I have a .txt file with the data fields below. I am trying to create a SQL query or CF statement that will convert the data into a a SQL INSERT statement. The plan would be to run the query, which would create a TEMP table to pull in the created INSERT statement, then place the TEMP table data into an already created table named FinalTable.
data1,data2,1,1 of 1,"data5",data6
data1,data2,1,1 of 1,"data5",data6
data1,data2,1,1 of 1,"data5",data6
Hello,
This is my foray into Stored procedures, so I'm hoping this is a fairly basic question.
I'm writing a stored procedure, in which I dynamically create an SQL statement.
At the end of this, the SQL statement reads like:
Code SnippetSELECT COUNT(*) FROM StockLedger WHERE StockCode = 'STOCK1' AND IsOpen = 1 AND SizeCode = 'L' AND ColourCode = 'RED' AND LocationCode IS NULL AND RemainingQty > 0
Now this statement works a charm, and returns a single value. I want to assign this count to a variable, and use it further on in the stored procedure. This is where the problems start - I cant seem to do it.
If I hard code a statement, like
Code SnippetSELECT @LineCount = COUNT(*) FROM StockLedger
that works fine (although it brings back a count of all the lines).
But if I modify the dynamically created SQL Statement from earlier on to:
Code SnippetSELECT @LineCount = COUNT(*) FROM StockLedger WHERE StockCode = 'STOCK1' AND IsOpen = 1 AND SizeCode = 'L' AND ColourCode = 'RED' AND LocationCode IS NULL AND RemainingQty > 0
it doesnt work - it complains: Must declare the scalar variable "@LineCount".
Just to clarify, when I say "dynamically created an SQL statement, I mean that by a bunch of conditional statements I populate a varchar variable with the statement, and then eventually run it exec(@SQLStatementString)
So, my question would be, how do I do this? How do I make a dynamically generated SQL statement return a value to a variable?
Below is a simplified table & dataset to illustrate a problem I'm experiencing with a more complex one.
Code Block
create table #test(
recno smallint PRIMARY KEY,
value decimal (18,2))
insert into #test values (1, 3.57)
insert into #test values (2, 5.32)
insert into #test values (3,6.29)
insert into #test values (4, 9.25)
insert into #test values (5, 0.84)
Method 1: I tried inserting rows from #test into a temp table (#table) as follows
Code Block
declare @n as nvarchar(3)
set @n = 1
while @n <= (select count(recno) from #test)
begin
exec ('
insert into ##table
select *,
originalrecno = (select recno from #test where recno = '+@n+')
from #test'
)
set @n = @n + 1
end
However, this yields an error message:
Code Block
Server: Msg 208, Level 16, State 1, Line 2
Invalid object name '##table'.
Note - you can comment out the insert into ##table line above to view the results that I'm trying to put into ##table.
Method 2: next I tried explicitly creating ##table & rerunning the loop containing the insert
Code Block
create table ##table (
recno smallint,
value decimal (18,2),
originalrecno smallint)
declare @n as nvarchar(3)
set @n = 1
while @n <= (select count(recno) from #test)
begin
exec ('
insert into ##table
select *,
originalrecno = (select recno from #test where recno = '+@n+')
from #test'
)
set @n = @n + 1
end
This worked - it inserted the data from the select statements in the loop into ##table.
Question - why won't method 1 work?
<p>Hi ,
I would like to know anyway to insert two strings into a row with 2 lines created?My codes are as below
If NodeName = "subProductPrice" Then If xmlrder.NodeType = Xml.XmlNodeType.Text Then SubPrPriceList.Add(xmlrder.Value)
For i = 0 To SubPrPriceList.Count - 1 SubPrPrice = CStr(SubPrPriceList.Item(i)) PriceBrkDownStr &= SubPrPrice
Next
PricePerDay = SvcDate & PriceBrkDownStr dr("dailyPrice") = PricePerDay End If End If
Although both the SvcDate and PriceBrkDownStr are inserted into the same row but they are displayed into one line such as below:
<u>dailyPrice </u>02/03/2007 03/03/2007 120 230
Any idea how to make the date and price separate into two rows in the same table grid row? thanks =)</p>
why my insert or into is not working in my SQL Server R2 2008. I have a code I am using on an existing table and trying to put the data in a brand new table but it keeps giving me an error
select mCid, caucasian, aa, api, aian, mr, his, max(val)
into memberrand
from MEMBERV2_RAND
cross apply (
select AA union all
select API union all
select AIAN union all
select MR union all
select HIS union all
select CAUCASIAN
) v(val)
group by mCid, AA, API, AIAN, MR, HIS, caucasian
;
The error is: Msg 1038, Level 15, State 5, Line 1..An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.Do I have to actually create this table with no values first and then run the query? I was hoping this was sort of a make a table query
Hi,
I am working on inserting information into a DB and then retrieving the ID created for that Data to use elsewhere in my code. I have the code below but I do not know how to get toOutput parameter. Can anyone please help?
CREATE PROCEDURE dbo.InsertProduction
@DATEOUT datetime(8),
@DATEREQUIRED datetime(8),
@PREPAREDBY varchar,
@COMMENTID INteger,
@TOTALQUANTITY INteger,
@VENDORID INteger,
@WPO varchar,
@TCAPONUMBER INteger,
@APPROVEDBY varchar,
@Identity int OUT
AS
INSERT INTO PRODUCTION (DATEOUT,DATEREQUIRED, PREPAREDBY, COMMENTID, TOTALQUANTITY, VENDORID, WPO, TCAPONUMBER, APPROVEDBY) VALUES( @DATEOUT, @DATEREQUIRED, @PREPAREDBY, @COMMENTID, @TOTALQUANTITY, @VENDORID, @WPO, @TCAPONUMBER, @APPROVEDBY)
SET @Identity = SCOPE_IDENTITY()
'collect all the information from the form and then apply all and then update
'Get a reference to the Production table.
Dim dtProduction As DataTable = DS.Tables("Production")
Dim dtLineItem As DataTable = DS.Tables("LineItems")
' Create the SqlCommand to execute the stored procedure.
Production.InsertCommand = New SqlCommand("dbo.InsertProduction", connection)
Production.InsertCommand.CommandType = CommandType.StoredProcedure
' Add the parameter for the CategoryName. Specifying the
' ParameterDirection for an input parameter is not required.
'Production.InsertCommand.Parameters.Add("@CategoryName", SqlDbType.NVarChar, 15, "CategoryName")
Production.InsertCommand.Parameters.Add("@DATEOUT", SqlDbType.DateTime, 8, "CategoryName")
Production.InsertCommand.Parameters.Add("@DATEREQUIRED", SqlDbType.DateTime, 8, "CategoryName")
Production.InsertCommand.Parameters.Add("@PREPAREDBY", SqlDbType.VarChar, 50, "CategoryName")
Production.InsertCommand.Parameters.Add("@COMMENTID", SqlDbType.Int, 4, "CategoryName")
Production.InsertCommand.Parameters.Add("@TOTALQUANTITY", SqlDbType.Int, 4, "CategoryName")
Production.InsertCommand.Parameters.Add("@VENDORID", SqlDbType.Int, 4, "CategoryName")
Production.InsertCommand.Parameters.Add("@WPO", SqlDbType.VarChar, 50, "CategoryName")
Production.InsertCommand.Parameters.Add("@TCAPONUMBER", SqlDbType.Int, 4, "CategoryName")
Production.InsertCommand.Parameters.Add("@APPROVEDBY", SqlDbType.VarChar, 50, "CategoryName")
' Add the SqlParameter to retrieve the new identity value.
' Specify the ParameterDirection as Output.
Dim parameter As SqlParameter = Production.InsertCommand.Parameters.Add("@Identity", SqlDbType.Int, 0, "ProductionID")
parameter.Direction = ParameterDirection.Output
' Create a new row with the same schema.
Dim dr As DataRow = dtProduction.NewRow()
'you need the ID from this to insert into the Production DB
' Set the value of all the columns.
dr("DateOut") = CDate(DateTimePicker1.Text)
dr("DateRequired") = CDate(DateTimePicker2.Text)
dr("VendorID") = CInt(vendorbox.SelectedValue)
dr("HomeAddress") = txtApproved.Text.ToString
dr("ApprovedBy") = txtPrepared.Text.ToString
dr("TCAPO") = CInt(txtTCAPO.Text.Trim)
dr("CommentID") = CommentID
dr("TotalCost") = CDec(txtTotals.Text)
dr("TotalQuantity") = CInt(txtQtyTotal.Text)
' Add to the Rows collection or table .
dtProduction.Rows.Add(dr)
'Update the Production Table and then retrieve the ID created in this case
Production.Update(dtProduction)
Dollarjunkie
It seems to me that files created on Unix machines with line terminator , or chr(10), cannot be imported using the Bulk Insert statement. Is this a bug, or an oversight by Microsoft? Does this mean that unless one replaces all with
, there is no way to use Bulk Insert to import Unix files? This is a very strange behavior by MSSQL. Even lessor programs such as Excel and Word automatically recognize chr(10) as a line termination character. Am I missing something, or is this just the way MSSQL is?
I've have a need with SQL Server 2005 (so I've no MERGE statement), I have to merge 2 tables, the target table has 10 fields, the first 4 are the clustered index and primary key, the source table has the same fields and index.Since I can't use the MERGE statement (I'm in SQL 2005) I have to make a double step operation, and INSERT and an UPDATE, I can't figure how to design the WHERE condition for the insert statement.
View 2 Replies View RelatedI have a four tables called plandescription, plandetail and analysisdetail. The table plandescription has the columns DetailQuestionID which is the primary and identity column and a QuestionDescription column.
The table plandetail consists of the column PlanDetailID which the primary and identity column, DetailQuestionID which is the foreign key attribute of plandescription table and a planID column.
The third table analysisdetail consists of a analysisID which the primary and identity column, PlanDetailID which is the foreign key attribute of plandetail table and a scenario.
Below is the schema of the three tables
I have a two web form that will insert, update and delete data into these three tables in a two transaction. One web form will perform CRUD operations in plandescription and plandetail table. When the user inserts QuestionDescription and planid in this web form, I will insert the QuestionDescription Value in the plandescription table and will generate a DetailQuestionID value and this value is fed to the plandetail table with the planid. Here I will generate a PlanDetailID.
Once this transaction is done, I will show the second web form in which the user enters the scenario and this will be mapped with the plandescription using the PlanDetailID.
This schema cannot be changes as this is the client requirement. When I insert values I don’t have any problem. However when I update existing data, I need to delete existing PlanDetailID in the plandetail table and recreate PlanDetailID data for that DetailQuestionID and planID. This is because, the user will be adding or deleting a planID associated with the QuestionDescription.
Once I recreate PlanDetailID for that DetailQuestionID and planID, I need to update the old PlanDetailID with the new PlanDetailID in the third table analysisdetail for the associated analysisID.
I created a #Temp table called #DetailTable to insert the values analysisID, planid and old PlanDetailID and new PlanDetailID so that I can have them in update statement once I delete the data from plandetail table for that PlanDetailID.
Then I deleted the plandetailid from the plandetail table and recreate PlanDetailID for that DetailQuestionID. During my recreation I fetched the new PlanDetailID’s created into another temp table called #InsertedRows
After this I am running a while loop to update the temp table #DetailTable with the newly created PlanDetailID for the appropriate planID’s. The problem is here. When I have the same number of planID’s for example 2 planID’s 1,2 I will have only two old PlanDetailID and new PlanDetailID for that planID and analysisID.But When I add a new PlanID or remove a existing planID I am getting null value for that newly added or deleted planID. This is affecting my update statement of analysisdetail table as PlanDetailID cannot be null.
I tried to remove the Null value from the #DetailTable by running the update statement of analysis detail in a while loop however its not working.
DECLARE @categoryid INT = 8
DECLARE @DetailQuestionID INT = 1380
/*------- I need the query to run for the below three data.
Here i'm updating my planids that already exists in my database*/
DECLARE @planids VARCHAR(MAX) = '2,4,5'
[code].....
An insert statement was not inserting all the data into a table. Found it very strange as the other fields in the row were inserted. I ran SQL profiler and found that sql statement had all the fields in the insert statement but some of the fields were not inserted. Below is the sql statement which is created dyanmically by a asp.net C# class. The columns which are not inserted are 'totaltax' and 'totalamount' ...while the 'shipto_name' etc...were inserted.there were not errors thrown. The sql from the code cannot be shown here as it is dynamically built referencing C# class files.It works fine on another test database which uses the same dlls. The only difference i found was the difference in date formats..@totalamount=1625.62,@totaltax=125.62are not inserted into the database.Below is the statement copied from SQL profiler.exec sp_executesql N'INSERT INTO salesorder(billto_city, billto_country, billto_line1, billto_line2, billto_name,billto_postalcode, billto_stateorprovince, billto_telephone, contactid, CreatedOn, customerid, customeridtype,DeletionStateCode, discountamount, discountpercentage, ModifiedOn, name, ordernumber,pricelevelid, salesorderId, shipto_city, shipto_country,shipto_line1, shipto_line2, shipto_name, shipto_postalcode, shipto_stateorprovince,shipto_telephone, StateCode, submitdate, totalamount,totallineitemamount, totaltax ) VALUES(@billto_city, @billto_country, @billto_line1, @billto_line2,@billto_name, @billto_postalcode, @billto_stateorprovince, @billto_telephone, @contactid, @CreatedOn, @customerid,@customeridtype, @DeletionStateCode, @discountamount,@discountpercentage, @ModifiedOn, @name, @ordernumber, @pricelevelid, @salesorderId,@shipto_city, @shipto_country, @shipto_line1, @shipto_line2,@shipto_name, @shipto_postalcode, @shipto_stateorprovince, @shipto_telephone,@StateCode, @submitdate, @totalamount, @totallineitemamount, @totaltax)',N'@billto_city nvarchar(8),@billto_country nvarchar(13),@billto_line1 nvarchar(3),@billto_line2 nvarchar(4),@billto_name nvarchar(15),@billto_postalcode nvarchar(5),@billto_stateorprovince nvarchar(8),@billto_telephone nvarchar(3),@contactid uniqueidentifier,@CreatedOn datetime,@customerid uniqueidentifier,@customeridtype int,@DeletionStateCode int,@discountamount decimal(1,0),@discountpercentage decimal(1,0),@ModifiedOn datetime,@name nvarchar(33),@ordernumber nvarchar(18),@pricelevelid uniqueidentifier,@salesorderId uniqueidentifier,@shipto_city nvarchar(8),@shipto_country nvarchar(13),@shipto_line1 nvarchar(3),@shipto_line2 nvarchar(4),@shipto_name nvarchar(15),@shipto_postalcode nvarchar(5),@shipto_stateorprovince nvarchar(8),@shipto_telephone nvarchar(3),@StateCode int,@submitdate datetime,@totalamount decimal(6,2),@totallineitemamount decimal(6,2),@totaltax decimal(5,2)',@billto_city=N'New York',@billto_country=N'United States',@billto_line1=N'454',@billto_line2=N'Road',@billto_name=N'Hillary Clinton',@billto_postalcode=N'10001',@billto_stateorprovince=N'New York',@billto_telephone=N'124',@contactid='8DAFE298-3A25-42EE-B208-0B79DE653B61',@CreatedOn=''2008-04-18 13:37:12:013'',@customerid='8DAFE298-3A25-42EE-B208-0B79DE653B61',@customeridtype=2,@DeletionStateCode=0,@discountamount=0,@discountpercentage=0,@ModifiedOn=''2008-04-18 13:37:12:013'',@name=N'E-Commerce Order (Before billing)',@ordernumber=N'BRKV-CC-OKRW5764YS',@pricelevelid='B74DB28B-AA8F-DC11-B289-000423B63B71',@salesorderId='9CD0E11A-5A6D-4584-BC3E-4292EBA6ED24',@shipto_city=N'New York',@shipto_country=N'United States',@shipto_line1=N'454',@shipto_line2=N'Road',@shipto_name=N'Hillary Clinton',@shipto_postalcode=N'10001',@shipto_stateorprovince=N'New York',@shipto_telephone=N'124',@StateCode=0,@submitdate=''2008-04-18 14:37:10:140'',@totalamount=1625.62,@totallineitemamount=1500.00,@totaltax=125.62
thanks
Hello
I have a problem with setting relations properly when inserting data using adonet. Already have searched for a solutions, still not finding a mistake...
Here's the sql management studio diagram :
and here goes the code1 DataSet ds = new DataSet();
2
3 SqlDataAdapter myCommand1 = new SqlDataAdapter("select * from SurveyTemplate", myConnection);
4 SqlCommandBuilder cb = new SqlCommandBuilder(myCommand1);
5 myCommand1.FillSchema(ds, SchemaType.Source);
6 DataTable pTable = ds.Tables["Table"];
7 pTable.TableName = "SurveyTemplate";
8 myCommand1.InsertCommand = cb.GetInsertCommand();
9 myCommand1.InsertCommand.Connection = myConnection;
10
11 SqlDataAdapter myCommand2 = new SqlDataAdapter("select * from Question", myConnection);
12 cb = new SqlCommandBuilder(myCommand2);
13 myCommand2.FillSchema(ds, SchemaType.Source);
14 pTable = ds.Tables["Table"];
15 pTable.TableName = "Question";
16 myCommand2.InsertCommand = cb.GetInsertCommand();
17 myCommand2.InsertCommand.Connection = myConnection;
18
19 SqlDataAdapter myCommand3 = new SqlDataAdapter("select * from Possible_Answer", myConnection);
20 cb = new SqlCommandBuilder(myCommand3);
21 myCommand3.FillSchema(ds, SchemaType.Source);
22 pTable = ds.Tables["Table"];
23 pTable.TableName = "Possible_Answer";
24 myCommand3.InsertCommand = cb.GetInsertCommand();
25 myCommand3.InsertCommand.Connection = myConnection;
26
27 ds.Relations.Add(new DataRelation("FK_Question_SurveyTemplate", ds.Tables["SurveyTemplate"].Columns["id"], ds.Tables["Question"].Columns["surveyTemplateID"]));
28 ds.Relations.Add(new DataRelation("FK_Possible_Answer_Question", ds.Tables["Question"].Columns["id"], ds.Tables["Possible_Answer"].Columns["questionID"]));
29
30 DataRow dr = ds.Tables["SurveyTemplate"].NewRow();
31 dr["name"] = o[0];
32 dr["description"] = o[1];
33 dr["active"] = 1;
34 ds.Tables["SurveyTemplate"].Rows.Add(dr);
35
36 DataRow dr1 = ds.Tables["Question"].NewRow();
37 dr1["questionIndex"] = 1;
38 dr1["questionContent"] = "q1";
39 dr1.SetParentRow(dr);
40 ds.Tables["Question"].Rows.Add(dr1);
41
42 DataRow dr2 = ds.Tables["Possible_Answer"].NewRow();
43 dr2["answerIndex"] = 1;
44 dr2["answerContent"] = "a11";
45 dr2.SetParentRow(dr1);
46 ds.Tables["Possible_Answer"].Rows.Add(dr2);
47
48 dr1 = ds.Tables["Question"].NewRow();
49 dr1["questionIndex"] = 2;
50 dr1["questionContent"] = "q2";
51 dr1.SetParentRow(dr);
52 ds.Tables["Question"].Rows.Add(dr1);
53
54 dr2 = ds.Tables["Possible_Answer"].NewRow();
55 dr2["answerIndex"] = 1;
56 dr2["answerContent"] = "a21";
57 dr2.SetParentRow(dr1);
58 ds.Tables["Possible_Answer"].Rows.Add(dr2);
59
60 dr2 = ds.Tables["Possible_Answer"].NewRow();
61 dr2["answerIndex"] = 2;
62 dr2["answerContent"] = "a22";
63 dr2.SetParentRow(dr1);
64 ds.Tables["Possible_Answer"].Rows.Add(dr2);
65
66 myCommand1.Update(ds,"SurveyTemplate");
67 myCommand2.Update(ds, "Question");
68 myCommand3.Update(ds, "Possible_Answer");
69 ds.AcceptChanges();
70
and that causes (at line 67):"The INSERT statement conflicted with the FOREIGN KEY constraint
"FK_Question_SurveyTemplate". The conflict occurred in database
"ankietyzacja", table "dbo.SurveyTemplate", column
'id'.
The statement has been terminated.
at System.Data.Common.DbDataAdapter.UpdatedRowStatusErrors(RowUpdatedEventArgs rowUpdatedEvent, BatchCommandInfo[] batchCommands, Int32 commandCount)
at System.Data.Common.DbDataAdapter.UpdatedRowStatus(RowUpdatedEventArgs rowUpdatedEvent, BatchCommandInfo[] batchCommands, Int32 commandCount)
at System.Data.Common.DbDataAdapter.Update(DataRow[] dataRows, DataTableMapping tableMapping)
at System.Data.Common.DbDataAdapter.UpdateFromDataTable(DataTable dataTable, DataTableMapping tableMapping)
at System.Data.Common.DbDataAdapter.Update(DataSet dataSet, String srcTable)
at AnkietyzacjaWebService.Service1.createSurveyTemplate(Object[] o) in J:\PL\PAI\AnkietyzacjaWebService\AnkietyzacjaWebServicece\Service1.asmx.cs:line 397"
Could You please tell me what am I missing here ?
Thanks a lot.
This problem is being seen on SQL 2005 SP2 + cumulative update 4
I am currently successfully using the output clause of an insert statement to return the identity values for inserted rows into a table variable
I now need to add an "instead of insert" trigger to the table that is the subject of the insert.
As soon as I add the "instead of insert" trigger, the output clause on the insert statement does not return any data - although the insert completes successfully. As a result I am not able to obtain the identities of the inserted rows
Note that @@identity would return the correct value in the test repro below - but this is not a viable option as the table in question will be merge replicated and @@identity will return the identity value of a replication metadata table rather than the identity of the row inserted into my_table
Note also that in the test repro, the "instead of insert" trigger actually does nothing apart from the default insert, but the real world trigger has additional code.
To run the repro below - select each of the sections below in turn and execute them
1) Create the table
2) Create the trigger
3) Do the insert - note that table variable contains a row with column value zero - it should contain the @@identity value
4) Drop the trigger
5) Re-run the insert from 3) - note that table variable is now correctly populated with the @@identity value in the row
I need the behaviour to be correct when the trigger is present
Any thoughts would be much appreciated
aero1
/************************************************
1) - Create the table
************************************************/
CREATE TABLE [dbo].[my_table](
[my_table_id] [bigint] IDENTITY(1,1) NOT NULL,
[forename] [varchar](100) NULL,
[surname] [varchar](50) NULL,
CONSTRAINT [pk_my_table] PRIMARY KEY NONCLUSTERED
(
[my_table_id] ASC
)WITH (PAD_INDEX = OFF, IGNORE_DUP_KEY = OFF, FILLFACTOR = 70) ON [PRIMARY]
)
GO
/************************************************
2) - Create the trigger
************************************************/
CREATE TRIGGER [dbo].[trig_my_table__instead_insert] ON [dbo].[my_table]
INSTEAD OF INSERT
AS
BEGIN
INSERT INTO my_table
(
forename,
surname)
SELECT
forename,
surname
FROM inserted
END
/************************************************
3) - Do the insert
************************************************/
DECLARE @my_insert TABLE( my_table_id bigint )
declare @forename VARCHAR(100)
declare @surname VARCHAR(50)
set @forename = N'john'
set @surname = N'smith'
INSERT INTO my_table (
forename
, surname
)
OUTPUT inserted.my_table_id INTO @my_insert
VALUES( @forename
, @surname
)
select @@identity -- expect this value in @my_insert table
select * from @my_insert -- OK value without trigger - zero with trigger
/************************************************
4) - Drop the trigger
************************************************/
drop trigger [dbo].[trig_my_table__instead_insert]
go
/************************************************
5) - Re-run insert from 3)
************************************************/
-- @my_insert now contains row expected with identity of inserted row
-- i.e. OK
Hi All,
I've looked through the forum hoping I'm not the only one with this issue but alas, I have found nothing so I'm hoping someone out there will give me some assistance.
My problem is the case statement in my Insert Statement. My overall goal is to insert records from one table to another. But I need to be able to assign a specific value to the incoming data and thought the case statement would be the best way of doing it. I must be doing something wrong but I can't seem to see it.
Here is my code:
Insert into myTblA
(TblA_ID,
mycasefield =
case
when mycasefield = 1 then 99861
when mycasefield = 2 then 99862
when mycasefield = 3 then 99863
when mycasefield = 4 then 99864
when mycasefield = 5 then 99865
when mycasefield = 6 then 99866
when mycasefield = 7 then 99867
when mycasefield = 8 then 99868
when mycasefield = 9 then 99855
when mycasefield = 10 then 99839
end,
alt_min,
alt_max,
longitude,
latitude
(
Select MTB.LocationID
MTB.model_ID
MTB.elevation, --alt min
null, --alt max
MTB.longitude, --longitude
MTB.latitude --latitude
from MyTblB MTB
);
The error I'm getting is:
Incorrect syntax near '='.
I have tried various versions of the case statement based on examples I have found but nothing works.
I would greatly appreciate any assistance with this one. I've been smacking my head against the wall for awhile trying to find a solution.
In the below code i want to use select statement for getting customer
address1,customeraddress2,customerphone,customercity,customerstate,customercountry,customerfirstname,customerlastname
from customer table.Rest of the things will be as it is in the following code.How do i do this?
INSERT INTO EMImportListing ("
sql += " CustId,Title,Description,JobCity,JobState,JobPostalCode,JobCountry,URL,Requirements, "
sql += " IsDraft,IsFeatured,IsApproved,"
sql += " Email,OrgName,customerAddress1,customerAddress2,customerCity,customerState,customerPostalCode,
[code]....
trying to get a new database created then running a script to created the tables, relationships, indexes and insert default data. All this I'm making happen during the installation of my Windows application. I'm installing SQL 2012 Express as a prerequisite of my application and then opening a connection to that installed SQL Server using Windows Authentication.
E.g.: Data Source=ComputerNameSQLEXPRESS;Initial Catalog=master;Integrated Security=SSPI; Then I run a query from my code to create the database eg: "CREATE DATABASE [MyDatabaseName]".
From this point I run a script using a Batch file containing "SQLCMD....... Myscriptname.sql". In my script I have my tables being created using "Use [MyDatabaseName] Go CREATE TABLE [dbo].[MyTableName] .....". So question is, should I have [dbo]. as part of my Create Table T-SQL commands? Can I remove "[dbo]."? Who would be the owner of the database? If I can remove the [dbo]., should I also remove dbo. from any query string from within my code?
I'm quite stuck with this:I have an import table called ReferenceMatchingImport which containsdata that has been sucked from a data submission. The contents ofthis table have to be imported into another table ExternalReferencewhich has various foreign keys.This is simple but one of these keys says that the value inExternalReference.CompanyRef must be in the CompanyReference table.Of course if this is an initial import then it will not be so as partof my script I must insert a new row into CompanyReference andpopulate ExternalReference.CompanyRef with the identity column of thistable.I thought a good idea would be to use an SP which inserts a new rowand returns @@Identity as the value to insert. However this doesn'twork as far as I can tell. Is there a approved way to perform thissort of opperation? My code is below.Thanks.ALTER PROCEDURE SP00ReferenceMatchingImportAS/*Just some integrity checking going on here*/INSERT ExternalReference(ExternalSourceRef,AssetGroupRef,CompanyUnitRef,EntityTypeCode,CompanyRef, --this is the unknown ref which is returned by the spExternalReferenceTypeCode,ExternalReferenceCompanyReferenceMapTypeCode,StartDate,EndDate,LastUpdateBy,LastUpdateDate)SELECT rmi.ExternalDataSourcePropertyRef,rmi.AssetGroup,rmi.CompanyUnit,rmi.EntityType,SP01InsertIPDReference rmi.EntityType, --here I'm trying to run thesp so that I can use the return value as the insert value1,1,GETDATE(),GETDATE(),'RefMatch',GETDATE()FROM ReferenceMatchingImport rmiWHERE rmi.ExternalDataSourcePropertyRef NOT IN (SELECT ExternalSourceRefFROM ExternalReference)
View 3 Replies View RelatedI have created a table Table with name as Varchar and id as int. Now i have started inserting the rows like, insert into Table values ('arun',20).Yes i have inserted a row in the table. Now i have got the values " arun's ", 50. insert into Table values('arun's',20) My sqlserver is giving me an error instead of inserting the row. How will you solve this problem?
I was wondering if any SQL people out there know if i can INSERT INTO 2 tables at the same time? I havent found a yes to the question so i thought i would throw it out there and see what everyone has to say. word
View 3 Replies View RelatedI have put together the following code, but am getting a syntax error on the Insert Into statement. Could someone kindly tell me what I am doing wrong? Thanks 1 Protected Sub SubmitButton2_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles SubmitButton2.Click2 authAndSaveToDB()3 End Sub4 Private Sub authAndSaveToDB()5 On Error GoTo errhand6 If connectToDB() Then 'connection to database was successful7 'insert candidate in the database
8 insertCandidate(ddlPositions.Text, txtName.Text, txtBio.Text, conn)9 Response.Redirect("FileUpload.aspx")10
11 Else
12 Response.Write("<font color = red><strong>Database connection failure. Please try again in a few minutes or contact system administrator.</strong></font>")13 End If
14 closeDB() 'end the connection to the database
15 Exit Sub
16 errhand:17 Response.Write("<br>ERROR: " & Err.Description & "<br>")18 End Sub19 Private Sub insertCandidate(ByVal strPositions As String, ByVal strCandidate As String, ByVal strBiography As String, ByVal myconn As OleDb.OleDbConnection)20 Dim cmd As OleDb.OleDbCommand21 Dim strSQL As String
22
23 strSQL = "INSERT INTO Position (Positions,Candidate,Biography) VALUES ('" & _
24 strPositions & "'," & _
25 "'" & strCandidate & "'," & _
26 "'" & strBiography & "')"
27 cmd = New OleDb.OleDbCommand(strSQL, myconn)28 cmd.ExecuteNonQuery()29 End Sub30 End Class
Hi, I am retriving the value time from my database and i have the convert function on it CONVERT (varchar, Time, 8)
When i edit this and try and insert it back to the database i am losing the information. I am not sure how the insert statement shoulld read in order to do this.
Thanks Mike
Hi forum, currently I insert a mobile phone number into colomn OK but what I need to do is add +61 as a prefix.Users provide 055 555 555, I want to store number as +61 55 555 555 (note this also drops the 0) my SQL skills a little lacking so appreciate all good info, cheers P
View 2 Replies View RelatedHi Everyone
I am having difficulties with my first hand coded insert statement. The record inserts BUT the first item VALUE is selected for all the drop down lists ( 3 of them are optional) I have Prerenders on the page to insert a null value at the top of the list. For the dropdown that is mandatory it only enter first item. Thats without specifying type. As soon as I specify type I get - Input string not in correct format - doesn't actually tell me which one!!!!!! All char types match the database.
Here is my insert:
Sub Add_Click(sender as object, e as EventArgs)
Dim conBooks As SqlConnection
Dim strInsert As String
Dim cmdInsert As SqlCommand
conBooks = New SqlConnection( System.Configuration.ConfigurationSettings.AppSettings("conFantasy") )
strInsert = "INSERT INTO dbo.Books (ISBN, BookTitle, AuthorID, AuthorType, author2, author3, Series, VolNo, Synopsis, PubYear, PubDate) VALUES (@ISBN, @BookTitle, @AuthorID, @AuthorType, @author2, @author3, @Series, @VolNo, @Synopsis, @PubYear, @PubDate )"
cmdInsert = New SqlCommand( strInsert, conBooks )
' Add Parameters
cmdInsert.Parameters.Add( "@ISBN", SqlDbType.nvarchar).Value = txtISBN.Text
cmdInsert.Parameters.Add( "@BookTitle", SqlDbType.nvarchar).Value = title.Text
cmdInsert.Parameters.Add( "@AuthorID", SqlDbType.int).Value = AuthorID.SelectedItem.Value
cmdInsert.Parameters.Add( "@AuthorType", SqlDbType.char).Value = AuthorType.SelectedItem.Value
cmdInsert.Parameters.Add( "@author2", SqlDbType.int).Value = author2.SelectedItem.Value
cmdInsert.Parameters.Add( "@author3", SqlDbType.int).Value = Author3.SelectedItem.Value
cmdInsert.Parameters.Add( "@Series", SqlDbType.nvarchar).Value = Series.SelectedItem.Value
cmdInsert.Parameters.Add( "@VolNo", SqlDbType.int).Value = volumeno.Text
cmdInsert.Parameters.Add( "@Synopsis", SqlDbType.ntext).Value = txtSynopsis.Text
cmdInsert.Parameters.Add( "@PubYear", SqlDbType.bigint).Value = pubyear.Text
cmdInsert.Parameters.Add( "@PubDate", SqlDbType.nvarchar).Value = PubDate.Text
conBooks.Open()
cmdInsert.ExecuteNonQuery()
conBooks.Close()
Response.Redirect("/admin/default.aspx")
End Sub
Hi All,
I am trying to insert data into table1 by getting data from table2, table3 and looking whether the data is already not exist in table1.
Here is my code...
insert into table1 (first_name, last_name, user_login, email, organization_name) values (select ru.firstname, ru.lastname, ru.UserID, ru.EmailAddress, ru.BusinessName from table2 ru, table3 wepsUsers where ru.id = wepsUsers.user_id and not exists (select user_login from table1 where user_login = ru.UserID))
When I excute the code, I am getting the following error.....
Server: Msg 156, Level 15, State 1, Line 3Incorrect syntax near the keyword 'select'.Server: Msg 170, Level 15, State 1, Line 7Line 7: Incorrect syntax near ')'.
But, If execute the following code....
select ru.firstname, ru.lastname, ru.UserID, ru.EmailAddress, ru.BusinessName from table2 ru, table3 wepsUsers where ru.id = wepsUsers.user_id and not exists (select user_login from table1 where user_login = ru.UserID).... I am able to see the values.
Can any one shade on my code? and please let me know, where I am doing wrong. I am appreciate your help.
Thanks.
Srinivas.
Hi, Every body,
Is there anyway that we can use insert into statement to insert data into the first row of a table, or initialize the column with the new inserted data.
Thanks in Advance,
I am trying to do an insert in a particular View...one of the field has got an 'Apostrophe'.(Ex: SQl Server's).
When i do this i get an error. the system does not allow me to insert....
is there any way i can do an Insert with that...???
Thanks
How can you insert this statement in a table using Query Analyzer.
(today's date)as single statement.
Thank You,
John
How do I
1.) take two seperate columns and combine the data
2.) take that combined data and populate a third column.
Here is an example of what I've been trying to do:
Insert INTO Table_1 (Column1)
Select Column2 + Column3
From Table_1
I continue to get this error message:
Server: Msg 515, Level 16, State 2, Line 1
Cannot insert the value NULL into column 'Column_2', table 'DB1.dbo.Table_1'; column does not allow nulls. INSERT fails.
The statement has been terminated.
If some one could please give me a general script that could do this I would appreciate it. I'm new to using SQL and I'm a little bit lost.
Thanks.
I need an insert statement that will grab the maximum of TimeGenerated from the Events table and insert it into LastEventTime in the Host Table. But it has to be inserted based on the relationship of SystemNetName.
For Example,
Host Table
--------------------------------------
SystemNetName LastEventTime
Tweety 9/24/2004
Sylvester 9/25/2004
Events Table
----------------------------------------
SystemNetName TimeGenerated
Tweety 9/24/2004
Tweety 8/26/2004
Sylvester 8/21/2004
Sylvester 9/25/2004
Sylvester 7/5/2004
This is what I had so far but didn't work:
Insert into host(LastEventTime)
Select(Max(TimeGenerated) ) from Events Where
Events.SystemNetName = Host.SystemNetName
Any Ideas?
Is is possible to use a Where Clause in a Insert statement in MS SQL? I keep getting a syntax error near 'Where'. Is there something wrong with this?
Insert INTO CPU (CPUNumber, Name, MaxClockSpeed, SystemNetName) Values('CPU2', 'Intel', '2392', 'TWEETY') Where 'CPU2' NOT IN (Select CPUNumber from CPU)
I want to insert into the cpu table as long as what I am inserting is not already in the table.
Desparate.
Thanks,
Laura
Can someone help me parse this oracle insert statement into SQL Server please?
insert into notify_template (subject, body, priority)
values
(
'
Budgeted time exceeded for task [18040]
',
'
Actual Time exceeds Budgeted time for the following task'
|| chr(10) || chr(10) ||
'Task Name : [18040]
Root Program Name : [18049]
Actual Days : [2000000100]
Budgeted Days : [2000000101]
Estimated Time : [2000000102]'
|| chr(10) || chr(10) ||
' The following resource(s) in the above task have exceeded the budgeted time:'
|| chr(10) || chr(10) ||
' [2000000784]'
|| chr(10) || chr(10) ||
'Click here : [12865]
',
2)
hi all
i am writing a trigger that inserts from one table to the next. i have an issue with the table being inserted into have 2 more columns than the one being inserted from. Here is the trigger just in case
CREATE TRIGGER [Insert40801] ON [dbo].[tPA10801]
FOR INSERT
AS
insert into tPA40801
select
intTimesheetKey,
chrTimesheetNumber,
TranID,
intEmployeeKey,
intEmployeeDivKey,
BatchKey,
dtePeriodStartDate,
dtePeriodEndDate,
chrStatus1,
numTotalHrsWorked,
numTotalHrsBilled,
numTotalCosts,
numTotalCharges,
numTotalRecover,
chrSignedID,
dteSignedDate,
chrApprovalID,
dteApprovalDate,
intJobKey,
intPhaseKey,
intTaskKey,
dteDate,
siCstClsificatnDDL,
UpdateCounter,
CompanyID
from tpa10801
now tpa40801 has two extra columns that tpa10801 doesnt. how would i please the sql gods and get the insert statement running? thanks alot
tibor
I need to insert over 600 similar records in a table. The only way I know is to write insert into <table> command 600 times. Is there another way which is easier?
Thanks in advance,
Saurav
my insert statement got no error but when i check my table the values were not inserted actually.. what maybe the problem?
View 12 Replies View Related