Hey there..
I need to insert some data into a linked server where I need to insert the Identity field. When I try to turn IDENTITY INSERT on, I get this error
The object name 'Server-SQL.MyDatabase.dbo.MyTable' contains more than the maximum number of prefixes. The maximum is 2.
The line I try to execute is this...
SET IDENTITY_INSERT [Server-SQL].MyDatabase.dbo.MyTable ON
From my searching around about this error, the workaround seems to be aliasing the table name, but I can't really see how to use an alias in this situation.
Hi, I am having problem in bulk update of a sql server table haning identity column from a datatable( has no identity column) using sqlbulkcopy. I tried several approaches, but it does not show any error nor is the table getting updated. But the identity value seems to getting increased every time. thanks. varun
Greetings,If I use a "select into" to clone a table, all attributes are createdcorrectly, however, if I use the same statement across a linked server,my identity column loses its IDENTITY specification.Is this a known issue or basic functionality of using "select into"with linked servers?Kurt
While I have learned a lot from this thread I am still basically confused about the issues involved.
.I wanted to INSERT a record in a parent table, get the Identity back and use it in a child table. Seems simple.
To my knowledge, mine would be the only process running that would update these tables. I was told that there is no guarantee, because the OLEDB provider could write the second destination row before the first, that the proper parent-child relationship would be generated as expected. It was recommended that I create my own variable in memory to hold the Identity value and use that in my SSIS package.
1. A simple example SSIS .dts example illustrating the approach of using a variable for identity would be helpful.
2. Suppose I actually had two processes updating these tables, running at the same time. Then it seems the "variable" method will also have its problems. Is there a final solution other than locking the tables involved prior to updating them or doing something crazy like using a GUID for the primary key!
3. We have done the type of parent-child inserts I originally described from t-sql for years without any apparent problems. (Maybe we were just lucky.) Is the entire issue simply a t-sql one or does SSIS add a layer of complexity beyond t-sql that needs to be addressed?
I want to insert a new record into a table with an Identity field and return the new Identify field value back to the data stream (for later insertion as a foreign key in another table).
What is the most direct way to do this in SSIS?
TIA,
barkingdog
P.S. Or should I pass the identity value back in a variable and not make it part of the data stream?
I have two tables having one row identifier column each of int datatype. Both these columns are part of the respective primary keys. Now as a part of my process, i'm inserting one small part of data from one table to another table. This was working fine but suddenly started getting error like
Violation of PRIMARY KEY constraint 'PK_TargetTable'. Cannot insert duplicate key in object 'DW.TargetTable'. The duplicate key value is (58544748).First I checked with DBCC CHECKIDENT with NORESEED and found that there is difference in the current identity value and current column value. I fixed it by running DBCC CHECKIDENT. But to my surprise again got the same issue. interesting thing is that the error comes after inserting 65466 records.
hi everybody.I have linked db2 server .Select from this server goes fine but when i do insert
case A
insert into pricing..UCIT.BOOM(A,B) VALUES(3,5) OLE DB provider 'MSDASQL' reported an error. The provider did not give any information about the error
case B SELECT * from OPENQUERY(pricing, 'insert into UCIT.BOOM(A,B) VALUES(3,5)') Server: Msg 7357, Level 16, State 2, Line 1 Could not process object 'insert into UCIT.BOOM(A,B) VALUES(3,5)'. The OLE DB provider 'MSDASQL' indicates that the object has no columns.
how to do insert into linked db2 server? I am running SQL 2000 sp2 on WIN20000 and DB2 UDB 7.2 service pack 4
Hi, I am trying to insert data from a SQL (7.0) table into an Access table but I get an error message saying the MS DTC is nor running. Apart from E.M, how can you check this. Using Query Analyzer I can select form tyhe destination table but not insert - perhaps I have missed something - acn you please help?
Using Visual Studio 2005 Prof and SQL Server everywhere.
How do get the identity column value after insert record.
With SQL Server 2005, its quite easy to get by creating and insert statement on the tabledapter ( Insert statement followed by a select statement where identitycolumn = scope_identity())
I have two sql servers, I have defined each one as a linked server tothe other. I can mostly access the servers from one another, but I getthe following error on a sql insert.Insert statement...INSERT INTO [U1STSV02].[Custom Log Shipping].dbo.ls_secondary_files(database_name, tl_file_name, tl_applied, lsplanid, lssecid,compression_type) VALUES ('javaweb', 'c:', 'N', 1, 1, 0)i get an error messageServer: Msg 913, Level 16, State 8, Line 1Could not find database ID 10. Database may not be activated yet or maybe in transition.I can query the table with select using the followingselect * from [u1stsv02].[custom log shipping].dbo.ls_secondary_filesand I can delete rows from the table usingdelete from [u1stsv02].[custom log shipping].dbo.ls_secondary_filesI have searched Microsoft's site and googled for a while and cannot seemto find a solution.Both servers are running SQL Server 2000 with service pack 4Thanks in advance for any replies.Steve KuekesPhysicians Pharmacy Alliancejust remove the "1", "2", "3" from my email to reach me.
hi,on localServer i execute this queryINSERT INTO table (A, B, C)SELECT A, B, C FROM LinkedServer.myDB.dbo.tableeverything is fine. But if i execute this oneINSERT INTO LinkedServer.myDB.dbo.table (A, B, C)SELECT A, B, C FROM tableit is very slow. Is there any solution to make it any faster?
Both servers running SQL 2000I have set up on our local SQL server (using Enterprise Manager) a linkedserver running on our ISP. Just did new linked server and added remotepassword and login.The following three queries work:insert into LinkedServer.dbname.dbo.Table2select *from LinkedServer.dbname.dbo.Table1select *into LocalTablefrom LinkedServer.dbname.dbo.Table1insert into LocalTableselect *from LinkedServer.dbname.dbo.Table1This query, which is what we really want to do, does not work:insert into LinkedServer.dbname.dbo.Table1select *from LocalTableand returns the error: 'The cursor does not include the table being modifiedor the table is not updatable through the cursor.'I am new to all this and would welcome some help.Adrian
Insert statement to remote server is running very slowly. I have run Profiler and find there is a 'sp_cursor' call for each row. The source system is SQL2005 and destination is SQL2000(sp4). The linked server is using 'SQL server' type connection. Source query is against a single table with a where clause. source and destination table are identical with Primary keys. Purpose is just to move the rows. Connection is a slow network connection - should be ok. I have already overcome same problem for related update and delete queries by use of 'EXECUTE (query) AT LinkedServer' that works great - but insert can not take advantage of this...
INSERT [LinkedServSQL2000sp4].dbname.schema.tablename ({column list}) Select {column list} from tablename WHERE col1 = '7/20/2006' AND col2 in (2,5,7,12,32,54,45,33)
Ok I think I will need to use a temp table for this and there is no code to share as of yet. Here is the intent.
I need to insert data into two tables (a header and detail table) the Header Table will give me lets say an order number and this order number needs to be placed on the corresponding detail lines in the detail table.
Now if I were inserting a single invoice with one or more detail lines EASY, just set @@Identity to a variable and do a second insert statement.
What is happening is I will be importing a ton of Invoice headers and inserting those into the header table. The details are already in the database across various tables and and I will do that insert based on a select with some joins. As stated I need to get the invoice number from IDENTITY of the header table for each DETAIL insert.
I am assuming the only way to do this is with a loop... Insert one header, get identity; Insert the detail table and include the IDENTITY variable, and repeat.
I have a problem described as follows: I have a table with one instead of insert trigger:
create table TMessage (ID int identity(1,1), dscp varchar(50)) GO Alter trigger tr_tmessage on tmessage instead of insert as --Set NoCount On insert into tmessage
[code]....
When I execute P1 it returns 0 for Id field of @T1.
How can I get the Identity in this case?
PS: I can not use Ident_Current or @@identity as the table insertion hit is very high and can be done concurrently.Also there are some more insertion into different tables in the trigger code, so can not use @@identity either.
I'm writing an insert trigger in one SQL Server database that is supposed to insert another record into a linked SQL Server database. I have the linked server set up and have been using it for a few weeks in queries and stored procedure with no problem. Now that I'm trying to use it within a trigger and it just bombs.
I'm getting the following message in one of my logs and I don't know what it means... "Failed to obtain TransactionDispenserInterface: XACT_E_TMNOTAVAILABLE". I've googled around, but can't really find anything. Any help would be appreciated.
Hei,We have 2 MS SQL SERVER 2000 installed on 2 different servers (2 separatedmachines).I am triing to connect them så that when one row is added to the table inthe database in main server - then the same row is added to the same tablein the second server database.I made the insert trigger on the table in the first server ( the secondserver is added as a linked server):-----------------------------------------------------------------------------------------create trigger ti_myTabe1 on myTable1 for insert asbegindeclare ........BEGINinsert into server2.myDatabase2.owner.myTable2(column1, column2, column3)SELECT column1, column2, column3FROM inserted insEND......end-----------------------------------------------------------------------------------------When I run the statement in "SQL Query Analyzer"on the first server:insert into Table1 values(va1,val2,val3)then error is coming:Server: Msg 7391, Level 16, State 1, Procedure ti_myTabe1 , Line 19The operation could not be performed because the OLE DB provider 'SQLOLEDB'was unable to begin a distributed transaction.[OLE/DB provider returned message: New transaction cannot enlist in thespecified transaction coordinator. ]OLE DB error trace [OLE/DB Provider 'SQLOLEDB'ITransactionJoin::JoinTransaction returned 0x8004d00a].The straing thing is: if I run the statement in "SQL Query Analyzer"on thefirst server:insert into server2.myDatabase2.owner.myTable2 values(va1,val2,val3)then it works!But not inside the trigger!!! - What I am doing wrong ?Any idea is greatly appeciated.
I have configured a non-SQL linked server (via an OLE DB provider) and I wish to insert data into it via Service Broker but I am getting the following error in the SQL Server log: The activated proc [dbo].[sp_ mytableServiceProgram] running on queue TestDB.dbo.mytableQueue output the following: 'Cannot promote the transaction to a distributed transaction because there is an active save point in this transaction.'
As you see below, my strored proc. is not issuing any 'save trans' statements, so why is it not allowing me to wrap my code in a transaction? How else can I use a transaction (in order to not lose anything from the queue) and yet still be able to insert to the linked server?
CREATE PROC sp_mytableServiceProgram AS SET NOCOUNT ON;
-- This procedure continues to process messages in the queue until the -- queue is empty.
WHILE (1 = 1) BEGIN BEGIN TRANSACTION; --BEGIN DISTRIBUTED TRANSACTION; --Tried this but didn't help.
-- Receive the next available message WAITFOR ( RECEIVE TOP(1) -- just handle one message at a time @MessageTypeName = message_type_name, @MessageBody = message_body, @Dialog = conversation_handle FROM mytableQueue ), TIMEOUT 2000 ;
-- If RECEIVE did not return a message, roll back the transaction -- and break out of the while loop, exiting the procedure. IF (@@ROWCOUNT = 0) BEGIN ROLLBACK TRANSACTION; BREAK; END ;
SET @XML = CAST(@MessageBody AS XML);
INSERT INTO LINKEDSERVER.dbname.user.mytable SELECT tbl.rows.value('@doc_no', 'INT') AS doc_no, tbl.rows.value('@queryid', 'NVARCHAR(50)') AS queryid, tbl.rows.value('@ar_num', 'NVARCHAR(50)') AS ar_num, tbl.rows.value('@status', 'NVARCHAR(20)') AS status, tbl.rows.value('@creationtime', 'DATETIME') AS creationtime, tbl.rows.value('@note', 'NVARCHAR(250)') AS note, tbl.rows.value('@posted', 'NCHAR(1)') AS posted, tbl.rows.value('@kms', 'INT') AS kms, tbl.rows.value('@schresid', 'NVARCHAR(50)') AS schresid, tbl.rows.value('@resolution_code', 'NCHAR(8)') AS resolution_code, tbl.rows.value('@page_count', 'INT') AS page_count, tbl.rows.value('@new_serial_number', 'NVARCHAR(20)') AS new_serial_number, tbl.rows.value('@taskresolution', 'NVARCHAR(250)') AS taskresolution FROM @XML.nodes('/inserted') tbl(rows);
-- If the INSERT did not insert any rows, rollback. IF @@ROWCOUNT = 0 BEGIN ROLLBACK TRANSACTION; BREAK; END COMMIT TRANSACTION; END GO
I am using linked server to insert data to a table. When I do select, it does show me results but when I do insert, it does not work. My source/destination has exact same data types defined. Any idea?
insert into dbo.tb_PERSONNEL
select * from openquery(CADC1, 'SELECT PERSONNEL_1_NF.ID, PERSONNEL_1_NF.NAME, PERSONNEL_1_NF.PNUM, PERSONNEL_1_NF.PN
I have the folowing problem that I could use some help with :
I have an SQL server database acting as a back end to an access dbase. The SQL srv table contains over 32 million records and I am trying to use an append query (in access) to import a further 2 million records to the SQLSRV table. The append query fails with the message 'Insert on table bcdsales failed' followed by an ODBC timeout error message. I can append one record fine but a mass import fails.
Unfortunately i can't use SQL srv to do the import (internal policy says we must stick with access front end for now).
I have a historical table on a dedicated SQL Server (let's call it the reporting db) that is populated every morning with production data that does not already exist. The data in the prod table is purged after 7 days and nothing is ever deleted from the historical table. I have set up the linked server between the two 2008 SQL Servers, but when I try to run this simple query from the reporting DB, it takes more than 5 minutes and still "executing". I eventually have to cancel it:
-- INSERT INTO Temp_Import_historical SELECT TOP 1 * FROM [192.168.1.100].ProdDB.dbo.Temp_Import_historical a WHERE NOT EXISTS (select [Temp_Import_ID] from Temp_Import_historical where a.[Temp_Import_ID] = Temp_Import_historical.[Temp_Import_ID])
I have omitted the INSERT statement on purpose, since I can't even get to output 1 row. Why this is such a resource intensive query?
I am getting error when I try Inserting data in sybase 12.5 using linked server from SQL2K5
I am able to select
Following is the code i am using.error is same for both stmts insert into l_syb_ibt.ibtqa.dbo.rajtest (id)values (1) insert openquery(l_syb_ibt, 'select id from rajtest where 1=0') values (1000)
please help.thanks in advance
following is the error OLE DB provider "MSDASQL" for linked server "l_syb_ibt" returned message "Transaction cannot have multiple recordsets with this cursor type. Change the cursor type, commit the transaction, or close one of the recordsets.". Msg 7343, Level 16, State 2, Line 1 The OLE DB provider "MSDASQL" for linked server "l_syb_ibt" could not INSERT INTO table "[l_syb_ibt].[ibtqa].[dbo].[rajtest]".
I have a 2000 machine which calls a stored procedure on another 2000 machine via a linked server. The results come back and insert into a temporary table.
When I use the same code executing the from the 2000 machine over to 2005 machine via a linked server I cannot insert into the table. But I am able to see the data if I remove the insert statement.
I have tried to place the data into a permanent table without success. I have also checked to be sure the linked server properties are the same.
Any help on this would be appreciated. Below is the code. It is very simple and returns only one value but the bigger procedure that is ran returns several records and mutliple columns. This seems to easy but doesn't work.
Hello I have a problem with setting relations properly when inserting data using adonet. Already have searched for a solutions, still not finding a mistake... Here's the sql management studio diagram :
and that causes (at line 67):"The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Question_SurveyTemplate". The conflict occurred in database "ankietyzacja", table "dbo.SurveyTemplate", column 'id'. The statement has been terminated. at System.Data.Common.DbDataAdapter.UpdatedRowStatusErrors(RowUpdatedEventArgs rowUpdatedEvent, BatchCommandInfo[] batchCommands, Int32 commandCount) at System.Data.Common.DbDataAdapter.UpdatedRowStatus(RowUpdatedEventArgs rowUpdatedEvent, BatchCommandInfo[] batchCommands, Int32 commandCount) at System.Data.Common.DbDataAdapter.Update(DataRow[] dataRows, DataTableMapping tableMapping) at System.Data.Common.DbDataAdapter.UpdateFromDataTable(DataTable dataTable, DataTableMapping tableMapping) at System.Data.Common.DbDataAdapter.Update(DataSet dataSet, String srcTable) at AnkietyzacjaWebService.Service1.createSurveyTemplate(Object[] o) in J:\PL\PAI\AnkietyzacjaWebService\AnkietyzacjaWebServicece\Service1.asmx.cs:line 397"
Could You please tell me what am I missing here ? Thanks a lot.
I get this error when trying to alter a stored procedure that has an insert statement referencing a new linked server I created:
INSERT INTO [servername].databasename.dbo.DirectReport ...
Msg 18456, Level 14, State 1, Procedure Get_Direct_Pay_Move_Data, Line 17 Login failed for user 'NT AUTHORITYANONYMOUS LOGON'.
I added Administrators and my logon to the permissions of my linked server but still get this error when it tries to save my stored proc...the one which has that insert.
We have an application written in MS Access. The tables are linked to a SQL 2000 database. The problem is that sometimes insert a new record in a table freezes and times out after a while without anything has happened. When installing the application the *mdb file is copied over to the C drive and an ODBC connection is written to the registry. The application is used by many in the company. We have problems on tables defined with IDENTITY columns. Can this be our problem and how can we solve it?
I just created a new table with over 100 Columns and I need to populated just the first 2 columns.
The first columns to populate is an identify column that is the primary key. The second column is a foreign_key to an other column and I am trying to populate this columns with all the values from the foreign_key value. This is what I am trying to do.
column1 = ID column2= P_CLIENT_D
SET IDENTITY_INSERT PIM1 ON
INSERT INTO PIM1 (P_CLIENT_ID) SELECT Client.ID FROMP_Client
So I am trying to insert both an identity values and a value from an other table while leaving the other columns blank. How do I go about doing this.
I'm just learning SSIS and I've hit my first bump. I am doing a bulk import from a tab delimited text file to an empty sql table that has a Idendity column defined. How do I tell the bulk insert task to skip that column when inserting from the text file. If I remove the identity column it imports the data fine, but I want to create the indentity column in the table too.
after i have inserted a row into the DB i am trying to get the last identity like this : Dim myCommand2 As New SqlCommand("SELECT @@IDENTITY AS 'Identity'", ) Dim myReader2 As SqlDataReader myReader2 = myCommand2.ExecuteReader() where myConnection2 is the connection objectafter i did this i dont underdsand how do i get the 'Identity' value?i tried myReader2 ('Identity') but no luckany 1 can helpthnaks in advancepeleg
Let me start off by saying I have posted this on: comp.databases.ms-sqlserver
My apologies, try not to do that again.
I have a table that I am trying to insert into with data from another table. Here is that Query:
INSERT INTO item (identifier, name, customlgtxt1, weight,mainprice, customnumber3, customnumber4) Select partno, name, description, weight,price, qtyprice, qty From Import2
This seems to work fine.
My dilemma has to do with an 'id' column in that item table. This is incrementally updated by one..ie Natural Key. I have set it to Identity and used Set @@IDENTITY AS 'id'...worked like a charm. But for reasons that have to do with a front end admin tool used by the home office I can't set this column to have an Indentity property. Screws up the insert done with the admin tool.
This is a item/price database by the way. Name of item, price, description, qty price..etc.
So I've tried to put this trigger on the item table CREATE TRIGGER auto_fill ON [dbo].[item] FOR INSERT, UPDATE AS BEGIN declare @maxc int set @maxc = (select Max(id) from item) set @maxc = @maxc +1 Select 'id' AS '@maxc', notorderable = '0', createdon = getdate(), createdat = getdate(), createdby = 'Steve', modifiedon = getdate(), modifiedat= getdate(), modifiedby = 'Steve'
END
But the Insert Into statement (see above) will not work...giving the error "Cannot insert the value NULL into column 'id', table 'new_Catalog1v1.dbo.item" Which I know...that's why I set it to Identity..but that cannot be.
So the question is how to set an autonumber (or natural key or I'm not sure of the name) that updated from the max(id)table when inserting from another table.
And then...one more.
I have to update a table named UNIQUEIDS with the lastest value of the id column (max(ID))..UNIQUEIDS keeps track of the latest value inserted into the id column for a number of tables. Here is another trigger I put on the item table to update the UNIQUEIDS table.
create trigger upUniqueIds_item on [dbo].[item] for update,Insert, delete as begin Select @@Identity as 'id' from inserted Update uniqueids set id = @@identity Where tablename = 'item' End
But of course this doesn't work if I can't set the columns to IDENTITY.
I hope someone can help and I hope my explanation had made sense. Need to increment the id field using max(id) and update another table with the last imported value of max(id). One occurs during insert..another after the insert..i think?
