Import XML Tables Into SQLExpress
Feb 21, 2008
I am an SQL newbie and despite 3 hours on the Internet this morning I am still confused!
I have some XML tables that I want to import into my SQLExpress database.
I have followed the example at http://support.microsoft.com/kb/316005 How to import XML into SQL Server with the XML Bulk Load component.
I understand the example but when I run the vb code:
Set objBL = CreateObject("SQLXMLBulkLoad.SQLXMLBulkLoad")
objBL.ConnectionString = "provider=SQLOLEDB.1;data source=MySQLServer;database=MyDatabase;uid=MyAccount;pwd=MyPassword"
objBL.ErrorLogFile = "c:error.log"
objBL.Execute "c:customermapping.xml", "c:customers.xml"
Set objBL = Nothing
I get an error message saying that ActiveX cannot create object 'SQLXMLBulkLoad.SQLXMLBulkLoad'.
I have SSMSE and the databse on my PC harddrive.
What am I missing here?
Thanks in antcipation.
Chris
View 5 Replies
ADVERTISEMENT
Jul 23, 2005
Hi all,I've got a PostgreSQL schema, how can I import it in SqlExpress?What's the best tool for administering Sql Express.Thanks,Lorenzo
View 2 Replies
View Related
Apr 20, 2008
Hi Everyone, I have a webform. I need to save the data inside the form into 2 tables. For that i have 2 separate buttons inside the form. tbl_jobPost(JobId,JobName,StartDate,EndDate,phone,email,jobFile_id) tbl_jobFile(FileId,Filename) 1st i ll be inserting the data into the tbl_jobFile:-(FileId,Filename) like this:- (1,abc) (2,xyz) (3, fsd)Then i will be inserting the data into the next table:-tbl_jobPost(JobId,JobName,StartDate,EndDate,phone,email,jobFile_id) like this:- (1,job1,2008,2009,4534535435,zzz@eee.com,jobFile_id)My question:-How should i pass all the jobFile_id from tbl_jobFile into tbl_jobPost row no. 1?Can you suggest any good solution for this?I m new to Foreign key.Do i need to use here.?Thanks.jack.
View 14 Replies
View Related
Mar 13, 2007
I can't start SQLEXPRESS.
The SQL ERRORLOG shows: Error is 3414, Severity 21, State 2 and says: "An error occurred during recovery, preventing the database 'model' (database ID 3) from restarting." Just prior to this, I get a warning: "did not see LP_CKPT_END".
Any thoughts why this might be and how I can fix this?
View 3 Replies
View Related
Sep 21, 2006
hiya,
I have sqlExpress and sqlServerManagementStudio on my XP pro box.
Will the installation of sqlExpress (Advanced Services) cause any problems?IS thereanything that I shold be aware of in advance?
many thanks,
yogi
View 3 Replies
View Related
Jan 19, 2007
Hi All,
I have created an installation application which will install the application with SQL Express and .NET Framework 2.0.
If i install this application in a Fresh system(i.e which is not having SQL Express), it is installing the application with new database instance successfully.
But if i try to install the same in a system which is already having SQL Express, throwing "Object reference exception" because it is not able to create the new database instance.
Can anybody help me out .
Regards,
Doppalapudi.
View 2 Replies
View Related
Mar 21, 2006
Because of numerous problems trying to get sqlexpress working, I uninstalled it with the intention of reinstalling (via Add or Remove Programs). However, now when I try to reinstall it, I get a message that the I am not making a changes so it won't let me install it.
I do have sql server 2005 developer's edition installed; is that the reason? and does that mean I cannot have both installed on the same machine?
View 1 Replies
View Related
Nov 23, 2007
Hi,
Can I give a sequence to each table that I will try to import from one database to another by using import /export wizard
Regards
Vaibhav
View 1 Replies
View Related
Apr 13, 2007
Hi there,
I am having difficulties in importing table from one sql server database file to another sql server database file.
A few months ago, I converted access file to ms sql express file. I had made many changes on the ms sql express file, however, the data in this file isn't the latest as the old system is still being used. Now, I want to deploy my new system, I need to import in necessary tables from the old system database, as well as, I want to retain the tables and data I created on the ms sql express file that I have been using so far for development and testing.
May I know how to import tables from other database? Just as in ms access where we can import tables from other access file. I'm using sql express 2005 and sql server management tool. Any advice/help is very much appreciated.
Thanks....
View 2 Replies
View Related
Nov 6, 2007
Still really new at all this, but learning lots thanks to this forum.
I was wondering - is there a way to import Access tables into my SQL Server 2005 ?
(The Data and the Table Design?)
View 3 Replies
View Related
Apr 24, 2001
I would like to know:
How can I import tables from the Enterprise Manager to Excel (copy and paste)?
Is it possible?
thanks
View 1 Replies
View Related
Sep 7, 2006
I am really new to SQL Server so be patient i guess. I have installed sql server 2005 on my home computer but at first i wasnt able to connect to the server at school where i had started creating tables already. Instead of going up to the school i opted to do it from home and start over. Well I am wondering if there is a way to copy all the tables that i have created on my home computer and just import them into the database on the server at school. Hope this isnt confusing. Anyways, this forum always has helped me in the past, so i am confident someone will be able to point me in the right direction. Thanks in advance.
View 3 Replies
View Related
Mar 29, 2006
i am using sql server express edition.
i need to import (or make copies) on a weekly/daily basis, of several oracle tables into a new adp database.
what is the fastest option? some of these tables hold over 1m records.
so ideally i would like to schedule a refresh or update job outside busy hours.
I have heard of "linked servers" and "dts", but would like some experts advice before starting looking into this.
many thanks
luzippu
View 3 Replies
View Related
Nov 16, 2006
I have some Access tables that I want to import into SQL. I can do this using the AllTasks/ImportData. However if my Access table has a zero length string in a field this is imported into the SQL table as <NULL>. How can I make it import it as a zero length string ?
View 2 Replies
View Related
Apr 2, 2008
Hi, I am trying to import an XML file to SQL tables using SSIS, Data Flow Task --> XML Source --> OLEDB destination.
I have both the XML file and its xsd file.
The extraction of the XML file output 5 tables (mc, r, i, bc and c, have relationship among them). My problem is that one of the tables is empty (table mc). I tried to add a "root" node to the XML file (the xsd file was modified too), and all 5 tables were populated correctly. Is there any other way to fix this problem without manually changing the XML file?
The XML file looks like this:
<mc MajCmd="Atlantic">
<r Region="East">
<i Installation_UIC="M00146" Installation_Name="Cherry Point">
<bc BC="111" BC_Title="Airways">
<c Restoration_Cost_C3="0.0000" Comment_Type="" Override_C_Rating="" Comment="" />
</bc>
</i>
</r>
</mc>
The xsd file looks like this:
<?xml version="1.0" encoding="utf-8"?>
<xschema id="NewDataSet" xmlns="" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urnchemas-microsoft-com:xml-msdata">
<xs:element name="mc">
<xs:complexType>
<xsequence>
<xs:element name="r" minOccurs="0" maxOccurs="unbounded">
<xs:complexType>
<xsequence>
<xs:element name="i" minOccurs="0" maxOccurs="unbounded">
<xs:complexType>
<xsequence>
<xs:element name="bc" minOccurs="0" maxOccurs="unbounded">
<xs:complexType>
<xsequence>
<xs:element name="c" minOccurs="0" maxOccurs="unbounded">
<xs:complexType>
</xs:complexType>
</xs:element>
..........
</xsequence>
<xs:attribute name="BC" type="xstring" />
<xs:attribute name="BC_Title" type="xstring" />
</xs:complexType>
</xs:element>
</xsequence>
<xs:attribute name="Installation_UIC" type="xstring" />
<xs:attribute name="Installation_Name" type="xstring" />
</xs:complexType>
</xs:element>
</xsequence>
<xs:attribute name="Region" type="xstring" />
</xs:complexType>
</xs:element>
</xsequence>
<xs:attribute name="MajCmd" type="xstring" />
</xs:complexType>
</xs:element>
<xs:element name="NewDataSet" msdata:IsDataSet="true" msdata:UseCurrentLocale="true">
<xs:complexType>
<xs:choice minOccurs="0" maxOccurs="unbounded">
<xs:element ref="mc" />
</xs:choice>
</xs:complexType>
</xs:element>
</xschema>
Thanks!
ChaInn
View 2 Replies
View Related
Mar 19, 2006
Is there a way in SQL 2005 Express Edition to import/export data from another MSSQL Server? Something similar to the right click/ import table functionality of MSSQL2000.
I've read similar threads which all recommend using MS Access but there has to be a better way, right?
regards,
dj
View 9 Replies
View Related
Jan 10, 2006
I have problems importing tables from db2 using the import wizard using IBM OLE DB Provider for DB2
The tables and data ('Preview...') can be viewed but when trying to map the columns ('Edit...' next to the tables) or import the data an error is recieved
[DB2/NT] SQL0443N Routine "SYSIBM.SQLCOLUMNS" (specific name "COLUMNS") has returned an error SQLSTATE with diagnostic text "SYSIBM:CLI:-727". SQLSTATE=38553
Schemas is used in both DB2 and Sql 2005
There is no problem importing to Sql 2000
View 1 Replies
View Related
Mar 9, 2007
I'm trying to migrate some tables from 2000 to 2005. I used the wizard in SSIS to create a package bringing them in.
The first database I did this on it worked great, in no time.
However, I tried this on another database and I get a LOT of these:
Information: 0x4004800C at {0417E15E-7306-4DAD-BEDD-1FDB17390EB0}, DTS.Pipeline: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
Now, some things to note:
1. I'm trying to do about 170 tables at once - although none of them are bigger than a MB
2. Copying files between these 2 servers is also taking a long time
Is it too many tables at once? Is it the actual pipeline between the servers? The message above seems to indicate that it is a problem local to the machine, and maybe our file-copying problem is just another issue entirely.
View 3 Replies
View Related
Dec 17, 2006
Hi all,
I've just installed the Sql Server 2005 Express Ed + Management Studio Express and I can't get how to import data from a MS Access 2003 file. From what I've read is not possible to do through the Management Studio Express so is there any other tool to do that?
Thanks in advance,
Marc Soleda
View 7 Replies
View Related
Mar 5, 2007
how do i import or what is the best way of import from xml file to a sql server tables?how do i export or what is the best way of export from sql server tables to xml file?thanks
View 4 Replies
View Related
May 19, 2008
hi
guys i need to import all tables from sqlserver to informix ...............
any idea really appreciated
View 5 Replies
View Related
Nov 7, 2005
Hi all,
I am a newbie to .NET and would appreciate all your valuble
suggestions. I have and issue were I am trying to import data from a
few selected columns MS Access and a couple of columns in SQL
Server Table Y and trying to populate another table X . Both
tables X and Y are in the same Database . I am wondering if I could
design a custom package for this task.
Ananth
View 2 Replies
View Related
Jul 16, 2002
Quick Question!
If you have both invoice header lines and invoice detail lines in a comma delimited file, how can I get the data in the file to be imported into two different tables. I can produce a text file eg:
1,20,10/03/2002,39 High Street Any Town,,
2,20,Fluffy Slippers,2,Red,10.99
2,20,Pyjamas,3,Black,15.99
2,20,Trousers,1,Lilac,24.99
1,21,10/03/2002,11 Gibson Close,
2,21,Sandles,1,Black,12.99
2,21,Shoes,4,Blue,23.99
1,22,13/03/2002,45 Mill Street,
2,22,Womble Feet,4,White,16.99
2,22,Glass Slipper,1,Transparent,23.99
Lines with 1 in the first column should go in the InvoiceHeader table
Lines with 2 in the first column should go in the InvoiceDetails table.
I have tried with DTS but to no avial - ActiveX scrips in the Transform Data Task can only seem to access one data destination - it one table not two.
Any Ideas?
Julia
View 3 Replies
View Related
Nov 14, 2003
Can someone tell me if there's a way to export data from one database to another without losing the primary key information that has been set in the source database?
Please respond to URL. Thanks!
CC
View 1 Replies
View Related
Jan 29, 2014
I have 1 Excel spreadsheet. It has about 50 fields. I need to import this into my Database.The problem is; there are 2 tables that I need to import this into. These 2 tables are related with [ID].So, I need to split the data from 1 spreadsheet between 2 SQL server table. and keep the records related.
View 4 Replies
View Related
Feb 24, 2004
Hi,
I am using DTS in SQL server2k
What is the best way to insert CSV records, where 1 record maps onto multiple tables with parent/child or PK/FK relationship.
eg.
CSV record
(ID, param1, param2, param3)
ParentTable(ID as PK)
Param1Table(ID as FK in ParentTable, param1)
Param2Table(ID as FK in ParentTable, param2)
Param3Table(ID as FK in ParentTable, param3)
Currently i am using multiple Transform Data tasks with ActiveX script. But it seems to work slow.
Thanks and regards,
Henry
View 1 Replies
View Related
Mar 9, 2004
Hi There,
I am trying to create a DTS package that will import dbf tables. My problem is that the data was created back in the pre-dos 5 days, so to save room they took the dates and convert them to 2 characters.
Now I would like to import these tables and conver the date back. I do have a Function that I can run in FoxPro to "Unpack" these dates.
CODE
Function UnPackDate( cDate )
*!*PARAMETERS: f_datestr - Character (manditory). This should be a two
**!* byte string created with PACKDATE().
*!*
*!* RETURNS: A date from 1/1/1970 and 11/29/2126
If EMPTY(cDate)
Return {//}
Endif
Local nDate
nDate = (ASC( LEFT(cDate,1) ) * 256) + ASC( RIGHT(cDate,1))
Return ( CTOD("01/01/1970") + nDate - 8225 )
*================================================= ======================
Does anyone know how to take this function and make it work while doing an import?
Thanks
Sue
View 14 Replies
View Related
Apr 30, 2007
Hi
I have to import some Access 2003 tables into a SQL Server 2005. Since I have to do this every 6 months (different Access db into same SQL-Server) and since I have to check every single row I can't do it with the import data wizzard. I need to import the access tables into "temporary" tables in sql server and from there I'll put the rows into the correct tables...
Does anyone know how to import Access tables into SQL-Server 2005 with C#?
Thank you for your help!
Michael
View 9 Replies
View Related
Nov 28, 2006
Hi,
I want to import into an MDB table a csv file.
I'm trying to use the bulk copy table.
my function is:
SQL = "SELECT * INTO [my_table] FROM [ODBC;Driver=Micrsoft text driver (*.txt; *csv) ;Dbq=c:\;Extensions=asc,csv,tab,txt;].table.csv"
db.OpenEx( "Driver=Microsoft Access Driver .mdb);DBQ=c:\access.mdb;", CDatabase::noOdbcDialog );
db.ExecuteSQL( SQL );
when i run this function i get an error : "You cannot use ODBC to import from, export to, or link an external Microsoft Jet or ISAM database table to your database"
when i try to import in the same way a dbf file (insted the csv file) with VFP it's working well.
what seems to be the problem? how can i fix it? or if some one know how can i import a large csv file into access DB in an efficient diffrent way?
thanks ishay
View 1 Replies
View Related
Feb 4, 2007
I followed the steps outlined in
http://msdn2.microsoft.com/en-us/library/aa337084.aspx
and was successful at importing ".dbf" files from a dBase 7.0 folder.
However, this import was quite slow: approx. 2000 rows per second. Some of the tables I must import have over 8,000,000 rows, which would then take 4,000 seconds, or over one hour. This import rate seems unaffected by whether or not I put a "Copy Column" Data Flow Transformation task between the "OLE DB Source" and "OLE DB Destination" objects.
In SQL Server 2000 it was much faster to import such large tables. The 8 million row table takes only 14 minutes (800 seconds) with SQL Server 2000 -- giving a transfer rate approx. 5 times as fast.
Is there any way to speed up this process in SQL Server 2005? (In SQL Server 2000 there was a "Use fast load" option on the "Options" tab of the "Transform Data Task Properties." I have not yet found any similar option for SQL Server 2005.)
My receiving database is using the "Simple" model, so there is no need to create transaction entries for loading these large tables. There are also no indexes on these tables: the data are being loaded into new tables created in SSIS.
Thanks for your help with this issue.
View 3 Replies
View Related
Jul 1, 2006
Hi All,I've been struggling with this for hours...Could someone please advise me on how to convert my current File based SQL Server Express website to a Server based SQL Express one.Particularly interested in what I need to do in the SQL Express management tool, changes I need to make the projecvt itself and changes needed to get IIS to understand things have been changed.Thanks,Martin.
View 1 Replies
View Related
Jun 20, 2007
hi all ,
i need to import some tables from Infomix database to the sql server 2000.
what is the easiest way to do it as im quite new at this area.
thanks
linda
View 4 Replies
View Related
Jul 20, 2005
I have a report that's created each day as a flat textfile.Because I came from the Access world, I created a macro that importsit with a schema that gives meaningful names to the various columns,and then uses a query to massage some of the data for me (deletes thefirst blank row and does a couple of calculations)Then I use DTS to import the Access query as a table.the textfile has a column called "File_num", and among several others,a column called "Serial_num". (the file numbers represent shipments,and sometimes there are more than one serial number in the shipment,etc., so there is a separate line for every serial number)Naturally, I would like to split this info into two tables..one thatdoes not contain the serial numbers and has a primary key on the"File_num" column, and another table that would contain just the"File_num" and "Serial_num" columns. That way I could relate themlater...but most importantly, it will give me a table where I can usethe "File_num" as my primary key.What would be the best way to import these two tables from one sourcetextfile? The other thing that gives me problems is that the textfile has no column names, and the first row is always blank.I'm very new to SQL and DTS and would appreciate any direction.Thanks,Larry- - - - - - - - - - - - - - - - - -"Forget it, Jake. It's Chinatown."
View 1 Replies
View Related
