If / Else Stored Proc -- What Am I Doing Wrong?
Mar 29, 2005
Bellow is the stored procedure. I wanted to do an If / Else statement. I'm getting a syntax error that something is wrong around my Begin / Else statements. If anyone knows what is wrong I would greatly appriciate it.
Thanks in advance as always.
RB
<code>
Create Proc UpdateFundsAndTotals ASIF (Select FundsAndTotals.fundID, FundsAndTotals.TotalPledges, TotalPledges.fundID, TotalPledges.TotalPledges From FundsAndTotals, TotalPledges Where FundsAndTotals.fundID = TotalPledges.fundID AND FundsAndTotals.TotalPledges != TotalPledges.TotalPledges)Begin Update FundsAndTotals Set FundsAndTotals.TotalPledges = TotalPledges.TotalPledgesENDELSE (Select FundsAndTotals.fundID, FundsAndTotals.TotalPledges, TotalPledges.fundID, TotalPledges.TotalPledges From FundsAndTotals, TotalPledges Where FundsAndTotals.fundID = TotalPayments.fundID AND FundsAndTotals.TotalPayments != TotalPayments.TotalPayments)Begin Update FundsAndTotals Set FundsAndTotals.TotalPayments = TotalPayments.TotalPaymentsENDElseEND
</code>
View 7 Replies
ADVERTISEMENT
Mar 8, 2005
Can somebody please debug what is wrong with this stored proc.
When I execute this procedure I get an error
Invalid column name 'abcd'.
CREATE PROCEDURE SearchTest
@LName varchar (25) = 'abcd',
@ID varchar(9) = null
AS
Declare @query varchar(100)
Set @query = 'Select * From Document '
IF ( @LName IS NOT NULL)
set @query = @query + ' Where LName = ' + @LName
exec (@query)
GO
Thanks :)
View 4 Replies
View Related
Aug 16, 2004
Hi,
I'm getting an error ERROR 137: Must declare the variable '@' when I click the check sysntax button on my store proc window. Any ideas on how to resolve this??
CREATE PROCEDURE CabsSchedule_GetPrevYearMonth
AS
DECLARE @prvYearMonth int
DECLARE @prvYear int
DECLARE @prvMonth int
BEGIN
SET @prvYearMonth = (SELECT MAX(YearMonth) FROM CabsSchedule)
IF ((SELECT COUNT(*) FROM CabsSchedule WHERE YearMonth = @ prvYearMonth) > 15)
ELSE
BEGIN
IF (SUBSTRING(CAST(@prvYearMonth AS VarChar(6)), 5, 2) = '01')
BEGIN
SET @prvMonth = 12
SET @prvYear = CAST(SUBSTRING(CAST(@prvYearMonth AS VARCHAR(6)),1,4) AS INT) - 1
SET @prvYearMonth = CAST(CAST(@prvYear AS VARCHAR(4)) + CAST(@prvMonth AS VARCHAR(2)) AS INT)
END
END
END
GO
Thanks,
View 1 Replies
View Related
Feb 13, 2008
I am working with a large application and am trying to track down a bug. I believe an error that occurs in the stored procedure isbubbling back up to the application and is causing the application not to run. Don't ask why, but we do not have some of the sourcecode that was used to build the application, so I am not able to trace into the code.
So basically I want to examine the stored procedure. If I run the stored procedure through Query Analyzer, I get the following error message:
Msg 2758, Level 16, State 1, Procedure GetPortalSettings, Line 74RAISERROR could not locate entry for error 60002 in sysmessages.
(1 row(s) affected)
(1 row(s) affected)
I don't know if the error message is sufficient enough to cause the application from not running? Does anyone know? If the RAISERROR occursmdiway through the stored procedure, does the stored procedure terminate execution?
Also, Is there a way to trace into a stored procedure through Query Analyzer?
-------------------------------------------As a side note, below is a small portion of my stored proc where the error is being raised:
SELECT @PortalPermissionValue = isnull(max(PermissionValue),0)FROM Permission, PermissionType, #GroupsWHERE Permission.ResourceId = @PortalIdAND Permission.PartyId = #Groups.PartyIdAND Permission.PermissionTypeId = PermissionType.PermissionTypeId
IF @PortalPermissionValue = 0BEGIN RAISERROR (60002, 16, 1) return -3END
View 3 Replies
View Related
Aug 24, 2006
I am having trouble executing a stored procedure on a remote server. On my
local server, I have a linked server setup as follows:
Server1.abcd.myserver.comSQLServer2005,1563
This works fine on my local server:
Select * From [Server1.abcd.myserver.comSQLServer2005,1563].DatabaseName.dbo.TableName
This does not work (Attempting to execute a remote stored proc named 'Data_Add':
Exec [Server1.abcd.myserver.comSQLServer2005,1563].DatabaseName.Data_Add 1,'Hello Moto'
When I attempt to run the above, I get the following error:
Could not locate entry in sysdatabases for database 'Server1.abcd.myserver.comSQLServer2005,1563'.
No entry found with that name. Make sure that the name is entered correctly.
Could anyone shed some light on what I need to do to get this to work?
Thanks - Amos.
View 3 Replies
View Related
Jun 15, 2006
Hi All,Quick question, I have always heard it best practice to check for exist, ifso, drop, then create the proc. I just wanted to know why that's a bestpractice. I am trying to put that theory in place at my work, but they areasking for a good reason to do this before actually implementing. All Icould think of was that so when you're creating a proc you won't get anerror if the procedure already exists, but doesn't it also have to do withCompilation and perhaps Execution. Does anyone have a good argument fordoing stored procs this way? All feedback is appreciated.TIA,~CK
View 3 Replies
View Related
Feb 23, 2007
I have an ASP that has been working fine for several months, but itsuddenly broke. I wonder if windows update has installed some securitypatch that is causing it.The problem is that I am calling a stored procedure via an ASP(classic, not .NET) , but nothing happens. The procedure doesn't work,and I don't get any error messages.I've tried dropping and re-creating the user and permissions, to noavail. If it was a permissions problem, there would be an errormessage. I trace the calls in Profiler, and it has no complaints. Thedatabase is getting the stored proc call.I finally got it to work again, but this is not a viable solution forour production environment:1. response.write the SQL call to the stored procedure from the ASPand copy the text to the clipboard.2. log in to QueryAnalyzer using the same user as used by the ASP.3. paste and run the SQL call to the stored proc in query analyzer.After I have done this, it not only works in Query Analyzer, but thenthe ASP works too. It continues to work, even after I reboot themachine. This is truly bizzare and has us stumped. My hunch is thatwindows update installed something that has created this issue, but Ihave not been able to track it down.
View 1 Replies
View Related
Feb 20, 2003
I have seen this done by viewing code done by a SQL expert and would like to learn this myself. Does anyone have any examples that might help.
I guess I should state my question to the forum !
Is there a way to call a stored proc from within another stored proc?
Thanks In Advance.
Tony
View 1 Replies
View Related
Jan 13, 2006
Hi all,
I have a stored procedure "uspX" that calls another stored procedure "uspY" and I need to retrieve the return value from uspY and use it within uspX. Does anyone know the syntax for this?
Thanks for your help!
Cat
View 5 Replies
View Related
Jan 20, 2004
Hi all
I have about 5 stored procedures that, among other things, execute exactly the same SELECT statement
Instead of copying the SELECT statement 5 times, I'd like each stored proc to call a single stored proc that executes the SELECT statement and returns the resultset to the calling stored proc
The SELECT statement in question retrieves a single row from a table containing 10 columns.
Is there a way for a stored proc to call another stored proc and gain access to the resultset of the called stored proc?
I know about stored proc return values and about output parameters, but I think I am looking for something different.
Thanks
View 14 Replies
View Related
Aug 30, 2007
I would like to know if the following is possible/permissible:
myCLRstoredproc (or some C# stored proc)
{
//call some T SQL stored procedure spSQL and get the result set here to work with
INSERT INTO #tmpCLR EXECUTE spSQL
}
spSQL
(
INSERT INTO #tmpABC EXECUTE spSQL2
)
spSQL2
(
// some other t-sql stored proc
)
Can we do that? I know that doing this in SQL server would throw (nested EXECUTE not allowed). I dont want to go re-writing the spSQL in C# again, I just want to get whatever spSQL returns and then work with the result set to do row-level computations, thereby avoiding to use cursors in spSQL.
View 2 Replies
View Related
Oct 14, 2007
I am calling a stored procedure (say X) and from that stored procedure (i mean X) i want to call another stored procedure (say Y)asynchoronoulsy. Once stored procedure X is completed then i want to return execution to main program. In background, Stored procedure Y will contiue his work. Please let me know how to do that using SQL Server 2000 and ASP.NET 2.
View 3 Replies
View Related
Apr 23, 2008
Hello friends......How are you ? I want to ask you all that how can I do the following ?
I want to now that how many ways are there to do this ?
How can I call one or more stored procedures into perticular one Stored Proc ? in MS SQL Server 2000/05.
View 1 Replies
View Related
Apr 6, 2004
please take a look at this strored proxedure and tell what is wrong with it?
CREATE PROCEDURE sp_Pictures_CreateTextPost
@UserID Int,
@Country varchar (2),
@Description varchar (1000),
@PostID int output
AS
BEGIN TRANSACTION
INSERT INTO Pictures_TextPosts
(UserID, Country, Description)
VALUES
(@UserID, @Country, @Description)
IF @@ERROR <> 0
ROLLBACK TRANSACTION
ELSE
BEGIN
COMMIT TRANSACTION
UPDATE Accounts_Users SET Count_InsertText = Count_InsertText + 1 Where UserID = @UserID
SET @PostID = @@IDENTITY
RETURN 1
END
i run this sp on MS SQL server on my local machine and it works fine. now i move the same sp to the host server and it no longer works. it is the problem with this sp as i run sql query to test it. i use the ASP.NET Enterprise Manager to insert this sp. can someone please help?
one hint: on the host server, if i add 'GO' to the end of the sp, error occured.
View 6 Replies
View Related
Apr 8, 2004
I have written an ASP.net app that iterates through the controls on my page if the are checkboxlist or radiobuttonlist controls, the id and value are serialized into an xml file which is sent to a SQL 2000 stored procedure where the xml data is inserted into a couple of tables.
I captured the xml that is being sent:
<?xml version="1.0"?>
<Schema7Ihsurveyresponse xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" surveyid="1" Userid="14">
<ihsresponsedetail question="Q1" response="0" result="1" />
<ihsresponsedetail question="Q2" response="0" result="1" />
<ihsresponsedetail question="Q3" response="0" result="1" />
<ihsresponsedetail question="Q5" response="0" result="1" />
<ihsresponsedetail question="Q6" response="0" result="1" />
<ihsresponsedetail question="Q7" response="0" result="1" />
<ihsresponsedetail question="Q8" response="0" result="1" />
<ihsresponsedetail question="Q9" response="0" result="1" />
<ihsresponsedetail question="Q10" response="0" result="1" />
<ihsresponsedetail question="Q11" response="0" result="1" />
<ihsresponsedetail question="Q12" response="0" result="1" />
<ihsresponsedetail question="Q13" response="0" result="1" />
<ihsresponsedetail question="Q14" response="0" result="1" />
<ihsresponsedetail question="Q15" response="0" result="1" />
<ihsresponsedetail question="Q17" response="0" result="1" />
<ihsresponsedetail question="Q18" response="0" result="1" />
<ihsresponsedetail question="Q19" response="0" result="1" />
<ihsresponsedetail question="Q20" response="0" result="1" />
<ihsresponsedetail question="Q21" response="0" result="1" />
<ihsresponsedetail question="Q23" response="0" result="1" />
<ihsresponsedetail question="Q24" response="0" result="1" />
<ihsresponsedetail question="Q25" response="0" result="1" />
<ihsresponsedetail question="Q26" response="0" result="1" />
<ihsresponsedetail question="Q27" response="0" result="1" />
<ihsresponsedetail question="Q28" response="0" result="1" />
<ihsresponsedetail question="Q29" response="0" result="1" />
<ihsresponsedetail question="Q30" response="0" result="1" />
<ihsresponsedetail question="Q31" response="0" result="1" />
<ihsresponsedetail question="Q32" response="0" result="1" />
<ihsresponsedetail question="Q33" response="0" result="1" />
<ihsresponsedetail question="Q34" response="0" result="1" />
<ihsresponsedetail question="Q35" response="0" result="1" />
<ihsresponsedetail question="Q36" response="0" result="1" />
<ihsresponsedetail question="Q37" response="0" result="1" />
<ihsresponsedetail question="Q38" response="0" result="1" />
<ihsresponsedetail question="Q39" response="0" result="1" />
<ihsresponsedetail question="Q40" response="0" result="1" />
</Schema7Ihsurveyresponse>
and here is my stored procedure:
CREATE PROCEDURE Insertresponsedetails
@XML TEXT
AS
SET NOCOUNT ON
SET XACT_ABORT ON
-- Access is not restricted.
insert into tempxml ([xml]) values (@xml)
DECLARE @idoc INT, @responseid int
EXECUTE sp_xml_preparedocument @idoc OUTPUT, @XML, '<ns xmlns:a="http://interhealthusa.com/surveyresponse.xsd"/>'
if @@error<>0
begin
select(-1)
return
end
BEGIN TRANSACTION
insert into ihsurveyresponse (userid, Surveyid, Responsedate)
select userid, surveyid, getdate()
from openxml(@idoc, '/schema7ihsurveyresponse', 1)
with (userid int, surveyid int)
if @@error<>0
begin
rollback transaction
select 2
return
end
set @responseid = scope_identity()
INSERT INTO IHSResponsedetail (Question,Result, Response)
SELECT Question, Result, @responseid
FROM OPENXML (@idoc, '/schema7ihSurveyResponse/ihsresponsedetail')
WITH ( [Question] char(10) '@Question', Result int '@Result')
EXECUTE sp_xml_removedocument @idoc
if @@error<>0
begin
rollback transaction
select 3
return
end
COMMIT TRANSACTION
select @responseid
GO
If anyone has any insight I would really appreciate the assistance.
View 1 Replies
View Related
Sep 20, 2001
Hiya, all!
I've got this stored procedure:
CREATE Procedure CheckReOccurences
@PatID INT, @CPT CHAR(7),@DOS DATETIME,@DRecur SMALLINT
AS
DECLARE @DaysElapsed INT
SET @DaysElapsed = (SELECT DATEDIFF(day,ISNULL((SELECT MAX(ServiceDate) FROM VouchersDetail WHERE PatID = @PatID AND ProcCode = @CPT),01/01/1900),@DOS))
IF @DaysElapsed < @DRecur --Patient has had procedure done too recently
BEGIN
PRINT 'Too Recent-Only ' + str(@dayselapsed) + ' days elapsed'
RETURN 0
END
ELSE --More time has elapsed since procedure last performed than is necessary
BEGIN
PRINT 'Not Too Recent- ' + str(@dayselapsed) + ' days elapsed'
RETURN 1
END
And when I run it with the exec command in Query Analyzer, filling in all parameters with proper values, I get this error message:
Server: Msg 8114, Level 16, State 4, Procedure CheckReOccurences, Line 0
Error converting data type nvarchar to datetime.
Please note Line says 0, when no such line exists. I've tried running every single part separately in QA, and all runs well (the functions work, returns expected code, etc.). What's the problem?
Thanks,
Sarah
View 4 Replies
View Related
Jun 11, 2004
I am having trouble getting this procedure to properly enter the data into a table. It works when I do not add the @ToName info and only ask to insert the AccountID and FromName data. When i add the @ToNamevariable, no data is inserted. I think it might have to do with the select statement. I have two TerritoryID, RegionID, DivisionID, and EmpID because I want this information to be entered for both the FromName and the ToName selected. Does anyone know what my problem is? Id appreciate any help.
CREATE PROCEDURE InsertAllThree
@AccountID char(10),
@FromName nvarchar(50),
@ToName nvarchar(50)
AS
insert into accounttransferstestmike
(AccountID, FromTerritoryID, FromRegionID, FromDivisionID, FromEmpID, ToTerritoryID, ToRegionID, ToDivisionID, ToEmpID)
select Accounts.AccountID, Territories.TerritoryID, Regions.RegionID, Divisions.DivisionID, Employees.EmployeeID, Territories.TerritoryID, Regions.RegionID, Divisions.DivisionID, Employees.EmployeeID
From Accounts, EndoscopySqlUser.Territories INNER JOIN
EndoscopySqlUser.Regions ON EndoscopySqlUser.Territories.RegionName = EndoscopySqlUser.Regions.Region INNER JOIN
EndoscopySqlUser.Employees ON EndoscopySqlUser.Territories.TerritoryID = EndoscopySqlUser.Employees.TerritoryID INNER JOIN
EndoscopySqlUser.Divisions ON EndoscopySqlUser.Regions.Division = EndoscopySqlUser.Divisions.DivisionID
Where (Accounts.AccountID = @AccountID) and (EndoscopySqlUser.Employees.DateLeft IS NULL) AND (EndoscopySqlUser.Territories.TerritoryName=@FromN ame) AND (EndoscopySqlUser.Territories.TerritoryName=@ToNam e)
GO
View 4 Replies
View Related
Oct 31, 2006
When I try to create the stored procedure below, I receive the following error. Can someone please let me know what is wrong with the code? The problem seems to be with the default parameter of getdate(). This is because when I comment the default parameter, it works fine. Please note that I need the @BeginDate parameter to be varchar(10). I cannot have it as datetime.
Msg 156, Level 15, State 1, Procedure test, Line 4
Incorrect syntax near the keyword 'convert'.
Msg 137, Level 15, State 2, Procedure test, Line 8
Must declare the scalar variable "@BeginDate".
/* Stored Procedure*/
Create PROCEDURE test --test
@BeginDate varchar(10) = convert(varchar(10),getdate(),101)
as
select convert(datetime,@BeginDate)
Thanks!
View 9 Replies
View Related
Jan 24, 2008
Hi All,
Appreciate any help that you can offer, I have three tables that need data entered when the user completes a web form, in short the tables are
dbo.JBAClient
Which has
JBCID as PK and other data
dbo.JBAEmployee
Which has
JBEID as PK and JBEClientID as a Foreign Key and other data
dbo.JBAdvert
Which has
JBAID as PK, JBAEmployeeID as Foreign Key , JBAClientID as Foreign Key and other data,
The stored procedure that I've tried to write is supposed to create a new client record and enter all of the relevant data into the client table (store the JBCID) then Create a new Employee Record, insert all relevant data including (JBCID into JBEClientID) and (Store both JBCID & JBEID). Finally create a new advert record and store all of the relevant data including (JBCID as JBAClientID and JBEID as JBAEmployeeID)
The stored procedure that I have written works fine until the last section, where instead of inserting JBCID into JBAClientID and JBEID into JBAEmployeeID, it inserts JBEID into JBAClientID and JBEID into JBAEmployeeID
So inserting JBEID twice and ignoring JBEClientID........
the code is below,---
CREATE PROCEDURE PayPalCLient
@siteid int,
@companyname nvarchar(50),
@address nvarchar(500),
@phone nvarchar(50),
@fax nvarchar(50),
@email nvarchar(225),
@url nvarchar(225),
@companytype nvarchar(50),
@billingcontact nvarchar(50),
@name nvarchar(50),
@AccountType nvarchar(50),
@PASSWORD nvarchar(50),
@AccountLive nvarchar(50),
@EmployeeLevel nvarchar(50),
@adverttitle nvarchar(50),
@description nvarchar(500),
@category nvarchar(50),
@location nvarchar(50),
@payrate nvarchar(50),
@employmenttype nvarchar(50),
@reference nvarchar(50),
@startdate nvarchar(50),
@postfor INT,
@invoiced nvarchar(50),
@notified nvarchar(50),
@ppclient nvarchar(50),
@pppaid nvarchar(50)
AS
Declare @NewID INT
INSERT INTO dbo.JBClient(JBCLSiteID, JBCLName, JBCLAddress, JBCLPhone, JBCLFax, JBCLEmail, JBCLCompanyType, JBCLURL, JBCLAccountType, JBCLAccountlive, JBCLBillingContact)
VALUES (@siteid, @companyname, @address, @phone, @fax, @email, @companytype, @url, @AccountType, @AccountLive, @billingcontact)
DECLARE @NewID2 INT
SELECT @NewID = SCOPE_IDENTITY()
INSERT INTO dbo.JBEmployee(JBEClientID, JBESiteID, JBEName, JBELevel, JBEUsername, JBEPassword, JBEAddress, JBEPhone)
VALUES (@NewID, @siteid, @name, @EmployeeLevel, @email, @PASSWORD, @address, @phone)
SELECT @NewID = SCOPE_IDENTITY()
SELECT @NewID2 = SCOPE_IDENTITY()
INSERT INTO dbo.JBAdvert(JBAClientID, JBAEmployeeID, JBASiteID, JBATitle, JBADescription, JBACategory, JBALocation, JBAPayRate, JBAEmplymentType, JBAReference, JBAStartDate, JBAPostFor, JBAInvoiced, JBANotified, JBAPPClient, JBAPPPaid)
VALUES (@NewID, @NewID2, @siteid, @adverttitle, @description, @category, @location, @payrate, @employmenttype, @reference, @startdate, @postfor, @invoiced, @notified, @ppclient, @pppaid)
Appreciate any help that you can offer, I think the problem has something to do with --
SELECT @NewID = SCOPE_IDENTITY()
SELECT @NewID2 = SCOPE_IDENTITY()
Thanks again
View 3 Replies
View Related
Jul 25, 2006
I have the following stored proceduredrop procedure ce_selectCity;set ANSI_NULLS ONset QUOTED_IDENTIFIER ONGO-- =============================================-- Author: <Author,,Name>-- Create date: <Create Date,,>-- Description: <Description,,>-- =============================================create PROCEDURE ce_selectCity @recordCount int output -- Add the parameters for the stored procedure here --<@Param2, sysname, @p2> <Datatype_For_Param2, , int> = <Default_Value_For_Param2,, 0>AS declare @errNo int -- SET NOCOUNT ON added to prevent extra result sets from -- interfering with SELECT statements. SET NOCOUNT ON; -- Insert statements for procedure here select ciId,name from ce_city order by name select @recordCount = @@ROWCOUNT select @errNo = @@ERROR if @errNo <> 0 GOTO HANDLE_ERROR return @errNoHANDLE_ERROR: Rollback transaction return @errNoGoand i was just testing it likeProtected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load db.connect() Dim reader As SqlDataReader Dim sqlCommand As New SqlCommand("ce_selectCity", db.getConnection) Dim recordCountParam As New SqlParameter("@recordCount", SqlDbType.Int) Dim errNoParam As New SqlParameter("@errNo", SqlDbType.Int) recordCountParam.Direction = ParameterDirection.Output errNoParam.Direction = ParameterDirection.ReturnValue sqlCommand.Parameters.Add(recordCountParam) sqlCommand.Parameters.Add(errNoParam) reader = db.runStoredProcedureGetReader(sqlCommand) If (db.isError = False And reader.HasRows) Then Response.Write("Total::" & Convert.ToInt32(recordCountParam.Value) & "<br />") While (reader.Read()) Response.Write(reader("ciId") & "::" & reader("name") & "<br />") End While End If db.close() End SubIt returns ALL ROWS (5 in the table right now). So, recordCount should be 5. (When i run it inside SQL Server (directly) it does return 5, so i know its working there).BUT, its returning 0.What am i doing wrong??EDIT:Oh, and this is the function i use to execute stored procedure and get the readerPublic Function runStoredProcedureGetReader(ByRef sqlCommand As SqlCommand) As SqlDataReader sqlCommand.CommandType = CommandType.StoredProcedure Return sqlCommand.ExecuteReader End Function
View 5 Replies
View Related
Jun 23, 2004
Hi all.
1. I have a stored procedure, the procedure need create new category for forums, each category have their own place (what going first , what going second etc...), it's importent for me that all categories will be in property for them place, so i must read next place from table, and if not then i set it = 0 . But it's seems not working, i getting error.
Can somebody tell me please what wrong ?
ALTER PROCEDURE dbo.CreateCategory
(
@category_name varchar(100)
)
AS
declare @place int
/* setting place to zero */
SET @place = 0
/* trying to get last place and set value into @place */
SET @place = (Select max(category_place) FROM fo_categories)
/* if got nothing from table then setting value of first category */
IF (@place = 0)
set @place = 1
INSERT fo_categories (category_name, category_place)
VALUES(@category_name, @place)
RETURN
Running dbo."CreateCategory" ( @category_name = Public forums ).
Cannot insert the value NULL into column 'category_place', table 'mg_forum.dbo.fo_categories'; column does not allow nulls. INSERT fails.
2. I also would ask what SET NOCOUNT ON/OFF mean and for what i can use it ?
View 2 Replies
View Related
Dec 18, 2007
Hi Peeps
I have a SP that returns xml
I have writen another stored proc in which I want to do something like this:Select FieldOne, FieldTwo, ( exec sp_that_returns_xml ( @a, @b) ), FieldThree from TableName
But it seems that I cant call the proc from within a select.
I have also tried
declare @v xml
set @v = exec sp_that_returns_xml ( @a, @b)
But this again doesn't work
I have tried changing the statements syntax i.e. brackets and no brackets etc...,
The only way Ive got it to work is to create a temp table, insert the result from the xml proc into it and then set @v as a select from the temp table -
Which to be frank is god awful way to do it.
Any and all help appreciated.
Kal
View 3 Replies
View Related
Aug 3, 2006
In SQL Server for a field of datatype float(8),
if i insert a value 2.62 , it saves it as 2.6200000000000001
like so for other values also.
But in frontend i can see the right values.
Could any of you help me in fixing up this issue?
Thanks in advance.
~ chaitanya
View 1 Replies
View Related
Dec 28, 2006
So I have been building stored procedures and things were working fine until I hit something that I am sure is incredibly simple to do; however, i have having a hell of a time with it. Here is the code:#############################################ALTER PROCEDURE dbo.GetUserIdForUser @username NVARCHARASBEGINDECLARE @postedbyid UNIQUEIDENTIFIERSET @postedbyid = (SELECT UserIdFROM aspnet_UsersWHERE (UserName = @username))END###Which returns this### Running [dbo].[GetUserIdForUser] ( @username = jason ).No rows affected.(0 row(s) returned)@RETURN_VALUE = 0Finished running [dbo].[GetUserIdForUser].############################################# This is part of a much larger stored procedure, but this is the point of failure in the stored procedure I am trying to build. If anyone can tell me what I am doing wrong I would appreciate it. I have tried a few things that have resulted in different failures. If I remove any references to variables (delete SET @postedbyid = and replace @username with 'jason') I can get it to return a result. If I put @username in though it doesn't work. Here are the examples of those:ALTER PROCEDURE dbo.GetUserIdForUser @username NVARCHARASBEGINSELECT UserIdFROM aspnet_UsersWHERE (UserName = @username)END###Which returns this###Running [dbo].[GetUserIdForUser] ( @username = jason ).UserId -------------------------------------- No rows affected.(0 row(s) returned)@RETURN_VALUE = 0Finished running [dbo].[GetUserIdForUser]. Here is a sanity check to show that the data is in fact in the database:ALTER PROCEDURE dbo.GetUserIdForUserASBEGINSELECT UserIdFROM aspnet_UsersWHERE (UserName = 'jason')END Running [dbo].[GetUserIdForUser].UserId -------------------------------------- No rows affected.(1 row(s) returned)@RETURN_VALUE = 0Finished running [dbo].[GetUserIdForUser]. Anyone have any ideas on what I am doing wrong?
View 13 Replies
View Related
Aug 3, 2006
Hi,
When i try to insert a value in to a field of datatype float(8), it is storing the wrong values(approximate values).
For example, if i try to insert 2.62 , it takes it as 2.6200000000000001
But i can see the correct values displayed in the frontend.
Heard that there is a fix available for this issue.
Could any of you help me in getting the details about that fix?
Thanks in advance.
~ Chaitanya
View 4 Replies
View Related
Feb 19, 2006
Im trying to insert a record in my sql server 2005 express database.The following function tries that and without an error returns true.However, no data is inserted into the database...Im not sure whether my insert statement is correct: I saw other example with syntax: insert into table values(@value1,@value2)....so not sure about thatAlso, I havent defined the parameter type (eg varchar) but I reckoned that could not make the difference....Here's my code: Function CreateNewUser(ByVal UserName As String, ByVal Password As String, _ ByVal Email As String, ByVal Gender As Integer, _ ByVal FirstName As String, ByVal LastName As String, _ ByVal CellPhone As String, ByVal Street As String, _ ByVal StreetNumber As String, ByVal StreetAddon As String, _ ByVal Zipcode As String, ByVal City As String, _ ByVal Organization As String _ ) As Boolean 'returns true with success, false with failure Dim MyConnection As SqlConnection = GetConnection() Dim bResult As Boolean Dim MyCommand As New SqlCommand("INSERT INTO tblUsers(UserName,Password,Email,Gender,FirstName,LastName,CellPhone,Street,StreetNumber,StreetAddon,Zipcode,City,Organization) VALUES(@UserName,@Password,@Email,@Gender,@FirstName,@LastName,@CellPhone,@Street,@StreetNumber,@StreetAddon,@Zipcode,@City,@Organization)", MyConnection) MyCommand.Parameters.Add(New SqlParameter("@UserName", SqlDbType.NChar, UserName)) MyCommand.Parameters.Add(New SqlParameter("@Password", Password)) MyCommand.Parameters.Add(New SqlParameter("@Email", Email)) MyCommand.Parameters.Add(New SqlParameter("@Gender", Gender)) MyCommand.Parameters.Add(New SqlParameter("@FirstName", FirstName)) MyCommand.Parameters.Add(New SqlParameter("@LastName", LastName)) MyCommand.Parameters.Add(New SqlParameter("@CellPhone", CellPhone)) MyCommand.Parameters.Add(New SqlParameter("@Street", Street)) MyCommand.Parameters.Add(New SqlParameter("@StreetNumber", StreetNumber)) MyCommand.Parameters.Add(New SqlParameter("@StreetAddon", StreetAddon)) MyCommand.Parameters.Add(New SqlParameter("@Zipcode", Zipcode)) MyCommand.Parameters.Add(New SqlParameter("@City", City)) MyCommand.Parameters.Add(New SqlParameter("@Organization", Organization)) Try MyConnection.Open() MyCommand.ExecuteNonQuery() bResult = True Catch ex As Exception bResult = False Finally MyConnection.Close() End Try Return bResult End FunctionThanks!
View 1 Replies
View Related
Aug 23, 2007
When you create a Stored procedure, is it automatically stored under the default Filegoup?
How can I see under which Filegroup my Stored Procedures and Triggers are stored?
View 2 Replies
View Related
Sep 22, 2005
oConn = New SqlClient.SqlConnection
oConn.ConnectionString = "user id=MyUserID;data source=MyDataSource;persist security info=False;initial catalog=DBname;password=password;"
oCmd = New SqlClient.SqlCommand
oCmd.Connection = oConn
oCmd.CommandType = CommandType.StoredProcedure
oCmd.CommandText = "TestStdInfo"
'parameters block
oParam1 = New SqlClient.SqlParameter("@intSchoolID", Me.ddlSchl.SelectedItem.ToString())
oParam1.Direction = ParameterDirection.Input
oParam1.SqlDbType = SqlDbType.Int
oCmd.Parameters.Add(oParam1)
oParam2 = New SqlClient.SqlParameter("@dob", Convert.ToDateTime(Me.txbBirth.Text))
oParam2.Direction = ParameterDirection.Input
oParam2.SqlDbType = SqlDbType.DateTime
oCmd.Parameters.Add(oParam2)
oParam3 = New SqlClient.SqlParameter("@id", Me.txbID.Text)
oParam3.Direction = ParameterDirection.Input
oParam3.SqlDbType = SqlDbType.VarChar
oCmd.Parameters.Add(oParam3)
oConn.Open()
daStudent = New SqlClient.SqlDataAdapter("TestStdInfo", oConn)
dsStudent = New DataSet
daStudent.Fill(dsStudent) 'This line is highlighted when error happens
oConn.Close()The error I am getting :Exception Details: System.Data.SqlClient.SqlException: Procedure 'TestStdInfo' expects parameter '@intSchoolID', which was not supplied.I am able to see the value during debugging in the autos or command window. Where does it dissapear when it comes to Fill?Could anybody help me with this, if possible fix my code or show the clean code where the procedure called with multiple parameters and dataset filled.Thank you so much for your help.
View 2 Replies
View Related
Apr 26, 2015
I have an extremely annoying problem when debugging stored procedures in SQL Server 2014 with SSDT or SSMS. When calling a SP thru EXECUTE in Debug mode, 9 out of 10 SPs are traced with a wrong yellow arrow-pointer to the line currently reached.
The offset is between 6 to 15 lines downward. Tracing itself and update of the "Locals"-view works as expected. All SPs contain comments also before the Create Procedure statement. The SP shown when tracing show exactly the same content as the stored SQL in the SSDT project under work incl. Create procedure and all comments.
The picture here show the first line selected after the debugger has traced into the SP. The first line really executed with "Next" will be SET NOCOUNT ON.
If this does not turns out as my fault and some of you would support that, I would like to post this to SQL Connect.
View 4 Replies
View Related
Mar 10, 2005
I didn't want to maintain similar/identical tables in a legacy FoxPro system and another system with SQL Server back end. Both systems are active, but some tables are shared.
Initially I was going to use a Linked Server to the FoxPro to pull the FP data when needed. This works. But, I've come up with what I believe is a better solution. Keep in mind that these tables are largely static - occassional changes, edits.
I will do a 1 time DTS from FP into SQL Server tables.
I then create INSERT and UPDATE triggers within FoxPro.
These triggers fire a stored procedure in FoxPro that establishes a connection to the SQL Server and fire the appropriate stored procedure on SQL Server to CREATE and/or UPDATE the corresponding table there.
In the end - the tables are local to both apps.
If the UPDATES or TRIGGERS fail I write to an error log - and in that rare case - I can manually fix. I could set it up to email me from within FoxPro as well if needed.
Here's the FoxPro and SQL Server code for reference for the Record Insert:
FOXPRO employee.dbf InsertTrigger:
employee_insert_trigger(VAL(Employee.ep_pk),Employ ee.fname,Employee.lname,Employee.email,Employee.us er_login,Employee.phone)
FOXPRO corresponding Stored Procedure:
FUNCTION EMPLOYEE_INSERT_TRIGGER
PARAMETERS wepk,wefname,welname,weemail,WEUSERID,WEPHONE
nhandle=SQLCONNECT('SS_PDITHP3','userid','password ')
IF nhandle<0
m.errclose=.f.
IF !USED("errorlog")
USE tisdata!errorlog IN SELECT(1)
m.errclose=.t.
ENDIF
SELECT errorlog
INSERT INTO errorlog (date, time, program,source,user) ;
values (DATE(), TIME(), 'EMPLOYEE_INSERT_TRIGGER','nhandle<0 PARAMS: '+STR(wepk)+wefname+welname+weemail+WEUSERID+WEPHO NE,GETENV("username"))
IF m.errclose
USE IN errorlog
ENDIF
RETURN
ENDIF
nquery="exec ewo_sp_insertNewEmployee @WEPK ="+STR(wepk)+",@WEFNAME ='"+wefname+"',@WELNAME ='"+welname+"',@WEEMAIL ='"+weemail+"',@WEUSERID ='"+weuserid+"',@WEPHONE='"+wephone+"',@RETCODE =0"
nsucc=SQLEXEC(nhandle,nquery)
SQLDISCONNECT(nhandle)
IF nSucc<0
m.errclose=.f.
IF !USED("errorlog")
USE tisdata!errorlog IN SELECT(1)
m.errclose=.t.
ENDIF
SELECT errorlog
INSERT INTO errorlog (date, time, program,source,user) ;
values (DATE(), TIME(), 'EMPLOYEE_INSERT_TRIGGER','nSucc<0 PARAMS: '+STR(wepk)+wefname+welname+weemail+WEUSERID+WEPHO NE,GETENV("username"))
IF m.errclose
USE IN errorlog
ENDIF
ENDIF
RETURN
SQL SERVER Stored Procedure called from FOXPRO Stored Procedure
CREATE procedure ewo_sp_insertNewEmployee (
@WEPK int,
@WEFNAME char(20),
@WELNAME char(20),
@WEEMAIL char(50),
@WEUSERID char(15),
@WEPHONE char(25),
@RETCODE int OUTPUT
)
AS
insert into WO_EMP (
WE_PK,
WE_FNAME,
WE_LNAME,
WE_EMAIL,
WE_USERID,
WE_PHONE
)
VALUES (
@WEPK,
@WEFNAME,
@WELNAME,
@WEEMAIL,
@WEUSERID,
@WEPHONE
)
IF @@ERROR <> 0
BEGIN
SET @RETCODE=@@ERROR
END
ELSE
BEGIN
-- SUCCESS!!
SET @RETCODE=0
END
return @RETCODE
GO
View 2 Replies
View Related
Jul 19, 2007
Im trying to perform an update with a stored procedure thats all working but
an exception is thrown ....violation of primary key contraint....cannot insert duplicate pri key
I understand whats going on but how do you update some ones details if its protected this way.
?
View 3 Replies
View Related
Feb 22, 2008
I have a stored procedure , where i want to return identity column after insert but before insert i want to check if the record exist then select its identity value to return , after select statement it is retutrning null CREATE PROCEDURE SP_Attendance1 (@DIVISIONID int,@EMPLOYEEID int,@CALLDATE datetime,@RECEIVEDDATE datetime,@DOC datetime,@SYSTEMNAME VARCHAR(20),@DELETED int,@attendanceID int output) AS---DECLARE @ID intIF EXISTS (SELECT ID FROM TBLATTENDANCE WHERE EMPLOYEEID = @EMPLOYEEID AND YEAR ( CALLDATE ) = YEAR ( @CALLDATE)AND MONTH (CALLDATE) = MONTH ( @CALLDATE) AND DAY (CALLDATE) = DAY ( @CALLDATE) )BEGIN SET @attendanceID = SCOPE_IDENTITY()END ELSE BEGIN INSERT INTO TBLATTENDANCE (DIVISIONID ,EMPLOYEEID ,CALLDATE , RECEIVEDDATE ,DOC,SYSTEMNAME ,DELETED )VALUES (@DIVISIONID ,@EMPLOYEEID ,@CALLDATE , @RECEIVEDDATE ,@DOC,@SYSTEMNAME ,@DELETED ) ;SELECT DIVISIONID, EMPLOYEEID, CALLDATE, RECEIVEDDATE, DOC, SYSTEMNAME, DELETED,ID FROM TBLATTENDANCE WHERE (ID = SCOPE_IDENTITY())SELECT @attendanceID = SCOPE_IDENTITY()ENDGO Kindly help with this
View 5 Replies
View Related
Jan 15, 2004
Hi,
I am trying to create a stored proc, that delivers a recordset, per the user requirements BUT,
I want to create a Geneirc search Proc that can handle a few criteria
I was wondering if it is possible to create a VB like Select case
depending on Information supplied to the stored proc
i.e
@Loc_Thing
@Loc_OtherThing
SELECT FirstName,LastName,CIty,Job,,Company,Webpage FROM RECORDSET WHERE
Select case @Loc_Thing
Case "Mickey"
LastName = @Loc_OtherThing
Case "Walt"
Company = @Loc_OtherThing
...... etc
is it possible to create a strored proc like this?
I have found a Select case in SQL, but it doesn't work I would like it?
Any Idea's?
View 1 Replies
View Related
