Hi,
I have dropdown parameter with multi-values allowed.
In my report headed I want to show all the dropdown values that were checked by the user to run the report. But since there could be a couple of hundred values I want to show ALL when all the values are selected instead of listing them one by one.
How can I do that?
Thanks,
Igor
Hi ,
I am working on Sql server Reporting Services(Sql Server 2005),
i have designed a Report and deployed that report on Report Server, on this report i need to show the user selected values
in page header by using Parameters which i have already created in the Report.
There are 35 to 40 fields in the Front End(Asp.net2.0)
on passing all these values from front end Report is prompting for parameters which is not desired for my case even though i have made ShowParameterPrompts to false.
Thanks in advance
Srinivas Govada
Hi All,
I have requirement where first I need to show only one report
parameter. Based on user selection I need to prompt or show the user
another report parameter.
Say suppose I have 3 parameters. User selects first value in first
parameter I should not show the other 2 parameters. If user selects
second value in first parameter I should show second parameter and
hide third parameter. There is no relationship between these 2
parameters except user selection. Similarly if user third value in
first parameter then I should show third parameter and hide second
parameter.
Is this possible? I can not see any Visible property for report
parameters.
If yes, how to achieve this functionality?
Appreciate your help.
Regards,
Raghu
There is a multi value parameter called "include" in the report where "Allow Multiple Values" is checked and it has 4 Available values as shown in the attached screen shots and preview of the report is also shown .There is no data set for this parameter and the values will get displayed on the report based on the visibility condition set in the report.Example : If first value is selected then 1 is passed and based on the visibility condition set in the report - the report output is displayed.None is default value and has value 4 and when the report is run with this option i.e. "None" then rest three parameter values are not applicable .
Requirement :
-When the end user selects (Select All) Check box then (None)
-check box must be disabled or must not appear for selection for the end user
-When the end user selects check boxes either of the first three except None then also None check box must be disabled or must not appear for -selection for the end user
-when the end user selects a combination of first three then also None check box must be disabled or must not appear for selection for the end user
-The None is set as default with a value as 4 and is applicable only when the user does not select either of the first three values and the report will run.
I have a report that has 2 dropdowns, selecting from the first dropdown populates the second one. This works fine in the BI Studio.
When I deploy this report to the 'Report Manager' and make a selection from the first dropdown, the second dropdown loads (as expected). I tried to select from the second dropdown (which has only 1 item - which is correct), the dropdown does not appear correctly - as in, I can't see that item.
Since we can't attach anything here, below is the link to a screenshot of my issue:
http://docs.google.com/View?docid=ddd6j2xn_52c5qd5
If you look closely at the screenshot from the link above, you'll see that there is a value in the second dropdown - it just won't show completely - as if the dropdown is not rendering correctly. I can view source on the page and see that the dropdown has a value.
What appears to be happening is the if only 1 item is in the second dropdown and that item is longer than the size of the dropdown, the dropdown won't render.
Here is my value for the second dropdown '012 Candy Gadler David Thapero'. This is the only value in the second dropdown. - You can try 35 chars or more in the dropdown to confirm.
Notes:
+ No special chars are in either dropdown
+ I am using IE 7 (Also had someone test this on IE 6 - same problem)
+ Using Visual Studio 2005 to build report - where this works fine
Work around:
+ If I add another item to the dropdown via a UNION query, I see the original value + the new item in the dropdown #2
Please share your thoughts
Thanks,
h.
I pass in 3 querystring parameters to my web form. The Object Data Sources pick up these parameters
and select the appropriate records.
I want to display one of the querystring parameters in my Page Header, specifically the one for Fiscal Year.
I could return the Fiscal Year in a column from the data source, but the Fiscal Year would not populate if
no records were returned...Therefore, I must get the querystring parameter that was originally passed in...
How do I populate the report control textbox with the value of querystring parameter?
Thanks!
Jim
Does anyone know how to control the width of the parameter dropdownlist? If you select "Multi-value" for the parameter (non-sp1 version) the parameter list is in a dropdownlist that is manageable in size. If you do not use the multi-value parameter, it looks like the width of the dropdownlist is determined by the width of the longest text of the returned parameters.
Is there any way to control the width of the dropdown?
Thanks
Rob
I have the SQL query. If the user is selecting all the vendor Numbers available in the vendor number parameter drop down then, I will not include the vendor Number condition in the where portion of the sql query. For that I want to know whether the user has selected all the values available in the drop down. How to identify this?
View 3 Replies View Relatedi have a stored procedure that has parameters. this dataset is used in a crystal report. the parameters are in the sp and will return records if a value is selected. i would like to return records if one parameter or all parameters are selected.
there are 3 parameters, date range, receipt, po #
if i select a distinct value and leave the others null, or 2 values 1 null etc, i would like to return the records, i am having trouble with the syntax. thank you
How does one return all selected values in a multi-valued parameter? Right now i have a filter on the dataset where
(Expression)
=Fields!LOCATION_ID.Value
(Operator)
=
(Value)
=Parameters!Loc.Value(0)
This is just giving me data from the first value that is selected in the multi-valued dropdown. I need all returned from the parameter. Any ideas.
I have a requirement for the following SSRS expression ( I am using Report Builder 3.0). The end user will input a selection via a mutli select parameter (financial month/s), if all month are inputted then sum(Field1.Month1.value...Field12.Month12.value )/12 * 100 else if parameter.value =1 then sum(field/s.values for selected month)/1 *100 else if month.values = 1 AND 2 then sum(field/s.values for selected month)/2 *100 and so on for any combination of the selected inputs.
Put in simpler terms I would like to calculate a percentage from a field/s containing relevent values, based on month/s the user inputs.
How would I reference the selected value of a dropdown parameter in SSRS using VS2005?
For instance, the city Miami is selected I want to find out if both dropdowns match eachother...
iif(dropdown1.selected.value = dropdown2.selected.value,false,true)
Hi All ..
Well i have three parameters, first two are interedependent . i.e. the second parameter dependent on the first one. In other words when i select the first one then that automatically selects or sets values to the second. In the mean while i have the third parameter that is not dependent on the first two. when the report loads, first and the third parameters highlights for selection. I don't want the third parameter available for selection unless the second parameter is selected. How can it be possilbe?
Regards and thanks in advance for your replies
How to show the CurrentMonthanddateandyear in my report header in ssrs?
1.How to show the currentdateandMonthyear exmple date format like June 29 2015 on my report header.
2.How to change the report rdl name with the same name like EmpUpdatedreportJune 29 2015.rdl ,it is possible to create and change the rdl file name with the current dateandmonth.
I run these stored procedure to build the report and I am able successfully to build the report but I need some prompts to in the report to get the specific data .
ALTER
PROCEDURE [dbo].[Sharepoint_Ticket_Report]
@StartDate
DATETIME,
@EndDate
[Code] ....
And for prompts how to create created_by and message_type dropdowns as shown in picture.
Hi All,
I have a report parameter which i multivalue. I want to display the selected value in a text box. I have written the following code :
=Switch(Parameters!ServiceAttribute.Count = 1,Parameters!ServiceAttribute.Value(0),
Parameters!ServiceAttribute.Count = 2,(Parameters!ServiceAttribute.Value(0) & ", " & Parameters!ServiceAttribute.Value(1)))
Which suggests that if only one of the two multivalue parameter id is selected display the same (Parameters!ServiceAttribute.Value(0)).
This works fine when i select both the attributes but throws an exception "Index was outside the bounds of the array" when i select only one of the parameters. Can anyone help me with that?
Also i want this report parameter to allow null i.e. if a user does not select anything he should still be able to view the report.
In case of regular dropdowns i have added a <Null> value to the existing values and set the default to null. But in case of multi-value, it does not give an option of adding <Null>
hi,
i am using ssrs 2005 and need to pass the multi selected parameter values to another report. how can i achieve this task? I use jump to report option.
Hi,
I am experiencing some problems calling reports in ReportServer using URL.
I have several multivalue parameters that are not being set through the URL. The values for this parameters should be the default ones that I have set in VS.
When I preview the report in VS, the default values are correctly set but, when using the URL call, I keep being prompt for this parameters and the report is not rendered until I set them manually.
Does anyone ever had this problem?
Thank you in advance
Catarina Ribeiro
I have a report parameter named "Schools" which display a list of schools. For example, Alo elementary school, Balo middle school and Calo high school.
When "Alo elementary" is selected the report only display students from that school along with other assessments data fields. same goes for other schools too. But I want to display different data fields for "Calo high school" when it is selected. It is not currently possilbe becasue I am using the same template for all types of schools. There some fields only should be displayed for "Calo high school" but not for any other type of schools.
I can accomplish this by creating two separate report, one for "Calo high school" and the other for other schools. But I want to accomplish this just by creating one report. So when "Alo elementary school" is selected it displays report with certain fields and when "Calo high school" is selected then it displays same fields as "Alo elementary school" but as well as some other fields too in the report. Is this possible? Need help.
I have a power pivot with 2 multi valued report filters student_branch & blood_group. These report filters are used to fetch the data set that contain below result set
student_branch blood_group count
Everything works fine. But, what i am looking for , is there any way to show the what are all the report filters that are selected currently by , separated in a separate cell ? below is the image for output reference.
Hi all,
I'm trying to embed a report into a CRM IFrame. So I have the report created in Business Intelligence Visual Studio 2005, but I need to display it with none of the header details SRS displays by default.
Using the following URL I included rc:toolbar=false and rcarameters=false but they don't seem to make any difference. I basically need to display the report content as if it were part of that page and not an SRS hosted page.
https://server/Reports/Pages/Report.aspx?ItemPath=%2fAllpress_MSCRM%2fCustomReportsForCRM%2fa&rs:Command=Render&rc:toolbar=false&&rcarameters=false&rs:ClearSession=true&type=1&typename=account&orgname=Allpress&userlcid=1033&orglcid=1033
Anyone have some pointers for me?
Kia
Hi all,
I'm trying to embed a report into a CRM IFrame. So I have the report created in Business Intelligence Visual Studio 2005, but I need to display it with none of the header details SRS displays by default.
Using the following URL I included rc:toolbar=false and rcarameters=false but they don't seem to make any difference. I basically need to display the report content as if it were part of that page and not an SRS hosted page.
https://server/Reports/Pages/Report.aspx?ItemPath=%2fAllpress_MSCRM%2fCustomReportsForCRM%2fa&rs:Command=Render&rc:toolbar=false&&rcarameters=false&rs:ClearSession=true&type=1&typename=account&orgname=Allpress&userlcid=1033&orglcid=1033
Anyone have some pointers for me?
I'm using a form that has a dropdown control. This dropdown control has items that can be selected that serves as a filter for displaying results on the page that is returned from a stored procedure call. I'm having trouble finding a way to execute the stored procedure to display the filtered results everytime a different item in the dropdown gets selected. Currently, the form does get submitted and the selected item does get saved, but the stored procedure never gets executed on a postback. Any ideas on resolving this issure? Your help is much appreciated.
View 1 Replies View Related
Is it possible to get the reportdataset field values into parameters. dynamically when the report is generated.
Thanks.
Using SSRS 2008 r2...I have a report with a single-value parameter and three multi-value parameters, Class1, Name2 and Name3. I'm hoping for an explanation to one thing that I'm seeing and information on a second thing.
Class1 and Name2 both have the (Select All) parameter selected but Class1 is displaying the concatenated parameter variable list whereas Name2 is showing Null. Why is that? If anything, how can I get Class1 to be similar to Name2 and show Null?But my desired wish is to have Class1, Name2 and Name3 display the text"All Selected" when the parameter (Select All) is chosen.
I am using RDLC report with Microsoft visual studio 2005. In the first page of rdlc i have two text boxes and one table in body section. In the second and subsequent pages i want to repeat the data from textbox1 and textbox2 along with table data continuation of page1.
Currently the continuation of table data from page1 to page2 is working properly. But the textbox1 and textbox2 data also needs to be repeated in every pages.
I tried the following steps, but fails to work.
1. added two text boxes in header section and another two text boxes in Body section.
2. Assigns the dataset value to textboxes in body section.
(Ex: =first(Fields!Address.Value)
3. Assigns the textboxes value from Body section to the corresponding text boxes in header section.
(Ex : =first(ReportItems!textbox1.Value))
Result:
The header text box value displayed in the first page only and not repeated in the subsequent pages.
Expected:
Whatever assigned to the header section should be repeated in the subsequent pages. But only page number, date... is reflecting in other pages and not the text box values in header section.
Kindly give me the solution.
Thanks in advance.
Hi,
I've designed a report and assigned it a datasource that binds with a SP with a parameter. In the XML code of the dataset I can see the input parameter has been recognised by the wizard. Then, I built a report with that Dataset as the source. Everything is fine till this time. Now through my aspx code I pass on the value of the parameter to the report. But the report doesn't show any values at all. The aspx code is like
Code Snippet
Dim reportParameter As New ReportParameter("@UserID", Convert.ToInt32(TextBox1.Text), True)
Dim test() As ReportParameter = {reportParameter}
ReportViewer1.LocalReport.SetParameters(test)
Any ideas what I could be doing wrong?
VS 2005 & SSRS 2005.
TIA.
Dataset "FromTimeDimension" is a report parameter and has values (yyyymm)= 200601,200602,200603,2000604....... I would like to always have the default for this parameter to always be the latest month...ie November is the most recent month in our cube, so I would want the parameter to default to "200611". However, when I try to use the "last" function, the error says that aggregate function cannot be used.
View 3 Replies View Related
I have my stored procedure set to
Territory_code IN (@Territory)
, now , how do i enter in more then one value. When i select the multi value check box, it gives me more spaces. But then doesnt recognize the values when i put in more then one. am i doing something wrong?
The field is a Varchar 20
I have code
Function GetDealCount(reportItems)
return iif(IsNothing(reportItems!txtDetailCountRows.Value), 0, reportItems!txtDetailCountRows.Value)
End Function
Function GetSumNotionalAmount(reportItems)
return iif(IsNothing(reportItems!txtDealSumNotionalAmount.Value), 0, reportItems!txtDealSumNotionalAmount.Value)
End Function
That I am calling from a textboxes in the page header
= Code.GetDealCount(ReportItems) & " Deal(s)"
also
= Parameters!BaseCurrency.Value + " " + Format(Code.GetSumNotionalAmount(ReportItems),"N2").ToString().Replace(",","'")
When I preview the report in VS.NET I get values showing.
When I deploy the report I just get #Error showing.
Also this report used to work fine in RS2000
Does anyone know the cause of this issue?
I am designing a report which will be used under the subreport control of a master report, now i am using a stored procedure for the subreport which has two parameters.
In the subreports dataset parameters tab, how can i mention the master reports columns, since i do not see the master reports columns here. since it is a different report.
If i use a hardcoded select query then i can just say
select address, city, state, zipcode from customer where (customerid = @customerID)
but i am using a stored proc. how to define the parameters under datasets parameter tab.
Thank you very much for the information.
Hi, How can I display a value of a report parameter from one report into a textbox on another report??
View 1 Replies View Related
Hi all,
In my cube there is a customer dimension and a product dimension.
If I filter on a single customer, and then click on the filter dropdown for product, all of the products for every customer are shown.
Is it possible to make it so it only show the members for the customer selected?
I suspect the answer is no, as that would mean you can't untick any previously ticked members, but our account management team have got the right hump about them showing so I need to at least attempt it.
Regards,
Phil