I'm trying to copy data with time stamp from one server to another, but I'm keep getting the following error.
Error 0xc0202048: Data Flow Task: Attempting insertion into the row version column "TimeStamp". Cannot insert into a row version column.
(SQL Server Import and Export Wizard)
Is there anyway I can deselect the timestamp field when I run the wizard?
How can I successfully transfer the data?
Thanks
A view named "Viw_Labour_Cost_By_Service_Order_No" has been created and can be run successfully on the server. I want to import the data which draws from the view to a table using SQL Server Import and Export Wizard. However, when I run the wizard on the server, it gives me the following error message and stop on the step Setting Source Connection
Operation stopped...
- Initializing Data Flow Task (Success)
- Initializing Connections (Success)
- Setting SQL Command (Success) - Setting Source Connection (Error) Messages Error 0xc020801c: Source - Viw_Labour_Cost_By_Service_Order_No [1]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "SourceConnectionOLEDB" failed with error code 0xC0014019. There may be error messages posted before this with more information on why the AcquireConnection method call failed. (SQL Server Import and Export Wizard)
Exception from HRESULT: 0xC020801C (Microsoft.SqlServer.DTSPipelineWrap)
- Setting Destination Connection (Stopped)
- Validating (Stopped)
- Prepare for Execute (Stopped)
- Pre-execute (Stopped)
- Executing (Stopped)
- Copying to [NAV_CSG].[dbo].[Report_Labour_Cost_By_Service_Order_No] (Stopped)
- Post-execute (Stopped)
Does anyone encounter this problem before and know what is happening?
I am trying to import an xlsx spreadsheet into a sql 2008 r2 database using the SSMS Import Wizard. When pointed to the spreadsheet ("choose a data source")  the Import Wizard returns this error:
"The operation could not be completed" The Microsoft ACE.OLEDB.12.0 provider is not registered on the local machine (System.Data)
How can I address that issue? (e.g. Where is this provider and how do I install it?)
I am trying to simplify a query given to me by one of my collegues written using the query designer of Access. Looking at the query there seem to be some syntax differences, so to see if this was the case I thought I would import the database to my SQL Server Developer edition.
I tried to start the wizard from within SQL Server Management Studio Express as shown in one of the articles on MSDN which did not work, but the manual method also suggested did work.
Trouble is that it gets most of the way through the import until it spews forth the following error messages:
- Prepare for Execute (Error) Messages Error 0xc0202009: {332B4EB1-AF51-4FFF-A3C9-3AEE594FCB11}: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Could not start session. Too many sessions already active.". (SQL Server Import and Export Wizard)
Error 0xc020801c: Data Flow Task: The AcquireConnection method call to the connection manager "SourceConnectionOLEDB" failed with error code 0xC0202009. (SQL Server Import and Export Wizard)
Error 0xc004701a: Data Flow Task: component "Source 33 - ATable" (2065) failed the pre-execute phase and returned error code 0xC020801C. (SQL Server Import and Export Wizard).
There does not seem to be any method of specifying a number of sessions, so I don't see how to get round the problem.
Does anyone know how I can get the import to work?
I have become frustrated and I am not finding the answers I expect.
Here's the gist, we support both Oracle and SQL for our product and we would like to migrate our Clients who are willing/requesting to go from Oracle to SQL. Seems easy enough.
So, I create a Database in SQL 2005, right click and select "Import Data", Source is Microsoft OLE DB Provider for Oracle and I setup my connection. so far so good.
I create my Destination for SQL Native Client to the Database that I plan on importing into. Still good
Next, I select "Copy data from one or more tables or views". I move on to the next screen and select all of the Objects from a Schema. These are Tables that only relate to our application or in other words, nothing Oracle System wise.
When I get to the end it progresses to about 20% and then throws this error about 300 or so times:
Could not connect source component. Warning 0x80202066: Source - AM_ALERTS [1]: Cannot retrieve the column code page info from the OLE DB provider. If the component supports the "DefaultCodePage" property, the code page from that property will be used. Change the value of the property if the current string code page values are incorrect. If the component does not support the property, the code page from the component's locale ID will be used.
So, I'm thinking "Alright, we can search on this error and I'm sure there's an easy fix." I do some checking and indeed find out that there is a property setting called "AlwaysUseDefaultCodePage" in the OLEDB Data Source Properties. Great! I go back and look at the connection in the Import and .... there's nothing with that property!
Back to the drawing board. I Create a new SSIS package and figure out quickly that the AlwaysUseDefaultCodePage is in there. I can transfter information from the Oracle Source Table to the SQL Server 2005 Destination Table, but it appears to be a one to one thing. Programming this, if I get it to work at all, will take me about 150 hours or so.
This make perfect sense if all you are doing is copying a few columns or maybe one or two objects, but I am talking about 600 + objects with upwards of 2 million rows of data in each!!
This generates 2 questions: 1. If the Import Data Wizard cannot handle this operation on the fly, then why can't the AlwaysUseDefaultCodePage property be shown as part of the connection 2. How do I create and SSIS Package that will copy all of the data from Oracle to SQL Server? The source tables have been created and have the same Schema and Object Names as the Source. I don't want to create a Data Flow Task 600 times.
when trying to Ãmport files to our database server from a client, I keep getting an error:
- Validating (Error) Messages Error 0xc00470fe: Data Flow Task: The product level is insufficient for component "Source_txt" (1). (SQL Server Import and Export Wizard)
Error 0xc00470fe: Data Flow Task: The product level is insufficient for component "Data Conversion 1" (175). (SQL Server Import and Export Wizard)
... doing the same import when logged on the server, hasn't been giving me any errors, how come. I can from my client without trouble import tables from other DB servers but when ever it is files it won't do it.
I tried as mentioned in other threads rerun setup to re-install SSIS, but as it was already installed it wouldn't re-install. My next move would be to make a clean install, but not sure it would help, as I think this is a buck.
I have one table namely consumer with approx 50 columns.
I have created one same table with audit prefix including 2 more column for action n timestamp fields.
My question is that if user change only 10 column data at a time: i want to add only that particular column data rather to add entire row. Currently I am adding entire row in audit table but now scenario is change to update only updated column data.
I created a SSIS package and creating a derived column named: Date...set datatype as DT_DBDATE....I do not want the timestamp on date...then I want to load this Date into a SQL server database table, with datatype of datetime, but it will load here with the timestamp which I do not want. Any ideas? I did change datatype of the SQL Server Destination datatype to DT_DBDATE but it will change it back to DT_DBTimestamp. thx
Anybody out there who can help me on how to view the whole import process (DTS package created using Import DTS wizard) in SQL codes? Is there a possibility to view the process using Query Analyzer?
I'm trying to import data from Microsoft Access. I already have all the tables in SQL Server and also the relationships, but I can't seem to import any data without deleting the relationships. Is there a way to do this without deleting them?
Can anyone tell me how I can use the DTS Wizard to import over 100 excel files from my hard drive, over to my server called(MARKETING_DB)and loop back through to grab the next excel file until all the files have been imported?
I have a working Data Import from Excel 2013 to SQL Server 2012.But when I save the package to SQL and Execute it, it fails.I think this is due to Datatype issues.In the Wizard I set the Global On Error Action to Ignore when dealing with Excel columns which contain both Numbers and Text. This works fine.So I suspect that when the package is saved and executed it uses the default Global On Error Action - which is fail. Is there a way to change this setting in SSMS or elsewhere?
I'm using the DTS Import/Export Wizard for the first time. Does anyone have a "canned" script I can run instead of going through the step by step wizard process. I have a number of tables I have to copy from a prod to test environment.
Importing DBase files I get to the screen titled "Select Source Tableand Views" And none appear in the list. (I can get the list displayedabout once in ten tries) From that screen anything causes a crash ofthe wizard and Enterprise Manager. This happens on my deveopmentinstallation of Enterprise Manager Version 8.0.Any Ideas/ PleaseJohn Cooper
I am trying to copy updated tables from a DB on a remote SQL server tomy pc using import wizard. I choose "copy objects and data between SQLServer databases". On the screen "Select objects to copy", all of theoptions are unchecked/blank including the script location. Clicking"select objects" causes the wizard (and enterprise manager) to crash.An error message refers to mmc.exe. Any ideas?
I am trying to import some csv files into a table. Some of the values are left blank and are supposed to be interpret as null. However, when I try to use the import wizard (via SQL Server Management Studio), the import process errors out. The fields on the table allows null values.
How do I specify the import wizard to interpret blank fields in flat files to be null? It was mentioned somewhere that there might be a checkbox indicating that I can preserve the null values, but I can't find the option anywhere.
I just installed SQL 2005 and am having trouble with the import wizard. After I select import data I get the following error. I am running SQL on XP. Does anyone have a lead on this error?
=================================== This wizard will close because it encountered the following error: (Microsoft SQL Server) ------------------------------ For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&EvtSrc=Microsoft.SqlServer.Management.UI.WizardFrameworkErrorSR&EvtID=UncaughtException&LinkId=20476 =================================== No description found ------------------------------ Program Location: at Microsoft.SqlServer.Dts.Runtime.Wrapper.ApplicationClass.get_DBProviderInfos() at Microsoft.SqlServer.Dts.DtsWizard.DTSWizard.GetDtsDbProviderInfos(WizardInputs wizardInputs) at Microsoft.SqlServer.Dts.DtsWizard.DataSourceCombo.PopulateProviders(Boolean fSources, WizardInputs wizardInputs) at Microsoft.SqlServer.Dts.DtsWizard.Step1.OnInitializePage(EventArgs e) at Microsoft.SqlServer.Management.UI.WizardPage.RaiseEnterPage() at Microsoft.SqlServer.Management.UI.WizardForm.NextPage(WizardPage nextPage) at Microsoft.SqlServer.Management.UI.WizardForm.Next_Click(Object sender, EventArgs e)
I created my first package using the import wizard and saved it to the server. And now I can't find it. In SQL Server Mgt Studio, I've browsed through every imaginable folder in the target database, in MSDB database, and in the global folders.
I read something that suggested there should be an Integration Services folder, but there isn't.
Once I locate the package, I understand that it's not editable. Can it be transferred to BI Studio for editing? TIA.
Or is someone reading this a Wizard of Wizards. I need a 2nd flavor of import wizard. The one that I would clone out of the existing one would: Use ASCII not UnicodeUse the copy column control not the Data ConversionThe size of all fields will be 255 not 50.The data type will be varchar.In my cloned wizard, the goal will be to just get the data loaded. All other goals will be addressed by the user after the data is in the database.
I select a database then right click and select import data. The import wizard screen shows then I click Next
and get the following error. The wizard will close because it encountered the following error: Additional Information> No description found.
===================================
This wizard will close because it encountered the following error: (Microsoft SQL Server)
------------------------------ For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&EvtSrc=Microsoft.SqlServer.Management.UI.WizardFrameworkErrorSR&EvtID=UncaughtException&LinkId=20476
===================================
No description found
I am at a loss to fix this error. Is there another way to import data without using the wizard?
I am having alot of problems with the import export wizard. I am trying to copy over around 315 tables to a new database. When the tables are copied over to the new database they are copied without any of the original constraints. Does anyone know why this could be happening? What I am trying to accomplish is a simple database transfer with the exception of about 10 to 15 tables from the original database. I do not understand why this is such a problem. I did not create a package, as this is going to be a one time shot.
I have Sql Server 2005 Developer Edition and Sql Server Management Studio.I'm trying to import data but there are no options available under "Projects" in SSMS.Do I need to download an update or anything to use this functionality? Thanks
SQL Server 7.0 has an Import/Export Wizard for insert/outputs to delimitefd files. I was wondering if someone could point me to an undelying SP or fuction which is being run and if it can be modified/customised, or any other alternative within SQL-Server. TIA, Mustafa
I have read your articles and I got one question about the SQL Server Import and Export Wizard in MS SQL 2005.
It seems that in some cases, the Wizard do not copy ID’s even if I select the “Enable identity insert”
One of these cases is when I have already run a script to create the database schema before I start the wizard.
If I don’t run a script to create database schema before I start the wizard, then I will not get the keys transferred to the new database.
Do you know why this can happen and if this is meant to be a feature in the MS SQL 2005 or is Microsoft using another way to copy databases with identities and keys in this version?
Hi everyone, Plese help me out. I import one database from one server to another. This process able to copy all the tables and functions but it copied only few stored procedures.
so tell me how to copy or import remaining stored procedures?
Hello all, I am fairly new to SQL and am running with 2005 Dev. edition. I use the import Wizard often and was wondering if there was a method to save an import "profile" and execute it with out having to key it all in each time?
