How do I Use the insert code below only if a record does not exist in the cisect table? Then if it exists I just want to
update cisect
set ml_desc_0 = cus_type_desc
from artypfil_sql A join cisect c on a.cus_type_cd = c.sct_code
INSERT INTO [002].[dbo].[cisect]
([sct_code]
,[ml_desc_0]
,[syscreated]
,[syscreator]
[code]....
Im using a store proc in SQL server.I use one table to store my hockey statistics data of each player in the league.When i submit my form i would like to check if there is any sheet of that player that allready exist .. If so then i do update.. if it does not exist i do the insert statement.Here the way i figured it out ! One store proc to do the work of the insert or update. And one to check if the player exist in the statistics table. But i just cant find a way to return a good value from my second store proc. Does my logic make sence ? any ideas ?thank you<code>create procedure Hockey_Player_UpdateForwardStatistics
@LeagueID int, @GamePlayerID int, @Games int
as
declare @PlayerID int
@PlayerID = Hockey_CheckPlayerStatistics(@LeagueID, @GamePlayerID)
if @PlayerID = 0begininsert into Hockey_PlayerStatistics( Games)values( @Games)end
ELSE
beginupdate Hockey_PlayerStatistics set Games = @Gameswhere LeagueID = @LeagueID and PlayerID = @PlayerIDend</code>
OK,
This is an Update that I have working, But what do I do, if the customer does not exist already it doesn't add the customer? How should I remedy this? if the customer does exist works great.
UPDATE AC
SET CustId = Left (CustomerId,10),
CustName = Left (CustomerName,25),
Addr1 = Left (Address1,25),
Addr2 = Left (Address2,25),
City = Left (ca.City,15),
Region = Left (State,2),
PostalCode = Left (Zip,5)
FROM RIO.dbo.tblArCust AC INNER JOIN
(SELECT CustomerCode, MAX(LastUpdatedDate) MaxDate
FROM COFFEE.dbo.vueCustomerAddress
GROUP BY CustomerCode) V
ON V.CustomerCode = AC.CustId
INNER JOIN COFFEE.dbo.vueCustomerAddress CA
ON CA.CustomerCode=V.CustomerCode AND
MaxDate=LastUpdatedDate
WHERE CA.addresstypeid = 1
Hi,
I'm completely stuck in here.
I have two tables, for simplicity i'll call them tbl_X and tbl_Y and i'll call the unique key Ukey
I need to create a stored procedure that must be run daily on a scheduled time. When executed, it must compare these two tables and insert rows from tbl_X into tbl_Y when a row exists in tbl_Y but not in tbl_X.
The following code returns the rows that are in tbl_Y, but not in tbl_X:
----------
SELECT Ukey
FROM tbl_X
WHERE NOT EXISTS
(SELECT Ukey
FROM tbl_Y
WHERE tbl_Y.Ukey = tbl_X.Ukey)
----------
But....how do i insert these rows into tbl_X ?
I've tried to declare the tbl_Y.Ukey and use that to do an INSERT statement, but that didn't work out.
Any help or example code is highly appriciated!
I have two tables that I have to compare:
Table:PR
WBS1 WBS2 WBS3
123-456 1000 01
123-456 1000 02
123-456 2000 02
567-890 2000 01
567-890 2000 02
Table:PR_Template
WBS2 WBS3
1000 00
1000 01
1000 02
2000 00
2000 01
2000 02
After Insert I should have:
wbs1 wbs2 wbs3
123-456 1000 00
123-456 1000 01
123-456 1000 02
123-456 2000 00
123-456 2000 01
123-456 2000 02
567-890 1000 00
567-890 1000 01
567-890 1000 02
567-890 2000 00
567-890 2000 01
567-890 2000 02
Basically, I need to insert the wbs2 and wbs3 where it does not exist in each wbs1.
What I have now will find the values that need to be inserted for a particular project but I don't know how to go through each project and perform the insert:
Select * from PR_template Where Not Exists
(Select Wbs1, Wbs2, Wbs3 from PR where PR.WBS2 = PR_Template.WBS2
And PR.WBS3 = PR_Template.Wbs3 and pr.wbs1 = '123-456')
Order by wbs2, wbs3 asc
Thank You
I am trying to come up with one statement that will INSERT a row if the primary key does not exist but APPEND if it does
Would the following statement be correct?
INSERT INTO Products (a,b,c) VALUES (2, Cotton Socks, $12) ON DUPLICATE KEY (b=Cotton Socks), (C=$12)
where a is the primary key?
I've got an access table with about 2 million rows. I'm using this to update a table in SQL that holds pretty much the exact same data, only with an added Identity column.
From week to week, the access table grows. For example, next week it may have 2.1 millions rows, the week after 2.2 million, etc.
The goal of the DTS is to keep the SQL table up to date w/ the access one. In the past, this has been done by deleting everything from the SQL Table and then importing the ENTIRE access table. This not only takes more time then need be, since the majority of the records *already* existed, but it also threw referential integrity out the door - other tables should be referencing the Identity in the SQL Table. IDEALLY, the only rows that would be transferred from the access file are ones that don't already exist in the SQL table.
I don't want to re-invent the wheel, and have to confess being a little under-schooled on all that SSIS has to offer. Is there a Data Flow Transformation that would solve this?? Any other advice? If all else fails, I'd probably just dump the entire access table to a temp table and then insert vals into the production table that don't exist, but even this would require more temp hard drive space then I'd like.
Thanks!
Hi,
I'm having a few problems. It's probably a simple thing but I can't figure it out.
I need to add data to a table but only if it isn't already in the table.
This is my query so far...
sqlcmd.CommandText = "Insert into caseDetails (c#,fe,cl) Values(@a,@b,@c)"
I assumed that if I added
WHERE not exists (case# = @a)
It would work and insert when the c# doesn't equal @a but all I get are errors.
Can anyone help?
Thanks,
Steve
i need to write a query that insert in A table if and only if the row does not exist already in the table (the source is a select statement).
i tried the following:
insert into [A]
select * from [B]
where Not EXISTS (select * from [A])
table [A] is still empty, but it does not insert any thing! .. what i know is that the EXIST checks if the selected row exists in the subquery, ain't ?
I am trying to put together a Stored Procedure that runs other SP's based on a records found condition. Sometimes my update table either by deleting duplicates or for other reasons is empty. Running a SP to update records on a table is not needed.
IF EXISTS (SELECT TOP 1 * FROM Work_Tables.dbo.Trace_Return_Updates WHERE TR_RecType = 'CT1')
BEGIN
EXEC IMB_Trace_Data.dbo.Update_CT1_Trace_Data
END
IF EXISTS (SELECT TOP 1 * FROM Work_Tables.dbo.Trace_Return_Updates WHERE TR_RecType = 'CT2')
BEGIN
EXEC IMB_Trace_Data.dbo.Update_CT2_Trace_Data
END
IF EXISTS (SELECT TOP 1 * FROM Work_Tables.dbo.Trace_Return_Updates WHERE TR_RecType = 'FULF')
BEGIN
EXEC IMB_Trace_Data.dbo.Update_FULF_Trace_Data
END
Someone help me out .How to solve the problem.I built a stored procedure in MS SQL 2005 to bulk insert into a table by reading the .txt file. But my stored procedure throws an error. "Could not bulk insert. File ' @PathFileName ' does not exist." My stored given below :- CREATE PROCEDURE [dbo].[ps_CSV_Import] AS DECLARE @PathFileName varchar(2000) ----Step 1: Build Valid BULK INSERT Statement DECLARE @SQL varchar(2000) SELECT @PathFileName="D:Areazone.txt" BEGIN SET @SQL = "BULK INSERT Temp FROM '"+" @PathFileName "+"' WITH (FIELDTERMINATOR = '"",""') " END --Step 2: Execute BULK INSERT statement EXEC (@SQL) --Step 3: INSERT data into final table INSERT mstArea(Description,Refid) SELECT SUBSTRING(Description,2,DATALENGTH(Description)-1), SUBSTRING(RefId,1,DATALENGTH(RefId)-0) FROM Temp --Step 4: Empty temporary table TRUNCATE TABLE Temp Please help me ,if someone have any solution
View 26 Replies View RelatedHi guys,i have a little problem here.im attempting to write a stored procedure that compares two tables ofthe same data structure and adds (inserts) extra records that exist intable1 to table2.My problem is that i dont have a unique identifier between the tables.i think someone said that i needed to build up a keyany ideas greatly appreciated ??C
View 1 Replies View RelatedSomeone help me out .How to solve the problem.I built a stored procedure in MS SQL 2005 to bulk insert into a table by reading the .txt file. But my stored procedure throws an error."Could not bulk insert. File ' @PathFileName ' does not exist."My stored given below :-CREATE PROCEDURE [dbo].[ps_CSV_Import]AS DECLARE @PathFileName varchar(2000) ----Step 1: Build Valid BULK INSERT Statement DECLARE @SQL varchar(2000) SELECT @PathFileName="D:Areazone.txt" BEGIN SET @SQL = "BULK INSERT Temp FROM '"+" @PathFileName "+"' WITH (FIELDTERMINATOR = '"",""') " END--Step 2: Execute BULK INSERT statementEXEC (@SQL)--Step 3: INSERT data into final tableINSERT mstArea(Description,Refid)SELECT SUBSTRING(Description,2,DATALENGTH(Description)-1), SUBSTRING(RefId,1,DATALENGTH(RefId)-0) FROM Temp--Step 4: Empty temporary tableTRUNCATE TABLE TempPlease help me ,if someone have any solution
View 11 Replies View Relatedhelp on CREATE stored procedure delete and after insert where not exist
in one stored procedure
in table_B
Code Snippet
CREATE PROCEDURE [dbo].[delete_from_table_B]
@empID varchar(500)
as
DELETE FROM table_B
WHERE charindex(','+CONVERT(varchar,[empID])+',',','+@empID+',') > 0
---HELP from this ponit how to insert ? after where not exist
IF @@ROWCOUNT > 0
BEGIN
insert into
table_B
set (empID,ShiftDate,shiftType)
where not exist
select
empID,ShiftDate,shiftType
from
table_A
table_A
empID fname ShiftDate shiftType
----------------------------------------------------
111 aaaa 15/03/2008 1
111 aaaa 16/03/2008 2
111 aaaa 18/03/2008 3
111 aaaa 19/03/2008 4
111 aaaa 20/03/2008 5
111 aaaa 21/03/2008 6
999 qqq 21/03/2008 9
222 bbb 02/05/2008 7
222 bbb 03/05/2008 8
222 bbb 04/05/2008 9
222 bbb 05/05/2008 7
222 bbb 06/05/2008 9
222 bbb 07/05/2008 3
222 bbb 08/05/2008 4
222 bbb 09/05/2008 5
333 ccc 03/04/2008 9
333 ccc 04/04/2008 2
TABLE B
empID fname ShiftDate shiftType
----------------------------------------------------
111 aaaa 15/03/2008 1
111 aaaa 16/03/2008 2
111 aaaa 18/03/2008 3
111 aaaa 19/03/2008 4
111 aaaa 20/03/2008 5
111 aaaa 21/03/2008 6
TNX for the help
Hello
I am trying to bulk insert a text file into SQL 2005 table. When I execute the bulk insert I get the error
"Msg 4860, Level 16, State 1, Line 1. Cannot bulk load. The file "\ENDUSER-SQLEnduserTextB1020063.txt" does not exist."
The text file that it is saying does not exist I recently created thru my code. I can open the file but only when I rename the file will the Bulk Insert work. After creating the text file I am moving it to the server that SQL server is running on. Also if I run sp_FileExists it also says the file does not exist unless again I rename the file then this stored procedure recognizes the file. I dont' know if I have a permission issue or what is the problem. Any help would be appreiated.
Thanks
Chris
question need help
how can i use this code below not for insert
i need it for update another table but only if exist
the link to the code in this FORUM
http://forums.microsoft.com/MSDN/AddPost.aspx?PostID=3208536&SiteID=1&Quote=True
Adam Haines wrote:
GPS,
Since you have such a dependency on dates and date calculations, you should implement a calendar table. A calendar table will make calculation such as this much more simplistic.
Calendar table link http://sqlserver2000.databases.aspfaq.com/why-should-i-consider-using-an-auxiliary-calendar-table.html.
Note the calendar table I use is a little different than this one. The only thing you will need to change is isodate to dt.
Now the code to get the results you need:
Code Snippet
declare @t table(
id int,
fname char(4),
Start_Date datetime,
End_Date datetime,
val_holiday int
)
insert into @t values (111, 'aaaa', '3/15/2008', '03/21/2008', 1 )
insert into @t values (222, 'bbbb', '05/2/2008', '05/9/2008', 3)
insert into @t values (333, 'cccc', '04/3/2008', '05/15/2008', 4)
insert into @t values (333, 'cccc', '04/29/2008', '07/07/2008', 1 )
select id, fname, cal.ISODate, val_holiday
from @t t1
inner join Calendar cal
on cal.isodate >= t1.start_date and
cal.ISODate <= t1.end_date
is possible to do it
TNX
I am using INSERT into Vendors (.....) VALUES (....) form of insert statement. How can I make sure that the insert fails if thie new vendor's vendorname exists?
I cannot create a unique index on 'VendorName' column since it is more than 900 bytes and SQL Server will not allow to create index on a column bigger than 900 bytes.
CREATE TABLE #MyTable
(
Teams VARCHAR(10),
StartDate DATETIME,
Count INT
)
INSERT INTO #MyTable (Teams,StartDate,Count)
SELECT 'Team A', '01/01/2014',10
[Code] ....
'Team A' Has No records for '01/02/2014' and '01/03/2014' so I need to insert values of '01/01/2014' StartDate for Team A for the missing dates
So 'Team A' will now have 3 records
Team A2014-01-01 00:00:00.00010
Team A2014-01-02 00:00:00.00010
Team A2014-01-03 00:00:00.00010
'Team B' Has No records for '01/03/2014' so I need to insert values of '01/02/2014' StartDate for Team B for the missing date
So 'Team B' will now have 3 records
Team B2014-01-01 00:00:00.00030
Team B2014-01-02 00:00:00.00040
Team B2014-01-03 00:00:00.00040
As for 'Team C' we have values for all 3 dates, no inserts needed.
Can I delete the record if it exist before we do an insert at the DataFlow level base on a key of the record we are working on? Basically we want to keep history records and delete and reinsert any records that exist in the table.
View 5 Replies View RelatedI am working on SSIS wehre I need to work on a flat file as a source and needed to import it to database. If the destination table have the record already, I need to update it and if not exist, I just need to import the whole data.
View 9 Replies View RelatedMy colleague is working on bulk insert task from SSIS and since the data file does not contain any valid delimeter one of the suggestion he got is to use a file format to address the issue. Thus a bcp command is used to generate the format file, as per below.
bcp <database name>.dbo.<table name> format nul -T -S <server name> -n -f out.fmt
The file file format was generated, from the data flow we added the BULK INSERT task and set the properties accordingly including the File Format and location of the file. Upon running the task itself we encountered the error as per below.
[Bulk Insert Task] Error: An error occurred with the following error message: "Cannot bulk load. The file "C:HFISTAT.fmt" does not exist.".
Progress: The Bulk Insert task is completed. - 100 percent complete
Task Bulk Insert Task failed
Have checked the file and it is in C: drive and it is not protected or read-only. Validated the output file and it is as per expected. Any help would be appreciated very much.
If I have a table with 1 or more Nullable fields and I want to make sure that when an INSERT or UPDATE occurs and one or more of these fields are left to NULL either explicitly or implicitly is there I can set these to non-null values without interfering with the INSERT or UPDATE in as far as the other fields in the table?
EXAMPLE:
CREATE TABLE dbo.MYTABLE(
ID NUMERIC(18,0) IDENTITY(1,1) NOT NULL,
FirstName VARCHAR(50) NULL,
LastName VARCHAR(50) NULL,
[Code] ....
If an INSERT looks like any of the following what can I do to change the NULL being assigned to DateAdded to a real date, preferable the value of GetDate() at the time of the insert? I've heard of INSTEAD of Triggers but I'm not trying tto over rise the entire INSERT or update just the on (maybe 2) fields that are being left as null or explicitly set to null. The same would apply for any UPDATE where DateModified is not specified or explicitly set to NULL. I would want to change it so that DateModified is not null on any UPDATE.
INSERT INTO dbo.MYTABLE( FirstName, LastName, DateAdded)
VALUES('John','Smith',NULL)
INSERT INTO dbo.MYTABLE( FirstName, LastName)
VALUES('John','Smith')
INSERT INTO dbo.MYTABLE( FirstName, LastName, DateAdded)
SELECT FirstName, LastName, NULL
FROM MYOTHERTABLE
I have a web form with a text field that needs to take in as much as the user decides to type and insert it into an nvarchar(max) field in the database behind. I've tried using the new .write() method in my update statement, but it cuts off the text after a while. Is there a way to insert/update in SQL 2005 this without resorting to Bulk Insert? It bloats the transaction log and turning the logging off requires a call to sp_dboptions (or a straight-up ALTER DATABASE), which I'd like to avoid if I can.
View 6 Replies View RelatedI'm working on inserting data into a table in a database. The table has two separate triggers, one for insert and one for update (I don't like it this way, but that's how it's been for years). When there is a normal insert, done via a program, it looks like the triggers work fine. When I run an insert manually via a script, the first insert trigger will run, but the update trigger will fail. I narrowed down the issue to a root cause.
This root issue is due to both triggers using the same temporary table name. When the second trigger runs, there's an error stating that a few columns don't exist. I went to my test server and test db and changed the update trigger so that the temporary table is different than the insert trigger temporary table, the triggers work fine. The weird thing is that if the temporary table already exists, when the second trigger tries to create the temporary table, I would expect it to fail and say that it already exists.I'm probably just going to update the trigger tonight and change the temporary table name.
Hello
I've to write an trigger for the following action
When a entry is done in the table Adoscat79 having in the index field Statut_tiers the valeur 1 and a date in data_cloture for a customer xyz
all the entries in the same table where the no_tiers is the same as the one entered (many entriers) should have those both field updated
statut_tiers to 1
and date_cloture to the same date as entered
the same action has to be done when an update is done and the valeur is set to 1 for the statut_tiers and a date entered in the field date_clture
thank you for your help
I've never done a trigger before
Hello,I am writing a stored procedure that will take data from severaldifferent tables and will combine the data into a single table for ourdata warehouse. It is mostly pretty straightforward stuff, but there isone issue that I am not sure how to handle.The resulting table has a column that is an ugly concatenation fromseveral columns in the source. I didn't design this and I can't huntdown and kill the person who did, so that option is out. Here is asimplified version of what I'm trying to do:CREATE TABLE Source (grp_id INT NOT NULL,mbr_id DECIMAL(18, 0) NOT NULL,birth_date DATETIME NULL,gender_code CHAR(1) NOT NULL,ssn CHAR(9) NOT NULL )GOALTER TABLE SourceADD CONSTRAINT PK_SourcePRIMARY KEY CLUSTERED (grp_id, mbr_id)GOCREATE TABLE Destination (grp_id INT NOT NULL,mbr_id DECIMAL(18, 0) NOT NULL,birth_date DATETIME NULL,gender_code CHAR(1) NOT NULL,member_ssn CHAR(9) NOT NULL,subscriber_ssn CHAR(9) NOT NULL )GOALTER TABLE DestinationADD CONSTRAINT PK_DestinationPRIMARY KEY CLUSTERED (grp_id, mbr_id)GOThe member_ssn is the ssn for the row being imported. Each member alsohas a subscriber (think of it as a parent-child kind of relationship)where the first 9 characters of the mbr_id (as a zero-padded string)match and the last two are "00". For example, given the followingmbr_id values:1234567890012345678901123456789021111111110022222222200They would have the following subscribers:mbr_id subscriber mbr_id12345678900 1234567890012345678901 1234567890012345678902 1234567890011111111100 1111111110022222222200 22222222200So, for the subscriber_ssn I need to find the subscriber using theabove rule and fill in that ssn.I have a couple of ideas on how I might do this, but I'm wondering ifanyone has tackled a similar situation and how you solved it.The current system does an insert with an additional column for thesubscriber mbr_id then it updates the table using that column to joinback to the source. I could also join the source to itself in the firstplace to fill it in without the extra update, but I'm not sure if theextra complexity of the insert statement would offset any gains fromputting it all into one statement. I plan to test that on Monday.Thanks for any ideas that you might have.-Tom.
View 4 Replies View RelatedCan I roll back certain query(insert/update) execution in one page if query (insert/update) in other page execution fails in asp.net.( I am using sqlserver 2000 as back end)
scenario
In a webpage1, I have insert query into master table and Page2 I have insert query to store data in sub table.
I need to rollback the insert command execution for sub table ,if insert command to master table in web page1 is failed. (Query in webpage2 executes first, then only the query in webpage1) Can I use System. Transaction to solve this? Thanks in advance
I have data as below: select ID,code,go,back from tableA
ID code go back
2 C US UK
2 A UK US
1 A US UK
1 Z UK US
1 C UK US
1 A US UK
I only want to pull out whole ID group which code Z exist. I tried as below:
select ID,code,go,back from tableA A
where exists
( select ID,go,back
from tableA B with (nolock)
where A.ID = B.ID
and A.code='Z')
But it only appear:
ID code go back
1 Z UK US
How can I appear with the group as well?
ID code go back
1 A US UK
1 Z UK US
1 C UK US
1 A US UK
Hello all,
I have a branch a data, now i need to search through a database to check whther it is exist in that database or not, any syggestion?
Example:
Now i have data 123, 234, 345. Let say data 123 and 234 is exist in that database, but data 345 is not exist in that database.
What SQL am i suitable to use to get those result exist(123, 234) and those result not exist (345)?
The database structure is someting like this:
ID NAME O_NAME
-- ----- --------
1 120 123
2 234 234
3 345 345
1) The data consider 'exist' if it exist in column NAME or column O_NAME (either one).
2) The data consider 'not exist' if it not exist in neither NAME column nor O_NAME column
After the SQL query, someting is expected:
Exist:
ID NAME O_NAME
-- ----- --------
1 120 123
2 234 234
Not Exist:
ID NAME O_NAME
-- ----- --------
3 345 345
I'll appreciate if anyone can provide me a solution..Thanks!
I'm inserting from TempAccrual to VacationAccrual . It works nicely, however if I run this script again it will insert the same values again in VacationAccrual. How do I block that? IF there is a small change in one of the column in TempAccrual then allow insert. Here is my query
INSERT INTO vacationaccrual
(empno,
accrued_vacation,
accrued_sick_effective_date,
accrued_sick,
import_date)
[Code] ....
Hi,
Can anyone explain what the difference is and the advantages or disadvantages of using the below statements in my SQL paramaters please. Is there a performance hit if I use the second option?
If myCustomer.Phone2 IsNot Nothing Then
versus
If myCustomer.Phone2.Length > 0 Then
Thanks
Is there an easy way with DTS to pump data from one table to another so that it will update the row if it exists (the source and destination have the same value for the ID colum) or insert it if it doesn't.
I know this can be done with stored procedures/sql by doing IF EXISTS UPDATE ELSE INSERT but there are many tables and columns and this will be very tiime consuming.
I have a page where the user can update stock records. it has 5 x 5 text boxes. If the user has already entered stock before that stock will show up and they can change it and clicking the button it will update, however if they have just entered new data i would assume they would need to insert it, so how do i go about doing this? do i need to use both insert and update in the same sql string?
View 7 Replies View Related