Hello,
I'm running a query against a tbl1 which has values ID 101, 102, 103, 104
select * from tbl1 where Id < 100
The Id column is identity and only inserts & select are made in this table
When I run this select statement I get 101, 104
I closed the connection and ran again
I get 101, 102, 103, 104
This happened twice to me
Is there a bug in SQL Server, I'm running MS SQL Server 2000 Enterprise Edition
Any help is appreciated
Thanks
Sejal
I want to output the @@Identity value from a stored procedure which inserts some values into a table. The procedure is below, but I can't get it to work ????
Thanks in Advance
--Declare @Test int
--Exec spIdentityTest @Test output
CREATE PROCEDURE dbo.spIdentityTest
@intID int output
AS
Begin
INSERT INTO tblTest (myDescription1, myDescription2, myDescription3, myDescription4)
VALUES ('Text1', 'Text2', 'Text3', 'Text3')
RETURN --@@Identity
set @intID = @@Identity
print @intID
END
I have a stored proc that will insert a new row into a table
with the values of the parameters you pass in. I need it to
return the value of the ID that's generated by an Identity
column once the row has been written and that value has
been generated. If I just do a SELECT Max(), I could
accidentally grab a row written by someone else, right?
My current sp looks like this:
CREATE PROCEDURE sp_SaveNewLabel
-- @LabelID int output
@LabelType int
, @Logo int
, @Field01 char(30)
AS
INSERT INTO tbLabel
(LabelType
, Logo
, Field01)
VALUES
(@LabelType
, @Logo
, @PrintCC
, @Field01)
How do I grab the new LabelID (the column is int, Identity) and return
it from the stored proc. Any help would be greatly appreciated...
Zack
I have a process to rollover prior quarter data to new quarter in a table.
For example, i have a table with (col1, col2, year, qtr) with data like ( Note: col1 is identity(1,1) )
1,'today',2014,1
2,'tomorrow,2014,1
3,'friday',2014,1
Now when i run my process, above 3 records will be rolled over new quarter 2014 Q2 and the table will be like
1,'today',2014,1
2,'tomorrow,2014,1
3,'friday',2014,1
4,'today',2014,2
5,'tomorrow,2014,2
6,'friday',2014,2
Row 1 with identity 1 has rolled over to new quarter row 4 with identity 4 ( qtr fields are changed )
Row 2 with identity 2 has rolled over to new quarter row 5 with identity 5. Same with last row as well.
Here, i have another table called "ident_map" with columns like (old identity, new identity ) and during rollover i am supposed to load ident_map table with old and new identity. So after rollover is complete, ident_map table should look like
1,4
2,5
3,6
I know using output clause I can capture the new identity values. 4,5,6 in this case. But is there any way to capture both old identity and new identity during rollover so that i can load the ident_map table with old and new identity.
While I have learned a lot from this thread I am still basically confused about the issues involved.
.I wanted to INSERT a record in a parent table, get the Identity back and use it in a child table. Seems simple.
To my knowledge, mine would be the only process running that would update these tables. I was told that there is no guarantee, because the OLEDB provider could write the second destination row before the first, that the proper parent-child relationship would be generated as expected. It was recommended that I create my own variable in memory to hold the Identity value and use that in my SSIS package.
1. A simple example SSIS .dts example illustrating the approach of using a variable for identity would be helpful.
2. Suppose I actually had two processes updating these tables, running at the same time. Then it seems the "variable" method will also have its problems. Is there a final solution other than locking the tables involved prior to updating them or doing something crazy like using a GUID for the primary key!
3. We have done the type of parent-child inserts I originally described from t-sql for years without any apparent problems. (Maybe we were just lucky.) Is the entire issue simply a t-sql one or does SSIS add a layer of complexity beyond t-sql that needs to be addressed?
TIA,
Barkingdog
I want to insert a new record into a table with an Identity field and return the new Identify field value back to the data stream (for later insertion as a foreign key in another table).
What is the most direct way to do this in SSIS?
TIA,
barkingdog
P.S. Or should I pass the identity value back in a variable and not make it part of the data stream?
While using Aggregate Transformation to group one column,the rows of output sometimes larger than the rows returned by a T-SQL statement via SSMS.
For example,the output of the Aggregate Transformation may be 960216 ,but the
'Select Count(Orderid) From ... Group By ***' T-SQL Statement returns 96018*.
I'm sure the Group By of the Aggregate Transformation is right!
But ,when I set the "keyscale" property of the transformation,the results match!
In my opinion,the "keyscale" property will jsut affects the performance of the transformaiton,but not the result of the transformation.
Thanks for your advice.
Inside some TSQL programmable object (a SP/or a query in Management Studio)I have a parameter containing the name of a StoreProcedure+The required Argument for these SP. (for example it's between the brackets [])
EX1 : @SPToCall : [sp_ChooseTypeOfResult 'Water type']
EX2 : @SPToCall : [sp_ChooseTypeOfXMLResult 'TABLE type', 'NODE XML']
EX3 : @SPToCall : [sp_GetSomeResult]
I can't change thoses SP, (and i don't have a nice output param to cach, as i would need to change the SP Definition)All these SP 'return' a 'select' of 1 record the same datatype ie: NVARCHAR. Unfortunately there is no output param (it would have been so easy otherwise. So I am working on something like this but I 'can't find anything working
DECLARE @myFinalVarFilledWithCachedOutput
NVARCHAR(MAX);
DECLARE @SPToCall NVARCHAR(MAX) = N'sp_ChooseTypeOfXMLResult
''TABLE type'', ''NODE XML'';'
DECLARE @paramsDefintion = N'@CatchedOutput NVARCHAR(MAX) OUTPUT'
[code]...
Hi
I have Lookup task to determine if source data should be updated to or insert to the customer table. After Lookup task, the Error Output pipeline will redirect to insert new data to the table and the Output pipeline will update customer table. But these two tasks will be processing at the same time which causes stall on the process. Never end.....
The job is similiart to what Slow Changing Dimention does but it won't update the table at the same time.
What can I do to avoid such situation?
Thanks in advance,
JD
I am working on an OLAP modeled database.
I have a Lookup Transformation that matches the natural key of a dimension member and returns the dimension key for that member (surrogate key pipeline stuff).
I am using an OLE DB Command as the Error flow of the Lookup Transformation to insert an "Inferred Member" (new row) into a dimension table if the Lookup fails.
The OLE DB Command calls a stored procedure (dbo.InsertNewDimensionMember) that inserts the new member and returns the key of the new member (using scope_identity) as an output.
What is the syntax in the SQL Command line of the OLE DB Command Transformation to set the output of the stored procedure as an Output Column?
I know that I can 1) add a second Lookup with "Enable memory restriction" on (no caching) in the Success data flow after the OLE DB Command, 2) find the newly inserted member, and 3) Union both Lookup results together, but this is a large dimension table (several million rows) and searching for the newly inserted dimension member seems excessive, especially since I have the ID I want returned as output from the stored procedure that inserted it.
Thanks in advance for any assistance you can provide.
I have table of three column first column is an ID column. However at creation of the table i have not set this column to auto increment. Then i have copied 50 rows in another table to this table then set the ID column values to zero.
Now I have changed the ID column to auto increment seed=1 increment=1 but the problem is i couldn't figure out how to update this ID column with zero value set to each row with this auto increment values so the ID column would have values from 1-50. Is there a away to do this?
Ok,I just need to know how to get the last record inserted by the highestIDENTITY number. Even if the computer was rebooted and it was twoweeks ago. (Does not have to do with the session).Any help is appreciated.Thanks,Trint
View 2 Replies View RelatedHi!Server info -Win2K3 Server +SP1 with 1 GB Memory and 1.5 GB Virtual MemorySQL Server 2000 Enterprise Edition + SP3 running on this.Required result -Create a SQL Script that will contain a set of create, update, insert& delete statements (about 17500 lines including blank lines) thatcan be run on different databases seperatelyHow we do this -We have a SP - that creates a temporary table and then calls anotherSP that actually populates the temporary table created by the first SP*Samples of both SPs are below -PROBLEMThe result is directed to a file -However when the query is run it runs through the entire script but'Jumbles' the outputRunning the same scripts on a copy of the database on other machineswork fine and the size of the outfiles is exactly the sameI have increased the page size to 2.5 GB and restarted the server.Running the sp now generated the correct output a few times but gotjumbled as before after a few more users logged in and activity on theserver increased.Another interesting point is that the output is jumbled exactly thesame way each time. It seems the sql executes correctly and writesthe output in chunks only writting the chunks out of sequence - butin the same sequence each time.e.g. of expected resultInsert into Table1Values x, y, z, 1, 2Insert into Table1Values q, s, g, 3, 4Insert into Table1Values c, d, e, 21, 12....Insert into Table2Values ...Insert into Table3Values ................Update RefGenSet Last = 1234Where RefGenRef = 1JUMBLED OUTPUTInsert into Table1Values x, y, z, 1, 2Insert into Table1Values q, s, g, 3, 4Insert into Table1Values c, d, e, 21, 12....Insert into Table2Values ...Insert into Table2Values ...Values ...Update RefGenSet Last = 1234Where RefGenRef = 1Insert into Table3Values ................Insert into Table1Values c, d, e, 21, 12....Insert into Table2----------------------------------------Sample of First Script - STATDATA_RSLT**************************************SET QUOTED_IDENTIFIER ONGOSET ANSI_NULLS ONGOSET NOCOUNT ONGOCREATE PROCEDURE StatData_rsltASCREATE TABLE #tbl_Script(ScriptText varchar(4000))EXEC TestStatData_intSELECT t.ScriptTextFROM #tbl_Script tGOSET QUOTED_IDENTIFIER OFFGOSET ANSI_NULLS ONGO*******************************************Sample of CALLED SP - TestStatData_int*******************************************SET QUOTED_IDENTIFIER ONGOSET ANSI_NULLS ONGOCREATE PROCEDURE TestStatData_intASDECLARE @AttrRef int,@TestID int,@PrtTestRef int,@AttrType tinyint,@EdtblSw tinyint,@NmValRef int,@SrtTypeRef int,@AttrStr varchar(20),@TestStr varchar(20),@PrtTestStr varchar(20),@AttrTypeStr varchar(20),@EdtblStr varchar(20),@NmValStr varchar(20),@SrtTypeStr varchar(20),@TestRef int,@Seq int,@PrtRef int,@Value varchar(255),@TermDate datetime,@AttrID int,@DefSw tinyint,@WantSw tinyint,@TestRefStr varchar(20),@SeqStr varchar(20),@PrtStr varchar(20),@TermDateStr varchar(255),@AttrIDStr varchar(20),@DefStr varchar(20),@WantStr varchar(20),@LanRef int,@LanStr varchar(20),@Code varchar(20),@Desc varchar(255),@MultiCode varchar(20),@MultiDesc varchar(255),@InhSw tinyint,@InhStr varchar(20),@InhFrom int,@InhFromStr varchar(20),@Lan_TestRef int,@ActSw tinyint,@ActSwStr varchar(20)SELECT @Lan_TestRef = dbo.fn_GetTestRef('Lan')INSERT INTO #tbl_ScriptVALUES('')-- Create tablesINSERT INTO #tbl_ScriptVALUES ('CREATE TABLE #tbl_Test (AttrRef int, TestID int , PrtTestRefint, AttrType tinyint, EdtblSw tinyint, NmValRef int, SrtTypeRefint)')INSERT INTO #tbl_ScriptVALUES ('')INSERT INTO #tbl_ScriptVALUES('CREATE TABLE #tbl_TestAttr(AttrRef int, TestRef int, Seq int,PrtRef int, AttrType tinyint, Value varchar(255), TermDate datetime,AttrID int, DefSw tinyint, WantSw tinyint, ActSw tinyint)')INSERT INTO #tbl_ScriptVALUES ('')INSERT INTO #tbl_ScriptVALUES ('CREATE TABLE #tbl_AttrName(AttrRef int, LanRef int, Codevarchar(20), [Desc] varchar(255), MultiCode varchar(20), MultiDescvarchar(255), InhSw tinyint, InhFrom int)')INSERT INTO #tbl_ScriptVALUES ('')-- insert Test valuesDECLARE Test_cursor CURSOR FORSELECT l.AttrRef, l.TestID, l.PrtTestRef, l.AttrType, l.EdtblSw,l.NmValRef, l.SrtTypeRefFROM Test lOPEN Test_cursorFETCH NEXT FROM Test_cursorINTO @AttrRef, @TestID, @PrtTestRef, @AttrType, @EdtblSw, @NmValRef,@SrtTypeRefWHILE @@FETCH_STATUS = 0BEGINSELECT @AttrStr = ISNULL(CAST(@AttrRef as varchar), 'NULL'),@TestStr = ISNULL(CAST(@TestID as varchar), 'NULL'),@PrtTestStr = ISNULL(CAST(@PrtTestRef as varchar), 'NULL'),@AttrTypeStr = ISNULL(CAST(@AttrType as varchar), 'NULL'),@EdtblStr = ISNULL(CAST(@EdtblSw as varchar), 'NULL'),@NmValStr = ISNULL(CAST(@NmValRef as varchar), 'NULL'),@SrtTypeStr = ISNULL(CAST(@SrtTypeRef as varchar), 'NULL')INSERT INTO #tbl_ScriptVALUES ('INSERT INTO #tbl_Test(AttrRef, TestID, PrtTestRef,AttrType,EdtblSw, NmValRef, SrtTypeRef)')INSERT INTO #tbl_ScriptVALUES ('VALUES ( ' + @AttrStr + ', ' + @TestStr + ', ' +@PrtTestStr+ ', ' + @AttrTypeStr + ', ' + @EdtblStr + ', ' + @NmValStr + ', ' +@SrtTypeStr + ')')INSERT INTO #tbl_ScriptVALUES ('')FETCH NEXT FROM Test_cursorINTO @AttrRef, @TestID, @PrtTestRef, @AttrType, @EdtblSw, @NmValRef,@SrtTypeRefENDCLOSE Test_cursorDEALLOCATE Test_cursorDECLARE TestAttr_cursor CURSOR FORSELECT le.AttrRef, le.TestRef, le.Seq, le.PrtRef, le.AttrType,le.Value,le.TermDate, le.AttrID, le.DefSw, le.WantSw, le.ActSwFROM TestAttr leWHERE le.WantSw = 1AND le.ActSw = 1OPEN TestAttr_cursorFETCH NEXT FROM TestAttr_cursorINTO @AttrRef, @TestRef, @Seq, @PrtRef, @AttrType, @Value,@TermDate, @AttrID, @DefSw, @WantSw, @ActSwWHILE @@FETCH_STATUS = 0BEGINSELECT @AttrStr = ISNULL(CAST(@AttrRef as varchar), 'NULL'),@TestRefStr = ISNULL(CAST(@TestRef as varchar), 'NULL'),@SeqStr = ISNULL(CAST(@Seq as varchar), 'NULL'),@PrtStr = ISNULL(CAST(@PrtRef as varchar), 'NULL'),@AttrTypeStr = ISNULL(CAST(@AttrType as varchar), 'NULL'),@Value = ISNULL(@Value, 'NULL'),@TermDateStr = ISNULL(CAST(@TermDate as varchar), 'NULL'),@AttrIDStr = ISNULL(CAST(@AttrID as varchar), 'NULL'),@DefStr = ISNULL(CAST(@DefSw as varchar), 'NULL'),@WantStr = ISNULL(CAST(@WantSw as varchar), 'NULL'),@ActSwStr = ISNULL(CAST(@ActSw as varchar), '1')SELECT @Value = '''' + @Value + ''''WHERE @Value <> 'NULL'INSERT INTO #tbl_ScriptVALUES ('INSERT INTO #tbl_TestAttr(AttrRef, TestRef, Seq, PrtRef,AttrType, Value, TermDate, AttrID, DefSw, WantSw, ActSw)')INSERT INTO #tbl_ScriptVALUES ('VALUES (' + @AttrStr + ', ' + @TestRefStr + ', ' +@SeqStr+ ', ' + @PrtStr + ', ' + @AttrTypeStr + ', ' + @Value + ', ' +@TermDateStr + ', ' + @AttrIDStr + ', ' + @DefStr + ', ' + @WantStr+', '+ @ActSwStr + ')')INSERT INTO #tbl_ScriptVALUES ('')FETCH NEXT FROM TestAttr_cursorINTO @AttrRef, @TestRef, @Seq, @PrtRef, @AttrType, @Value,@TermDate, @AttrID, @DefSw, @WantSw, @ActSwENDCLOSE TestAttr_cursorDEALLOCATE TestAttr_cursorDECLARE AttrName_cursor CURSOR FORSELECT e.AttrRef, e.LanRef, e.Code, e.[Desc], e.MultiCode,e.MultiDesc, e.InhSw, e.InhFromFROM AttrName e, TestAttr leWHERE e.LanRef = 0AND e.AttrRef = le.AttrRefAND le.WantSw = 1AND le.ActSw = 1OPEN AttrName_cursorFETCH NEXT FROM AttrName_cursorINTO @AttrRef, @LanRef, @Code, @Desc, @MultiCode,@MultiDesc, @InhSw, @InhFromWHILE @@FETCH_STATUS = 0BEGINSELECT @AttrStr = ISNULL(CAST(@AttrRef as varchar), 'NULL'),@LanStr = ISNULL(CAST(@LanRef as varchar), 'NULL'),@Code = ISNULL(@Code, 'NULL'),@Desc = ISNULL(@Desc, 'NULL'),@MultiCode = ISNULL(@MultiCode, 'NULL'),@MultiDesc = ISNULL(@MultiDesc, 'NULL'),@InhStr = ISNULL(CAST(@InhSw as varchar), 'NULL'),@InhFromStr = ISNULL(CAST(@InhFrom as varchar), 'NULL')SELECT @Code = REPLACE(@Code, '''',''''''),@Desc = REPLACE(@Desc, '''','''''') ,@MultiCode = REPLACE(@MultiCode, '''','''''') ,@MultiDesc = REPLACE(@MultiDesc, '''','''''')INSERT INTO #tbl_ScriptVALUES ('INSERT INTO #tbl_AttrName(AttrRef, LanRef, Code, [Desc],MultiCode, MultiDesc, InhSw, InhFrom)')INSERT INTO #tbl_ScriptVALUES ('VALUES (' + @AttrStr + ', ' + @LanStr + ', ''' + @Code +''', ''' + @Desc + ''', ''' + @MultiCode + ''', ''' + @MultiDesc +''',' + @InhStr + ', ' + @InhFromStr + ')')INSERT INTO #tbl_ScriptVALUES ('')FETCH NEXT FROM AttrName_cursorINTO @AttrRef, @LanRef, @Code, @Desc, @MultiCode,@MultiDesc, @InhSw, @InhFromENDCLOSE AttrName_cursorDEALLOCATE AttrName_cursor-- Do update TestAttr dataINSERT INTO #tbl_ScriptVALUES ('UPDATE le')INSERT INTO #tbl_ScriptVALUES ('SET')INSERT INTO #tbl_ScriptVALUES (' le.TestRef = t.TestRef,')INSERT INTO #tbl_ScriptVALUES (' le.PrtRef = t.PrtRef,')INSERT INTO #tbl_ScriptVALUES (' le.AttrType = t.AttrType,')INSERT INTO #tbl_ScriptVALUES (' le.Value = t.Value,')INSERT INTO #tbl_ScriptVALUES (' le.TermDate = t.TermDate,')INSERT INTO #tbl_ScriptVALUES (' le.AttrID = t.AttrID,')INSERT INTO #tbl_ScriptVALUES (' le.DefSw = t.DefSw,')INSERT INTO #tbl_ScriptVALUES (' le.WantSw = t.WantSw,')INSERT INTO #tbl_ScriptVALUES (' le.ActSw = t.ActSw')INSERT INTO #tbl_ScriptVALUES ('FROM TestAttr le, #tbl_TestAttr t')INSERT INTO #tbl_ScriptVALUES ('WHERE le.AttrRef = t.AttrRef')INSERT INTO #tbl_ScriptVALUES ('')-- Update AttrNameINSERT INTO #tbl_ScriptVALUES ('UPDATE en')INSERT INTO #tbl_ScriptVALUES ('SET')INSERT INTO #tbl_ScriptVALUES (' en.Code = te.Code,')INSERT INTO #tbl_ScriptVALUES (' en.[Desc] = te.[Desc],')INSERT INTO #tbl_ScriptVALUES (' en.MultiCode = te.MultiCode,')INSERT INTO #tbl_ScriptVALUES (' en.MultiDesc = te.MultiDesc,')INSERT INTO #tbl_ScriptVALUES (' en.InhSw = te.InhSw,')INSERT INTO #tbl_ScriptVALUES (' en.InhFrom = te.InhFrom')INSERT INTO #tbl_ScriptVALUES ('FROM AttrName en, #tbl_AttrName te')INSERT INTO #tbl_ScriptVALUES ('WHERE en.AttrRef = te.AttrRef')INSERT INTO #tbl_ScriptVALUES (' AND en.LanRef = te.LanRef')INSERT INTO #tbl_ScriptVALUES (' AND te.LanRef = 0')-- Do update Test the dataINSERT INTO #tbl_ScriptVALUES ('UPDATE l')INSERT INTO #tbl_ScriptVALUES ('SET')INSERT INTO #tbl_ScriptVALUES (' l.TestID = t.TestID,')INSERT INTO #tbl_ScriptVALUES (' l.PrtTestRef = t.PrtTestRef,')INSERT INTO #tbl_ScriptVALUES (' l.AttrType = t.AttrType,')INSERT INTO #tbl_ScriptVALUES (' l.EdtblSw = t.EdtblSw,')INSERT INTO #tbl_ScriptVALUES (' l.NmValRef = t.NmValRef')INSERT INTO #tbl_ScriptVALUES ('FROM Test l, #tbl_Test t')INSERT INTO #tbl_ScriptVALUES ('WHERE l.AttrRef = t.AttrRef')INSERT INTO #tbl_ScriptVALUES ('')--DELETE where just updatedINSERT INTO #tbl_ScriptVALUES ('DELETE FROM t')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_Test t, Test l')INSERT INTO #tbl_ScriptVALUES ('WHERE t.AttrRef = l.AttrRef')INSERT INTO #tbl_ScriptVALUES ('')INSERT INTO #tbl_ScriptVALUES ('DELETE FROM t')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_TestAttr t, TestAttr le')INSERT INTO #tbl_ScriptVALUES ('WHERE t.AttrRef = le.AttrRef')INSERT INTO #tbl_ScriptVALUES ('')INSERT INTO #tbl_ScriptVALUES ('DELETE FROM te')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_AttrName te, TestAttr le')INSERT INTO #tbl_ScriptVALUES ('WHERE te.AttrRef = le.AttrRef')INSERT INTO #tbl_ScriptVALUES ('')-- Insert TestAttrINSERT INTO #tbl_ScriptVALUES ('INSERT INTO TestAttr (AttrRef, TestRef, Seq, PrtRef,AttrType,Value, TermDate, AttrID, DefSw, WantSw, ActSw)')INSERT INTO #tbl_ScriptVALUES ('SELECT t.AttrRef, t.TestRef, t.Seq, t.PrtRef, t.AttrType,t.Value, t.TermDate, t.AttrID, t.DefSw, t.WantSw, t.ActSw')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_TestAttr t')INSERT INTO #tbl_ScriptVALUES ('')-- AttrNameINSERT INTO #tbl_ScriptVALUES ('INSERT INTO AttrName(AttrRef, LanRef, Code, [Desc],MultiCode,MultiDesc, InhSw, InhFrom)')INSERT INTO #tbl_ScriptVALUES ('SELECT te.AttrRef, le.AttrRef, te.Code, te.[Desc],te.MultiCode, te.MultiDesc, ')INSERT INTO #tbl_ScriptVALUES (' CASE le.AttrRef ')INSERT INTO #tbl_ScriptVALUES (' WHEN 0 THEN 0')INSERT INTO #tbl_ScriptVALUES (' ELSE 1 END,')INSERT INTO #tbl_ScriptVALUES (' CASE le.AttrRef ')INSERT INTO #tbl_ScriptVALUES (' WHEN 0 THEN NULL')INSERT INTO #tbl_ScriptVALUES (' ELSE 0 END')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_AttrName te, TestAttr le')INSERT INTO #tbl_ScriptVALUES ('WHERE le.TestRef = ' + CAST(@Lan_TestRef as varchar))INSERT INTO #tbl_ScriptVALUES ('')-- Insert new rowsINSERT INTO #tbl_ScriptVALUES ('INSERT INTO Test(AttrRef, TestID, PrtTestRef, AttrType,EdtblSw, NmValRef, SrtTypeRef)')INSERT INTO #tbl_ScriptVALUES ('SELECT t.AttrRef, t.TestID, t.PrtTestRef, t.AttrType,t.EdtblSw, t.NmValRef, t.SrtTypeRef')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_Test t')INSERT INTO #tbl_ScriptVALUES ('')INSERT INTO #tbl_ScriptVALUES ('DROP TABLE #tbl_Test')INSERT INTO #tbl_ScriptVALUES ('DROP TABLE #tbl_TestAttr')INSERT INTO #tbl_ScriptVALUES ('DROP TABLE #tbl_AttrName')-- Update RefGenDECLARE @RefGenReflast int,@RefGenRefStr varchar(10)SELECT @RefGenReflast = lastFROM RefGenWHERE RefGenRef = 1SELECT @RefGenRefStr = ISNULL(CAST(@RefGenReflast as varchar), 'NULL')INSERT INTO #tbl_ScriptVALUES('')INSERT INTO #tbl_ScriptVALUES('UPDATE RefGen')INSERT INTO #tbl_ScriptVALUES ('SET Last = ' + @RefGenRefStr)INSERT INTO #tbl_ScriptVALUES ('WHERE RefGenRef = 1')INSERT INTO #tbl_ScriptVALUES ('')GOSET QUOTED_IDENTIFIER OFFGOSET ANSI_NULLS ONGO*******************************RegardsGlenn
View 5 Replies View RelatedWhen overriding the PrimeOutput method in a custom component, you get as parameters the outputIDs and the output buffers (of type PipelineBuffer). using the outputIDs you can get IDTSOutput90 outputs.
View 5 Replies View RelatedHi,
I am having problem in bulk update of a sql server table haning identity column from a datatable( has no identity column) using sqlbulkcopy. I tried several approaches, but it does not show any error nor is the table getting updated. But the identity value seems to getting increased every time.
thanks.
varun
I'm working with a third-party database (SQL Server 2005) and the problem here is the following:
- There are a bunch of ETL processes that needs to insert rows on a table (let's call this table T) and at the same time, an ERP (owner of T) is up and running (reading, updating and inserting on T).
- The PK of T is an Integer.
Today all ETL processes uses (select max(ID) + 1 from T) to insert new rows, so just picture the scenario. It is a mess! Everyday they get duplicate key error when 2 or more concurrent processes are trying to insert a row (with the max) at the same time.
Considering that I can't change the PK, what is the best approach to solve this problem?
To sum up:
* I need to have processes in parallel inserting on T
* I can't change anything on T
* The PK is NOT an Identity
when i alter non identity column to identity column using this Query alter table testid alter column test int identity(1,1) then i got this error message Msg 156, Level 15, State 1, Line 3 Incorrect syntax near the keyword 'identity'.
View 2 Replies View Relatedi have found loads of topics on this but have yet to find one that gives the answer i need.I want to display the last insert id into a label/textbox after the INSERT functionhow do i do this?
View 18 Replies View RelatedI got two tables
one table has the fields ie table1
orderid ofd orderdate customername
where order id is autonumber
the other table2
orderid ofd product id productname
the problem here is thatif customer purchases 3 product at a time all the 3 products get the same ofd number ........and any 2 customers can have the same ofd number................ now i have to pull the order ID value from table 1 to table 2............ can somebody help with this i am the front end is asp.net amd the database is done on SQL server management studio
Hi, I was looking through this thread about @@Identity: http://forums.asp.net/p/1039145/1443971.aspx#1443971 I'm still unsure how to ue it. I have an Orders table, a Products table and a Products_Orders table. When I add an order to the Orders table I want the PK OrderID in this table to also update the FK OrderID in my Products_Orders table. I'm using SQL EXP05 and I'm in C#.
View 1 Replies View RelatedHi i want to get the naxt identity number how can i get it pls help me very urgent
View 3 Replies View RelatedI know identity key in a table can cause problems when the table is replicated. Should we avoid using identity key altogether, if we don't know in advance whether replication will come into the picture?
Thanks for any advice.
hello,
I've got a problem reading the @@identity in vb.net
I tried it the way below and get the error: Public member 'EOF' on type 'Integer' not found.
(--> means with rsLastIdent)
comm_user = "SET NOCOUNT ON; INSERT INTO user (firstname, lastname, company, emailAddress) VALUES ...); SELECT @@IDENTITY AS Ident;"
comm = new SqlCommand(comm_user, dbConnection)
dbConnection.Open()
Try
rsLastIdent = comm.ExecuteNonQuery()
Catch ex As Exception
Response.Write("Exception:")
Response.Write(ex.ToString)
End Try
if NOT rsLastIdent.EOF then
feed_userID = rsLastIdent.Fields.Item("Ident").Value
end if
The sql-statement is correct - I tried it on SQL Server and got the correct result, so something is wrong with my vb.net code...
Please can anybody help me and tell me how to declare my rsLastIdent or another way to code it in vb.net to get the @@identity?
Thanks a lot!
tim
hi,
I was wondering if someone could help me out with this stored procedure I have. I am trying to execute a transaction in one of my sps and am getting pk violations on 'OrderID'.
This where i encounter this error:
SELECT
@OrderID = @@Identity
/* Copy items from given shopping cart to OrdersDetail table for given OrderID*/
INSERT INTO OrderDetails
(
OrderID,
ProductID,
Quantity,
UnitCost
)
SELECT
@OrderID,
ShoppingCart.ProductID,
ShoppingCart.Quantity,
Prices.UnitCost
FROM
ShoppingCart INNER JOIN
Prices ON ShoppingCart.ProductID = Prices.ProductID
WHERE
CartID = @CartID
is there any way to rewrite this statement so that I can put it in the form insert()values(). ?
HiTrying to get a return value from this code, but only gets a 0. Am using SQLExpress.SqlParameter[] p = new SqlParameter[4];p[0] = new SqlParameter("@a", "aaa");p[1] = new SqlParameter("@b", "bbb");p[2] = new SqlParameter("@c", "ccc");p[3] = new SqlParameter("@d", SqlDbType.Int, 40);p[3].Direction = ParameterDirection.ReturnValue;
string s = @"set nocount on INSERT INTO ABC(A, B, C) VALUES(@a,@b,@c) SELECT scope_identity()";
using(SqlConnection conn = new SqlConnection(this._connection)){ conn.Open(); SqlHelper.ExecuteNonQuery(conn, CommandType.Text, s, p); int foo = p[3].Value;}
Hi all,
is there a way in SQL Server for me to get the next available Identity value from an Identity column?
(I don't want to perform an insert, and then get the identity through @@IDENTITY!)
Thanks
Tryst
I am trying to follow other examples I have seen on the site, and am still getting the
Must declare the scalar variable "@@INDENTITY".
string sqlAdd = string.Format("INSERT INTO " + siteCode + "_campaign_table (campaign_name, prod_id, type) "
+ "VALUES('{0}', '{1}', '{2}'); SELECT @@INDENTITY", campaignName, prodID, type);
SqlCommand comAdd = new SqlCommand(sqlAdd, con);
comAdd.CommandType = CommandType.Text;
con.Open();
//comAdd.ExecuteNonQuery();
int identity;
identity = Decimal.ToInt32((decimal)comAdd.ExecuteScalar());
lblErrorMessageAdd.Text = identity.ToString();
con.Close();
Is it possible to use the ALTER TABLE statment when modifying an INT field to be an IDENTITY.
thanks in advance.
I would like to know the best way to select/maintain a sequence number in SQL Server. I've seen locking problems with using the @@identity and was wondering if there is a better way.
Several of our applications have the need to generate a sequence number that is inserted into one or several tables. In one application they have done the following ...
- Created a table with a column defined with identity attribute, for example
TableA
ColA defined as Int with Identity checked
ColB define as char(20)
- In the application, code looks like to get the sequence number:
insert into tableA (ColB, 'anything');
select (@@identity) as sequence from TableA
Then the last 5 positions of sequence are used to insert into another table. Problem with this is that several rows are being created in tableA when only a sequence number is needed. Also, we need to make sure no one else does an insert before the select @@identity.
Another approach I'm thinking about would be to create a one row table that contains an integer field initialized with a value of 1. To select/update the sequence number the code would need to:
set transaction serializable
select number
from tableA UPDLOCK
update tableA
set number = number + 1
How are most people generating a sequence number in SQL Server? In Oracle this would be done by selecting sequence.nextval. For example:
Select sequenceA.nextval from dual;
Is there an equivalent way in SQL Server 7.0? Thanks.
Hi,
Is there a way, I can give access(not dbo or sa) to a person so they can bcp into tables that have identity columns? I want to be able to give permissions ahead so I do not have to bother setting the identity insert on every time he wants to bcp.
Thanks a lot for your help
Sasha
I'm successfully inserting into a db using a stored proc, but I need to replicate the ClientID to 10 other tables. For some reason, this one is escaping me.
After a successful insert, I then use:
SELECT @@IDENTITY ClientID
SELECT @ClientID = @@IDENTITY
INSERT INTO table2
(ClientID)
VALUES(@ClientID)
INSERT INTO table3
(ClientID)
VALUES(@ClientID)
INSERT INTO table4
(ClientID)
VALUES(@ClientID)
The insert ClientID into the other tables is being inserted. I added SET @ClientID = @@IDENTITY and it made no difference.
Thanks for the help.
Alan
Does anyone know if there is bug/problem with the @@identity global variable in SQL Server 7.0?
I have a stored procedure that inserts a row into a table with an identity column and returns (outputs) the value
of the identity column just generated. The SP is called by a Java program. The SP works fine most of the time,
however from time to time it retuns a NULL value! Your comments/suggestions are much appreciated.
Hi everyone,
Can someone explain how I can use another table to hold my @@identity value so I can have the correct value to update other tables?
Thank you very much,
Nathan