I'm trying to export data from a SQL Server 2005 database to a DB2 database through SSIS. However, I keep getting an error that says "Could not retrieve table list" with Invalid Conversion. SQLSTATE=07006. Does anybody have any ideas or what the problem could be?
-Kyle
A view named "Viw_Labour_Cost_By_Service_Order_No" has been created and can be run successfully on the server.
I want to import the data which draws from the view to a table using SQL Server Import and Export Wizard.
However, when I run the wizard on the server, it gives me the following error message and stop on the step Setting Source Connection
Operation stopped...
- Initializing Data Flow Task (Success)
- Initializing Connections (Success)
- Setting SQL Command (Success)
- Setting Source Connection (Error)
Messages
Error 0xc020801c: Source - Viw_Labour_Cost_By_Service_Order_No [1]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "SourceConnectionOLEDB" failed with error code 0xC0014019. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
(SQL Server Import and Export Wizard)
Exception from HRESULT: 0xC020801C (Microsoft.SqlServer.DTSPipelineWrap)
- Setting Destination Connection (Stopped)
- Validating (Stopped)
- Prepare for Execute (Stopped)
- Pre-execute (Stopped)
- Executing (Stopped)
- Copying to [NAV_CSG].[dbo].[Report_Labour_Cost_By_Service_Order_No] (Stopped)
- Post-execute (Stopped)
Does anyone encounter this problem before and know what is happening?
Thanks for kindly reply.
Best regards,
Calvin Lam
I am trying to simplify a query given to me by one of my collegues written using the query designer of Access. Looking at the query there seem to be some syntax differences, so to see if this was the case I thought I would import the database to my SQL Server Developer edition.
I tried to start the wizard from within SQL Server Management Studio Express as shown in one of the articles on MSDN which did not work, but the manual method also suggested did work.
Trouble is that it gets most of the way through the import until it spews forth the following error messages:
- Prepare for Execute (Error)
Messages
Error 0xc0202009: {332B4EB1-AF51-4FFF-A3C9-3AEE594FCB11}: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Could not start session. Too many sessions already active.".
(SQL Server Import and Export Wizard)
Error 0xc020801c: Data Flow Task: The AcquireConnection method call to the connection manager "SourceConnectionOLEDB" failed with error code 0xC0202009.
(SQL Server Import and Export Wizard)
Error 0xc004701a: Data Flow Task: component "Source 33 - ATable" (2065) failed the pre-execute phase and returned error code 0xC020801C.
(SQL Server Import and Export Wizard).
There does not seem to be any method of specifying a number of sessions, so I don't see how to get round the problem.
Does anyone know how I can get the import to work?
Can anyone tell me how I can use the DTS Wizard to import over 100 excel files from my hard drive, over to my server called(MARKETING_DB)and loop back through to grab the next excel file until all the files have been imported?
Thanks,
Mark
Hi guys
I'm trying to export a table from one ms sql database to another ms sql database. Unfortunately the following error occurs:
Error at Destination for Row number 2400. Errors encountered so far in this task: 1
Can somebody help me to solve this problem? Would be very nice!!
Best regards,
Lorenz
Hi,
I'm using the DTS Import/Export Wizard for the first time. Does anyone have a "canned" script I can run instead of going through the step by step wizard process. I have a number of tables I have to copy from a prod to test environment.
Thanks,
Jeff
What happens if my DTS fails half way through? (For example due to a network error).
I guess what I'm really asking is: does DTS Wizard operate within a transaction which upon failure is rolled back, and on success is committed?
Thanks,
Richard.
Import Export Wizard creates a new SSIS package to the file system. With the help of that wizard can I add the data flow task to an existing package.
Thanks
Sai
Hello,
I am having alot of problems with the import export wizard. I am trying to copy over around 315 tables to a new database. When the tables are copied over to the new database they are copied without any of the original constraints. Does anyone know why this could be happening? What I am trying to accomplish is a simple database transfer with the exception of about 10 to 15 tables from the original database. I do not understand why this is such a problem. I did not create a package, as this is going to be a one time shot.
Any help would be appreciated.
Thanks,
David
In sql2k i can select bunch of tables in EM and export to a different db also I can schedule this activity.
How to do the same in SQL2K5?
I have Sql Server 2005 Developer Edition and Sql Server Management Studio.I'm trying to import data but there are no options available under "Projects" in SSMS.Do I need to download an update or anything to use this functionality?
Thanks
SQL Server 7.0 has an Import/Export Wizard for insert/outputs to delimitefd files.
I was wondering if someone could point me to an undelying SP or fuction which is being run and if it can be modified/customised, or any other alternative within SQL-Server.
TIA,
Mustafa
I have read your articles and I got one question about the SQL Server Import and Export Wizard in MS SQL 2005.
It seems that in some cases, the Wizard do not copy ID’s even if I select the “Enable identity insert”
One of these cases is when I have already run a script to create the database schema before I start the wizard.
If I don’t run a script to create database schema before I start the wizard, then I will not get the keys transferred to the new database.
Do you know why this can happen and if this is meant to be a feature in the MS SQL 2005 or is Microsoft using another way to copy databases with identities and keys in this version?
Hi everyone,
Plese help me out. I import one database from one server to another. This process able to copy all the tables and functions but it copied only few stored procedures.
so tell me how to copy or import remaining stored procedures?
Can any one say,what is DTS Package?
DTS Export/Import wizard --What it does??
Help me!
I'm trying to export data from a SQL Server 2005 database to a DB2 database through SSIS. However, I keep getting an error that says "Could not retrieve table list" with Invalid Conversion. SQLSTATE=07006. Does anybody have any ideas or what the problem could be? The replies so far that I have gotten have been...
-Kyle
-------------------------------
Where exactly do you get this error?
Thanks,
Bob
--------------------------------
I am getting the error on the SELECT source tables and views screen.
-Kyle
--------------------------------
What type of provider are you using for your sql sql server connection manager?
Does a 'test connection' succeed?
--------------------------------
It loks like fetching of table metadata does not work for your provider. Is there a way you could try to see that metadata in some other tool after setting the same connection parameters (DSV wizard in BIDS perhaps). Try to double-check your schema related connection settings.
HTH,
Bob
--------------------------------
The test connection does succeed. The provider I am using is the IBM OLE DB Provider for DB2
--------------------------------
Can you try using MS OLE DB for DB2 to see if you get the same error? Also, is there a blob column in the source/destination table? If there is, try to move the data without the blob column and see if you get this error.
-------------------------------- (Does anybody know what this is? I can't seem to find the MS OLE DB for DB2)
There are no blobs
Hi all,
we have recently purchased a server with sql 2005. One of the things we are looking to do is pull our entire informix database over onto the sql box. I have tried using the import/export wizard however when it comes to the copying I the option to copy all tables is greyed out. I have been able to do this sql to sql but not when i select the source as odbc and destination as sql.
I need to try and resolve this quite quickly and any advice/help would be appreciated. Please bear in mind that im relatively new to this stuff. I have had a look at other posts, and am getting the impression that this cannot be done simply. My initial understanding was that this could be done using the DTS in sql 2000 quite simply, but was also told that it should be even easier in 2005..
Well appreciate any help
Ian
I'm using SQL Server 2005 Workgroup edition for the first time and I'm having trouble with the Import Wizard between my Access Database source and the SQL Server Management Studio. I get through the Import Wizard successfully saying the rows were added to [database].dbo.[table]. At the final screen I'm given a Close button but never asked to "save" the import. Whenever I exit the wizard and return back to the object browser in the Management Studio my imported tables are nowhere to be found. What am I doing wrong?
View 5 Replies View RelatedI installed Sql Server Express with Advanced Services. Created a new database. When I right click the DB, and select Tasks, there is no Import/Export on the task list. The drop down Tools menu has only three items, External Tools ....., Customize ..., and Options ... (I have the client Sql Server Enterprise Manager on this machine to connect to Sql Server 2000 on another server.)
View 3 Replies View RelatedI am attempting to import data from an access db using the wizard and I get the following error when the wizard attempts to save.
- Initializing Data Flow Task (Success)
- Initializing Connections (Success)
- Setting SQL Command (Success)
- Setting Source Connection (Success)
- Setting Destination Connection (Success)
- Validating (Success)
- Saving (Error)
Messages
* Error 0xc0208220: Data Flow Task: Unable to save to XML.
(SQL Server Import and Export Wizard)
Does anyone have any ideas about how to correct this?
I have imported spreadsheet and text files into SQL 2000 and I have never had this much trouble. Everything is just fine when I have a table that is all varchar(50). I have a table that has money, datetime, etc. Everytime I try to import this information it says that it cannot import because the column will be truncated. The column that first errors out is completely blank. The table column allows nulls. What is the issue? It is a money column and there isn't anything in there. Next the error message says that it is a datetime field ever after it has already run bast 5 datetime fields without a problem. The format is exactly the same. Is there a patch for this or am I doing something completely wrong? PLEASE HELP!
View 8 Replies View RelatedGood Afternoon,
I am currently having some issues with using the Import/Export Wizard to import (copy) data into SQL Server. Then, I need to import tables (data) from an Access Database. When I am trying to go through the "SQL Server Import and Export Wizard" I get an "Operation stopped..." message (it also says click the Back button to change the settings). I have a lot of actions that have not been successful, this would include the following:
Prepare to Execute- Stopped
Pre-execute- Stopped
Executing- Error
This is the message under "Executing": (Error 0xc002f210: Preparation SQL Task: Execuing the...)
Copying to [Donor].[dbo].[Donor]- Stopped
Copying to [Donor].[dbo].[Fund]- Stopped
Copying to [Donor].[dbo].[Pledge]- Stopped
Post-execute- Stopped
Cleanup- Stopped
I would appreciate any advice or help in this matter. Thank you for your time!
Please let me know if there are any questions.
Where do I install the necessary files to get the import/export wizard to show up in sql express management studio? I have tried installing the SP1 Toolkit, the advanced services etc but I cannot get it so that I can right click on a database and 'import data' or 'export data' Thanks!
View 2 Replies View RelatedHi,
I have two environements:
1) Development (Full access to SQl Server 2005)
2) Hosting SQL Server 2005, ONLY accees to the database MYDatabase, NO access to master
I would like to copy a table from my development to hosting. I would like to have an exact replica of the table in hosting. I DO NOT want to copy the whole database, just a table. I was able to do this without problems in SQL 2000/Enetrprise Manager.
I have tried to copy the table using the new import/export data wizard. I did enabled Identity Insert option. There are few problems:
1) The drop table and recreate option (under Mappings) is disabled, I can not check it. IS THIS a BUG? I have latest SP 3 aplplied
2) When I just run it I get the following errors. Also the problem is that it runs in trunsaction, I was hoping it would skip the duplicate records and just copy the ones I need. Seems it is all or nothing, very common problem in Windows based systems (same problem in Explorer when copying files)
3) I was hoping that such a simple task as mirroring a table would be easly achieved, please help
Messages
Information 0x402090df: Data Flow Task: The final commit for the data insertion has started.(SQL Server Import and Export Wizard)
Error 0xc0202009: Data Flow Task: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "The statement has been terminated.".An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Violation of PRIMARY KEY constraint 'PK_classifieds_HotelRoomTypes'. Cannot insert duplicate key in object 'dbo.classifieds_HotelRoomTypes'.".(SQL Server Import and Export Wizard)
Information 0x402090e0: Data Flow Task: The final commit for the data insertion has ended.(SQL Server Import and Export Wizard)
Error 0xc0047022: Data Flow Task: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - classifieds_HotelRoomTypes" (37) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.(SQL Server Import and Export Wizard)
Error 0xc0047021: Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0202009. There may be error messages posted before this with more information on why the thread has exited.(SQL Server Import and Export Wizard)
Hi, all!The Criminal DB is going strong (as of today: 50 Tables, on 3077Filegroups)Right now I stuffed in it about 2 million records (About 7% of total),but I'm constantly having an issue with dates.What is the CORRECT format to use when importing a DateTime Field???Thank you!!!Piero
View 2 Replies View RelatedHello Folks,
This is my first real exposure to using SSIS's Import Export Tool.
I am trying to create a package to move the data from a number of tables in SQL Server into a duplicate database in Oracle. I am invoking the Import/Export WIzard from within the Management Studio. I am using the SQL Server native client on the SQL Server side and the Microsoft OLE DB driver for Oracle for the Oracle database. Both of my tables have unicode data types. On the SQL Server side I have columns defined as NVARCHAR and on Oracle the same column is defined as NVARCHAR2.
When I initially select the table for export the wizard assumes that I want to create a new table. The new table has the correct column name, column order and data types (NVARCHAR2). I cannot tell it to append the data. If I add the table owner to the detination table name or use the GUI to pick it with the table owner...the data types for the NVARCHAR2 columns go away. I cannot edit the data types at this point and if I continue, SSIS barks at me that it doesn't know the data types of those columns. The problem also occurs if you use the wizard from inside of the BIDS. It seems to be OK with the data type unless the table pre-exists. This seems un-useful to me.
Is there a way to avoid this in the Import/Export Wizard? Am I doing something wrong?
Any help would be appreciated.
Thanks, Mark
Hi all,
Does any one can help me in finding SQL server express Import and Export wizard. I just installed sqlserver express, I went to tasks, right click and import/export is not there. How can I see it or loaded. Easy instruction please, I'm very new
Thanks
Hi! I have XP sp2, with SQL server 2005 Developer Edition 9.00.3054.00 and also have Microsoft SQL Server Express Edition 9.00.3042.00, well my problem alway I want import data into any server from any data source I recive this message:
TITLE: SQL Server Import and Export Wizard
------------------------------
The operation could not be completed.
------------------------------
ADDITIONAL INFORMATION:
Could not load file or assembly 'System.EnterpriseServices.Wrapper.dll' or one of its dependencies. The system cannot find the file specified. (System.EnterpriseServices)
------------------------------
Could not load file or assembly 'System.EnterpriseServices.Wrapper.dll' or one of its dependencies. The system cannot find the file specified.
------------------------------
The system cannot find the file specified. (Exception from HRESULT: 0x80070002)
------------------------------
BUTTONS:
OK
------------------------------
I have this name space but, I try for many ways and I can't import data in my server, What can I do???
Thanks a lot.
I am trying to import data from SAP through SQL SERVER Import & Export Wizard.... but its throughing following Error:
Copying to [LATPRO].[dbo].[RESB] (Error)
I went through couple of sites, as well as SQL help file and as asked increased my virtual memory still i am getting same error, does anyone know anything regarding aforesaid problem??
MessagesInformation 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Information 0x4004800c: Data Flow Task: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
(SQL Server Import and Export Wizard)
Error 0xc02090f5: Data Flow Task: The component "Source - Query" (1) was unable to process the data.
(SQL Server Import and Export Wizard)
Error 0xc0047038: Data Flow Task: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Source - Query" (1) returned error code 0xC02090F5. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Error 0xc0047021: Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
(SQL Server Import and Export Wizard)
Error 0xc0047039: Data Flow Task: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
(SQL Server Import and Export Wizard)
Error 0xc0047021: Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
(SQL Server Import and Export Wizard)
Hi
I am trying to import SAP R/3 Data to MS SQL 2005 with SQL Server Import and Export Wizard (.net framework Data Provider for mySAP Business Suite. )
for ie i have to import data from mara table.
System Number of the R3 environemnt 00
but i am getting error at the time i am making connect from MS SQL 2005 to SAP R/3 ...
Following is the error
The operation could not be completed
Additional information
--> Missing SYSNR = ... in connect_param in RFcOpenEx(Microsoft.Adapter.SAP.SAPProvider)
|--> Missing SYSNR = ... in connect_param in RFCOpenEx ( GInvoker)
Can any one explain me where i am going wrong?
Hi All,
I have become frustrated and I am not finding the answers I expect.
Here's the gist, we support both Oracle and SQL for our product and we would like to migrate our Clients who are willing/requesting to go from Oracle to SQL. Seems easy enough.
So, I create a Database in SQL 2005, right click and select "Import Data", Source is Microsoft OLE DB Provider for Oracle and I setup my connection. so far so good.
I create my Destination for SQL Native Client to the Database that I plan on importing into. Still good
Next, I select "Copy data from one or more tables or views". I move on to the next screen and select all of the Objects from a Schema. These are Tables that only relate to our application or in other words, nothing Oracle System wise.
When I get to the end it progresses to about 20% and then throws this error about 300 or so times:
Could not connect source component.
Warning 0x80202066: Source - AM_ALERTS [1]: Cannot retrieve the column code page info from the OLE DB provider. If the component supports the "DefaultCodePage" property, the code page from that property will be used. Change the value of the property if the current string code page values are incorrect. If the component does not support the property, the code page from the component's locale ID will be used.
So, I'm thinking "Alright, we can search on this error and I'm sure there's an easy fix." I do some checking and indeed find out that there is a property setting called "AlwaysUseDefaultCodePage" in the OLEDB Data Source Properties. Great! I go back and look at the connection in the Import and .... there's nothing with that property!
Back to the drawing board. I Create a new SSIS package and figure out quickly that the AlwaysUseDefaultCodePage is in there. I can transfter information from the Oracle Source Table to the SQL Server 2005 Destination Table, but it appears to be a one to one thing. Programming this, if I get it to work at all, will take me about 150 hours or so.
This make perfect sense if all you are doing is copying a few columns or maybe one or two objects, but I am talking about 600 + objects with upwards of 2 million rows of data in each!!
This generates 2 questions:
1. If the Import Data Wizard cannot handle this operation on the fly, then why can't the AlwaysUseDefaultCodePage property be shown as part of the connection
2. How do I create and SSIS Package that will copy all of the data from Oracle to SQL Server? The source tables have been created and have the same Schema and Object Names as the Source. I don't want to create a Data Flow Task 600 times.
Help!!!
I used Import/Export wizard to migrate database from one SQL Server 2005 to another SQL Server 2005.
But the tool doesn't import the stuffs like constraints, Auto numbers key, stored procedure and functions.
Can someone help?
Thanks
Hi
I'm experiencing problems copying a SQL 2000 database from my host to a local SQL Server.
I choose the Data Source OK, using SQL Server Authentication and the username and password used to setup my hosted database.
Then I specify the destination, my local server. I'm using my sa account and password and creating a <new> database (doesn't matter if I use the same db name as the source or a different one, I'm still getting an error).
I then choose "Copy objects and data between SQL Server databases", then take all defaults on the "Select Objects to Copy screen", i.e. create destination objects drop objects first and include dependent objects); creat data (replacing existing data); Copy all objects and use default options.
The copy appears to be creating a script OK (runs up to 100%), then looks to start copying objects. It gets to approx 20% and reports that it "Failed to copy objects from Microsoft SQL Server to Microsoft SQL Server". When I click on the Executing Package entry it tells me:
[Microsoft][ODBC SQL Server Driver][SQL Server]The login already has an account under a different user name.
I can't seem to find any reference to this error in my books or on Google (usually a great source of info). Can't help feeling I'm doing something stupid. Would be very, very greatful if someone out there could give me a pointer in the right direction.
Thanks,
Keith.