I have a stored procedure that does several steps.
During the stored proc, error messages are produced when certain conditions warrant. But I want to continue anyway....
ex. in a loop in the proc...
SET @strSQL = 'Update Table1 SET col1 = ''' + @strVariable + ''''
EXEC (@strSQL)
--ERROR created by the exec statement.....
When I schedule this as a job, the first error message makes the job fail.
How can I force the proc to run completely, even if an error occurs?
Is there a way to make a SP ignore an error?e.g. I'm looping through each database on a server, checking of a tableexists then selecting a value from that table. Now I have a database putonto the server where the table exists but all column names aredifferent, my SP is not interested in this database so when it errorswith invalid column name I want it to move onto the next databse and notdisplay any error message.
That works until it hits a date formatted incorrectly. The date could have blank spaces, double zeros or an invalid month/day/year (e.g. 033986). The command stops with a conversion error and no values are written to the CorrectedDate fields.
Is there a way to have the command skip the invalid dates and continue to write the datetime conversion for the dates that are formatted correctly?
Edit: Forgot to mention this is on SQL Server 2005 (not Express).
When configuring error output, I want everything that is good in the row to make it to the destination, and then the offending column that is causing an error to be set to NULL, and then sent to the destination as well. In addition, I want to take the offending column's data, and route it over to an error holding table. I know about the ability to redirect the whole row, but I just sort of want to redirect just that column. For example....
Have a table with 5 columns
col1 int null,
col2 int null,
col3 char(3) null,
col4 bit null,
col5 int null
My data flow loads data from a flat file and has a record that looks like this
1 5 ABC R 3
I want the row to make it to the destination as follows....
1 5 ABC NULL 3
Then the offending data needs to go over to my error table
The following error has started appearing consistently this week (50-100) times a day. No code has been changed in the database and I ran a trace to identify the procs executed in the time before this error.There is not any errors with the procs and the procs are running correctly. Does anyone know what is causing this and the remedy for this?
Thank You
Michael
DESCRIPTION: Error: 16955, Severity: 16, State: 2 Could not create an acceptable cursor.
Hello, I have many dts packages scheduled as jobs . job always fails when executed. It runs fine if i execute the dts package. the follwing is the error message Error: -2147217887 (80040E21); Provider Error: 0 (0) Error string: Errors occurred Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 DTSRun OnFinish: DTSStep_DTSExecuteSQLTask_1 DTSRun: Package execution complete. Process Exit Code 1. The step failed. any help would be welcome thenk you
I have a scheduled job contain 2 steps. Step 1 is execute DTS Packageusing CmdExec 'DTSRun', step 2 using TSQL to execute just simple query.This job execute recurely every day, every 6 hours.The problem is, sometimes this job was successfull, but sometimesfailed with error as below :........Process Exit Code -1073741819. The step failed.Please help me, what the cause of the error?Any help would be greatly appreciated.
Quick question - What are the different ways of executing SSIS Package besides Scheduled Job?Does SSIS support command line execution (DTSRUN command supported in 2005)?
The reason I asked was that Scheduled Job triggered SSIS always error out. But when I call the same SSIS in Visual Studio, it executes beautifully. I wonder if there's some reason behind the error when calling from Scheduled Job.
Getting this message when running a dtsrun step in a scheduled job;
DTSRun: Loading... DTSRun: Executing... Error: -2147220499 (800403ED); Provider Error: 0 (0) Error string: No Steps have been defined for the transformation Package. Error source: Microsoft Data Transformation Services (DTS) Package Help file: sqldts.hlp Help context: 700. Process Exit Code 1. The step failed.
This just started today.. These jobs have been running for months with no problems.
I have a package that has its source as an Oracle DB on another server. This package will feed data from that source to a SQL Server 2005 DB. So far, the package works fine if it is executed manually even in SQL Mgmt Studio. It's only failed when I tried it as a scheduled job. I guess I need to do "Package Configurations" which includes the UserID and password for accessing Oracle DB ... but I don't know how. Please help.
Regards,
dnncpt
----------------------------------
Here is the error message:
Date,Source,Severity,Step ID,Server,Job Name,Step Name,Notifications,Message,Duration,Sql Severity,Sql Message ID,Operator Emailed,Operator Net sent,Operator Paged,Retries Attempted 05/08/2007 09:49:00,DataFeed,Error,0,<MyDBServer>,DataFeed,(Job outcome),,The job failed. The Job was invoked by Schedule 8 (Schedule DataFeed Grant Tables). The last step to run was step 1 (DataFeed Grant Tables).,00:00:02,0,0,,,,0 05/08/2007 09:49:00,DataFeed,Error,1,<MyDBServer>,DataFeed,DataFeed Grant Tables,,Executed as user: <MyDBServer>SYSTEM. ....3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 9:49:00 AM Error: 2007-05-08 09:49:00.81 Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "DTSassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2007-05-08 09:49:01.86 Code: 0xC0202009 Source: AWARDS Connection manager "SourceConnectionOLEDB" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "OraOLEDB" Hresult: 0x80004005 Description: "ORA-01005: null password given; logon denied". End Error Error: 2007-05-08 09:49:01.86 Code: 0xC020801C Source: Feed data t... The package execution fa... The step failed.,00:00:02,0,0,,,,0
When i checked the machine this morning i saw that MS DTC service was stopped and when did start it, it was good for a sec or two then it stopped auto matically i was not sure waht was goin on...
Then i checked the Eventviewer, it said the log file is full i tried out to find ms dtc log reset or increase the size but could not find out..where can i find this.
One more thing what is the purpose of DTC, i know in sql 6.5 we have everything in enterprize manager but i can't see the same either in 7.0 or 2000 is the name changed or is it linked to some other source.
Like linked server , does this depend on MS DTC..how and what is the basic purpose of this..kindly tell me what i should do now...
Is there a way I can perform an update on a table, but ignore thetrigger (or disable the trigger) each time I run a particular updatescript from a DTS package?I would like subsequent DTS steps to use the trigger except for my lastupdate statement. Is this possible?Thanks,Frank*** Sent via Developersdex http://www.developersdex.com ***
In my stored procedure I'm calling a buggy and flaky stored procedurethat comes from a third party. When I run my stored proceure from QA,I'm getting a whole buch of errors raised inside the third party one.Is there any way I could just ignore them, so that if I run my SP fromQA, only errors from my code, if any, show up?TIA
Hi,I'm trying to upload a large number of log entries currently stored astext files into a database table using bcp. For a few rows I get a"right truncation" error and the offending rows are not uploaded to thetable.I don't want to increase the size of the table varchar fields becauseit's only about a dozen out of almost million rows that have thisproblem ... I want to provide an override - i.e. if a row will resultin truncated data, truncate but still bulk copy the offending row. Isthat possible?I couldn't find such an option in the documentation.Any help is greatly appreciated.Thanks,Mudassir Latif
I'm writing a store procedure to accept search strings from user on my site. Currently, this is what I have.
Code Snippet @schoolID int = NULL, @scholarship varchar(250) = NULL, @major varchar(250) = NULL, @requirement varchar(250) = NULL --@debug bit = 0 AS BEGIN -- SET NOCOUNT ON added to prevent extra result sets from -- interfering with SELECT statements. SET NOCOUNT ON; SELECT * FROM [scholarship] WHERE ([sectionID] = @schoolID OR @schoolID IS NULL) AND ([schlrPrefix] LIKE '%' + @scholarship + '%' OR [schlrName] LIKE '%' + @scholarship + '%' OR [schlrSufix] LIKE '%' + @scholarship + '%' OR @scholarship IS NULL ) AND ([Specification] LIKE '%' + @major + '%' OR @major IS NULL ) AND ([reqr1] LIKE '%' + @requirement + '%' OR [reqr2] LIKE '%' + @requirement + '%' OR [reqr3] LIKE '%' + @requirement + '%' OR [reqr4] LIKE '%' + @requirement + '%' OR [reqr5] LIKE '%' + @requirement + '%' OR @requirement IS NULL )
The problem is, somtimes the search doesn't work if there is a space behind or infront of the search string. I wonder if there is away to ignore any spaces and go right into whatever character comes next or after. If so, how do I implement that?
Hi! I'm wondering if there is a way to have the AVG() not to include the zero amount as part of the calculation. I'm looking the field, PurchPrice and RepairCost that are used by the AVG() function...
I am importing data into a SQL table and there is a potential for duplicate records to be coming in. How do I simply ignore the duplicates and add only the records that do not violate the keys?
SELECT expense_id, CAST(expense_id AS char(10)) + ' - ' + CAST(trip_km AS char(5))+ ' - ' + CAST(expense_amount AS char(5)) + ' - ' + charge_centre AS ExpenseDesc
If charge center is null, I need to ignore this field. How can I achieve this? The reason is that if any of the field is null, it will return ExpenseDesc as null.
if there is an error in the trigger then the update to the table does not happen. is there a way to make sql ignore errors in a trigger and still update the table
Hi, I am trying to import data from a Text file into a database Table using SQLserver BCP utility. I am able to do that when I have all new records in my Text file. But I am getting primary key violation error when I am trying to import the record which is already existing in the table. This is correct, but I want my program to ignore these errors and import only those records which are fine. I tried [-m maxerrors] option, but it is not working. My BCP program is getting interrupted at the first error itself, even if I give [-m100] option. my command looks something like this, bcp pub..employee in C:data.txt -b1 -m100 -c -t, -Sdatabase -Uuser -Ppassword
here -b1 is, processing 1 row per batch transaction -m100 is, ignoring first 100 errors
I am looking for best practice when passing a parameter to stored procedure that is not needed. For example, sometime the users will want the list to list only by certain state. Other times the user want all states. How can I make the SP to ignore the where clause if users want all states.
CREATE PROCEDURE usp_Example @State nvarchar(2) AS SELECT FirstName, LastName, State FROM SomeTable WHERE State = @FirstName; GO
Using SQL2000. According to Books Online, the avg aggregrate functionignores null values. ((3+3+3+3+Null)/5) predictably returns Null. Isthere a function to ignore the Null entry, adjust the divisor, andreturn a value of 3? For example:((3+3+3+3)/4) after ignoring Nullentry.If there's more than one null value, then adjust divisor accordingly.For example: ((5+5+5+4+Null+5+5+Null)/8) would be ((5+5+5+4+5+5)/6)after nulls ignored.Thanks for any help or advice.
Hi,I believe my SQL server was configured as Case sensitivity. I have anumber of stored procedures which were moved from a non-Casesensitivity SQL server. Because of the Case sensitivity, I have to doa lot of editing in those stored procedures. Is there a quick way toavoid the editing?Something like ignoring the case in one statement?Thanks in advance, your advice will be greatly appreciated.
I'm using Microsoft SQL Server Management Studio. I've created a view (very basic two field select with a inner join) -- I expect the query to take some time as there are about 1.7 million records in one table and about 3 million in the join table. Problem is, I always get a timeout error when I try to run the query.
I've checked the server settings and "Execution time-out" = 0 (no time-out). Checked this at the server and in Microsoft SQL Server Management Studio. So my question is why am I getting a time-out when I have it set to not time-out?
I connect, but when I try to access any table from this database I get an error indicating that the object doesn't exist and if I use the fullname xx.table I get no errors. What may be happening?
I want to bulkcopy a pipe delimited text file that has two header records to SQL Server using ADO / C#. The first record contains the datetime the file was recreated and the second record contains the column definitions, both records start with a # character (see below).
# May 15, 2008 12:12:12345 # col1|col2|col3 col1rec1data|col2rec1data|col3rec1data col1rec2data|col2rec2data|col3rec2data
Is there a way to ignore the two header records when building the select statement for the text file or in the schema.ini?
