allow me to execute my INSERT in 1 line of code?
TABLE
-----
CREATE TABLE sequences (
-- sequence is a reserved word
seq varchar(100) primary key,
sequence_id int
);
MS SQL SERVER STORED PROCEDURE:
-------------------------------
CREATE PROCEDURE nextval
@sequence varchar(100)AS
BEGIN
-- return an error if sequence does not exist
-- so we will know if someone truncates the table
DECLARE @sequence_id int
set @sequence_id = -1
UPDATE sequences
SET @sequence_id = sequence_id = sequence_id + 1
WHERE seq = @sequence
RETURN @sequence_id
END
Change Schema Name On Tables And Stored Procedures
Sep 12, 2006Hi,Is there a way I can change schema name on tables and stored procedures? How do I do this?I´m very news to SQL and .netThanks
View 1 Replies View RelatedSqlDataSource And Stored Procedures With Temporary Tables
Dec 20, 2007Can a SqlDataSource or a TableAdapter be attached to a stored procedure that returns a temporary table? I am using Sql Server 2000.
The SqlDataSource is created with the wizard and tests okay but 2.0 controls will not bind to it.
The TableAdapter wizard says 'Invalid object name' and displayes the name of the temporary table.ALTER PROCEDURE dbo.QualityControl_Audit_Item_InfractionPercentageReport
@AuditTypeName varchar(50), @PlantId int = NULL,
@BuildingId int = NULL, @AreaId int = NULL,
@WorkCellId int = NULL, @WorkShift int = NULL,
@StartDate datetime = NULL, @EndDate datetime = NULL,
@debug bit = 0 AS
CREATE TABLE #QualityControl_Audit_Item_SelectDistinctByFilters_TempTable (ItemHeader varchar(100), Item varchar(250), HeaderSequence int, ItemSequence int, MajorInfractionPercent money, MinorInfractionPercent money)
DECLARE @sql nvarchar(4000), @paramlist nvarchar(4000)
SELECT @sql = '
INSERT INTO #QualityControl_Audit_Item_SelectDistinctByFilters_TempTable
(ItemHeader, Item, HeaderSequence, ItemSequence, MajorInfractionPercent, MinorInfractionPercent)
SELECT DISTINCT QualityControl_Audit_Item.Header,
QualityControl_Audit_Item.AuditItem,
QualityControl_Audit_Item.HeaderSequence,
QualityControl_Audit_Item.AuditItemSequence,
NULL, NULL
FROM QualityControl_Audit INNER JOIN
QualityControl_Audit_Item ON QualityControl_Audit.QualityControl_Audit_Id = QualityControl_Audit_Item.QualityControl_Audit_Id
WHERE (QualityControl_Audit.AuditType = @xAuditTypeName)'
IF @PlantId IS NOT NULL SELECT @sql = @sql + ' AND QualityControl_Audit.PlantId = @xPlantId'
IF @BuildingId IS NOT NULL SELECT @sql = @sql + ' AND QualityControl_Audit.BuildingId = @xBuildingId'
IF @AreaId IS NOT NULL SELECT @sql = @sql + ' AND QualityControl_Audit.AreaId = @xAreaId'
IF @WorkCellId IS NOT NULL SELECT @sql = @sql + ' AND QualityControl_Audit.WorkCellId = @xWorkCellId'
IF @WorkShift IS NOT NULL SELECT @sql = @sql + ' AND QualityControl_Audit.WorkShift = @xWorkShift'
IF @StartDate IS NOT NULL SELECT @sql = @sql + ' AND QualityControl_Audit.DateAuditPerformed >= @xStartDate'
IF @EndDate IS NOT NULL SELECT @sql = @sql + ' AND QualityControl_Audit.DateAuditPerformed <= @xEndDate'SELECT @sql = @sql + '
ORDER BY QualityControl_Audit_Item.HeaderSequence, QualityControl_Audit_Item.AuditItemSequence'
IF @debug = 1 PRINT @sqlSELECT @paramlist = '@xAuditTypeName varchar(50), @xPlantId int, @xBuildingId int, @xAreaId int, @xWorkCellId int,
@xWorkShift int, @xStartDate datetime, @xEndDate datetime'
EXEC sp_executesql @sql, @paramlist, @AuditTypeName, @PlantId, @BuildingId, @AreaId, @WorkCellId, @WorkShift, @StartDate, @EndDateDECLARE my_cursor CURSOR FOR
SELECT ItemHeader, Item, MajorInfractionPercent, MinorInfractionPercent FROM #QualityControl_Audit_Item_SelectDistinctByFilters_TempTable
OPEN my_cursor
--Perform the first fetchDECLARE @ItemHeader varchar(100), @Item varchar(250), @MajorInfractionPercent money, @MinorInfractionPercent money
FETCH NEXT FROM my_cursor INTO @ItemHeader, @Item, @MajorInfractionPercent, @MinorInfractionPercent
--Check @@FETCH_STATUS to see if there are any more rows to fetch.
WHILE @@FETCH_STATUS = 0
BEGIN
--Major
EXEC dbo.QualityControl_Audit_Item_InfractionPercentageReport_CalculateForMajorOrMinor @AuditTypeName, @PlantId, @BuildingId, @AreaId, @WorkCellId, @WorkShift, @StartDate, @EndDate, @ItemHeader, @Item, 'Major', @debug, @InfractionPercent = @MajorInfractionPercent OUTPUTUPDATE #QualityControl_Audit_Item_SelectDistinctByFilters_TempTable
SET MajorInfractionPercent = @MajorInfractionPercentWHERE (((ItemHeader IS NULL) AND (@ItemHeader IS NULL) OR (ItemHeader = @ItemHeader)) AND (Item = @Item))
--Minor
EXEC dbo.QualityControl_Audit_Item_InfractionPercentageReport_CalculateForMajorOrMinor @AuditTypeName, @PlantId, @BuildingId, @AreaId, @WorkCellId, @WorkShift, @StartDate, @EndDate, @ItemHeader, @Item, 'Minor', @debug, @InfractionPercent = @MinorInfractionPercent OUTPUTUPDATE #QualityControl_Audit_Item_SelectDistinctByFilters_TempTable
SET MinorInfractionPercent = @MinorInfractionPercentWHERE (((ItemHeader IS NULL) AND (@ItemHeader IS NULL) OR (ItemHeader = @ItemHeader)) AND (Item = @Item))
FETCH NEXT FROM my_cursor INTO @ItemHeader, @Item, @MajorInfractionPercent, @MinorInfractionPercent
END
CLOSE my_cursor
DEALLOCATE my_cursor
SELECT * FROM #QualityControl_Audit_Item_SelectDistinctByFilters_TempTable
Tables, Stored Procedures, Inserting, Retrieving....help :-)
Apr 8, 2008Hello there!
I've been sitting here thinking how to work through this problem but I am stuck. First off I have two tables I am working with.
Request TablerqstKey (this is the primary key and has the identity set to yes)entryDte datetimesummary nvarchar(50)etryUserID nvarchar(50)rqstStatusCdeKey bigint
ReqStatusCode TablerqstStatusCdeKey bigintstatusCode nvarchar(50)
I have webforms that are using Session variables to store information from the webpages into those variables and insert them into these tables. However, I am wanting to insert the rqstStatusCdeKey (from the ReqStatusCode Table) value into the Request Table. The rqstStatusCdeKey value i am wanting to insert is '3' which stands for "in Design" (((this is going to be the default value))). I need help :-/ If you need me to explain more/ clarify, and show more information I can. Thank you so much!!!
SQL Server Stored Procedures, Tables And Parameters
May 19, 2004Hi,
I was just wondering if something could be explained to me.
I have the following:
1. A table which has fields with data types and lengths / sizes
2. A stored procedure for said table which also declares variables with datatype and lengths/ sizes
3. A function in written in VB .net that uses said stored procudure. The code used to add the parameters to the sql command also requires that i give a data type and size.
How come i need to specify data type and length in three different places? Am i doin it wrong?
Any information is greatly appreciated.
Thanks
Im using SQL Server 2000 with Visual Studio .Net using Visual Basic..
Temp Tables Created In Stored Procedures
Feb 12, 2008Are they unique to a user/session? Like if 2 users simultaneously run the stored procedure?
TIA!
How To Make Tables && Stored Procedures In MSDE?
Nov 18, 2005Hello, I am a beginner using MSDE & Visual Basic.NET standard version (not Visual Studio.NET) . MSDE was downloaded from microsoft.com yesterday, which is sql2ksp3.exe.
View 15 Replies View RelatedRenaming Tables And Stored Procedures In Bulk !!
Feb 12, 2008Hello Friends!!
I have a great problem !!
I have a database having around 50 tables and around 70 t0 100 stored procedures.
due to certain reason name of all the table and procedure was prefixed with "cls" ,
now i want to rename them by "tbl_" using some query !! in bulk ,
and tables have relation ships.
so how to rename them !!
is there any way that I can rename them by modifying data in any system table !?
Lost SQL 2005 Tables And Stored Procedures
Apr 21, 2006I converted a program from SQL 2000 to SQL 2005 all went well. I created a number of tables and stored procedures after the conversion. I backed up my .mdf and .idf files. I was having problems with SQL so I uninstalled and re-installed it. Once I re-installed it I could no longer display some tables and files. Since I am the dbo, I think I should be able to access them. There obviously is something I am missing, hopefully not the tables and sps.
I would appreciate any suggestions.
Thank you.
LitePipe
SQL SERVER TEMPORARY TABLES In STORED PROCEDURES
Jun 3, 2006There are two ways to create a temporary tables in stored procedures
1: Using Create Table <Table Name> & then Drop table
ex. Create Table emp (empno int, empname varchar(20))
at last : drop table emp
2. Using Create table #tempemp
( empno int, empname varchar(20))
at last : delete #tempemp
---which one is preferrable & why.
what are the advantages & disadvantages of the above two types.
Using Stored Procedures To Insert And Pull Data From Database
Mar 21, 2008I have my database: "RequestTrack"
My table (with its columns): "Request"RequestKey (automatically generated)..and the Primary KeyEntryDate (datetime)Summary (nvarchar)RequestStatusCodeKey (bigint)EntryUserID (nvarchar)EntryUserEmail (nvarchar)I am wanting to create a basic web form where my user interface has 3 text boxes and a Submit button:
txtUserID.TexttxtEmailAddress.TexttxtRequestSummary.Text
**After I hit the submit button the information will then be inserted into the database. Also the RequestStatusCodeKey will be MANUALLY typed in so that will not require the user to add that. Please please please help ! I've been searching online for days and looking at various websites and still havent found anything. I've found somethings but they went into too much depth with too much information. I am just wanting to stay basic but w/o using SQLDataSource Controls. I would like to be able to store a lot of data. Thanks for your help!!!
Having Difficulty With FormView, Stored Procedures And Insert Parameter
Feb 17, 2005I setup the databse and Visual Web Developer to use
stored procedures when the insert command is used. The
database also uses the field UserName that I pass using a
SessionParameter within the InserParameter block from the
Membership.GetUser.Username from the aspnet_ tables.
My difficulty is when using the "Formview" as the body to
with which to insert (I wanted the design versatility of
FormView) I get an error: "system.formatExpression: Input
string was not in a correct format" when I leave the
textboxes empty and invoke the insert command. I first
assumed that the bound textboxes are not being converted
correctly when left blank, so I used the
ConvertEmptyStringToNull=True, with no success. I then
coupled that with the Type=[correct format] still with
the same error. Alas, my final attempt was to set
defaults in the "ALTER PROCEDURE" within the stored
procedure itself.
Any help would be most appreciated. Thanks.
.
Stored Procedures - Insert Data Gathered From Sele
Mar 28, 2008Hi,
I am trying to write a stored procedure, which does a couple of things.
First thing is it looks up a persons Location based on an ID number, which is passed from an external Script. This will return four Values from a table.
I want to insert those four values into another table, along with another ID passed to the procedure from the same script.
My question is, what do I do to the script below to get the four values out of the first look up, into the insert?
The Field names returned from the SELECT are, AREA1, AREA2, AREA3, AREA4
Thanks
David
CREATE PROCEDURE UserAssign_Location
@UserID Int, @AreaID Int
AS
BEGIN
SET NOCOUNT ON;
SELECT * From Locations Where EntryID = @AreaID
INSERT INTO Members_Locations (UserID, Location1, Location2, Location3, Location4, Active)
VALUES (@UserID, 'AREA1', 'AREA2', 'AREA3', 'AREA4', 1)
END
GO
Learning Stored Procedures For Querying Tables With Parameters
Sep 3, 2007I am learning T SQL and SQL queries and have limited VB knowledge, and have a some simple queries to run on a table with parameters, and would like verification of the proposed methodology and suggestions.
Simply put, I have a [Transactions] table with columns [Price], [Ticker], [TransDate], [TransType] and calculated columns for [Days] and [Profit].
There are two parameters, [@Dys] (to query a the table for transactions within a certain period[Days = 30] and [@TT] to query only the closed transactions ie... [TransType='C']
I have been studying Stored Procedures and will be writing a Stored Procedure, but need verification if the following will work... Getting the SUM and AVG calcluations for the fields above is not a problem but I need to display SUM and AVG information also for those transactions where [Profit >0] and [Profit <0], which is easy enough by creating a subquery. But the problem is:
1. If I use a SubQuery for [Profit <0] and for [Profit>0], can I create an alias for [Count(*)] (to get a row or transaction count for each, and then divide that into the Total [Count(*)] alias for the Transactions table to get a value for % profitable or Probability (% total Profitable trades versus % total Unprofitable trades)?
2. Or, do I need to create either temporary tables or views to have 3 distinct tables (1 table for Transactoins and 2 temp or Views for [Profit >0] and [Profit <0])?
Any suggestions and advice or examples on how to do this would be appreciated.
Craig
My questions are:
Problem In Stored Procedures When I Change The Name Of The Tables Of Fields
Oct 5, 2004Hi My friends
I have develop big Database System in Microsoft SQL Server 2000 and my DB System content more then 30 Table and also more then 150 Stored procedure and from that stored procedures I have call my the tables
But the problem when I change the name of any table, SQL Server don’t prompt my about the stored procedure that use that table .. so I cant remember witch Stored procedure use that table
By example if I am in programming language like C# or VB.NET when I try to change any name of any class the compiles catch all the error that coming from changing the name of the class and simply I will fix the problem because the compiler help me and list all the object content the error
But in SQL Server how can I search for stored procedure that use un existing table like compiler in any programming language ??
Or is there any why to solve my problem ??
And the above problem also there when I change the filed name
And thanks with my best regards
Fraas
Editing Tables & Writing Custom Stored Procedures
Feb 26, 2007Hi all,
I’m currently writing a web application on student exam timetables, I’m using SQL Server 2005 as the back-end for the database.
At present, the case states that if a student is in one examination, he/she can’t attend, or be allocated another examination while the first examination is in place, which would result in a clash
The way I’m going to target this is by writing a stored procedure in SQL Server 2005 to return an error code, which I’ll translate using ASP,NET, however at present I’m having difficulty writing the SQL code. This is because…
I’m using SQL Server 2005 Management Studio; I created the tables using MS Access and upsized them using the wizard. I can now access my database, but having difficulty editing my tables and with code…
Any ideas??
Thank-you
Writing Insert And Update Stored Procedures For Normalized Schemas?
May 25, 2006I have a database schema that has an Address table used to store addresses for different entities such as Customers and Employees. I want to reuse the same Address record between different Customers and Employees without duplicating any address information. I'm not sure what the best approach might be.
Should have I have seperate stored procedures on the Address table that update and insert new addresses, where each Address record remains immutable once created? (So the update stored procedure actually creates a new Address record if the data changes). These stored procedures would then be invoked by business logic and used in tandem with stored procedures that act on Customers and Employees to ensure that no address records are duplicated.
Or should I create a view on a Customer joined with Address, and similarily with Employee and Address, and have stored procedures that act on these views and ensure that no Address records are duplicated. Should I use instead of triggers to override the behavior of insert and update on the view to achieve these?
I'm rather lost as to what direction I should take. Any help would be much appreciated, thanks!
Switching Schema Ownership Of Views, Stored Procedures, Tables
Feb 20, 2007Hi all--I used the following type of script to migrate tables, views and stored procedures from 'dbo' to 'hqmsuser':
alter authorization on dbo.PK_T_PQ_MASTER to HQMSUSER
alter schema HQMSUSER transfer dbo.PK_T_PQ_MASTER
go
This was per recommendations from the BOL to use instead of the 'sp_changeobjectowner' procedure. I returned the following error:
Msg 15346, Level 16, State 1, Line 3
Cannot change owner for an object that is owned by a parent object. Change the owner of the parent object instead.
Msg 15347, Level 16, State 1, Line 4
Cannot transfer an object that is owned by a parent object.
How do I find and change the parent object on this from 'dbo' to a non-dbo schema ownership?