Identify A Process Which Locked Other Process
Oct 11, 2007
Hello,
I have had a full lock on my sql server and I have a few logs to found the origin of the lock.
I know the process at the head of the lock is the 55 process.
Here are the information I have on this process:
Spid 55 55
ecid 5 5
Ecid 0 0
ObjId 0 1784601646
IndId 0 0
Type DB PAG
Resource 1:1976242
Mode S IS
Status TransID GRANT GRANT
TransID 0 16980
TransUOW 00000000-0000-0000-0000-000000000000
00000000-0000-0000-0000-000000000000
lastwaittype PAGEIOLATCH_SH
CMD AWAITING COMMAND
Physycal id 1059
Login time 2007-07-05 04:29:53.873
nat address DFF06EBF974D
Wait type 0x0046
HostName .
BlkBy .
DBName grpprddb
CPUTime 54331
DiskIO 1059
ProgramName
Would someone know a way to identify the origin of the process 55?
I have already tried to execute the following request:
select * from SYSOBJECTS
where id=1784601646
But I have had no returns.
Regards,
Renaud
View 3 Replies
ADVERTISEMENT
Aug 17, 1999
Hi,
I've started 2 dbcc processes using SQL Scheduler overnight. and I've got
one is flagged rollback and the other is still running, they are blocked
together. I've tried to kill them using kill <spid> without success.
How can I delete this processes ? Shall I shutdown the server ?
Thanks
Herve
View 1 Replies
View Related
Mar 15, 2006
I am writing a package to process perfmon logs. The issue I have come across is that the perfmon process holds onto the log file and SSIS fails because it wants to exclusive read access. Is there any way of getting SSIS to not take an exclusive read on the file.
I can read the file in notepad fine but not SSIS.
View 1 Replies
View Related
Jun 29, 2006
Anyone seen this SSIS error when importing data? I have a 64bit quad processor with 8gb and am importing from Oracle 9 using 32bit DTExec.exe from the command line.
OnInformation,Myserver,MyDomainSQLAdmin,J001OracleDimExtract,{CEB7F874-7488-4DB2-87B9-28FC26E1EF9F},{1221B6EB-D90A-466E-9444-BA05DBC6AFD8},6/29/2006 10:58:08 AM,6/29/2006 10:58:08 AM,1074036748,0x,The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
Thanks
View 5 Replies
View Related
May 7, 2015
Imagine I set a begin transaction on table a and updating a row and not committed and not roll backed--first connection
From second connection I am selecting same table (obviously it wait until first connection commits/rollback based on my transaction level: my isolation level is read committed).
1. How do I know second connection is to waiting to first connection to complete.
2. If I want to select rows that are not locked by update process how do i need to do(ex:row 1,2,3,4 and 1 is locked by update process(exclusive lock) and i want to leave that and i need to select 2,3,4 records).
View 6 Replies
View Related
Jul 20, 2005
Details:MS SQL 2000 dual Intel 1.2 GHz processors.1 GB RAM2.1 GB dBDynamic Memory Managment.No other apps running on this server.First question:Since I have Dynamic Memory Managment setup, Is it usuall that thesqlsrv.exe process on the server steadily climbs and is in the 800 to900 MB range. There is only about 20 MB free. In theory this is howDMM can work, but do people really see it work this way.Second question:I had users complaining about lockups in the app I have to supportthat connects to this dB. At first I thought it was the large use ofmemory, but once I was able to see in Enterprise Manager that therewas process blocking several other processes. EM then locked up and Icouldn't get to the details of what the exact process was that wasdoing the blocking. After restarting SQL services things were fine.When I checked the logs there was nothing there about a hung process.The logs seemed very sparse. Why would there not be anything in thelogs about it. The logs actually seem very thin on any information.Thanks,T.
View 1 Replies
View Related
Nov 14, 2007
Hi,
I was trying to extract data from the source server using OLEDB Source and SQL Server Destination when i encountered this error:
"Transaction (Process ID 135) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.".
What must be done so that even if the table being queried is locked, i wouldn't experience any deadlock?
cherriesh
View 4 Replies
View Related
Dec 3, 2007
Hello all,
I am running into an interesting scenario on my desktop. I'm running developer edition on Windows XP Professional (9.00.3042.00 SP2 Developer Edition). OS is autopatched via corporate policy and I saw some patches go in last week. This machine is also a hand-me-down so I don't have a clean install of the databases on the machine but I am local admin.
So, starting last week after a forced remote reboot (also a policy) I noticed a few of the databases didn't start back up. I chalked it up to the hard shutdown and went along my merry way. Friday however I know I shut my machine down nicely and this morning when I booted up, I was in the same state I was last Wenesday. 7 of the 18 databases on my machine came up with
FCB:pen: Operating system error 32(The process cannot access the file because it is being used by another process.) occurred while creating or opening file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf'. Diagnose and correct the operating system error, and retry the operation.
and it also logs
FCB:pen failed: Could not open file C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf for file number 1. OS error: 32(The process cannot access the file because it is being used by another process.).
I've caught references to the auto close feature being a possible culprit, no dice as the databases in question are set to False. Recovery mode varies on the databases from Simple to Full. If I cycle the SQL Server service, whatever transient issue it was having with those files is gone.
As much as I'd love to disable the virus scanner, network security would not be amused. The data and log files appear to have the same permissions as unaffected database files. Nothing's set to read only or archive as I've caught on other forums as possible gremlins. I have sufficient disk space and the databases are set for unrestricted growth.
Any thoughts on what I could look at? If it was everything coming up in RECOVERY_PENDING it's make more sense to me than a hit or miss type of thing I'm experiencing now.
View 13 Replies
View Related
Mar 11, 2008
Dear list
Im designing a package that uses Microsofts preplog.exe to prepare web log files to be imported into SQL Server
What Im trying to do is convert this cmd that works into an execute process task
D:SSIS ProcessPrepweblogProcessLoad>preplog ex.log > out.log
the above dos cmd works 100%
However when I use the Execute Process Task I get this error
[Execute Process Task] Error: In Executing "D:SSIS ProcessPrepweblogProcessLoadpreplog.exe" "" at "D:SSIS ProcessPrepweblogProcessLoad", The process exit code was "-1" while the expected was "0".
There are two package varaibles
User::gsPreplogInput = ex.log
User::gsPreplogOutput = out.log
Here are the task properties
RequireFullFileName = True
Executable = D:SSIS ProcessPrepweblogProcessLoadpreplog.exe
Arguments =
WorkingDirectory = D:SSIS ProcessPrepweblogProcessLoad
StandardInputVariable = User::gsPreplogInput
StandardOutputVariable = User::gsPreplogOutput
StandardErrorVariable =
FailTaskIfReturnCodeIsNotSuccessValue = True
SuccessValue = 0
TimeOut = 0
thanks in advance
Dave
View 1 Replies
View Related
Jan 30, 2007
How do I use the execute process task? I am trying to unzip the file using the freeware PZUnzip.exe and I tried to place the entire command in a batch file and specified the working directory as the location of the batch file, but the task fails with the error:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC0029151 at Unzip download file, Execute Process Task: In Executing "C:ETLPOSDataIngramWeeklyUnzip.bat" "" at "C:ETLPOSDataIngramWeekly", The process exit code was "1" while the expected was "0".
Task failed: Unzip download file
SSIS package "IngramWeeklyPOS.dtsx" finished: Success.
Then I tried to specify the exe directly in the Executable property and the agruments as the location of the zip file and the directory to unzip the files in, but this time it fails with the following message:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC002F304 at Unzip download file, Execute Process Task: An error occurred with the following error message: "%1 is not a valid Win32 application".
Task failed: Unzip download file
SSIS package "IngramWeeklyPOS.dtsx" finished: Success.
The command in the batch file when run from the command line works perfectly and unzips the file, so there is absolutely no problem with the command, I believe it is just the set up of the variables on the execute process task editor under Process. Any input on resolving this will be much appreciated.
Thanks,
Monisha
View 1 Replies
View Related
Mar 20, 2008
I am designing a utility which will keep two similar databases in sync. In other words, copying the new data from db1 to db2 and updating the old data from db1 to db2.
For this I am making use of the 'Tablediff' utility which when provided with server name, database, table info will generate .sql file which can be used to keep the target table in sync with the source table.
I am using the Execute Process Task and the process parameters I am providing are:
WorkingDirectory : C:Program Files (x86)Microsoft SQL Server90COM
Executable : C:SQL_bat_FilesSQL5TC_CTIcustomer.bat
The customer.bat file will have the following code:
tablediff -sourceserver "LV-SQL5" -sourcedatabase "TC_CTI" -sourcetable "CUSTOMER_1" -destinationserver "LV-SQL2" -destinationdatabase "TC_CTI" -destinationtable "CUSTOMER" -f "c:SQL_bat_Filessql5TC_CTIsql_filescustomer1"
the .sql file will be generated at: C:SQL_bat_Filessql5TC_CTIsql_filescustomer1.
The Problem:
The Execute Process Task is working fine, ie., the tables are being compared correctly and the .SQL file is being generated as desired. But the task as such is reporting faliure with the following error :
[Execute Process Task] Error: In Executing "C:SQL_bat_FilesSQL5TC_CTIpackage_occurrence.bat" "" at "C:Program Files (x86)Microsoft SQL Server90COM", The process exit code was "2" while the expected was "0". ]
Some of you may suggest to just set the ForceExecutionResult = Success (infact this is what I am doing now just to get the program working), but, this is not what I desire.
Can anyone help ?
View 9 Replies
View Related
Aug 20, 2014
I'm pulling data from Oracle db and load into MS-SQL 2008.For my data type checks during the data load process, what are options to ensure that the data being processed wouldn't fail. such that I can verify first in-hand with the target type of data and then if its valid format load it into destination table else mark it with error flag and push into errors table... All this at the row level.One way I can think of is to load into a staging table then get the source & destination table -column data types, compare them and proceed.
should I just try loading the data directly and if it fails try trouble shooting(which could be a difficult task as I wouldn't know what caused error...)
View 3 Replies
View Related
Feb 14, 2007
Hi Folks,
I am having this table locking issue that I need to start paying attention to as its getting more frequent.
The problem is that the data in the tables is live finance data that needs to be changed and viewed almost real time so what I have picked up so far is that using 'table Hints' may not be a good idea.
I have a guy at work telling me that introducing a data access layer is the only way to solve this, I am not convinced but havnt enough knowledge to back my own feeling up. (asp system not .net).
Thanks in advance
View 1 Replies
View Related
Jan 6, 2012
We are facing deadlock issue in our web application. The below message is coming:
> Session ID: pwdagc55bdps0q45q0j4ux55
> Location: xxx.xxx.xxx.xxx
> Error in: http://xxx.xxx.xxx.xxx:xxxx/Manhatta...Bar=&Mode=Edit
> Notes:
> Parameters:
> __EVENTTARGET:
> __EVENTARGUMENT:
[code].....
View 2 Replies
View Related
Feb 17, 2007
Hi,
I'm trying to upload the ASPNETDB.MDF file to a hosting server via FTP, and everytime when it was uploaded half way(40% or 50%)
I would get an error message saying:
"550 ASPNETDB.MDF: The process cannot access the file because it is being used by another process"
and then the upload failed.
I'm using SQL Express. Does anybody know what's the cause?
Thanks a lot
View 1 Replies
View Related
Nov 15, 2007
Hi. When I try to start a package manually clicking the Start Debugging button I get this after a little while:
Cannot process request because the process (3880) has exited. (Microsoft.DataTransformationServices.VsIntegration)
How can I prevent this from happening? This happens every time I want to start the package and
every time the process id is different. Here it is 3880.
Darek
View 13 Replies
View Related
Dec 20, 2006
select * from sysprocesses
How can I determine whether a process a system or user?
View 3 Replies
View Related
Aug 24, 2006
I have a File System Task Copy file operation to copy a file in an SSIS package. The package when scheduled as a job fails with the following error:
The process cannot access the file 'C:ETLConsignmentAppleAppleRawFile.txt' because it is being used by another process.".
However when I right click on the package and execute it manually from the Integration Services it runs successfully without any problem. I am not certain on how to resolve this issue any inputs will be much appreciated.
Thanks,
Monisha
View 19 Replies
View Related
Feb 6, 2008
Error: 0xC002F304 at Rename file 1, File System Task: An error occurred with the following error message: "The process cannot access the file because it is being used by another process.".
When running two File System Tasks after each other, with the same file, the file is still locked when running the second task. Resulting in an error: 0xC002F304 at Rename file 1, File System Task: An error occurred with the following error message: "The process cannot access the file because it is being used by another process.".
I found a workaround by addind a Execute Process Task before the second File System Task that pings to the localhost. This results in a 5 second delay, but there must be a better solution. Anyone?
View 9 Replies
View Related
Nov 23, 2006
While configuring log shipping using SQL 2000 Ent, the copy process failed with this message :
The process cannot access the file because it is being used by another process.
does anyone know what cause this ?
SAP R/3 is configured with the system, could this be the problem ?
View 3 Replies
View Related
Apr 7, 2008
i'm going nuts with SQL server notification thing. I have gone throigh this artical which tells how to set user http://www.codeproject.com/KB/database/SqlDependencyPermissions.aspx. This article show how to create new user and setup for sql server notification.But In my case user was alredy existing in database. which is very common senario in most cases. So i did following( check the SQL script below) but then i get this error
"A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)"
this my sql script
use [master]Go
-- Ensuring that Service Broker is enabled ALTER DATABASE [DatabaseName] SET ENABLE_BROKERGO
-- Switching to our databaseuse [DatabaseName]GO
CREATE SCHEMA schemaname AUTHORIZATION usernameGO
ALTER USER username WITH DEFAULT_SCHEMA = schemaname GO
/* * Creating two new roles. We're not going to set the necessary permissions * on the user-accounts, but we're going to set them on these two new roles. * At the end of this script, we're simply going to make our two users * members of these roles. */EXEC sp_addrole 'sql_dependency_subscriber' EXEC sp_addrole 'sql_dependency_starter'
-- Permissions needed for [sql_dependency_starter]GRANT CREATE PROCEDURE to [sql_dependency_starter] GRANT CREATE QUEUE to [sql_dependency_starter]GRANT CREATE SERVICE to [sql_dependency_starter]GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to [sql_dependency_starter] GRANT VIEW DEFINITION TO [sql_dependency_starter]
-- Permissions needed for [sql_dependency_subscriber] GRANT SELECT to [sql_dependency_subscriber] GRANT SUBSCRIBE QUERY NOTIFICATIONS TO [sql_dependency_subscriber] GRANT RECEIVE ON QueryNotificationErrorsQueue TO [sql_dependency_subscriber] GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to [sql_dependency_subscriber]
-- Making sure that my users are member of the correct role.EXEC sp_addrolemember 'sql_dependency_starter', 'username'EXEC sp_addrolemember 'sql_dependency_subscriber', 'username'
View 10 Replies
View Related
Mar 19, 2008
Hi I am using VWD 2008, SQL Express 2005, Reporting Services, Win-XP, IIS5Basically let's say I have 2 pages:Page1: has a SQLDataSource control that populates a GridView from a table from a database file myDB.mdf (no code behind)Page2: has a reportviewer control that show a report with data from the same table from myDB.mdf from the reportserver, (no code behind)I have attached myDB.mdf to the SQL Server Express using the SQL Server Management Studio Express.If I first open Page2 to display the ReportViewer it works ok. or using the Report ManagerNow this is the problem:If after that I try to open Page1 then a get an error message:Cannot open user default database. Login failed.Login failed for user 'myServerASPNET'. Exception Details: System.Data.SqlClient.SqlException: Cannot open user default database. Login failed.Login failed for user 'myServerASPNET'.Then I have to restart the SQL Server to fix it,Now I can open Page1 ok, but if after this I try to open Page2 (ReportViewer) againThen I get this error:" An error has occurred during report processing. o Cannot create a connection to data source 'my_Datasource'. &And this error if open the report using the report manager:" An error has occurred during report processing. o Cannot create a connection to data source 'my_Datasource'. ยง Unable to open the physical file "C:InetpubwwwrootWebsiteApp_DatamyDB.mdf". Operating system error 32: "32(The process cannot access the file because it is being used by another process.)". &Now if i check the Management Studio Express again, you can see that myDB.mdf was detached. It seems to be there by it has no Tables or definitions, so I have to attach it again..Do you know how to fix this?Thanks in advance,Ed
View 5 Replies
View Related
Mar 21, 2001
Hi All,
I came across a weird problem in the morning in SQL Server 7.0 on NT Cluster Server.
* SP_WHO - returned a list of System Process IDs where ID = 6 shown as a sql server User comming from a web server
doing rollback on a stored procedure..
a) I tried to KILL the user but I couldn't.
b) Next I stopped the IIS service on Webserver and tried to KILL the user but still couldn't. Surprisingly the user was showing up as comming from
the same Webserver eventhough the IIS Service was not running.
* When I checked in the Current Status window of Enterprise Manager - the same Process ID was shown as SYSTEM User doing rollback on a stored
procedure.
Because of above user problem I was not able to do any Delete or update in the database. Also Restore of database failed because of the above user.
I could get rid of this problem only after STOPPING and STARTING the SQL Server Service.
Does any one one have any IDEA on this type of problem. If so Please let me why it happend and what needs to be done to resolve this from happening again
Thanks
Sekhar
View 3 Replies
View Related
Oct 17, 2006
Dear friends,
I'm working on 5 different servers,my work is to write the script and make it to run successfully.
I've two databases for me one to test the script and the other for the final script. after that i'l implement in other servers. after successful execution, the testing team will take care. now my problem is, some times i'm not able to find the exact script which was successfully runned.(on some servers, modifications were done.because some dependencies will be increased).
my question is how to maintain the exact script? may be this is a silly question, but after one week i'm not able to find the exact script.
please help me in this regard with your valuble suggesions.
Vinod
View 3 Replies
View Related
Jul 20, 2005
Hi,Please help.I have 2 tables as followings:CREATE TABLE [dbo].[Master] ([masitemno] [char] (10) NOT NULL ,[masqty] [decimal](10, 3) NOT NULL ,[masunitcost] [decimal](10, 2) NOT NULL) ON [PRIMARY]GOCREATE TABLE [dbo].[Transaction] ([transeqno] [int] NOT NULL ,[tranitemno] [char] (10) NOT NULL ,[tranqty] [decimal](10, 3) NOT NULL ,[tranamount] [decimal](10, 2) NOT NULL ,[tranunitcost] [decimal](10, 2) NOT NULL) ON [PRIMARY]GOALTER TABLE [dbo].[Master] WITH NOCHECK ADDCONSTRAINT [PK_Master] PRIMARY KEY NONCLUSTERED([masitemno]) ON [PRIMARY]GOALTER TABLE [dbo].[Transaction] WITH NOCHECK ADDCONSTRAINT [PK_Transaction] PRIMARY KEY NONCLUSTERED([transeqno]) ON [PRIMARY]GOTable "Transaction" has about 1,000,000 (one million rows) and Table"Master" has about 500,000 rows.I have to update "MASTER" table with "TRANSACTION" table withrow-by-row processing basis sorting byprimary key TRNSEQNO column.Sometimes TRANSACTION can explicitly SET "MASQTY" and "MASUNITCOST"columns (TRANUNITCOST<>0) of MASTERwhich linked byitemno and after that AMOUNT column of next row ofTRANSACTION will used thisnew UNITCOST of MASTER as followed statements.-------------------------------------------------declare @count int, @max intset @count=1set @max = (select max(seqno) from transaction(nolock)while @count<=@maxbeginupdate TRANSACTIONset TRANAMOUNT = TRANQTY * (select MASUNITCOST from MASTERwhere MASITEMNO=TRANITEMNO)where TRANSEQNO = @countand TRANUNITCOST = 0update MASTERset MASQTY = MASQTY + TRANQTYfrom TRANSACTIONwhere TRANSEQNO = @countand TRANUNITCOST = 0and MASITEMNO=TRANITEMNOupdate TRANSACTIONset TRANAMOUNT = TRANQTY * TRANUNITCOSTwhere TRANSEQNO = @countand TRANUNITCOST <> 0update MASTERset MASQTY = MASQTY + TRANQTY,MASUNITCOST = TRANUNITCOSTfrom TRANSACTIONwhere TRANSEQNO = @countand TRANUNITCOST <> 0and MASITEMNO=TRANITEMNOset @count = @count +1end-------------------------------------------------The above sample statements take me more than 10 hrs. (I quit beforeactually done) with MS SQL SERVER 7.5 SP4.on WIN2K SERVER (2 XEON PROCESSORS, 1GB MEM.). I tried to use triggerbut result is not correct.Please advise on shorten running time (in minutes , maybe) and betterperformance.Thank you and appreciate any suggestionsNipon Wongtrakul
View 5 Replies
View Related
Aug 21, 2007
Sorry but how do you configure to run IN PROCESS. My task runs like this in a BAT file
dtexec /f "\ssssagemetxteursAdminFCTestDTSXTest_AlexRename_file_alex.dtsx"
Thanks,
aL.
View 1 Replies
View Related
Dec 14, 2006
Hi
In installing sql express/management, during installion I get an error message when it comes to sql db services - It says setup failed because there is no process on the other end of the pipe.
Also, When I go to Start/All Programs/Microsoft Server 2005/Configuration Tool it says empty
This is running on Vista RC1
There is no way for me to enable remote connection
When I start Microsoft Sql Server Management Studio there is no server name to select from or choose from browseing
There is no sqlbrowser in SERVICES for me to start.
Also not install during installation is the work station component.
Any help?
Thanks
View 1 Replies
View Related
Feb 4, 2008
Dear all,
I'm starting an estimation exercise for an ETL/Datawarehouse project.
Does any of you knows a proven methodology and benchmark information to be able to estimate the overall effort of an ETL project. We have an idea on the number of tables/fields in the source systems, and a (very high-level) idea on the complexity of the different transformations.
Is there any website/document/whitepaper somewhere where an estimation technique is presented ?
Thanx
Maylo
View 1 Replies
View Related
Mar 9, 2007
I'm looking for Ideas on how to handle a Pldege Reminder process. For example; a pledge is made to pay $2400 over the next two years. They will pay $100 per month and each month a reminder will be sent. No real mistery if there is a balance you send a reminder. My problem is how to handle things like what if they want to pay quarterly or annually and how to determine if a payment is really due based on when they paid last, etc... You most likely see what I mean.
If anyone has done this in the past and/or has any ideas and is willing to share I would greatly appreciate any help.
Some stuff that may help you help me better:
tblClient (ClientID)
tblPledge (PledgeID, ClientID, PledegedAmt, PledgeDate,Frequency,NumberYears)
tblPledgePayments (PmtID, PledgeID,PmtAmt,PmtDate)
View 3 Replies
View Related
Jun 18, 2007
I'm going to design a web page for students parking permit application.I'm new to asp.net, I have a process in mind doing it like this:
The form asks student to choose a permit type, then fill in applicant info, like name, grade, vehicle info, student may have 2 vehicles, and payment method, check or credit card,
I plan to create 3 tables like tblPermit, tblapplicant, tblVehicle.After the students fill in the form, click submit button, I pass the values and call a stored procedure, some thing like this.Dim Cmd As New Data.SqlClient.SqlCommand(MySQL, MyConn)
Cmd.CommandType = Data.CommandType.StoredProcedure
Then in the stored proceudre, I will do :
Begin
insert into Permit table, then get permitID, by using something like this:Select @PermitID=@@Identity
Then insert into Student table, then use
Select @StudentID=@@Identity
Then insert into vehicle table.
All the above 3 processes I put it in begin, end--So that they will not messed up with other applicants data.
I think begin...end is one transaction.
SO am I doing correctly this way? Thanks
View 2 Replies
View Related
Mar 27, 2001
Hi all,
I have SQL Server 7.0 with SP2 on it and I am not able to kill one of the SPID's who is running a SELECT Statement.
When I saw in the current activity in EM I see the STATUS as ROLLBACK, COMMAND as SELECT, APPLICATION as MS SQLEM-DATATOOLS, WAITTIME as 5375 and WAITTYPE as CXPACKET..
I also tried to reboot the machine of that particular SPID , but it still shows up in the Enterprise Manager.
Can anyone tell me how to kill this process and how to get around this Problem
Any Ideas,
Thanks in Advance
Venu
View 4 Replies
View Related
May 30, 2001
Hi
One DTs package job running and we stop the job.Job was stoped but process not killing.We tried using kill spid but no use.please any body give suggestion. this production server.
View 3 Replies
View Related
Sep 4, 2001
Hi, there, do you know how to kill a process without restart SQL Server?
I tried Kill from SQL Query analyzer and Enterprise Manager, but it not work as before. Please advise, Thank you very much
Tony
View 1 Replies
View Related
