IO Completion Listener
Mar 25, 2008
I have had an underwhelming amount of success hunting down the source
of this error and am hoping that someone here may have some insight.
Error logged in the event log:
Source: MSSQLSERVER
Category: (2)
EVENT ID: 17887
Description: IO Completion Listener (0x754) Worker 0x00FEC0E8 appears
to be non-yielding on Node 1. Approx CPU Used: kernel 0 ms, user 0 ms,
Interval: 15187.
Immediately followed by 100% CPU utilization. The server remains ping-
able and I can telnet to the SQL port, but it is otherwise effectively
unresponsive (queries timeout, RDP times out, etc.). This is also
logged in the SQL error log:
2008-03-19 15:52:37.80 Server Using 'dbghelp.dll' version '4.0.5'
2008-03-19 15:52:46.80 Server **Dump thread - spid = 0, PSS =
0x00000000, EC = 0x00000000
2008-03-19 15:52:46.80 Server ***Stack Dump being sent to D:
Microsoft SQL ServerMSSQL.3MSSQLLOGSQLDump0004.txt
2008-03-19 15:52:46.80 Server *
************************************************** *****************************
2008-03-19 15:52:46.80 Server *
2008-03-19 15:52:46.80 Server * BEGIN STACK DUMP:
2008-03-19 15:52:46.80 Server * 03/19/08 15:52:46 spid 0
2008-03-19 15:52:46.80 Server *
2008-03-19 15:52:46.80 Server * Non-yielding IOCP Listener
2008-03-19 15:52:46.80 Server *
2008-03-19 15:52:46.80 Server *
************************************************** *****************************
2008-03-19 15:52:46.80 Server *
-------------------------------------------------------------------------------
2008-03-19 15:52:46.80 Server * Short Stack Dump
2008-03-19 15:58:13.09 Server Stack Signature for the dump is
0x00000006
2008-03-19 16:03:40.94 Server IO Completion Listener (0x730)
Worker 0x00A060E8 appears to be non-yielding on Node 0. Approx CPU
Used: kernel 0 ms, user 0 ms, Interval: 15187.
2008-03-19 16:06:10.47 Server Timeout waiting for external dump
process 6016.
2008-03-19 16:06:10.47 Server IO Completion Listener (0x754)
Worker 0x00FEC0E8 appears to be non-yielding on Node 1. Approx CPU
Used: kernel 0 ms, user 0 ms, Interval: 15187.
2008-03-19 16:17:34.51 Server IO Completion Listener (0x754)
Worker 0x00FEC0E8 appears to be non-yielding on Node 1. Approx CPU
Used: kernel 0 ms, user 0 ms, Interval: 15187.
The server is Windows 2003 SP2 (32bit), dual dual-core AMD opteron
processors, 8GB RAM, RAID 10. /3GB and /PAE are enabled in boot.ini.
"Lock pages in memory" has been granted to the account SQL runs as.
SQL Server is 2005 Standard Edition SP1 (32bit). "Use AWE to allocate
memory" is enabled. Min and max memory are set to 5GB.
If there is any other info you think may be helpful in
troubleshooting, please let me know. Any insight you've had into this
or similar problem would be appreciated. Thanks in advance.
View 1 Replies
ADVERTISEMENT
Aug 3, 2006
We are using SQL Server 2005 (not on SP1), and keep getting the following message in the SQL Server log:
IO Completion Listener (0x15e8) Worker 0x00B7E0E8 appears to be non-yielding on Node 0. Approx CPU Used: kernel 0 ms, user 0 ms, Interval: 35092.
After receiving this message, the server slows down considerably and we receive numerous messages saying:
SQL Server has encountered 61 occurrence(s) of I/O requests taking longer than 15 seconds to complete on file [xxxxx.MDF] in database [xxxx] (22). The OS file handle is 0x00000CDC. The offset of the latest long I/O is: 0x000000fa21a000
I have not been able to find any documentation or explanation of what the IO Completion Listener message is about or how to correct whatever problem is causing it.
Any help would be greatly appreciated!
View 8 Replies
View Related
Oct 4, 2007
I am new to Service Broker and Query Notification. I've used Books Online and the other help files to successfully create a class to subscribe and listen for mods to a table on a SqlServer 2005 (SP1 applied) server. My prototype worked exactly as expected.
However, when I put my code into production, the listener was calling my NotifyEvent() callback repeatedly, and without any changes being made to the table! Of course, I'd tested with a simple two column table and implemented with a more complex multi-column one. After some experimentation I discovered that the problem occured when the SELECT statement refrenced a "blob" column.
That is, the CREATE TABLE command included a column:
[Data] [varbinary] (max) NULL
and the SELECT statement looked like:
private const string _select = "SELECT [Role_s], [User_s], [DataType], [Project_s], [DataName], [tag], [Data_s], [ScopeType], [ScopeOwner], [Data1], [Data2], [Data3], [Data4], [IsProject], [Data] FROM [ovs].[OVS_AppData_tbl] WHERE DataType='SchedTask'";
SqlServer called my NotifyEvent() continuously. If I removed the [Data] column from the select, then the code worked as I had tested. I also tried this on another table (fewer columns) that also had a [Data] defined similarly, and again the continuous notifications came. I've got a workaround because I also calculate a hash on the [Data] column, and I can "watch" the hash instead of the underlying [Data].
Oh, when I ask SSMS to script the table with the [Data] column it gives me:
[Data] [image] NULL
This may (or may) be relevant (vs. varbinary).
View 1 Replies
View Related
May 18, 2006
HiI am very new to SqlServer. I want to my java application, using JDBC,to connect to the SQLServer on port 1433 (Running on Windows NT). Howdo I configure it? I am using 2000 version of SQL Server.Thank you
View 1 Replies
View Related
May 30, 2015
why my listener has two dns entries? Shouldn't it only have the active node's address? I have the cluster RegisterAllProvidersIP set to 0. We have two synchronous local sql 2012 servers on windows 2012 r2 and one remote (different subnet) asynchronous node. Is it safe to manually delete the dns record that's pointing to our remote listener? Why did it add both of them?
View 7 Replies
View Related
Mar 28, 2004
Hi,
I have Oracle 9i. Oracle listener is aborting by itself after every few minutes giving TNSLSNR.exe failed. While listener is running I can do all the activity on the database.
Please let me know if there is any solution.
Thanks in Advance.
Pushpam
View 1 Replies
View Related
Jul 3, 2014
How can one enabledisable Availability Group listener? I know AG listener can be deleted and added but didnt find anything to disable or enable that.
View 1 Replies
View Related
Jul 3, 2015
I've started working at an organization that has a sql 2005 cluster with a named instances on it, lets call it Instance1. What they done is to create a dns alias for servername that is the same as the instance name, so when you connect to the sql server you connect "Instance1Instance1".
We want to move to SQL 2014 cluster with AlwaysOn Availability Groups doing the HA/DR, the question is if I create a listener name called "Listener1" is there a way to using DNS or anything else to point "Instance1Instance1" to "Listener1"
View 1 Replies
View Related
May 27, 2015
Is it possible to password protect the listener for SQL Server - similar to Oracle?
View 2 Replies
View Related
May 20, 2015
I have setup two node SQL 2012 Always ON cluster with file share witness. I have configured two networks, one for heartbeat and second for public.My question is do I need a third network/ subnet for AG Listener? Which network does the SQL user databases in the AG group use to replicate between the replica servers?When I do the SQL backups, do I need to backup primary and secondary replicas or just backup the databases in the secondary replica?
View 4 Replies
View Related
Jun 14, 2007
I have a package that has 4 Script Tasks that are placed sequentially.
I have Task1--> Task2-->Task3-->Task4
The arrows between them are OnCompletion Arrows as opposed to the Standard OnSuccess arrows.Even if Task2 failed, it would still execute 3 and 4
the catch is that i want it such that when i run the first time and task 2 fails, then all the tasks except task2 should run which is fine, but when i rerun it. I want it such that it realises that task 2 had failed earlier, so it runs just task2.... if both 2 and 4 had failed then it should just run 2 and 4
i tired to implement it with check points, but the problemn is that if it fails at task2 it stops at task2 and does not continue to execute tasks 3 &4... when u rerun it starts at 2 but like i said i would like 3 & 4 to have completed the previous run...
Any suggestions would be helpful
Thanks for any help in advance..
smathew
View 6 Replies
View Related
May 6, 2014
I have an issue when connecting with application Intent=readonly when using Listener name. I can connect to the read only secondary with application Intent=readonly if I use the server name. It gives a host does not exist error when using listener. This happens only if I am using the application Intent keyword. I can connect for normal readwrite operation using listener name.
View 3 Replies
View Related
Jun 25, 2014
In our environment applications are using a DNS name which points to the physical server ip address. Now we are planning to move to 2014. We are planning to have servers in different subnets so we will be having two ip adresses for listener. How we can point the DNS to the listener ips? If failover happens can the DNS point to the exact ip address of the listener where it's primary node?
View 1 Replies
View Related
Sep 10, 2014
I have set up a couple of servers in a SQL 2012 AlwaysOn Availability Group (non FCI). I have also configured a Listener which enables SQL clients to connect to the server currently servicing the database, as expected.
I would also like non SQL clients to be able to connect to the server currently hosting the database so that they can run scripts sitting in a share. I don't have a shared disk so just have a directory share on each server with the same scripts in each directory.
I am able to ping and RDP to the listener IP address/name and end up on the correct server but am unable to connect to the share ListenerNameShare. Is that actually supported? If it is, any thoughts on what I need to do to get it going. If it isn't what other options do I have?
View 0 Replies
View Related
Oct 26, 2014
So I have Availability groups configured as well as the Availability Group Listener, what If I want to change the port that the listener is listening on, do I need to reboot the server or is it dynamic across the board ?
View 5 Replies
View Related
Jun 11, 2015
I am trying to setup an AG on a cluster, I was able to define where I want my replica, but I need to setup the ip for the listener of that one
When I am adding the Ip at the listener I am getting the following message:
The Windows Server Failover Clustering (WSFC) resource control API returned error code 5057. The WSFC service may not be running or may not be accessible in its current state, or the specified arguments are invalid. For information about this error code, see "System Error Codes" in the Windows Development documentation.
The attempt to create the network name and IP address for the listener failed. The WSFC service may not be running or may be inaccessible in its current state, or the values provided for the network name and IP address may be incorrect. Check the state of the WSFC cluster and validate the network name and IP address with the network administrator. (Microsoft SQL Server, Error: 41009)
Browsing around I found this guide: [URL] ......
And I make sure that the cluster has permissions to "Read all properties", "Create Computer Objects", even to "Create all child" permissions
I also added those permissions to the account that starts sql at that cluster and I am logged as that and I am still getting the error....
View 4 Replies
View Related
Aug 14, 2015
After manual AG fail-over from primary to secondary the application is not able to connect the listener name for atleast for 5 - 10 mins
The telnet fails during this time from app server, the listener ip is on muti-subnet.
At the same when i try to connect it from SSMS from a remote machine it works fine.
View 2 Replies
View Related
Sep 1, 2015
We have a server A and a server B setup with SQL2014 High Availability - working fine.
I need to add an additional listener to our new DR site (SQLNODECOLO).
What is the best way to do this without impacting production?
Can I just go to server A and add the new listener server here (SQLNODECOLO):
View 4 Replies
View Related
Jun 23, 2008
Hi, all,
I am looking for a way to programatically identify a file is completely uploaded to the ftp site, so the download/copy could start.
Currently, the process we have occassional run into the problem of downloading partial file becauseour partner has not finished uploading.
Thanks!
View 3 Replies
View Related
Apr 2, 2007
Hi All,I have a DTS package that runs calling a few stored procedures and anactiveX module. The package does some data cleanup and load. It takesan hour to complete. I have emails sent at the beginning and end ofthe package execution along with error notifications if any of thestep fails.The issue is that, the DTS runs successfully. I ran the package fromthe server and it completes. If I schedule it, it has been running forover a few months without any issues. One fine day hell broke looseand it started to give an attitude!!When the job is invoked automatically on the scheduled time, it runsthe package. Does what its supposed to do including sending out thefinal email. but is not finishing the job. The job says its stillexecuting but the final step has completed. I have tried logging thepackage, and it says completed the last step.. But the JOB Log hasn'twritten anything to the log file.. (Job Log is where I am logging thestep where I am calling the DTS).Has anyone have any idea what this issue is? I am at a dead end andhave no clue why this is happening. I am thinking of changing thewhole process but before that I want to try posting this.Any ideas, suggestions will be much appreciated. Please feel free tolet me know if there is any additional information you need in orderto troubleshoot this issue.Thanks in advance..Aravin.
View 2 Replies
View Related
Feb 14, 2007
I have three sequence containers setup to run in parallel. I have a final step that parses the log file and displays results, and I want to this to occur when all three containers have completed, success or failure. I therefore have a constraint from each container that feeds into my final step, and all three constraint types are set to "completion".
When I run the package and one of the tasks within a container fails (and fails its parent, but not the package) the final step is not executed.
If I take off all the constraints except one, the final step is executed as expected.
I am using checkpointing if that has any impact. Disabling it makes no difference.
Any thoughts/alternatives I might try?
thanks
View 4 Replies
View Related
Jun 25, 2007
I'm not entirely sure this is the place for it but I need to implement an automatic text completion function.
I'd like to know if there is something, such as a built-in function, that could help me.
The best idea I have is to create some sort of node tree and work with that but there has to be a better way.
I need to do it in C# or in MS SQL. Any kind of help is much appreciated!
View 5 Replies
View Related
Dec 11, 2006
Is there a way (during the Control Flow) to force a package to complete successfully when a specific condition is met?
Here is what I'm trying to do:
A package will be scheduled to execute once a day
The first thing it does is downloads Excel files from an FTP site.
If there are no files to download, I don't want the package to fail, I simply want the package to stop (preventing the subsequent Data Flow tasks from executing), returning a successful completion.
The reason, I need a successful completion is because I plan to have MOM monitor the Windows event logs, notifying us of any errors that this package logs.
View 1 Replies
View Related
Oct 20, 2007
Hi,
We are using Shared Schedule to trigger reports at a particular time. We are invoking the SQL Job associated with the shared schedule. How to identify when the shared schedule gets completed i.e. all the associated reports with the shared schedule are generated. We need to trigger other external processes once all the reports are generated. Kindly help me in this.
Subash
View 3 Replies
View Related
May 3, 2013
When I fail an availability group between subnets, I am finding that the DNS entry in DNS is staying. So what happens is the Availablity Group listener has 2 records in DNS, one for each IP. This causes the App to timeout at times, since DNS will return either of the two IP's.
View 9 Replies
View Related
Feb 25, 2014
How to find when (date/time) a database was last removed from AlwaysOn Listener?
Is there any query (DMV) to find the details easily?
View 1 Replies
View Related
May 6, 2014
I have MasterDataServices installed on a server and the database is in an AlwaysOn Availability Group.The MDM front end currently is set up incorrectly and is referencing NodeA (primary node) for its database.I want to fix this but im unsure if i should:
-point the MDM front end to the cluster name, so it wont matter what server the databsae is on?
-create an Availability Group Listner, which would also decoupple the database referenced from a particular server.
View 5 Replies
View Related
Jul 27, 2015
Do I need to rebuild my indexes on my High Availability listeners?
When I do a full index rebuild on my primary DB's. Does rebuilding also send the rebuild to the listener(s)?
View 1 Replies
View Related
Jul 28, 2015
I need to check connectivity to AG listener remotely and log that to a table/file. What is the best way to do that? Powershell?
View 4 Replies
View Related
Jun 22, 2015
I am not able to connect listener after manual failover.
(This is test environment)
Server1,Server3 -> Both synchronous (Within Same data center)
Server 3 -> Async (At DR location) -Forced Failover
Test1:
Failover Server1 to Server2 --> Able to connect Listener
Failover Server2 to Server1--> Able to connect Listener.
Failover Server1 to Server3--> Able to connect Listener.
Failover Server3 to Server1 or 2 --> Unable to connect Listener. Unable to ping Listener.
Failover Server 1or2 to Server3--> Able to connect Listener.
I am using below sub-nets:
10.11.192.0/22 10.11.192.130
10.12.192.0/22 10.12.192.140
View 3 Replies
View Related
May 27, 2015
In our(my company) current design we want to switch from failover clustering to Always On as high availibility solution.
I am currently testing the availiblity Group Listener function and have two questions regarding this.
First of all, is it possible to connect to a a listener by just using its "name" instead of "name,port", it is for our users very inconvenient to start using ports. If this is possible, where can I find information on how to configure this?
Second, is it possible to use the Availiblity Group Listener as loadbalancer or in combination with a loadbalancer to split the users over two or more nodes?*note we don't use azure.
View 4 Replies
View Related
Sep 16, 2015
Assuming all windows servers belonging to the WSFC are on the same subnet, will the AG listener become a single failure point in system if all Application servers connect to the AG through the listener? If the answer is yes, what are the options to resolve this issue?
View 3 Replies
View Related
Jun 22, 2015
We are trying to build HA and DR environment, combining AG and FCI. So we have 3 servers added to a cluster, 2 of them sharing the same storage and working as ACTIVE-PASSIVE cluster instance. The other server has a stand alone instance with its local storage, with the same drivers letters as the cluster instance.
Between the Active FCI and the Stand Alone, we set up an Availability Group. They are running fine, except by the listener. When the stand alone instance owns the Primary Replica, I am able to access the SQL Server instance by the listener, but when the Primary Replica is owned by the FCI, I can't reach the database by the listener (name or IP).
I've opened the same ports in both servers, it hasn't worked though.
View 14 Replies
View Related
