I'm updating my local database installation using my netowrk login as
the id under which SQLServer is being update (Administrator on the
operating system and SA role on the database server itself).
Has anyone encountered any problems and what is the work-around?
Hi,I am planning to install sql server 2000 sp4 on my clustered serverrunning in active/passive mode.I plan to stop all sql services using cluster administrator, installthe service pack from the primary node and then reboot all nodes.Are there any missing steps that need to be done or problems thatanyone has come across?ThankLyn
View 3 Replies View RelatedHello!When trying to install SqlServer 2000 Developer (as Administrator) on myWindows XP Professional I get the following message at the point wherethe system asks Local Account or Domain account:The logon account cannot be validated for the SQL server service. Verifythat the user name and password entered are correct. The logon attemptfailed.Anyone an idea what goes wrong here?Thanks for your info.Daniel*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View RelatedIs it possible to install and configure the MSDTC resource in a SQL Server 2000 cluster after SQL is installed and running?
When I recently went through a rebuild of my cluster, I forgot to install the resource before installing SQL Server. Now, if I install and bring online the MSDTC resource the SQL disk groups will not fail over correctly. The SQL Server resource will not come online.
Thanks in advance for any help. I would really like to avoid rebuilding again.
Andy
Hi experts;
I have a problem with unicode character 0x2300
I created this table
create table testunicode (Bez nchar(128))
Insert Data
insert into testunicode (Bez)values('Œ€„¢')
with 2 Unicode characters
Œ€ = 0x2300
„¢ = 0x2122
Selecting the data
select Bez from testunicode
I see
"?„¢"
„¢ = 0x2122 is ok but instead of 0x2300 there is 0x3f
When I modify the insert statement like that ( 8960 = 0x2300 )
insert into testunicode (Bez)values(NCHAR(8960)+'„¢')
and select again voila i see
"Œ€„¢"
Does anyone have an idea?
Thanks
I am trying to 'load' a copy of a SQLServer 2000 database to SQLServer 2005 Express (on another host). The copy was provided by someone else - it came to me as a MDF file only, no LDF file.
I have tried to Attach the database and it fails with a failure to load the LDF. Is there any way to bypass this issue without the LDF or do I have to have that?
The provider of the database says I can create a new database and just point to the MDF as the data source but I can't seem to find a way to do that? I am using SQL Server Management Studio Express.
Thanks!!
I have an app that uses a sqlserver 2000 jdbc driver to connect to a sqlserver 2000.
Is it possible to do a direct replacement of sqlserver 2000 with sqlserver 2005 express just by reconfiguring the app to point to the express? The app would still be using the sqlserver 2000 jdbc driver to try and make the connection.
If that is a possibility, what can be some differences in the configuration? Previously with 2000 the config information I entered is:
server name: "machinename"( or ip). I've also tried "machiname/SQLEXPRESS"
DB name: name of db instance
port: 1433(default)
user and pass.
My attempts so far results in
"java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Error establishing socket."
and
"java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Unable to connect. Invalid URL."
HI, I am having difficulties in installing sp1 for sql server 7.0. Does anyone have similar issues. Any one can enligth me with his/her experience. thanks for your help
Ali
Hi All
I would like to know whether SQLServer can be installed in a raw volume or not..... Is there best practice guide for this. .
Regards,
Vijay
After installing Visual Studio 2005 everything has installed fine EXCEPT SQLSERVER 2005. I remember having had the same problem some moths ago, but can't remember now how to fix it. I deinstalled VS2005 and installed back again, but the result was the same. SQLSERVER failed to install
thanks
we have a client that just upgraded to sp5a and are encountering problems...one stored procedure seems to routinely become corrupted, and does not complete correctly. however, it does not error out, and the only way to tell that it did not complete successfully it to query the data.
the only solution that i have found to this problem is to recreate the procedure. i have tried using sp_recompile to force a recompile at next runtime, and the problem still occurs. i have tried recreating the calling procedure, and recreating procedures it calls, but neither fix the problem.
after recreating the procedure, it continues to run fine for anywhere from 1 hour to 8 hours, and then starts to fail again.
microsoft so far has not been able to give us help in diagnosing this, and i am coming up with nothing in my own investigations.
has anyone seen a problem like this in sp5a?
also, it is occurring on 5 similar dbs that are on the same server...
thanks
carl
Hello Friends at dBForum !!
:confused: I have a strange problem, and I need to know what would be the source of this. I have a laptop computer with the following configuration:
Pentium III
Brand :Toshiba
Speed: 500 Mhz
RAM : 192 MB
Hard Disk :6 GB
Space Available:4 GB
O.S.:Windows 98
The computer works pretty good and run different applications. I was trying to install MS-SQLSERVER 2000 and I checked out the software and hardware requierements for that and everything seems to be fine. The reason that I need it its because of my trips, and its incredible I have a desktop computer with almost the same configuration and runs pretty good.
When you have a problem installing SQL-SERVER 2000 you have a file called cnfgsvr with all the explanation. I got this at hand so you can see better the problem:
Iniciando servicio ...
Conectando con el servidor ...
driver={sql server};server=3110CT;UID=sa;PWD=;database=master
[Microsoft][ODBC SQL Server Driver][Shared Memory]No existe el servidor SQL Server o se ha denegado el acceso al mismo.
[Microsoft][ODBC SQL Server Driver][Shared Memory]ConnectionOpen (Connect()).
driver={sql server};server=3110CT;UID=sa;PWD=;database=master
[Microsoft][ODBC SQL Server Driver][Shared Memory]No existe el servidor SQL Server o se ha denegado el acceso al mismo.
[Microsoft][ODBC SQL Server Driver][Shared Memory]ConnectionOpen (Connect()).
driver={sql server};server=.;UID=sa;PWD=;database=master
[Microsoft][ODBC SQL Server Driver][Named Pipes]No existe el servidor SQL Server o se ha denegado el acceso al mismo.
[Microsoft][ODBC SQL Server Driver][Named Pipes]ConnectionOpen (Connect()).
Error de configuración del servidor SQL Server.
This is what I got after the installation fails: Here is the log sequence, and I got this from a file called sqlstp2000:
14:37:28 CoreCOM
14:37:28 CoreCOMRes1033
14:37:28 CoreCOMResIntl
14:37:28 CoreTool
14:37:28 CoreToolRes1033
14:37:28 CoreToolResOther
14:37:28 DBLibCli
14:37:28 SFExt
14:37:28 SFExtActiveX
14:37:28 SFExtActiveXRes1033
14:37:28 SFExtActiveXResIntl
14:37:28 SFExtRes1033
14:37:28 SFExtResIntl
14:37:28 Trace
14:37:28 TraceRes1033
14:37:28 TraceResOther
14:37:28 MiscCore
14:37:28 MC
14:37:28 MCMC1033
14:37:28 MCMCIntl
14:37:28 MCHelp
14:37:28 SQLMgr
14:37:28 SQLMgrRes1033
14:37:28 SQLMgrResIntl
14:37:28 SvrTool
14:37:28 SvrToolRes1033
14:37:28 SvrToolResIntl
14:37:28 DTSUI
14:37:28 DTSUIRes1033
14:37:28 DTSUIResIntl
14:37:28 MSOlap
14:37:28 MSOlapRes1033
14:37:28 MSOlapResIntl
14:37:28 ATL
14:37:28 ATLwinnt
14:37:28 ATLwin9x
14:37:28 MFC42U
14:37:28 VC
14:37:28 VB
14:37:28 SQLAdHlp
14:37:28 SQLAdHlpRes1033
14:37:28 SQLAdHlpResOther
14:37:28 {E07FDDC8-5A21-11d2-9DAD-00C04F79D434}
14:37:28 {E07FDDBE-5A21-11d2-9DAD-00C04F79D434}
14:37:28 {E07FDDC7-5A21-11d2-9DAD-00C04F79D434}
14:37:28 {E07FDDC0-5A21-11d2-9DAD-00C04F79D434}
14:37:28 {E07FDDBF-5A21-11d2-9DAD-00C04F79D434}
14:37:28 End Action LogSelectedComponents
14:37:28 Begin Action InstallPkgs:
14:37:28 Begin Action: Locked Connectivity Files Check
14:37:29 ConnectivityLocked returned: 0
14:37:29 The operation completed successfully.
14:37:29 End Action: Locked Connectivity Files Check
14:37:29 El programa de instalación está instalando Microsoft Data Access Components (MDAC)...
14:37:29 E:X86Othersqlredis.exe /q:a /C:"setupre.exe WARN=1 -s -SMS"
14:38:10 ExitCode: 0
14:38:10 El programa de instalación está instalando Microsoft Management Console (MMC) ...
14:38:10 E:X86Otherinstmmc.exe /Q
14:38:36 Process Exit Code: (0)
14:38:36 Se está instalando el Coordinador de transacciones distribuidas de Microsoft (MSDTC)...
14:38:36 E:X86Otherdtcsetup.exe /q:a /r:n
14:38:53 Process Exit Code: (0)
14:38:53 /Q:A /T:C:WINDOWSTEMPixp001.tmp
14:38:53 El programa de instalación está instalando la Ayuda HTML...
14:38:55 HTML Help installer exit code: 0
14:39:18 End Action InstallPkgs
14:39:18 Begin Action MoveFileData:
14:39:18 Enabled SELFREGISTERBATCH
14:39:18 Enabled CORECOMPONENTHANDLING
14:42:27 ComponentMoveData exit code: -117
14:42:27 ComponentMoveData: -117
14:42:51 No se puede leer el archivo especificado. Puede ser a causa de una conexión de red de bajo rendimiento. Corrija el problema y reinicie el programa de instalación. ( This message says that the computer can not read the specified file or its a problem related to a network connection of low performance. According to the message here shown, I have to fix the problem and reinstall. ) I did it, even I deleted the entries related to this on the windows registry and after restarting the problem stills...
Archivo: E:X86SETUP....Install
eplmerg.sql
14:42:51 Begin Action: MoveFileDataSpecial
14:42:52 End Action: MoveFileDataSpecial
14:42:52 Action CleanUpInstall:
14:42:52 StatsGenerate returned: 2
14:42:52 StatsGenerate (0x0,0x1,0xf0000,0x0,1034,303,0x0,0x1,0,0,0
14:42:52 StatsGenerate -1,Alessandro)
14:42:52 Installation Failed.
On the other hand, I tried to install MS-SQLSERVER 7.0 ( you know if I can get do it with MS-SQLSERVER 2000 ) and this is what I got :
2005-02-17 13:08:26.77 kernel Microsoft SQL Server 7.00 - 7.00.623 (Intel X86)
Nov 27 1998 22:20:07
Copyright (c) 1988-1998 Microsoft Corporation
Desktop Edition on Windows 4.10 (Build 2222: A )
2005-02-17 13:08:26.84 kernel Copyright 1987-1998 Microsoft Corporation.
2005-02-17 13:08:26.84 kernel Reservados todos los derechos.
2005-02-17 13:08:26.84 kernel Registrando los mensajes de SQL Server en el archivo 'C:MSSQL7logERRORLOG'.
2005-02-17 13:08:27.00 kernel initconfig: número de conexiones de usuario limitado a 32767.
2005-02-17 13:08:27.01 kernel SQL Server se iniciará con clase de prioridad 'normal'( se detectó 1 CPU).
2005-02-17 13:08:27.21 kernel User Mode Scheduler configured for thread processing
2005-02-17 13:08:28.61 server Directory Size: 8087
2005-02-17 13:08:28.68 spid1 Using dynamic lock allocation. [500] Lock Blocks, [1000] Lock Owner Blocks
2005-02-17 13:08:28.74 spid1 failed to get sqlservr image range
2005-02-17 13:08:28.78 spid1 Advertencia ******************
2005-02-17 13:08:28.79 spid1 SQL Server iniciado en modo de usuario único. Se permiten las actualizaciones en los catálogos del sistema.
2005-02-17 13:08:28.79 spid1 Advertencia ******************
2005-02-17 13:08:28.79 spid1 Recovering only master database
2005-02-17 13:08:28.85 spid1 Iniciando la base de datos 'master'.
2005-02-17 13:08:28.85 spid1 Opening file C:MSSQL7datamaster.mdf.
2005-02-17 13:08:28.97 spid1 Opening file C:MSSQL7datamastlog.ldf.
2005-02-17 13:08:29.06 spid1 Cargando el método de intercalación Unicode de SQL Server.
2005-02-17 13:08:29.16 spid1 Cargando el orden y conjunto de caracteres no Unicode de SQL Server.
2005-02-17 13:08:29.41 spid1 4 transacciones confirmadas en la base de datos 'master' (1).
2005-02-17 13:08:29.41 spid1 0 transacciones deshechas en la base de datos 'master' (1).
2005-02-17 13:08:29.65 spid1 El servidor no tiene nombre.
2005-02-17 13:08:29.65 kernel Se utiliza 'SQLEVN70.DLL' versión '7.00.623'.
2005-02-17 13:08:29.72 kernel Se utiliza 'OPENDS60.DLL' versión '7.00.00.0623'.
2005-02-17 13:08:29.83 ods Utilizando 'SSMSSH70.DLL' versión '7.0.623' para escuchar en ''.
2005-02-17 13:08:29.89 ods Utilizando 'SSMSSO70.DLL' versión '7.0.623' para escuchar en '1433'.
2005-02-17 13:08:30.09 ods Utilizando 'SSMSRP70.DLL' versión '7.0.623' para escuchar en '3110CT'.
2005-02-17 13:08:31.11 spid1 El método de intercalación Unicode de SQL Server es:
2005-02-17 13:08:31.11 spid1 'English' (Id. = 1033).
2005-02-17 13:08:31.11 spid1 estilo de comparación = 196609.
2005-02-17 13:08:31.11 spid1 El orden no Unicode de SQL Server es:
2005-02-17 13:08:31.11 spid1 'nocase_iso' (Id. = 52).
2005-02-17 13:08:31.11 spid1 El juego de caracteres no Unicode de SQL Server es:
2005-02-17 13:08:31.11 spid1 'iso_1' (Id. = 1).
2005-02-17 13:08:31.19 kernel Warning: override, autoexec procedures skipped.
2005-02-17 13:10:23.67 kernel SQL Server terminará debido a una petición de 'detención' del Administrador de control de servicios.
Accordiing to the message shown in the bottom line, we may see its like the installation were stopped because of a request of the Control Service Manager. I never stop the installation or something like that but I dont have a clue why or where is the problem here.
My desktop computer is standalone and works without problems. Of course I read that if you have PWS ( Personal Web Server ) running you may need to stop that first, and then proceed. I did it and it never worked.
If you have any suggestion about it, this would be greatly appreciated.
Thank you so much,
Cordially,
Alessandro Barbieri - Peru
Hi Friends,
Can some please let me know the differences between sqlserver 2000 and sqlserver 7.0
Hello,
I am totally confused by what account I should be running my sql server database and my business layer service as.
I take it that when installing sqlserver and my service that I should be logged in as administrator.
Should I be using "Local Service", "Local System" or "Network Service" to run these processes as?
Summary of my business layer service
* Clients connect to this service on a tcp/ip port
* It accesses the file system
* it connects to the database
Thanks,
JP
Thanks in advance. What is maximum SQL Server database (*.mdf) file size with SQL Server 2000 as part of Microsoft Small Business Server 2000? (Database files were limited to 10 GB in SBS 4.5 with SQLServer 7.0... has this changed?).
View 1 Replies View RelatedHi, I wanted to see what are all the users in a windows nt group that has a group access to sql server 2000. I have a windows 2000 group access to sqlserver 2000 as "xxxsomegroup". How can I list all users that belongs to this windows 200 group? is there any stored procedure to find out this?
any information could be greatly appreciated.
thanks
I recently had to reinstall a new instance of SQLServer 2000, but was unable to use the previous server name. As a result, my Access2000 front end is not happy with it's linked tables. I can't seem to find anyplace within Access to universally change the address of the SQLServer used as the back-end for all linked tables.
When I do try to access the linked tables through Access, I get an error, and the option to change the server location. When I try to type-in the new SQLServer location, there is an attempt to reconnect to SQLServer, but a whole lot of errors are generated, and none of the data is transferred into the Access table.
I really don't want to have to re-do my Access front end, so it seems it would be easiest to somehow reinstall SQLServer to have the same server location it used to. Is there a good way to completely erase all traces of SQLServer so that I can have better luck reinstalling it to the same location it used to be in? Just using the uninstall program from SQLServer doesn't seem to be cutting it.
Thanks!
When I try to make a connection to an Access .mdb I get the following error:
"Unable to open application. The workgroup information file is missing or opened exclusively by another user"
Yet, I am able to open the file through Access and have necessary permissions and I know no one else has it opened. The mdb is password protected and I have provided the correct login information in the DTS connection.
Hi guys,
I have a performance related question about the DTS package in sqlserver 2000 which i have developed
We have developed a DTS package which will migrate a view 'ATTRITION' from Sqlserver 2000 to an Oracle database.The design of the package is as follows
First step: It checks for the existance of the table 'ATTRITION' in oracle database, if table 'ATTRITION' is not there it will create a table called 'ATTRITION' in the oracle db.If the table 'ATTRITION' is already present in the oracle db,then the table is truncated.
Second step: The view 'ATTRITION' is migrated to Oracle table 'ATTRITION'.
For the migration, i have used a connection object which connects to sqlserver 2000 and for oracle connection i have used another connection object 'Microsoft ODBC driver for oracle' and i have joined both the connection objects with 'Transform data task' task which maps one to one from sqlserver 2000 where view 'ATTRITION' exists with oracle database where Table 'ATTRITION' exists.
Roughly i have around 65000 rows in 'ATTRITION' view of sqlserver 2000 which needs to be migrated.When im running the package on my system it takes around 4 minutes to migrate all the rows but when im running it on the server it takes a lot lot of time more than 1 hour.
The view definition im using has more than 10 tables joined together.But if its a problem of query used in the view,and if i run the view seperately it quickly displays the data hardly takes 1 minute. and even if i run the package on my local pc it doenst take much time.Now my confusion is why its taking soo much time on server.If i create a indexed view then will it solve my problem.Please suggest...
Thanks in advance
REgards
Arvind L
I new to SQL Database, I have small server running SQL 2000, my company bought new server netfinity with very powerful processor, the new server have two disk mirror use for the operating system, and have RAID 5 array I will install SQL 2000 in. My question is should I install the SQL in one big volume or should I break the RAID to small Volume and install SQL across the Volumes.
I also want to run SMS 2.0 in the same server, is that ok?
Thanks in advance
I am getting an error message when verifying the environment for the install (of CRM 3.0) that the instance name must be the same name as the computer name. Perhaps someone could explain how to accomplish this seeming easy task.
View 2 Replies View Relatedhi friends, i want to convert the Xml file
from D: emp est.xml to Master Database in sql server2000 using Coding
in c#. Please do needful-subashini
biju writes "hii...
i need 2 study sql server 2000 alone...4 that i need tutorials...pls proivide the required details
with regds"
Hi.. ASP I want to install SQL SERVER 2000 on XP..But is it only support for client version.Is there any Service Pack for XP about SQL SERVER 2000 for server version. I have already install XpServicePack2 but problem is still remain. Thanks & RegardsRavinder Sharma
View 1 Replies View Relatedhi, I have tried to install sql server 2000 in win 98. I was not able to do so. I used to install sql server 7.0 in win 98.
The Question, is is the new version (2000) does not allow to install in win 98.
thanks
Ali
:p Hi,
I've MS SQL Server 6.5 installed in my Windows 2000 machine. Is it possible to install MS SQL Server 2000 personal or standard edition in the same machine without upgrading or removing the old SQL Server 6,5 ?
Thanks in advance.
hi
can i install SQL 2005 in a window XP?, I have tried with no avail, if not whats the way out?
HiI am trying to find out best practices for SQL Server 2000 installsfor corporate servers. We currently have someone doing it 'in theirspare time!' (I kid you not). When installing SQL server 2000 out ofthe box on a freshly formatted machine, I would like to get somefeedback on the following:1) I believe the 'sa' account should be removed at earliestopportunity, after install.2) Should there be any processes running under the 'sa' account is themachine was correctly configured to use a domain account principle? Iwas under the impression that this was not the case?Any links to information on best practices would be appreciated.Regards,Mitch
View 1 Replies View Related
While upgrading Sql 2000 Sp3 thge installer is starting to install the service pack. But after running the scripts he gives a very strange error.
error running: 80sp4-tools.sql (1).
after searching and living on google for 3 days for information about this error, I'am no
really desperate.
I hope someone help me or tell me more about this error.
thanks so far
I installed VS 2005 which automatically installed SQL 2005. I wanted to also install SQL 2000. I tried to install SQL 2000 (Client tools) after 2005 was installed and there were errors. I then uninstalled SQL 2005 and tried to install SQL 2000 (client tools). This is on my local machine not a server.
I am getting the following error:
"A connection could not be established to XXXXSQLEXPRESS. Reason: SQL Server does not exist or access denied."
Is there something that I am missing?
Thanks in advance.
hey ppl, if there is any1 that can help me here i would apreciateerror line(probably)Comando = New SqlCommand("INSERT INTO Table1(name) VALUES('a')", Conexao)on Table1 i have those fieldsid(int, identity) e name(text)but when i execute this code i get the following error:Error on the XML processing: no element found(ps. the error wasnt on english so i made a poor translation but i think u can have a general ideia)(the error message untranslated)Erro no processamento de XML: nenhum elemento encontradoPosição: http://localhost/teste.aspxNúmero da linha 1, Coluna 1:anyway, the wierd part is that on the sqlserver the data is insertted normally.. so.. what is that error??any1 pls help me! im going nuts (ps. im still noob on asp.net/sqlserver so please be gentle ^.^)(ps2. sorry for the crap english but it isnt my native language :) )
View 3 Replies View RelatedMy company has a site license with Microsoft to purchase software. For
SQLServer 2000 they receive a 'MASTER' CD of which they 'burn' copies
for the departments that request it. I requested the manuals that
come with the product and was told that the manuals are now on the 'CD'.
I want to purchase the 'microsoft' manuals that come with the product.
Has anyone ordered sqlserver 2000 and received manuals?
thanks in advance.
Transact-sql debugger comes with sqlserver 2000. I checked my server and
all the dll;s are loaded correctly, sqldbreg process is running. I also configured the client correctly.
How do I invoke this debugger? Which settings you change to get to the toolbar for the debugger in query anayl..