Identity Set , How To Reset Record No
Mar 28, 2006
i have a table with the following fiels ,
Column NameDataType
Sno intIdentity = Yes , Identity Speed =1 , Identity Increament =1
namechar
Now i entered data and coneected to database, worked.Now after cheking all the data entered with the form , now i have to send the table to client place.
The problem is , the sno column has the value which i entered last. now if i delete all records , then also the record no doesnot become 0.
what i have to do, to set the sno column to 1 again.
View 3 Replies
ADVERTISEMENT
Jun 16, 2008
I have a table where I delete all the records, then reload. can I reset the identity to (1,1) Is there a SQL command for that?
-smcirish
View 3 Replies
View Related
Mar 11, 2004
In my application , DB has a large table. I write a small program to clear the table whenever the size of table is over 50 MB. At that time , I want to reset identity as 1. How can I do that?
Currently , my program delete old table and generate a new one with the same schema when the table is too large.But this is kind of ugly.
View 1 Replies
View Related
Jun 27, 2001
Can a column of Identity type reset after it reaches its maximum value?
Thanks,
Ben
View 4 Replies
View Related
Mar 15, 2004
How can I reset an identity Int column back to start with 1 if I remove all rows from the table?
Thanks,
View 1 Replies
View Related
Aug 26, 2005
Hello,
Can I reset the IDENTITY seed of a Table column without delete/drop the table?
I want to delete all the table rows, restore de seed, and restore a
backup made on a XML (using SET IDENTITY_INSERT Table ON)
I cant drop the table due to acount restricctions.
regards,
Edu
View 3 Replies
View Related
Oct 13, 2005
Obviously to delete all records from DB table is simple, however, I would like to make my whole Live DB pretty much empty. I've copied all my data from my test DB over to my live DB (didn't mean to but I did). I would like to remove all the data and the identity values, resetting them back at their original values. Is there a simple way or do I have to do it the hard way. That being going in and removing Identity, saving and then placing identity back on the DB Table.
View 3 Replies
View Related
Jun 1, 1999
I would like to set the identity seed to a different value. How do I do that? Please help!
Sam
View 3 Replies
View Related
Jul 20, 2005
Reset the Identity IncrementHello:I have a table with a bigint type column (field) that has an identity seedof 1 and an identity increment of 1. The column is the primary key for thetable.After I backup and clean out the database (delete all of the data in the DB)I need to have the column with the identiy seed/increment value reset to 1automatically. (start counting at 1 again). How does one do that, becauseas it is now, the DB keeps increasing the value of the column from where itleft off, regardless of the fact that I deleted all of the data in thetable.The DB is MS SQL Server 2000.Thanks and appreciate any help.Ryan Kennedy
View 2 Replies
View Related
Nov 27, 2007
Hi
I have a table with Identity column starting from value 1 and autoincrementing 1 for every new value. I inserted (5) rows and then deleted these rows. But, when i insert a new row, it was taking the last identity value(5)and inserting the rows with next identity value i.e., 6 for this column. I dont want that. Everytime, I delete and insert rows in to this table.I wanted the rows to start with 1 for this column.
Any help on this is highly appreciated.
Thanks!
View 4 Replies
View Related
Jul 15, 2006
Hello friends,
I have a table in SQL server 2005. it contains one identity column named EmpID
it's datatype is int isidentity and auto increment by 1.
I deleted all the records from this table.
Now I want that EmpID should start again from 1 how can I do it ?
Thanks & Rgds,
Kiran Suthar.
View 9 Replies
View Related
Sep 25, 2007
Changing the seed and increment values on the identity column
- CREATE TABLE MyCustomers (CustID INTEGER IDENTITY (100,1) PRIMARY KEY, CompanyName NvarChar (50))
- INSERT INTO MyCustomers (CompanyName) VALUES ('A. Datum Corporation')
- ALTER TABLE MyCustomers ALTER COLUMN CustId IDENTITY (200, 2)
When i excute the Alter command, following error comes:"Incorrect syntax near the keyword 'IDENTITY'."I've picked the example from SQL SERVER 2005 books online.Please let me know if we can change the seed value on the identity column from a sql command.
View 1 Replies
View Related
Feb 16, 2004
I have a test database that is being moved to the production server. Currently in one of the tables I have an identity seed for each record. Is there a way to reset it back to zero. I have deleted all my records but it still doesnt work, and I dont want to create a new table.
Thanks
View 5 Replies
View Related
Aug 6, 2007
Is there a way to delete all items from a table that has an identity column and to reset the counter for all new insertions so that they begin at '1' again?
View 5 Replies
View Related
Jul 9, 2004
I have a remote DB I am wokring with at present. The DBA has provided me with a non owner LOGIN so I can't copy tables from the live to the staged DB as objects I can only copy tables and data.
The PKEY and IDENTITY COLUMNS get reset to just regular columns on each table. I can restore the PKEY constraint and have come across the DBCC CHECKIDENT to get the new ident value. I just can't figure out how to set a column to be an identity. The ALTER TABLE command isn't having any of it.
I am obviously missing the right bit on Books online
any suggestions?
many thanks
Steve
View 1 Replies
View Related
Jul 20, 2007
I have a demo database in SqlCE that I am getting ready to deploy. I deleted a bunch of test records and now want to reset the identity columns. The compact method runs fine, but the identity columns are not being reset? So when I add a new record, the returned identity value is over 1,000 even though the highest value is only 50.
Any help is greatly appreciated!
Kind Regards,
Mat
View 7 Replies
View Related
Apr 4, 2006
I know that TRUNCATE TABLE can be used to reset the identity counter, but it can't be used on a table referenced by a foreign key. Anybody knows how to do that? Thanks.
View 4 Replies
View Related
Jan 18, 2005
I am using VS.net (2003) SQLcommand TEXT. with input params.
SQL server 2000
Can anyone tell me how to get the Identity value (field value, Idenity col) when you do an insert? I want to get the Identity value, then redirect the user to another page and use this identity value so they can update more (other) fields that are on that page.
My code so far that works... but Where do I put @@IDENTITY ?
How do I call or assign the @@IDENTITY value to a value in my aspx.vb code page?
Question: how do I get the Identity value from the ID column.
Question: How do I assign that value to some variable in code, say, assign it to (Session("App_ID")) = IdentityValueOrSomething?Help...
---------------------
INSERT INTO App
(AppName, Acronym, Description,bla bla bla bla........)
VALUES (@AppName, @Acronym, @Description, bla bla bla bla........)
-----------------------------
Private Sub btnAddApp_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnAddApp.Click
With cmdAddApp
'.Parameters("@app_id").Value = Session("App_ID")
.Parameters("@AppName").Value = txtAppName.Text
.Parameters( bla bla bla.............
.Parameters( bla bla bla.............
.Parameters( bla bla bla.............
End With
Try
cnAppKBdata.Open()
cmdAddApp.ExecuteNonQuery()
cnAppKBdata.Close()
''''''''''''''Session("App_ID") = whatever the @@IDENTITY is....'''''''''''''''''''''''''''??
Response.Redirect("AppUpdate.asp")
Catch ex As Exception
End Try
End Sub
Anyone have the lines of code that does this?
Any advise or examples :) thanks you.
View 1 Replies
View Related
Nov 15, 2001
Does anyone know how to get the indentity of the last updated record in a table. I need it for a cascading trigger.
Thank you,
Jody
View 3 Replies
View Related
Oct 29, 2006
Hi, I have 2 tables in my database PrescriptionHeader and PrescriptionDetails.My PrescriptionHeader table has the following fields:PrescriptionID -identity fieldPatientID PatientfNamePatientlname PrescriptionDetails table has the following fields:PrescriptionDetailID -identityPrescriptionID -from PrescriptionHeader table MedicineDosage The function InsertPrescription inserts values into the table PrescriptionHeader. I want the same function to then insert the value of MedicineDosage into PrescriptionDetails with the same PrescriptionID inserted into PrescriptionHeader. How do I tell the function to insert the PrescriptionID that was automatically inserted into PrescriptionHeader also into table PrescriptionDetails . How do I return the identity before proceeding to insert into PrescriptionDetails table?ThanksFunction InsertPrescription(ByVal PatientID As String, _ByVal PatientFname As String, _ByVal Patientlname As String, ByVal MedicineDosage as String)Dim DBAdapter As SqlDataAdapterDim DBDataSet As DataSetDim SQLString As StringDim DBCommandBuilder As SqlCommandBuilderSQLString = "SELECT * FROM PrescriptionHeader WHERE PrescriptionId = ''"DBAdapter = New SqlDataAdapter(SQLString, DBConnection)DBDataSet = New DataSetDBAdapter.Fill(DBDataSet)Dim AddedRow As DataRow = DBDataSet.Tables(0).NewRow()AddedRow("PatientID") = PatientIDAddedRow("PatientfName") = PatientFnameAddedRow("Patientlname") = PatientlnameDBDataSet.Tables(0).Rows.Add(AddedRow)DBCommandBuilder = New SqlCommandBuilder(DBAdapter)DBAdapter.Update(DBDataSet) End Function
View 1 Replies
View Related
Jan 30, 2008
Ok I've been researching this for a day now and I'm not coming up with much. I want to store the auto-incrementing ID of the last inserted record in a session variable, so that I may put it in a foreign key column in another table, if the user wishes to fill out a form on another page. I think my stored procedure is correct. But don't know what code to add to my aspx page. Any help will be greatly appreciated.
Here is my VB ScriptProtected Sub submitButton_Click(ByVal sender As Object, ByVal e As System.EventArgs)
Dim personalContactDataSource As New SqlDataSource()personalContactDataSource.ConnectionString = ConfigurationManager.ConnectionStrings("DataConnectionString1").ToString()
personalContactDataSource.InsertCommandType = SqlDataSourceCommandType.StoredProcedure
personalContactDataSource.InsertCommand = "PersonalContactInsert"
personalContactDataSource.InsertParameters.Add("FirstName", FirstName.Text)
personalContactDataSource.InsertParameters.Add("LastName", LastName.Text)personalContactDataSource.InsertParameters.Add("KeyPerson", KeyPerson.Checked)
personalContactDataSource.InsertParameters.Add("DayPhone", DayPhone.Text)personalContactDataSource.InsertParameters.Add("EveningPhone", EveningPhone.Text)
personalContactDataSource.InsertParameters.Add("Fax", Fax.Text)personalContactDataSource.InsertParameters.Add("Email", Email.Text)
personalContactDataSource.InsertParameters.Add("HomeAddress", HomeAddress.Text)personalContactDataSource.InsertParameters.Add("City", City.Text)
personalContactDataSource.InsertParameters.Add("State", State.Text)personalContactDataSource.InsertParameters.Add("Zip", Zip.Text)
personalContactDataSource.InsertParameters.Add("ReqEffectDate", ReqEffectDate.Text)personalContactDataSource.InsertParameters.Add("MRID", MRID.Text)
personalContactDataSource.InsertParameters.Add("CurrentPremium", CurrentPremium.Text)personalContactDataSource.InsertParameters.Add("CurrentCarrier", CurrentCarrier.Text)
personalContactDataSource.InsertParameters.Add("CurrentDeductible", CurrentDeductible.Text)personalContactDataSource.InsertParameters.Add("CurrentCoins", CurrentCoins.Text)personalContactDataSource.InsertParameters.Add("ReasonForQuote", ReasonForQuote.Text)
End Sub
And here is my Stored ProcALTER PROCEDURE dbo.PersonalContactInsert
@FirstName varchar(30),@LastName varchar(30),
@DayPhone varchar(14),@EveningPhone varchar(14),
@Fax varchar(14),@Email varchar(60),
@HomeAddress varchar(80),@City varchar(30),
@State char(2),@Zip char(5),
@KeyPerson bit,@ReqEffectDate smalldatetime,
@CurrentCarrier varchar(30),@CurrentPremium smallmoney,
@CurrentDeductible smallmoney,@CurrentCoins smallmoney,
@ReasonForQuote varchar(150),@MRID int,
@ClientNumber int OUT
AS
INSERT INTO PersonalContact(FirstName, LastName, DayPhone, EveningPhone, Fax, Email, HomeAddress, City, State, Zip, KeyPerson, ReqEffectDate, CurrentCarrier, CurrentPremium, CurrentDeductible, CurrentCoins, ReasonForQuote, MRID, DateTimeStamp)
VALUES(@FirstName,@LastName,@DayPhone,@EveningPhone,@Fax,@Email,@HomeAddress,@City,@State,@Zip,@KeyPerson,@ReqEffectDate,@CurrentCarrier,@CurrentPremium,@CurrentDeductible,@CurrentCoins,@ReasonForQuote,@MRID, GetDate())
SET @ClientNumber = SCOPE_IDENTITY()
RETURN
View 8 Replies
View Related
Oct 28, 2005
I am storing product information in a SQL Server database table; the product information has no unique fields so I have created an Identity field called ‘uid’. Is there a way of querying the table to find out what value will be given to the next ‘uid’ field before the next record is written to the table? I need to use this as a FK in other tables.
View 3 Replies
View Related
Mar 7, 2001
hello everyone
I have table that look like
CREATE TABLE GuestAccount
(
Id_Guest smallint,
SeqNo int IDENTITY(1,1),
account money Null
PRIMARY KEY(Id_Guest,SeqNo)
)
Q?
I want my SeqNo start from 1 for new Id_Guest
is it possible ?
tnanks
View 3 Replies
View Related
Aug 21, 2014
Best way to retrieve the identity key of the record just inserted?This question is for discussion purposes; the business process that spurred the question is currently working.Using SQL Server 2008 R2, a record is inserted from a stored procedure. Let's say the sp has something like this:
Code:
BEGIN
BEGIN TRANSACTION
INSERT INTO tblTools
([Desc],CreateDate,Model,CreatedBy,Notes)
[code]....
In Access, when you add a new record to the recordset, the identity field comes "pre-populated" making it east to get the actual, correct identity value assigned to the record you are inserting. In SQL Server, I know options include:
Code:
IDENT_CURRENT('tblX')
SCOPE_IDENTITY
@@IDENTITY
among other methods.
Each has pros and cons, such as user privileges (IDENT_CURRENT requires the user to have Select privileges on the table, and catches records created by other things, such as users and triggers), and the other two give you the last key inserted and don't allow specifying the object (which is a problem if the insert added records to multiple tables, or you have multiple inserts).
View 2 Replies
View Related
Oct 17, 2007
Hello,
I am using Access with tables linked to sql server 2005. I need the identity to be displayed directly when entering data so that i can enter enter data into other tables using this identity on the form without the need to go back and forward to other records to display the identity. Is there a feature in Sql server 2005 which permits this?
Thank you
View 2 Replies
View Related
Oct 5, 2006
i recently found a little error in a stored procedure that was included in a project handed over to me....
the sp was rather simple. it just inserted a record into a table and returned the identity and the timestamp as follows
IF @@ERROR>0
BEGIN
SELECT @int_InterventionID = 0
RETURN @@ERROR
END
ELSE
BEGIN
SELECT @int_InterventionIDReturned = MAX(InterventionID) FROM tblIntervention
SELECT @ts_TimestampReturned = [Timestamp] FROM tblIntervention WHERE InterventionID = @int_InterventionIDReturned
SELECT @int_InterventionID = @int_InterventionIDReturned, @ts_Timestamp = @ts_TimestampReturned
RETURN 0
END
i figured that it should be using @@Identity for the interventionIdentity rather than max(InterventionID)
so i changed to...
IF @@ERROR>0
BEGIN
SELECT @int_InterventionID = 0
RETURN @@ERROR
END
ELSE
BEGIN
SELECT @int_InterventionIDReturned = @@IDENTITY
SELECT @ts_TimestampReturned = [Timestamp] FROM tblIntervention WHERE InterventionID = @int_InterventionIDReturned
SELECT @int_InterventionID = @int_InterventionIDReturned, @ts_Timestamp = @ts_TimestampReturned
RETURN 0
END
it returns the @int_InterventionIDReturned but the timestamp now comes back as null??? why??
how can i ensure that i always get the timestamp of the record it has just inserted
any help greatly appreciated,
Cheers,
Craig
View 3 Replies
View Related
Nov 26, 2005
We're using ASPUpload as a tool to upload files to our server and savethe details to SQLServer. However, I have an application where I needto return the pkID of the just saved file. I'm assuming that I coulduse the @@Identity command but cannot get this to function.Has anyone used this command with ASPUpload with an success, or anyother methods that could be used?Thanks.
View 8 Replies
View Related
Jan 16, 2006
Hi, All:Please help. I use sql server as back end and Access 2003 as front end(everything is DAO).A table on SQL server has an identity column as the key.We have trouble on adding records to this table using the following SQL.strSQL = "INSERT INTO myTableOnSQLServer (A, B, C, D, E) SELECT A, B, C, D,E FROM myTableonAccessLocal"db.execute strSQLThe schema of the table "myTableOnSQLServer" and the schema of the table"myTableonAccessLocal" are all the same except that the "myTableOnSQLServer"has an identity column (ID). The key of the "myTableOnSQLServer" is "ID" andthe table "myTableonAccessLocal" does not have a key.When we try to run the query, it gives errors indicating the key is violatedor missing.Should I figure out the autonumber for it first and then add to the SQLserver table?Many thanks,HS
View 1 Replies
View Related
Oct 7, 2015
I have table contains more columns and first column have ID int not null primary key and auto increment by 1 seed by 1 the ID 165000 record and instant Jump to 166000 and increment by 1 ...
View 5 Replies
View Related
Jun 23, 2006
Hello
Using Visual Studio 2005 Prof and SQL Server everywhere.
How do get the identity column value after insert record.
With SQL Server 2005, its quite easy to get by creating and insert statement on the tabledapter ( Insert statement followed by a select statement where identitycolumn = scope_identity())
How do this is sql everywhere??
regards
View 1 Replies
View Related
Jun 18, 2007
Hi all,
(I am using SQL Server 2005)
I have created a new 'CUSTOMERS' table and created a colum 'CustomerID' as an Identity column.
Now, a problem I find is that when I delete a particular record, its Identity value is used automatically for the New record I insert later!
I do not want to re-use the already used Identity value.
I just want to have the last CustomerID to be higher that all the previous ones.
Is there any way to do this?
Thanking you in advance,
Tomy
View 2 Replies
View Related
Jun 5, 2006
is there any way of getting the identity without using the "@@idemtity" in sql??? I'm trying to use the inserted event of ObjectDataSource, with Outputparameters, can anybody help me???
View 1 Replies
View Related
Jul 9, 2006
While I have learned a lot from this thread I am still basically confused about the issues involved.
.I wanted to INSERT a record in a parent table, get the Identity back and use it in a child table. Seems simple.
To my knowledge, mine would be the only process running that would update these tables. I was told that there is no guarantee, because the OLEDB provider could write the second destination row before the first, that the proper parent-child relationship would be generated as expected. It was recommended that I create my own variable in memory to hold the Identity value and use that in my SSIS package.
1. A simple example SSIS .dts example illustrating the approach of using a variable for identity would be helpful.
2. Suppose I actually had two processes updating these tables, running at the same time. Then it seems the "variable" method will also have its problems. Is there a final solution other than locking the tables involved prior to updating them or doing something crazy like using a GUID for the primary key!
3. We have done the type of parent-child inserts I originally described from t-sql for years without any apparent problems. (Maybe we were just lucky.) Is the entire issue simply a t-sql one or does SSIS add a layer of complexity beyond t-sql that needs to be addressed?
TIA,
Barkingdog
View 10 Replies
View Related
