Identity Out Of Sync After Unexpectedly Shut Down
Jan 11, 2000
I have 2 DB on SQL Server 7, that are synchronized by a continuous transactional replication.
The tables have a primary key on an identity column. In order to avoid conflicts,
the identities have different seeds, and increment equal to 10.
When the server shuts unexpectedly, the current value for the
identity column goes out of sync, that is it assumes the greatest value inserted.
The workaround is to run DBCC checkident to correct the identity value.
Is it a bug? Did anyone run in the same problem?
TIA
Tania
View 2 Replies
ADVERTISEMENT
May 16, 2015
We are running merge replication. My identity value was out of sync and the inserts stopped working. I Reseeded the identity value to 1500000 and ran "sp_adjustpublisheridentity" which set that to the new range (and table constraint)Â in the MSMerge file and table. I discovered my error and Reseeded the table back to 150000. How to I get the new range to be created when it is LESS than 1500000 in the MsMerge file???? Can I use the sp_restoreidentity....???
View 3 Replies
View Related
Sep 15, 2004
hi
can i shut down MSSQL Server whn any transaction is active?
View 3 Replies
View Related
May 22, 2007
I have a queue that, after running fine for several days will mysteriously turn off. It doesn't seem to be related to a poison message because I can restart the queue and processing resumes just fine. What are all the scenarios that would cause a queue to turn itself off, so I can 1) take preemptive action to prevent it from happening in the first place and 2) respond appropriately when it occurs.
Also, how to properly setup and verify that the BROKER_QUEUE_DISABLED is working properly. This is the SQL that I have so far, but is there a more direct way to raise the event other than writing an activated stored procedure that rolls back 5 times?
CREATE QUEUE [EventNotificationsQueue];
GO
CREATE SERVICE [EventNotificationsService]
ON QUEUE [EventNotificationsQueue]
([http://schemas.microsoft.com/SQL/Notifications/PostEventNotification]);
GO
CREATE EVENT NOTIFICATION [QueueDisabled]
ON QUEUE [MyQueue]
FOR BROKER_QUEUE_DISABLED
TO SERVICE 'EventNotificationsService', 'MyDatabase';
GO
View 7 Replies
View Related
Jan 27, 2006
Routinely when I use BIDS to work on a report design, I cannot close BIDS because I get a message box that says:
Microsoft Visual Studio cannot shut down because a modal dialog is active. Close the active dialog and try again.
Of course, there is no visible dialog open. I actually have to terminate the process from task manager.
I do not get this problem when using SSIS or SSAS. Only SSRS.
Any Ideas?
Thanks!
BobP
View 76 Replies
View Related
Jun 20, 2008
will it happen any thing wrong if i suddenly stopped index rebuild script while running?
Arnav
Even you learn 1%, Learn it with 100% confidence.
View 4 Replies
View Related
Feb 20, 2006
I have noticed a strange behaviour when running some of my packages with dtexec. The packages use EventHandlers to log information to a database using the Execute SQL Task with the query stored in a variable. This variable is further part of the package configuration, so that I can change the query without changing the package itself. Now, this all works fine, until I made a typo in the query causing the syntax to be invalid, ie changing SELECT to SELCET. Now, one would expect the package to fail, and it does, if I run it through the debugger in Visual Studio, but when I run it using dtexec it just hangs and I have to kill the process using the Task Manager.
Peculiarly, I tried doing the same thing with a task that was not contained in an EventHandler, and then the package fails as expected, both when running it in the debugger and using dtexec. This is not a major problem, but what I am afraid of is that one day the database server will be down and cause an error in the Execute SQL Task in the EventHandler, causing dtexec to hang indefinitely. Has anyone else had problems like these?
Regards,
Lars
View 3 Replies
View Related
Jan 26, 2005
Is there a way to tell who the guilty person is:
The process winlogon.exe has initiated the shutdown of computer DOCSITE01FDK on behalf of user NT AUTHORITYSYSTEM for the following reason: Application: Maintenance (Planned)
Reason Code: 0x84040001
Shutdown Type: shutdown
Comment:
It tell you that the source is user23. Is there a way to determine who shut down this server?
Thanks
View 4 Replies
View Related
Jun 13, 2007
Hi All,
I got a job which runs every day this T-SQL code:
BACKUP DATABASE [myDB] TO DISK = N'f:BACKUPSDailymyBKUP.bak' WITH NOINIT , NOUNLOAD , NAME = N'mybackup', NOSKIP , STATS = 10, NOFORMAT
It runs just fine but in append Mode (the default one); the bak file is being taped every night, so I would like to overwrite it, in order it not to become huge after a few time, but I can't seem to find a clear way to do this.
Any help or pointing would be appreciated!
Cheers,
Giovanni
View 2 Replies
View Related
Nov 26, 2007
Hello,
While tryign to edit the XML for the rdl , i am stuck it will not allow me to edit and i have to kill the devenv process and open vs again.
I looked through some of the threads and tried apply KB 936971 Hot Fix and I am running into the following error.
The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch."
Did any one come across this. Any assistance would be greatly appreciated
Thanks,
SqlNew
View 1 Replies
View Related
Jul 19, 2007
I understand using sp_procOption procedure we could set procedure for autoexecution every time an instance of SQL Server is started. I would like to find out if there is any way for me to run a procedure before server shuts down.
I am interested to collect statistical data from DMV before SQL Server is restarted due to DMV's transient nature. I am sure some of you would suggest having a job running that collects data from DMV's periodically. But ideally I would like to collect data only once for server uptime.
I would appreciate any suggestion.
Thanks,
Asaf
View 3 Replies
View Related
Feb 20, 2007
Hi
For 15 days now my SQL server service is terminating with the following error
MSSQLSERVER service terminated unexpectedly. It has done this 2 Time(s).
This service terminates and restarts automatically and sometimes doesnt restart we have to mannuly start it again.
Event ID: 7034.
Version Details
Version: MSSQL Server 2000
Service Pack: 3a
Build: 8.0.0.760
I have checked many forums most of them suggest to apply the latest service pack. But the same error has been reported by sites having SP4 also.
Kindly help.
Thank you
wasim
View 2 Replies
View Related
Jul 20, 2005
HII have server MSDE 2000 SP3frequently server stopped, and print in log file information:1)17310 :SqlDumpExceptionHandler: Process 1984 generated fatal exception c0000005EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process.2)17311 :SQL Server is aborting. Fatal exception c0000005 caught.3)The MSSQLSERVER service terminated unexpectedly.
View 2 Replies
View Related
Nov 14, 2007
I have been looking for some information regarding an error I have gotten several times on my production SQL Server 2000 box. Operating System is Windows Server 2003. The Reporting Services version is 8.00.878.00
Error is as follows:
The ReportServer service terminated unexpectedly. It has done this 3 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.
The service restarts normally, or at least seems to, and Reporting Services work with no other issues. Received the error this morning (11/14); last time was on 10/31.
What can I do to prevent this from happening?
Thanks,
Cecily
View 4 Replies
View Related
Jun 19, 2006
Hi,
I am having the same problem as Cherley Vasconcelos mentioned.
I checked for the 2 below mentioned Registery entries as suggested and they are present.
System:
HKEY_USERSS-1-5-18SoftwareMicrosoftWindowsCurrentVersionExplorerUser Shell Folders
User:
HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionExplorerUser Shell Folders
AppData entry is present under the above registry entries with the value of "%USERPROFILE%Application Data
But the problem still exists.
Please Help,
Thanks in advance,
Sonia
The log file is as follows
========================
Microsoft SQL Server 2005 Setup beginning at Mon Jun 19 10:43:41 2006
Process ID : 3476
c:c8e46d550eeabd55d7setup.exe Version: 2005.90.2047.0
Running: LoadResourcesAction at: 2006/5/19 10:43:40
Complete: LoadResourcesAction at: 2006/5/19 10:43:40, returned true
Running: ParseBootstrapOptionsAction at: 2006/5/19 10:43:40
Loaded DLL:c:c8e46d550eeabd55d7xmlrw.dll Version:2.0.3609.0
Complete: ParseBootstrapOptionsAction at: 2006/5/19 10:43:41, returned false
Error: Action "ParseBootstrapOptionsAction" failed during execution. Error information reported during run:
Could not parse command line due to datastore exception.
Source File Name: utillibpersisthelpers.cpp
Compiler Timestamp: Wed Oct 26 16:38:20 2005
Function Name: writeEncryptedString
Source Line Number: 124
----------------------------------------------------------
writeEncryptedString() failed
Source File Name: utillibpersisthelpers.cpp
Compiler Timestamp: Wed Oct 26 16:38:20 2005
Function Name: writeEncryptedString
Source Line Number: 123
----------------------------------------------------------
Error Code: -2146893813
Windows Error Text: Key not valid for use in specified state.
Source File Name: cryptohelpercryptsameusersamemachine.cpp
Compiler Timestamp: Wed Oct 26 16:37:25 2005
Function Name: sqls::CryptSameUserSameMachine::ProtectData
Source Line Number: 50
2148073483
Could not skip Component update due to datastore exception.
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Wed Oct 26 16:37:20 2005
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 130
----------------------------------------------------------
Failed to find property "InstallMediaPath" {"SetupBootstrapOptionsScope", "", "3476"} in cache
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Wed Oct 26 16:37:21 2005
Function Name: SetupBootstrapOptionsScope.InstallMediaPath
Source Line Number: 44
----------------------------------------------------------
No collector registered for scope: "SetupBootstrapOptionsScope"
Running: ValidateWinNTAction at: 2006/5/19 10:43:41
Complete: ValidateWinNTAction at: 2006/5/19 10:43:41, returned true
Running: ValidateMinOSAction at: 2006/5/19 10:43:41
Complete: ValidateMinOSAction at: 2006/5/19 10:43:41, returned true
Running: PerformSCCAction at: 2006/5/19 10:43:41
Complete: PerformSCCAction at: 2006/5/19 10:43:41, returned true
Running: ActivateLoggingAction at: 2006/5/19 10:43:41
Error: Action "ActivateLoggingAction" threw an exception during execution. Error information reported during run:
Datastore exception while trying to write logging properties.
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Wed Oct 26 16:37:20 2005
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 130
----------------------------------------------------------
Failed to find property "primaryLogFiles" {"SetupStateScope", "", ""} in cache
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Wed Oct 26 16:37:21 2005
Function Name: SetupStateScope.primaryLogFiles
Source Line Number: 44
----------------------------------------------------------
No collector registered for scope: "SetupStateScope"
00F8CFC0Unable to proceed with setup, there was a command line parsing error. : 2
Error Code: 0x80070002 (2)
Windows Error Text: The system cannot find the file specified.
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Wed Oct 26 16:37:21 2005
Function Name: SetupBootstrapOptionsScope.InstallMediaPath
Source Line Number: 44
Class not registered.
Failed to create CAB file due to datastore exception
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Wed Oct 26 16:37:20 2005
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 130
----------------------------------------------------------
Failed to find property "HostSetup" {"SetupBootstrapOptionsScope", "", "3476"} in cache
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Wed Oct 26 16:37:21 2005
Function Name: SetupBootstrapOptionsScope.HostSetup
Source Line Number: 44
----------------------------------------------------------
No collector registered for scope: "SetupBootstrapOptionsScope"
Message pump returning: 2
View 1 Replies
View Related
Nov 20, 2007
While trying to download SQL Server 2005 Express SP2 I receive the following error message: 'SQL server Setup Unexpectedly dailed. For more information review the Setup memory log file in %Program Files%Microsoft SQL Server90Setup BootstrapLOGSummary.txt'.
That log file simply contains the text:
Microsoft SQL Server 2005 9.00.3042.00
==============================
OS Version : Microsoft Windows XP Professional Service Pack 2 (Build 2600)
In the Files folder under log, a text file has been created with the following data:
Microsoft SQL Server 2005 Setup beginning at Mon Nov 19 20:30:29 2007
Process ID : 4648
c:fc359db69b5e5a0ff927be3c2esetup.exe Version: 2005.90.3042.0
Running: LoadResourcesAction at: 2007/10/19 20:30:28
Complete: LoadResourcesAction at: 2007/10/19 20:30:28, returned true
Running: ParseBootstrapOptionsAction at: 2007/10/19 20:30:28
Loaded DLL:c:fc359db69b5e5a0ff927be3c2exmlrw.dll Version:2.0.3609.0
Complete: ParseBootstrapOptionsAction at: 2007/10/19 20:30:29, returned false
Error: Action "ParseBootstrapOptionsAction" failed during execution. Error information reported during run:
Could not parse command line due to datastore exception.
Source File Name: utillibpersisthelpers.cpp
Compiler Timestamp: Wed Jun 14 16:30:14 2006
Function Name: writeEncryptedString
Source Line Number: 124
----------------------------------------------------------
writeEncryptedString() failed
Source File Name: utillibpersisthelpers.cpp
Compiler Timestamp: Wed Jun 14 16:30:14 2006
Function Name: writeEncryptedString
Source Line Number: 123
----------------------------------------------------------
Error Code: -2146893813
Windows Error Text: Key not valid for use in specified state.
Source File Name: cryptohelpercryptsameusersamemachine.cpp
Compiler Timestamp: Wed Jun 14 16:28:04 2006
Function Name: sqls::CryptSameUserSameMachine:rotectData
Source Line Number: 50
2148073483
Could not skip Component update due to datastore exception.
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:27:59 2006
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 130
----------------------------------------------------------
Failed to find property "InstallMediaPath" {"SetupBootstrapOptionsScope", "", "4648"} in cache
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:28:01 2006
Function Name: SetupBootstrapOptionsScope.InstallMediaPath
Source Line Number: 44
----------------------------------------------------------
No collector registered for scope: "SetupBootstrapOptionsScope"
Running: ValidateWinNTAction at: 2007/10/19 20:30:29
Complete: ValidateWinNTAction at: 2007/10/19 20:30:29, returned true
Running: ValidateMinOSAction at: 2007/10/19 20:30:29
Complete: ValidateMinOSAction at: 2007/10/19 20:30:29, returned true
Running: PerformSCCAction at: 2007/10/19 20:30:29
Complete: PerformSCCAction at: 2007/10/19 20:30:29, returned true
Running: ActivateLoggingAction at: 2007/10/19 20:30:29
Error: Action "ActivateLoggingAction" threw an exception during execution. Error information reported during run:
Datastore exception while trying to write logging properties.
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:27:59 2006
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 130
----------------------------------------------------------
Failed to find property "primaryLogFiles" {"SetupStateScope", "", ""} in cache
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:28:01 2006
Function Name: SetupStateScope.primaryLogFiles
Source Line Number: 44
----------------------------------------------------------
No collector registered for scope: "SetupStateScope"
00DFCFC0Unable to proceed with setup, there was a command line parsing error. : 2
Error Code: 0x80070002 (2)
Windows Error Text: The system cannot find the file specified.
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:28:01 2006
Function Name: SetupBootstrapOptionsScope.InstallMediaPath
Source Line Number: 44
Class not registered.
Can anyone give me some advice on what I need to correct in order to be able to install SQl server Express? Thanks very much in advance.
View 2 Replies
View Related
Jun 14, 2006
I´m running WinXP SP2 with 1GB RAM, dotNET 2.0. and a previous install of SQL Server 2000. I have tried to install SQL Server 2005 Express and it fails early in the installation: "SQL Server Setup unexpectedly failed. For more information, review the Setup summary log file...". The log file is: (!)
Microsoft SQL Server 2005 9.00.1399.06
==============================
OS Version : Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Time : Wed Jun 14 10:27:51 2006
I have tried named instances, reinstall SQL Server 2000, search readme, kb, forums about the problem....nothing
Help, please.
View 10 Replies
View Related
Nov 5, 2007
Hi,
I am running two jobs background using SQL agent. There was a power shut down and the two job i was running in back groung were cancelled leaving the below message
The job was stopped prior to completion by Shutdown Sequence 0.
Can any one tell me why this happened although I am running them in back ground.
I am not sure where the servers are located and if they are located in the same bulding .. do u think it is bcoz of tis power shut down only?
View 6 Replies
View Related
Oct 7, 2015
I know that there was huge tempdb usage and may be the disk was full but SQL server is not suppose to restart in this case.What could be the reason behind this? SQL server restarted and is currently up and running.We are using SQL server 2008 SP3
View 10 Replies
View Related
Jul 12, 2007
we run ssrs 2005 sp2 hotfix applied - how do we troubleshoot a problem where the report server service is stopping unexpectedly several times a day. When this happens please tell me what happens to the reports that are currently running. I believe that
1) a current subscription that is running will fail - not sure if it will try to restart itself 3 times or not
2) connection to the report server db cannot be made when that occurs
this is a huge problem for us and we dont know what is causing it or how to fix it. Any suggestions would help. I can tell you that our customers flood the server with subscriptions
View 2 Replies
View Related
Jan 24, 2007
MSSQLServer service terminated unexpectedly
We are running SQL Server 2000 with SP4. This server has been running for the past six months with no SQL server problems. A Max of 10 users have access to the application running on this server.
The Event Viewer Log shows the
Source: MSSQLServer
Category: (2)
Type: Error
EventID: 17052
Description: The MSSQLSERVER service terminated unexpectedly.
No other error messages were seen in the SQL server log or windows event viewer.
The time when it terminated was not during peak load/activity.
The server is Windows 2003 with SP1. Any help would be appreciated.
View 5 Replies
View Related
Mar 18, 2008
When I upload my website on to server I have the following error: Could not open new database 'edmer-kiem.qsh.es_b5711d30-4f2a-4151-a958-9f63adb9c1bf'. CREATE DATABASE is aborted.Cannot
attach the file
'H:HomeWebsqsh.esedmer-kiem_79170098-49d1-496b-b8ac-24e9f04837a4wwwApp_Dataedmer_kiem.mdf'
as database 'edmer-kiem.qsh.es_b5711d30-4f2a-4151-a958-9f63adb9c1bf'.File activation failure. The physical file name "C:Inetpubwwwrootedmer_kiemApp_Dataedmer_kiem_log.ldf" may be incorrect.The log cannot be rebuilt because the database was not cleanly shut down. I have searched forums but I could not solve it.. How can I shut down database on the server?Please help..
View 1 Replies
View Related
Aug 8, 2007
Pls help me on this issue...
The min reqt olny says Windows XP Service Pack 2. So, whether it is Pro or Home I assume this Edition will run. MY system is XP Home SP2 with 2GB RAM and Dual Core Intel Processor. Is this the problem? There is no error displayed on the summary.txt and I do not know how to read the log file. Pls help... Or do I need to upgrade to XP Pro?
This is the log file details:
Microsoft SQL Server 2005 Setup beginning at Wed Aug 08 17:15:25 2007
Process ID : 3956
c:d9bc063efa643d3b71e3setup.exe Version: 2005.90.1399.0
Running: LoadResourcesAction at: 2007/7/8 17:15:24
Complete: LoadResourcesAction at: 2007/7/8 17:15:24, returned true
Running: ParseBootstrapOptionsAction at: 2007/7/8 17:15:24
Loaded DLL:c:d9bc063efa643d3b71e3xmlrw.dll Version:2.0.3604.0
Complete: ParseBootstrapOptionsAction at: 2007/7/8 17:15:25, returned false
Error: Action "ParseBootstrapOptionsAction" failed during execution. Error information reported during run:
Could not parse command line due to datastore exception.
Source File Name: utillibpersisthelpers.cpp
Compiler Timestamp: Fri Jul 29 01:13:55 2005
Function Name: writeEncryptedString
Source Line Number: 124
----------------------------------------------------------
writeEncryptedString() failed
Source File Name: utillibpersisthelpers.cpp
Compiler Timestamp: Fri Jul 29 01:13:55 2005
Function Name: writeEncryptedString
Source Line Number: 123
----------------------------------------------------------
Error Code: 0x80070002 (2)
Windows Error Text: The system cannot find the file specified.
Source File Name: cryptohelpercryptsameusersamemachine.cpp
Compiler Timestamp: Mon Jun 13 14:30:00 2005
Function Name: sqls::CryptSameUserSameMachine:rotectData
Source Line Number: 50
2
Could not skip Component update due to datastore exception.
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:49 2005
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 130
----------------------------------------------------------
Failed to find property "InstallMediaPath" {"SetupBootstrapOptionsScope", "", "3956"} in cache
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:50 2005
Function Name: SetupBootstrapOptionsScope.InstallMediaPath
Source Line Number: 44
----------------------------------------------------------
No collector registered for scope: "SetupBootstrapOptionsScope"
Running: ValidateWinNTAction at: 2007/7/8 17:15:25
Complete: ValidateWinNTAction at: 2007/7/8 17:15:25, returned true
Running: ValidateMinOSAction at: 2007/7/8 17:15:25
Complete: ValidateMinOSAction at: 2007/7/8 17:15:25, returned true
Running: PerformSCCAction at: 2007/7/8 17:15:25
Complete: PerformSCCAction at: 2007/7/8 17:15:25, returned true
Running: ActivateLoggingAction at: 2007/7/8 17:15:25
Error: Action "ActivateLoggingAction" threw an exception during execution. Error information reported during run:
Datastore exception while trying to write logging properties.
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:49 2005
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 130
----------------------------------------------------------
Failed to find property "primaryLogFiles" {"SetupStateScope", "", ""} in cache
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:50 2005
Function Name: SetupStateScope.primaryLogFiles
Source Line Number: 44
----------------------------------------------------------
No collector registered for scope: "SetupStateScope"
02AFCFC4Unable to proceed with setup, there was a command line parsing error. : 2
Error Code: 0x80070002 (2)
Windows Error Text: The system cannot find the file specified.
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:50 2005
Function Name: SetupBootstrapOptionsScope.InstallMediaPath
Source Line Number: 44
Class not registered.
Failed to create CAB file due to datastore exception
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:49 2005
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 130
----------------------------------------------------------
Failed to find property "HostSetup" {"SetupBootstrapOptionsScope", "", "3956"} in cache
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:50 2005
Function Name: SetupBootstrapOptionsScope.HostSetup
Source Line Number: 44
----------------------------------------------------------
No collector registered for scope: "SetupBootstrapOptionsScope"
Message pump returning: 2
View 6 Replies
View Related
Nov 17, 2007
I tried to load a fixed width flat file with around 300,000 rows. However, only the first 8xxxx rows were loaded to the destineation table and the rest row were loading blank records. There was no error message showing during package execution. I've tried to split the file in half and the result was the same. So it wasn't the data file problem.
Would there be any buffering issue I need to cater for inside the package? Thanks!
View 10 Replies
View Related
Apr 2, 2007
When i try to install, the filed are extracted and then i get this error message:
SQL Server Setup unexpectedly failed. For more information, review the Setup summery log file in %ProgramFiles%Microsoft SQL Server90Setup BootstrapLOGSummary.txt
I open the file and this is all i get:
Microsoft SQL Server 2005 9.00.3042.00
==============================
OS Version : Microsoft Windows XP Professional
Service Pack 2 (Build 2600)
Time : Mon Apr 02 15:31:10 2007
I looked in this forum at others peoples threads and it seems as if they all have a lot larger Summary.txt file. I never had any other verson of SQL Server installed on this computer and i just uninstalled .net 2.0 framework and reinstalled it.
My computer runs Windows XP Pro with SP 2, AMD Athlon 64 Processor 3500+ 2.20 GHz, 1.00GB of RAM.
Anyone have any clue why the installation wont even start?
View 9 Replies
View Related
Nov 17, 2006
if i get this message one more time I am going to put my fist through my monitor
View 114 Replies
View Related
Aug 31, 2015
Is there a way to get access to the files on the shared drive from either of the nodes when the SQL Cluster is shut down?
It doesn't look like there is, but hoping there is some trick. I see how it can be done with a Windows Cluster but not a SQL Cluster.
View 4 Replies
View Related
Oct 5, 2007
Maybe I am missing something completely obvious but as far as I can tell I aren't!
I am trying to simply pass a parameter to a stored proc to return results. Easy? So I thought so too...
This is my stored procedure below (in it's ALTER PROCEDURE form):
ALTER PROCEDURE [dbo].[spd_Tester]
-- Add the parameters for the stored procedure here
@Check int
AS
BEGIN
SELECT * FROM tblPerson
WHERE PersonID = @Check
END
Now I know this is a SQL Server forum but I figure anyone who reads this probably does some application programming as well, so here is the code that calls this. It's in VBA using Access 2003. I figure the error is being returned from SQL Server Express so that's why I have come to this forum instead of an Access forum! I could be wrong though...
Here is the code that calls this:
Dim rs As ADODB.Recordset
Dim cmd As ADODB.Command
Set cmd = New ADODB.Command
'Run sql command
With cmd
.ActiveConnection = CurrentProject.Connection
.CommandText = "dbo.spd_Tester"
.Parameters.Append .CreateParameter("@Check", adInteger, adParamInput, , Me.txtFirstName)
'Execute, return recordset
Set rs = .Execute
End With
Now I figure this should work. However, I get the error "Procedure or function 'spd_Tester' expects parameter '@Check', which was not supplied." when I execute the procedure with the number 1 in the txtFirstName text box.
Can someone tell me what I am doing wrong?? The tblPerson table has data in it, if I run the select from a query window, specifying a value for @Check, it works just fine.
Thanks in advance!
View 4 Replies
View Related
Jan 22, 2008
I installed the hotfix available at support.microsoft.com/kb/936971 and even rebooted the server, but I am still getting the error. I am working on a Windows 2003 server with SQL Server 2005 (and reporting services). I am not trying to publish any reports using SSRS. I'm just working on designs and saving them. Any help for this at this point?
Leigh
View 1 Replies
View Related
Jul 9, 2006
Hi,
I have found that when I'm debugging a custom component in BIDS that I've created in another instance of Visual Studio, every time I rebuild the component I have to shutdown and restart BIDS and then reattach to the BIDS process. Which is pretty time consuming... And if I find a small error in my custom component when debugging then I don't seem to be allowed to make any changes to the code unless I stop debugging and go through the process above.
Am I missing something here? Or do I really have to manually go through these steps every time I want to change code in the component I'm debugging?
Can I automate the process with MSBuild or NAnt? If so, is there an example of this anywhere?
Thanks in advance,
Lawrie.
View 1 Replies
View Related
Oct 3, 2007
I have a fairly simple data flow task that loads data from one table (OLE DB Source) into another table (OLE DB Destination). The data type for one of the pairs of columns is nVarChar(120) and it contains version information that looks like a decimal. When I run the export, the destination has a trailing zero added after the decimal point as if it were a numeric column which invalidates our comparisons (string 1.0 is not the same as string 1.00). There is no cast or convert done to this column, it is a straight copy. Any ideas what could be causing this or how to fix?
View 6 Replies
View Related
Jul 9, 2006
While I have learned a lot from this thread I am still basically confused about the issues involved.
.I wanted to INSERT a record in a parent table, get the Identity back and use it in a child table. Seems simple.
To my knowledge, mine would be the only process running that would update these tables. I was told that there is no guarantee, because the OLEDB provider could write the second destination row before the first, that the proper parent-child relationship would be generated as expected. It was recommended that I create my own variable in memory to hold the Identity value and use that in my SSIS package.
1. A simple example SSIS .dts example illustrating the approach of using a variable for identity would be helpful.
2. Suppose I actually had two processes updating these tables, running at the same time. Then it seems the "variable" method will also have its problems. Is there a final solution other than locking the tables involved prior to updating them or doing something crazy like using a GUID for the primary key!
3. We have done the type of parent-child inserts I originally described from t-sql for years without any apparent problems. (Maybe we were just lucky.) Is the entire issue simply a t-sql one or does SSIS add a layer of complexity beyond t-sql that needs to be addressed?
TIA,
Barkingdog
View 10 Replies
View Related
Jun 30, 2006
I want to insert a new record into a table with an Identity field and return the new Identify field value back to the data stream (for later insertion as a foreign key in another table).
What is the most direct way to do this in SSIS?
TIA,
barkingdog
P.S. Or should I pass the identity value back in a variable and not make it part of the data stream?
View 12 Replies
View Related
