Implicit Cast Is Forbidden

Apr 24, 2006

Hi,
I have noticed that implicit casts are allowed according to the actual data in a column.
Here is an example:

SELECT * FROM MyTable WHERE MyColumn = 3897

MyColumn is defined as nvarchar(15) not null in the database schema.

This query will work only if there are no record in MyTable for which MyColumn has an alphanumerical value. Otherwise it will raise an error:

Serveur : Msg 245, Niveau 16, État 1, Ligne 1
Syntax error converting the nvarchar value 'C061' to a column of data type int.

Of course, the following query is always successful:

SELECT * FROM MyTable WHERE MyColumn = '3897'


Am I correct?


Thanks a lot.

View 3 Replies


ADVERTISEMENT

RS 403: Forbidden Error

Apr 30, 2008

I have had Reporting Services installed on my servers since SQL05 came out everything has worked fine. Recently we have had to implement €œRequire Client Certificates€? in IIS. This breaks Reporting services. When I try to access with https://fullyQulifiedServerName/reports/pages/folder.aspx. I get a 403: Forbidden Error. Note that if I change the setting in IIS for the ReportServer node only from €œRequire Client Certificates€? to €œAccept Client Certificates€?. RS works again. The requirement is to "Require Client Certificates". Does any one have a fix for this.

The Server has winsvr2003
RS is configure like this

Report Manager Virtual Directory
Name Reports
Website = Default

Report Server Virtual Directory
Name = ReportServer
Website = Default
Require SSL Connections = Checked
For all Soap API€™s (level 3)
Certificate Name = FullyQulifiedServerName

<UrlRoot>https://FullyQulifiedServerName/reportserver</UrlRoot

View 1 Replies View Related

Forbidden Access To ReportServer (error 403)

Jul 23, 2005

Hi,I am gradually tearing my hair out and other bits of my anatomy tryongto get web access to my reportserver.Currently I can access the rportmanager via a web interface andconfigure user access etc etc, at which point the fun begins.When I try to browse to the URLhttp://domain/reportserver?/reachUmobile/Users I get a 403 error,so.....I check the permissions on the directory and the web directories andadd what I think are the user accounts needed to access these resourcesbut unfortunately I am at a position where I have added EVERY useraccount with FULL control to both the directories AND the reportmanager via the web browser.I cant possibly add any more user/permissions and I have been trying tofind the problem for a day now and getting rather "angry"..Anyway, apologies if there is not enough info here but if any of youguys know of any good resources that are available (I have triedbooks/web etc) then I would be grateful for any pointers to debugging,logs etc (I have checked the usual logs and nothing!)Short of uninstalling the report server I have tried everything, and Idont really want to go that route as the previous developer didn;tleave me the report project (.NET). bugger....Anyway really appreciate some help on this..Many thanksRichardplace in the url create and update the settings for all my datasourcesvia the reportmanager.2.

View 2 Replies View Related

Query Could Not Be Processed. Access Is Forbidden

Jul 20, 2005

I am using http to access my cube (MS Analysis Server) and there are userswho are getting "Query could not be processed. Access is forbidden"intermittently. Can someone help out and let me know what is causing thisissue? Some users are not getting this error.

View 3 Replies View Related

Row Count Error: Component Forbidden...

Jun 28, 2007

I have a Data Flow Task with an OLE DB Source containing this query:



SELECT Batch_Idx, Package, FailureSource
FROM Audit.ProcessPackage
WHERE (Status = 2) AND (Batch_Idx > ?) and FailureSource IS NOT NULL



At this point, before sending the data to the Recordset Destination, I would like to do a Row Count, and do something different depending on if there are any rows or not. When I try to put in the Row Count after the OLE DB Source, I get this error:



"The component has forbidden the requested use of the input column with lineage id xxx"



My variable for the RowCount results is RowCount and it is declared at package level. I have tried to use all each of the columns as input columns, and I get the error for every one. Do you know how I can fix this error? Thank you!



View 5 Replies View Related

Access Forbidden: Too Many Users Are Connected

Oct 22, 2007

I have a web application that runs on IIS on Windows XP professional. I have reached the max number of connections to the IIS website. So, I tried the approach of disabling HTTP Keep-Alives.


All is fine and dandy until my Business Intelligence Studio report project attempts to set the parameters for a report using report viewer at which point I get the following error message:


"The request failed with http status 401: access denied."


How can I fix this? I have posted this over at the asp.net forums, but I figured I would check here to see if anyone else has solved this problem.

View 1 Replies View Related

The Remote Server Returned An Error: (403) Forbidden

Apr 30, 2008

I wish http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1865928&SiteID=1 had the resolution to my issue but it doesn't.

Long story short, I thought I'd build a local web service with the same signature as something another team was doing. In Visual Studio, you can click on the project and select Publish.

One of the options is to "Delete all existing files prior to publish." I was unfamilar with this option and it does exactly what it claims to do: my inetpubwwwroot folder is clean as a whistle. I was expecting it to only delete what it had put out there but apparently not.

We have a deploy process here so the web work and the reports I've developed can and have been dropped back out there, no harm done. I recreated the virtuals for Reports and ReportServer and something is amiss. I can navigate to http://localhost/Reports/ and it's fine, it displays the folders I had created. I can click into the folders and see the reports I had deployed just fine. However, when I actually click on a report, it starts to serve the content but then chokes and dies on rendering. It then indicates "The remote server returned an error: (403) Forbidden."

I have gone through a fellow developer's machine and compared the IIS settings between the two machines and they appear to be the same.

Auth is set to Integrated Windows
I have restarted iis (iisreset) as well as followed up with a bounce to the "SQL Server Reporting Services (MSSQLSERVER)" service
It's all using the 2.0.507270.0 engine


Event log has this

Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 4/30/2008 4:10:43 PM
Event time (UTC): 4/30/2008 9:10:43 PM
Event ID: a375e274ef444acb997111f67f5fb9b4
Event sequence: 24
Event occurrence: 1
Event detail code: 0

Application information:
Application domain: /LM/W3SVC/1/Root/Reports-1-128540632573857817
Trust level: RosettaMgr
Application Virtual Path: /Reports
Application Path: C:Program FilesMicrosoft SQL ServerMSSQL.2Reporting ServicesReportManager
Machine name: 1-227630691

Process information:
Process ID: 4884
Process name: aspnet_wp.exe
Account name: 1-227630691ASPNET

Exception information:
Exception type: WebException
Exception message: The remote server returned an error: (403) Forbidden.

Request information:
Request URL: http://localhost/Reports/Reserved.ReportViewerWebControl.axd?OpType=StyleSheet&Version=2005.090.3042.00
Request path: /Reports/Reserved.ReportViewerWebControl.axd
User host address: 127.0.0.1
User: SomeDomainSomeUser
Is authenticated: True
Authentication Type: Negotiate
Thread account name: 1-227630691ASPNET

Thread information:
Thread ID: 1
Thread account name: 1-227630691ASPNET
Is impersonating: True
Stack trace: at Microsoft.Reporting.WebForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
at Microsoft.Reporting.WebForms.ServerReport.GetStyleSheet(String styleSheetName)
at Microsoft.Reporting.WebForms.ReportServerStyleSheetOperation.PerformOperation(NameValueCollection urlQuery, HttpResponse response)
at Microsoft.Reporting.WebForms.HttpHandler.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)


Any help would be appreciated immensely.

View 3 Replies View Related

SQLCLR-Patterns&&amp;Practices/Object Builder Error: Operation That Was Forbidden By The CLR Host

Feb 6, 2007

Hi,

Using the Microsoft Patterns and Practices "Object Builder" (Dependency Injection/Builder library), I wrote an SQL CLR Stored Procedure (using VS 2005 Professional).

All compiles and deploys ok (to SQL Server 2005 Express).

However, at run-time, I get the following error upon a "BuilderContext" object's instantiation: {"Attempted to perform an operation that was forbidden by the CLR host."}

Thoughts on how to get ObjectBuilder working in the SQLCLR?

Thanks!

Andy



(posted below is the sample code...with the run-time exception occuring on the ...BuilderContext cxt = new ... call)




Microsoft.Practices.ObjectBuilder.BuilderStrategyChain chain =
new Microsoft.Practices.ObjectBuilder.BuilderStrategyChain();

chain.Add(new Microsoft.Practices.ObjectBuilder.CreationStrategy());

Microsoft.Practices.ObjectBuilder.Locator locator1 =
new Microsoft.Practices.ObjectBuilder.Locator(null);

// Get error when new'ing BuilderContext: "Attempted to perform an operation that was forbidden by the CLR host."
Microsoft.Practices.ObjectBuilder.BuilderContext cxt =
new Microsoft.Practices.ObjectBuilder.BuilderContext(chain, locator1, null);

View 1 Replies View Related

Implicit Keep Together For Export?

Jul 20, 2005

I have a report that has 3 nested lists.  The report looks fine when I view it in the browser but when I print it or export it to another format it appears that keep together is on for each list because some pages are only partially filled.  I do not have keep together turned on for any report control, and I don't have page break turned on for anything.  This problem results in the report being many more pages than it needs to be.  Can anyone help?

View 4 Replies View Related

Implicit Transaction Count

May 12, 2004

Hello, everyone:

I need total transaction count. @@TRANCOUNT returens the number of explicit transaction. How about implicit transaction? Thanks a lot.

ZYT

View 1 Replies View Related

Implicit Vs Explicit Joins

May 20, 2008

performance wise what is the difference between following queries

Select * from A, B Where A.ID = B.ID
Select * from A INNER JOIN B ON A.ID = B.ID
(ID is the primary key)

View 6 Replies View Related

Implicit Cashing In SSRS

Jan 23, 2008

Hi Everyone-
i have a report that include parameters that the user set and press the button ViewReport for rendering the report
until that everything ok,.. .......but assume that there is an updating occurred on data after the user make the first press on the button ViewReport.

The problem is if the user press the button ViewReport again for the second time without changing the parameter value the report result will be the same even though it is the old data that appear in the 1st press button.


can anyone tell me how to handle this problem to make it refresh when the ViewReport button is pressed
or if there is no solution can anyone provide me with a link that talks about that problem for more details

thanx
Maylo

View 7 Replies View Related

Disable Implicit Casting

Oct 10, 2006

Is there a way do disable/disallow implicit casting in Sql Server 2000?

Say for example:

if ' ' = 0 select getdate()


This wil print out the current date and time.

But ' ' (a string, varchar, whatever) is not the same type as 0 (say, int). Implicit casting is nice, but is there also an off switch?

View 2 Replies View Related

Implicit Casting And UNPIVOT

Jun 29, 2007

Hi all,



I am running into a problem which seems to indicate SQL Server 2005 is pretty aggressive with its implicit conversion which makes UNPIVOT apparently unusable for my current task of creating attribute/value pairs of strings for each of the records unpivoted around the primary key.



WITH cte as

(

SELECT 1 as Code, '2' as Status, 'Some Guy' as CreatedBy, Convert(varchar(19), getdate(), 120) as CreatedDate

)

SELECT

[Code]

,[Attribute]

,[Value]

FROM

cte

UNPIVOT([Attribute] FOR [Value] IN ([Status],[CreatedBy],[CreatedDate])) as U;



Msg 8167, Level 16, State 1, Line 1

The type of column "CreatedBy" conflicts with the type of other columns specified in the UNPIVOT list.



The same result shows up if I use an inner SELECT instead of the CTE:



SELECT

[Code]

,[Attribute]

,[Value]

FROM

(

SELECT 1 as Code, '2' as Status, 'Some Guy' as CreatedBy, Convert(varchar(19), getdate(), 120) as CreatedDate

) cte

UNPIVOT([Attribute] FOR [Value] IN ([Status],[CreatedBy],[CreatedDate])) as U;



It seems to me that some arbitrary decision about what column is processed first is made and the process fails as soon as a column is met which is not of the same datatype. I also think it is interesting that the engine will implicitly cast from varchar to DateTime but not the other way around.



Any thoughts on how I can get around this?



Thanks in advance,

Calvin

View 1 Replies View Related

Implicit Transaction For A Page Request?

Nov 19, 2003

If I execute multiple SqlCommands in a single .aspx, using a single SqlConnection, are all the commands part of the same transaction?

That is, if I say:
cmd1.CommandText = "UPDATE foo SET myVal = myVal - 1"
cmd2.CommandText = "SELECT myVal FROM foo"

cmd1.Connection = myConn
cmd2.Connection = myConn

myConn.Open()

cmd1.ExecuteNonQuery() ' decrement myVal
intResult = CInt(cmd2.ExecuteScalar()) ' select value of myVal

myConn.Close()

Do the UPDATE and the SELECT happen in the same transaction, or is it possible that someone else would have changed the value of myVal between these two calls?

View 7 Replies View Related

Implicit Conversion In Query Analyzer

Dec 8, 2004

I am trying to construct a query in Query Analyzer (with SQL Server 2000), but am getting an error regarding "implicit conversion."

Here is the query:

SELECT dbo.AUCTION.EbayNum, dbo.AUCTION.EndDate,
DATENAME([month], dbo.AUCTION.EndDate) + ' ' + DATENAME([year], dbo.AUCTION.EndDate) AS [PmtMonth],
dbo.LOT.Description, dbo.AUCTION.WinBid,
PaidStat = CASE dbo.AUCTION.PaidStatus
WHEN 0 THEN ''
ELSE 'PAID'
END,
PaidAmt = CASE dbo.AUCTION.PaidStatus
WHEN 0 THEN ''
ELSE dbo.AUCTION.WinBid
END
FROM dbo.AUCTION INNER JOIN
dbo.LOT ON dbo.AUCTION.LotNum = dbo.LOT.LotNum
WHERE (LEN(dbo.AUCTION.Winner) > 0)


The error occurs in the PaidAmt CASE statment:
"Implicit conversion from data type varchar to money is not allowed. Use the CONVERT function to run this query."

Why is there an implicit conversion going on? And how can I fix it? :mad:

View 2 Replies View Related

Implicit Conversion Of Data Type

Oct 3, 2006

Dear all,

Hi, I'm using this code to export record from sql to excel and i got this error message "Implicit conversion from data type text to nvarchar is not allowed. use the convert function to run this query"

Excel file is already created columns in the view and excel file are the same and cell format of the excel is converted to text.

--- code used
insert into OPENROWSET('Microsoft.Jet.OLEDB.4.0',
'Excel 8.0;Database=c:filename.xls;',
'SELECT * FROM [filename$]') select * from ViewName

thanks,

View 6 Replies View Related

Difference Between Explicit Inner Join And Implicit

Mar 31, 2008

Is there any difference between explicit inner join and implicitinner joinExample of an explicit inner join:SELECT *FROM employeeINNER JOIN departmentON employee.DepartmentID = department.DepartmentIDExample of an implicit inner join:SELECT *FROM employee, departmentWHERE employee.DepartmentID = department.DepartmentID

View 11 Replies View Related

Problem With Implicit Conversion In Sql Server

Nov 16, 2007



I have a sql statement that must run in both sql server and oracle. I can't change the sql statement as it is created as part of a core application from Rational Rose.

Basically the problem is that I have a table with a column defined as a decimal type in sql server (numeric in oracle).

The select statement, however, treats the column as a char. I can reproduce the problem with this simple code:


create table atest2 (a decimal(9,0))

insert into atest2 values (1)

insert into atest2 values (2)

insert into atest2 values (null)

insert into atest2 values (4)

select * from atest2 where a = ' '

This gives the error:

Error converting data type varchar to numeric.



The documents seem to indicate the sql server will implicitly convert decimals to varchar but this doesn't seem to be happening. Is there an environment setting that might control this?

Thanks,
Rut

View 2 Replies View Related

Problem With Implicit Conversion In Sql Server

Nov 16, 2007

have a sql statement that must run in both sql server and oracle. I can't change the sql statement as it is created as part of a core application from Rational Rose.

Basically the problem is that I have a table with a column defined as a decimal type in sql server (numeric in oracle).

The select statement, however, treats the column as a char. I can reproduce the problem with this simple code:


create table atest2 (a decimal(9,0))

insert into atest2 values (1)

insert into atest2 values (2)

insert into atest2 values (null)

insert into atest2 values (4)

select * from atest2 where a = ' '

This gives the error:

Error converting data type varchar to numeric.



The documents seem to indicate the sql server will implicitly convert decimals to varchar but this doesn't seem to be happening. Is there an environment setting that might control this?

Thanks,
Rut

View 3 Replies View Related

Server Error - Disallowed Implicit Conversion ...

Aug 10, 2006

Hi:
I get this following error when I run try to insert a record from the DetailsView. Please help me out.  
---------------------------------------------------------------------------------------------------------------------
Disallowed implicit conversion from data type sql_variant to data type uniqueidentifier, table 'getsetwin.lax21.tblCreateGoal2', column 'ApplicationId'. Use the CONVERT function to run this query.Disallowed implicit conversion from data type sql_variant to data type uniqueidentifier, table 'getsetwin.lax21.tblCreateGoal2', column 'UserId'. Use the CONVERT function to run this query.Operand type clash: sql_variant is incompatible with image
---------------------------------------------------------------------------------------------------------------------
Thank you & Best regards,
Lax

View 26 Replies View Related

Implicit Conversion Error - Adding Different Varchars Together

Aug 27, 2005

Hi I get the following error:

Implicit conversion of varchar value to varchar cannot be done
because the collation of the value is unresoved due to a collation
conflict


SELECT
    Accounts_Users.NameFirst + ' '
+ Accounts_Users.NameLast + ' (' + Accounts_Users.BusinessUnit + ')' AS
NameFull,  -- Error here
--    Accounts_Users.NameFirst + ' ' + Accounts_Users.NameLast AS NameFull,  -- This line works
    Accounts_Users.EmailAddress, Accounts_Users.BusinessUnit
    FROM Accounts_Users.Accounts_Users


NameFirst and NameLast are VarChar(30) and BusinessUnit VarChar(50), I
did try converting it to 30 also but still got the same error

The sp works on my dev sql server but not on the live one, I am using Management Console v2 (dev) and 1.2 (live server)

Thanks

Steve

View 2 Replies View Related

Confused About Implicit Data Conversion Error

Jan 14, 2004

Good Afternoon

Hope that somone can shed some light...

I am using the HitSoftware driver to pass data to an AS400 from a SQL 7 database. Data makes it fine to 2 of the 4 tables but I cannot get the syntax correct to even get out of the S/P edtitor in SQL for the other 2.

I have fields in the SQL S/P defined as VARCHAR. The target fields on the AS400 are ALPHA. So I figured the insert statement to look like:

INSERT INTO CALICOTOTESTAS400.S105Z1NM.ORDTALIB.itmrva0# (TRID30, ITNO30, ITDS30, ITYP30, INVF30, UMST30, ITAC30, UUCA30, EGNO30, RTID30)
VALUES (@v_action, @v_modelNumber, @v_modelDesc, '1', 1, 'EA', @v_acctClass, @v_modelyear, @v_engRevision, @v_spectype)

However, when I try to close the S/P window I get the error:

Error 257: Implicit conversion from data type varchar to binary is not allowed. Use the CONVERT function to run this query.

So, I changed the insert statement to this:

INSERT INTO CALICOTOTESTAS400.S105Z1NM.ORDTALIB.itmrva0# (TRID30, ITNO30, ITDS30, ITYP30, INVF30, UMST30, ITAC30, UUCA30, EGNO30, RTID30)
VALUES (CONVERT(binary, @v_action), CONVERT(binary, @v_modelNumber), CONVERT(binary, @v_modelDesc), CONVERT(binary, '1'), 1, CONVERT(binary, 'EA'), CONVERT(binary, @v_acctClass), CONVERT(binary, @v_modelyear), CONVERT(binary, @v_engRevision), CONVERT(binary,
@v_spectype))

Now the S/P closes without the error. But when I send it to the AS400 I get unrecognizable characters in the fields.

Then I started thinking...I am not trying to do anything with binary fields.
So I am really lost. Please help.

Thanks,
Ed 330-273-7521

View 6 Replies View Related

Do Foreign Keys Generate Implicit Indexes?

Sep 21, 2007

If i create a simple table with a foreign key constraint, does itcreate an implicit index on that given ID? I've been told this isdone in some databases, but i need to know for sure if SQL Server doesit. Has anyone heard of this before, on any other databses perhaps?Heres an example of how the foreign key constraint is being added:ALTER TABLE [dbo].[administrators] WITH CHECK ADD CONSTRAINT[FPSLUFSUOXZGAJOJ] FOREIGN KEY([AdministratorRoleID])REFERENCES [dbo].[administratorroles] ([AdministratorRoleID])My initial testing seems to indicate adding an index on the foreignkey column helps, but i need to know for sure. Any insight would begreatly appreciated!Bob

View 6 Replies View Related

Implicit Transaction Mode In SQL Server 2000

May 17, 2007

Hi all:



I know i can use the sentence SET IMPLICIT_TRANSACTIONS ON in a Stored Procedure to force SQL Server to set the connection into implicit transaction mode.



Have i a sentence or configuration to force all SQL Server connections to implicit transaction mode?



Thanks in advance.

View 2 Replies View Related

Implicit Conversion From Data Type Datetime To Int Is Not Allowed.

Apr 25, 2005

Here is the situation...

I am using SQL Server 2000.  I have created a Store Procedure to
insert information, 4 of the fields are date types.  I am using
OleDb Data Provider (System.Data.OleDb) namespace.

The dates are filled by a form (web form) on submit event, I created a
class that has functions to create my OleDb Parameters.  I add the
parameters to the command and execute it through a SQL Server Stored
Procedure.  In the event that I must have coded something wrong, I
tested in the SQL Query Analyzer and the IN parameters for the date I
used the getDate() method.  This is where I know it is OleDb and
SQL Server Parameters.

What Converstion Format should I use in the SP for the date? 
OleDb.date are doubles from some date in 1979 or something or
another.  So I used an OleDbDataType.DBDate.  It seems that
when the Stored Procedure uses the IN Parameters dates provided by
OleDbDataType.Date or DBDate, that it doesn't like the int
format.  I am guessing that I am not converting the date in the
parameters in the Insert of the Store Procedure... this is basically
what I have...

Function to add parameters and execute SP

private int _startdate = DateTime.Now;
private int _finishdate = DateTime.Now.AddDays(30);

OleDbParameter[] myParams = {
ParamBuilder("@StarDate", OleDbType.DBDate, 8, _startdate),
ParamBuilder("@FinishDate", OleDbType.DBDate, 8, _finishdate)
};

ExecuteNonQuery("myInsert", myParams);

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

CREATE PROCEDURE myInsert
@StartDate datetime, @FinishDate datetime AS

INSERT INTO myTable (STARTDATE, FINISHDATE)
VALUES (Convert(datetime, @StartDate), Convert(datetime, @FinishDate))

Please keep in mind that I am using System.Data.OleDb
namespace.....  please don't tell me to use SQLClient, it seems
since I've been so adaptive of using OleDb, that it sould work just as
well.  I am way too far into this to change my Provider to SQL
Client, but I promise myself that the next project (if using SQL
Server, I will be using SQLClient and I will keep using OleDb for
Oracle.) *sigh*

Help!

View 1 Replies View Related

SQL Server 2012 :: Implicit Conversion Comparing INT Column To 0?

Sep 15, 2015

In a stored procedure, the following code is causing a huge read and CPU load when it really shouldn't. The @IDParameter below is coming in as a parameter to the proc.

Here's the snippet of code where the problem is coming in:

DECLARE @ID INT;
SET @ID = (SELECT ID From OtherTable WHERE FKID = @IDParameter);
SELECT COUNT(*)
FROM LargeTable

WHERE MostlyZeroID = @ID AND MostlyZeroID > 0Most (90+%) of the MostlyZeroID rows are 0 (hence the name) but regardless of distribution this should evaluate with minimal work on SQL Server's part to 0. However, when this was run, it is using a ton of CPU and doing a ton of Reads as it seeks through the entire index. When I look at the execution plan, I see under the seek predicate a Scalar Operator(CONVERT_IMPLICIT(int,[@1],0)) which is what is destroying the performance.

I've confirmed that the MostlyZeroID column in the LargeTable is defined as an INT NOT NULL. I also tested the scenario outside the stored procedure without any variables as the following to make sure it wasn't some kind of strange parameter sniffing scenario:

SELECT COUNT(*)
FROM LargeTable
WHERE MostlyZeroID = 0 AND MostlyZeroID > 0

However, this query also did the implicit conversion. I then tried this out on a temp table populated with a similar number of records (100 million) with a similar distribution and I didn't get the implicit conversion (I got a constant scan as I would've expected) when I did this:

SELECT COUNT(*)
FROM #TestTable
WHERE MostlyZero = 0 AND MostlyZero > 0

I also tried the same on several other tables that are set up similarly (large amount of zeros in an INT column) and I always got a constant scan and didn't do an implicit conversion.

why the query engine is interpreting this 0 as something other than an INT and doing an implicit conversion when getting the count in the scenario above? What can be done to protect against it? In the above scenario, an IF @ID > 0 statement was placed before the code including the count since there was no reason to even run the code if the @ID was equal to zero.

View 9 Replies View Related

Implicit Conversion Of Datatype Text To Nvarchar Is Not Allowed.

Jul 20, 2005

I am facing a problem while using SQL Server with VB application.Implicit conversion from datatype text to nvarchar is not allowed.Use the convert function to run this query.When i see the trace file, i see one stored procedure called but nolines of code get executed, and immediately after that the ROLLBACKTRANSACTION occurs and the applications fails.But to my surprise i am able to do the same thing on a differentmachine using the same application and the same database on the sameserver with the same user id.Can anyone explain the reason of occurance of this problem.I require this very urgently, so i will be oblized if anyone can comeup with a quick response.Kind Regards,Amit Kumar

View 5 Replies View Related

CREATE ASSEMBLY ERROR -- An Implicit Reference Of Some Kind ???

Jun 28, 2006

When I run this ...

CREATE ASSEMBLY asmRANDRTCalendaringGateway FROM 'E:sqlRANDRTCalendaringGateway.dll' WITH PERMISSION_SET = UNSAFE

I get this error ...

Msg 10301, Level 16, State 1, Line 1
Assembly 'RANDRTCalendaringGateway' references assembly 'system.web, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a.', which is not present in the current database. SQL Server attempted to locate and automatically load the referenced assembly from the same location where referring assembly came from, but that operation has failed (reason: 2(The system cannot find the file specified.)). Please load the referenced assembly into the current database and retry your request.

Even though I do not explicity refer to system.web in the DLL's code ...

using Microsoft.Win32;
using System;
using System.Data.Sql;
using System.Data.SqlClient;
using System.Collections.Generic;
using System.Configuration;
using System.Text;
using log4net;
using ADODB;
using MAPI;
using CDO;
using System.Runtime.InteropServices;

Is the problem just staring me in the face ?

cheers

View 14 Replies View Related

An Attempt Was Made To Access A Socket In A Way Forbidden By Its Access Permissions.

Jan 6, 2008

Re: Possible Vista-only security issue opening a TCP connection to SQL2005


Please help. I have a problem that appears to be rare. I'm testing the culmination of a year's work and the error I'm getting is at the most basic level (the SQL connection) while everything else so far is working as coded.

My client is Windows Vista, apparently no firewall (I say apparently as in recent years MS have put more and more facades over the actuality of the operating systems), my server is Windows 2003 Server b3790 SP2 with SQL 2005 Standard 1399.06, again no firewall.

PortQuery 2.0 reckons that the server is listening on port 1433, too, so it doesn't seem like a firewall issue.

Nothing reported in either Event Viewers.

Here's the stack dump:

Unhandled Exception: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to
SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider:
TCP Provider, error: 0 - An attempt was made to access a socket in a way forbidden by its access permissions.)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)
at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Robot.Data.Support.ExecuteStoredProcReader(String connectionString, String procName, IDictionary`2 parameters) in P:Visual Studio 2005ProjectsRobotRobot.DataSupport.cs:line 44
at Robot.Data.Analytics.FetchableCollection.ExecuteByIYLT(String criterion) in P:Visual Studio 2005ProjectsRobotRobot.Data.AnalyticsFetchableCollection.cs:line 78
at Robot.Data.Analytics.FetchableCollection.Robot.Core.Interfaces.IFetchable.Fetch(String criterion) in P:Visual Studio 2005ProjectsRobotRobot.Data.AnalyticsFetchableCollection.cs:line 49
at Robot.Data.Analytics.FetchableCollection.Fetch(String criterion) in P:Visual Studio 2005ProjectsRobotRobot.Data.AnalyticsFetchableCollection.cs:line 41
at Robot.Data.Analytics.AnalyticsDalc.Prefetch(String criterion, AnalysisTypeEnum analysisType) in P:Visual Studio 2005ProjectsRobotRobot.Data.AnalyticsAnalyticsDalc.cs:line 167
at Robot.Data.Analytics.AnalyticsDalc.FillRankedCollection(RankedCollection& emptyRc) in P:Visual Studio 2005ProjectsRobotRobot.Data.AnalyticsAnalyticsDalc.cs:line 115
at TestHarness.Program.Main(String[] args) in P:Visual Studio 2005ProjectsRobotTestHarnessProgram.cs:line 35


And here's the connection string, which is built using the SqlConnectionStringBuilder:

"Data Source=192.168.2.2;
Initial Catalog=Research;
Integrated Security=False;
Persist Security Info=False;
User ID=usr_research_dalc_www02;
Password=usr_research_dalc_www02;
Pooling=True;
MultipleActiveResultSets=True;
Network Library=dbmssocn;
Application Name="Analytics Data Access Layer""

I have tried an old project which used to connect to the same server using a more basic connection string (it was a project which populated my Research db with fake data) and it also fails. When I ran this project successfully I'm pretty sure it was on an XP client.

I have also ran my TestHarness .exe on another client (WinXP) and it appears to pass this point and raises an exception that I believe is caused at a later point - so it looks like a Vista client issue.

Thanks in advance for your help,

Luke

P.S. Some losely related thoughts; the MSDN forum system still logs me out on Vista when I try to submit a thread, please sort this out! You can't expect your customers to run around deleting cookies. Also, when will you finally deprecate the default Named Pipes!? And finally, having that "does not allow remote connections" error spewed out with all connection errors is a really bad design choice, in my opinion.

View 4 Replies View Related

SQL 2012 :: Implicit Conversion From Data Type Datetime To Int Not Allowed

Mar 18, 2014

I have code below not working in SQL 2012

declare @d1, @d2, @d3 datetime
...where @d1 between (@d2-15) and (@d3 + 15)

Error:

Implicit conversion from data type datetime to int is not allowed. Use the CONVERT function to run this query...

View 2 Replies View Related

SQL Server 2014 :: Transaction Isolation Level And Implicit Transactions

Oct 23, 2015

I'm investigating a poorly performing procedure that I have never seen before. The procedure sets the transaction isolation level, and I suspect it might be doing so incorrectly, but I can't be sure. I'm pasting a bastardized version of the proc below, with all the names changed and the SQL mucked up enough to get through the corporate web filters.

The transaction isolation level is set, but there is no explicit transaction. Am I right that there are two implicit transactions in this procedure and each of them uses snapshot isolation?

SET NOCOUNT ON;
SET TRANSACTION ISOLATION LEVEL SNAPSHOT;
DECLARE @l_some_type varchar(20),
@some_type_code varchar(3),
@error int,
@error_msg varchar(50);

[Code] .....

View 4 Replies View Related

Implicit Conversion Of Char Value To Varchar Cannot Be Performed Because The Collation Of The Value Is Unresolved..

Nov 12, 2007

I got this erorr when trying to create my stored proc,

What do i need to fix, and how do i fix it?!!

Msg 457, Level 16, State 1, Procedure PROC_DAILY_ACTIVITY, Line 13

Implicit conversion of char value to varchar cannot be performed because the collation of the value is unresolved due to a collation conflict.




Code Block
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go

-- =============================================
-- Author: <Zaccheus,Tenchy>
-- Create date: <NOVEMEBER,12,2007>
-- Description: <Reporting stored procedure,DAILY ACTIVITY,>
-- =============================================
CREATE PROCEDURE [dbo].[PROC_DAILY_ACTIVITY]
(@Region_Key int=null)
AS
BEGIN
SELECT
Region_Key,
Null as Customer_Code,
Non_Customer_Activities.Question_code,
Non_Customer_Activities.Description,
Region AS Region,
Name AS Territory_Name,
Non_Customer_Activities.Que_Desc AS Store_Name,
Non_Customer_Activities.Logged_Time AS TheDate,
Non_Customer_Activities.response AS Response,
Null as is_Visit_Fg
FROM [FSSRC].[dbo].Qry_Sales_Group Sales_Group
INNER JOIN
(Select QH.[question_code]
,Question_Header.Description
,CONVERT(datetime,DATEADD(day, (qh.cycle_day-1), p.start_date),6) Logged_Time
,SUBSTRING([entity_code],1,5) SR_Code
,[response]
,Territory_Code SR_Territory_Code
,'Not Customer Related' Que_Desc
From question_history QH
INNER JOIN Period P
ON p.period_code = qh.period_code
INNER JOIN [RC_DWDB_INSTANCE_1].[dbo].[Tbl_Territory_In_Sales_Responsible] as Territory_In_Sales_Responsible
ON Territory_In_Sales_Responsible.SalesPerson_Purchaser_Code=SUBSTRING([entity_code],1,5) COLLATE Latin1_General_CI_AS
INNER JOIN dbo.questions Question_Header
ON Question_Header.question_code = QH.question_code
WHERE [entity_code] like '%.USER%'
AND Question_Header.Question_Code IN('AME01','ASE01','ACO01','ALU01','AOS01','APH01','ATR01','ATE01','ACR06','ACR05','ACR02','ACR03','ACR08','ACR07')
AND CONVERT(datetime,DATEADD(day, (qh.cycle_day-1), p.start_date),6) = '11/9/2007'
) Non_Customer_Activities
ON Sales_Group.Code = Non_Customer_Activities.SR_Territory_Code
UNION ALL
SELECT
Customer_Activities.Customer_Code,
NULL,
NULL,
Region AS Region,
Name AS Territory_Name,
Customer_Activities.Customer_Name AS Store_Name,
Customer_Activities.Logged_Time AS TheDate,
NULL AS Response,
is_Visit_Fg
FROM [FSSRC].[dbo].Qry_Sales_Group Sales_Group
INNER JOIN
(Select distinct time_log Logged_Time
,[entity_code] Customer_Code
,[name] Customer_Name
,Territory_Code Cust_Territory_Code
,MAX(is_Visit_Fg) Is_Visit_Fg
From question_history QH
INNER JOIN Period P
ON p.period_code = qh.period_code
INNER JOIN dbo.questions Question_Header
ON Question_Header.question_code = QH.question_code
INNER JOIN [FSSRC].[dbo].[customer]
ON Entity_Code = [customer_code]
INNER JOIN [FSSRC].[dbo].[visit] V
ON V.[customer_code] = QH.[entity_code]
AND V.[period_code] = QH.[period_code]
AND V.[cycle_day] = QH.[cycle_day]
INNER JOIN [RC_DWDB_INSTANCE_1].[dbo].[Tbl_Territory_In_Sales_Responsible] as Territory_In_Sales_Responsible
ON Territory_In_Sales_Responsible.SalesPerson_Purchaser_Code=[sales_person_code] COLLATE Latin1_General_CI_AS
WHERE [entity_code] NOT like '%.USER%'
AND Convert(datetime,convert(Varchar,time_log,110)) = '11/9/2007'

GROUP BY
time_log
,[entity_code]
,[name]
,Territory_Code
) Customer_Activities
ON Sales_Group.Code = Customer_Activities.Cust_Territory_Code
WHERE @Region_Key=Region_Key
order by 4
END

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved