I am trying to import a fixed width file where some of the numeric columns are empty. The columns in question are defined as integer columns (of varying sizes) and I am guessing that "empty" columns come across as multiple spaces on the import.
Even though I have "Retain null values from source" checked off, I am still receiving the following error on these empty columns:
Error: 0xC02020A1 at Input Data, Flat File Source [1]: Data conversion failed. The data conversion for column "ToContractExpiryYear" returned status value 2 and status text "The value could not be converted because of a potential loss of data.".
Error: 0xC0209029 at Input Data, Flat File Source [1]: The "output column "ToContractExpiryYear" (51)" failed because error code 0xC0209084 occurred, and the error row disposition on "output column "ToContractExpiryYear" (51)" specifies failure on error. An error occurred on the specified object of the specified component.
Error: 0xC0202092 at Input Data, Flat File Source [1]: An error occurred while processing file "\Nastinus-01ClearingDataOCC20060320ser2mst.20060317" on data row 1.
If it is truly the system treating the column as spaces (and not trimming the value), then the only solution I can think off is to source everything as strings, perform a transform that executes a Trim() (Derived Column or Script ??), THEN perform a transform that converts data types, then do whatever else I need...
Am I missing something? Is this the correct solution?
I am getting error Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. StackTrace> at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream) at System.Data.SqlClient.SqlCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior) at System.Data.Common.DbDataAdapter.Fill(Object data, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) at Galileo.Modules.Data.DBDeclare.RunProcedure(String sp, IDataParameter[] parameters) at GalileoModules.Data.PrivateAccomodation.Search3.Query(String[] values
Does anyone know of any SQL errors that will stop the SQLserve.exe service? I meant the error didn't hang the SQL server service, it stopped the service (from green light to red light).
Can somebody guive me alittle guidance in how to make this? I have like 4 lookups but some can throw errors, and I need to know what happened when I go to the office in the moorning.
My program use the mutil-threads, each thread would use AppendChunk to insert a binary file into sqlserver. But program always stopped exceptionally , But I can not catch any exception. It looks like be killed by someone or system.
I wanted to prevent ntbackup from locking my databases during the nightly backup, so I excluded the ...Data folder from the backup set. However, I think that ntbackup is backing up the databases during the volume shadow copy phase of the backup, even though their folder was excluded from the backup set (I verified this setting in the .bks file). Although the lock only lasts a few seconds, the error message is worrisome and I would prefer to skip the databases completely. How can I stop the volume shadow copy from doing this?
Below is the the sequence of events leading up to the error, most recent first:
Event Type: Error Event Source: SQLVDI Event Category: None Event ID: 1 Date: 3/23/2007 Time: 3:01:49 AM Description: SQLVDI: Loc=CVDS::Cleanup. Desc=Release(ClientAliveMutex). ErrorCode=(288)Attempt to release mutex not owned by caller. . Process=8684. Thread=7556. Client. Instance=. VD=.
Event Type: Information Event Source: MSSQLSERVER Event Category: (6) Event ID: 18264 Date: 3/23/2007 Time: 3:01:48 AM Description: Database backed up. Database: master, creation date(time): 2007/03/12(15:08:23), pages dumped: 1, first LSN: 268:352:37, last LSN: 269:24:1, number of dump devices: 1, device information: (FILE=1, TYPE=VIRTUAL_DEVICE: {'{66DC3082-FB76-4312-AD74-4BDAD9FC7209}1'}). This is an informational message only. No user action is required.
Event Type: Information Event Source: MSSQLSERVER Event Category: (2) Event ID: 3198 Date: 3/23/2007 Time: 3:01:47 AM Description: I/O was resumed on database master. No user action is required.
Event Type: Information Event Source: MSSQLSERVER Event Category: (2) Event ID: 3197 Date: 3/23/2007 Time: 3:01:45 AM Description: I/O is frozen on database master. No user action is required. However, if I/O is not resumed promptly, you could cancel the backup.
Hi.I have an ancient preCambrian app that uses the db library to interface withsql server databases.It is written in c++.When testing it I noticed on one machine with sql server 2005 installed itruns fine, but on another it has some problems, notably.. it gets as a resultof a select statement with an order by clause the error:only fully keyset ddriven cursors can have 'order by', 'group by', or 'having'phrases.Error code 10080Can someone suggest a 'configuration' parameter that might be causing theotherwise identical systems to have this problem on one machine and not theother?ThanksJeffthanksJeffJeff Kish
I have a report which has the Interactive Height set to 0 so that it does not use paging. When I try and print preview the report, I can see the report okay until I go forward after the last page, and then I get the error "An error occured trying to render the report. 0x80004005". I can print the report and it prints fine, but I get a pop-up that says that there was an error printing the report. I've narrowed it down to the interactive size property, but am not sure how to get around it.
At my job is a dts package that is failing in SQL 2005. I am not a SQLexpert. I am just trying to fix. I put the query in Query Analyzerand get this error:(4322 row(s) affected)Server: Msg 535, Level 16, State 1, Line 1Difference of two datetime columns caused overflow at runtime.I am just trying to understand what this means, what I should belooking for and what could be wrong. Here is the query:SELECT i.SerialNumber, '' AS mac_number, DATEDIFF([second], 'Jan 1,1970', s.DateOrdered) AS Support_StartDt, DATEDIFF([second], 'Jan 1,1970',s.Warranty_Enddate) AS Support_EndDt,DATEDIFF([second], 'Jan 1, 1970', c.Registration_Date) ASRegistration_Date, c.FirstName AS enduser_fname,c.LastName AS enduser_lname, c.CompanyName ASenduser_companyname, c.ContactEmail AS enduser_email, c.Address ASenduser_address1,c.Address2 AS enduser_address2, c.City ASenduser_city, c.State AS enduser_state, c.Zip AS enduser_zip,c.WorkPhone AS enduser_phone,c.Fax AS enduser_fax, d.DealerName ASdealer_companyname, d.ContactFirstName AS dealer_fname,d.ContactLastName AS dealer_name,d.Address1 AS dealer_address, d.City ASdealer_city, d.State AS dealer_state, d.Zip AS dealer_zip,d.ContactPhone AS dealer_phone,d.ContactFax AS dealer_fax,ISNULL(SUBSTRING(p.ProductName, 11, LEN(p.ProductName) - 10), 'unknownIWP product') AS product_type, '' AS extra1,'' AS extra2, '' AS extra3, '' AS extra4, '' ASextra5, '' AS extra6, '' AS extra7FROM tblInventory i full outer JOINtblDealers d ON i.DealerID = d.DealerID fullOUTER JOINtblSupport s ON i.InventoryID = s.InventoryIDfull outer JOINtblCustomers c ON s.InventoryID = c.InventoryIDLEFT OUTER JOINtblProducts p ON LEFT(i.SerialNumber,PATINDEX('%-%', i.SerialNumber)) = p.SerialPrefixWHERE i.SerialNumber <> ''Any ideas would be greatly appreciated.
Hi, I test the following sql statement, finding that an error ocurs:
Msg 7630, Level 15, State 2, Line 3 Syntax error near '"' in the full-text search condition '"dsg SDRGDG " OR "sdfsdfsdfsdafdsafdsfds'.
DECLARE @searchTerm NVARCHAR(40) SET @searchTerm = '"dsg SDRGDG " OR "sdfsdfsdfsdafdsafdsfdsafdsafdsafsafdfdsafdf"'; SELECT [JobTitle], [JobDes], [OpenDate], j.[URLRef], c.[CompanyName], c.[URLRef], c.[URLSource] FROM JobWanted AS j INNER JOIN Company AS c ON c.CompanyID = j.CompanyID WHERE CONTAINS((JobTitle, JobDes), @searchTerm)
It seems too lengthy string will cause an error for full-text engine. I find the sdfsdfsdfsdafdsafdsfdsafdsafdsafsafdfdsafdf is truncated as shown in error message.
How to avoid this issue? Could I configre this limination?
When I call ExecuteResultSet(SqlServerCe.ResultSetOptions.Scrollable) I am getting the following error when the data type is Numeric(18, 4): Expression evaluation caused an overflow. [ Name of function (if known) = ]
The numbers involved are not that big and work fine when ExecuteReader() or ExecuteResultSet(SqlServerCe.ResultSetOptions.None) are called on the same SQL.
Any ideas? Thanks in advance!
Cheers, Dave
Code: Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click Dim errorDescription As String = String.Empty Dim numericNumber As String = String.Empty Try Using sqlCE As New System.Data.SqlServerCe.SqlCeConnection("Data Source = '" & My.Application.Info.DirectoryPath & "MyDatabase.sdf';")
sqlCE.Open()
Dim sqlCECommand As SqlServerCe.SqlCeCommand = sqlCE.CreateCommand() sqlCECommand.CommandText = "SELECT SUM(MT.TPM_Measure1) AS CurrentAmount FROM BUS_Table MT"
Dim reader As System.Data.IDataReader = Nothing If RadioButton1.Checked Then reader = sqlCECommand.ExecuteReader() 'Works fine ElseIf RadioButton2.Checked Then reader = sqlCECommand.ExecuteResultSet(SqlServerCe.ResultSetOptions.None) 'Works fine Else reader = sqlCECommand.ExecuteResultSet(SqlServerCe.ResultSetOptions.Scrollable) 'Causes the error! End If
If reader.Read() Then numericNumber = reader(0).ToString() End If
reader.Close() reader.Dispose() End Using Catch ex As Exception errorDescription = ex.Message Finally Me.lblError.Text = errorDescription Me.lblNumeric.Text = numericNumber End Try End Sub
TPM_Measure1 datatype is Numeric(18,4)
When the above query works the value is: 4053723.6300
Hi,I need some help. I am getting this error after I complete the asp.net register control and click on the continue button. It crashed when it tries to get it calls this Profile property((string)(this.GetPropertyValue("Address1")));When I look at the stack, it is coming from my ProfileWrapper class which adds user address, city, etc.. from a class which inherits fromSystem.Web.Profile.ProfileBase. From the stack, it is calling the System.Web.Profile and crashed when it tries to open a connection atSystem.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject). I already migrated all aspnet_user, aspnet_roles, etc.. and don't get any connection errors. It is only when I try to get the profile data. This works on my pc, but throws an error on my lunarpage website.Any help is greatly appreciated.Thanks,AJAn error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:Line 100: public virtual string Address2 {Line 101: get {Line 102: return ((string)(this.GetPropertyValue("Address2")));Line 103: }Line 104: set {Source File: c:windowsMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files oot 021d50639a6858cApp_Code.54nvluyo.1.cs Line: 102Stack Trace:[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)] System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +435 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84 System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197 System.Web.Profile.SqlProfileProvider.GetPropertyValuesFromDatabase(String userName, SettingsPropertyValueCollection svc) +782 System.Web.Profile.SqlProfileProvider.GetPropertyValues(SettingsContext sc, SettingsPropertyCollection properties) +428 System.Configuration.SettingsBase.GetPropertiesFromProvider(SettingsProvider provider) +404 System.Configuration.SettingsBase.GetPropertyValueByName(String propertyName) +117 System.Configuration.SettingsBase.get_Item(String propertyName) +89 System.Web.Profile.ProfileBase.GetInternal(String propertyName) +36 System.Web.Profile.ProfileBase.get_Item(String propertyName) +68 System.Web.Profile.ProfileBase.GetPropertyValue(String propertyName) +4 ProfileCommon.get_Address2() in c:windowsMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files oot 021d50639a6858cApp_Code.54nvluyo.1.cs:102 ProfileWrapper..ctor() in d:inetpubvhostsjavcentral.comhttpdocsApp_CodeProfileWrapper.cs:242 ProfileDataSource.GetData() in d:inetpubvhostsjavcentral.comhttpdocsApp_CodeProfileDataSource.cs:17[TargetInvocationException: Exception has been thrown by the target of an invocation.] System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) +0 System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) +72 System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks) +308 System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) +29 System.Web.UI.WebControls.ObjectDataSourceView.InvokeMethod(ObjectDataSourceMethod method, Boolean disposeInstance, Object& instance) +480 System.Web.UI.WebControls.ObjectDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1960 System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +17 System.Web.UI.WebControls.DataBoundControl.PerformSelect() +149 System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70 System.Web.UI.WebControls.FormView.DataBind() +4 System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82 System.Web.UI.WebControls.FormView.EnsureDataBound() +163 System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +69 System.Web.UI.Control.EnsureChildControls() +87 System.Web.UI.Control.FindControl(String id, Int32 pathOffset) +21 System.Web.UI.Control.FindControl(String id) +9 CustomerDetailsEdit.OnPreRender(EventArgs e) in d:inetpubvhostsjavcentral.comhttpdocsUserControlsCustomerDetailsEdit.ascx.cs:60 System.Web.UI.Control.PreRenderRecursiveInternal() +86 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2041
Our SQL 2008 R2 relational database has tables with foreign key relationships for part numbers. We receive production data from a separate program and we need to import the CSV data into our database application.
The problem is our separate program creates a CSV file with the actual part number "362S162-33". In our database we have a separate parts table (example: 362S162-33 has identity "15").
We need to import data into a production table that has a "part number" (FK) column.
How can we, when importing, cross-reference the "parts table" to convert the part number to the identity number. We have thousands of parts, so we need this change of part number column to the FK identity automatically on import.
Production Table: idComponent (PK), [1000] ComponentName, [Assembly108] idPartNumber (FK), [15] ComponentLength, [230.5] UserMessage, [Assembly is 230.5 inches using 362S162-33] Qty; [1]
Recently installed Sql Server 2005 client and am now attempting to import data from a spreadsheet into an existing table. This works fine with Sql Server 2000 but I am getting data conversion truncation errors that stop the process when this runs using import utility in Sql Server 2005.
I am using Advantage ODBC 6.2 to connect to a Advantage Data Server to push data from a SQL table into this server. I can view the data from the ADS with DTS and I can insert data by using "Insert into TempTable ("Last Name","First Name") values ('test','test)" from a Execute SQL Statement. The issue is when I build up a DTS package to pull from SQL into the Advantage ODBC, I get a "missing closing ")"" error. I have narrowed it down to the column names in the destination table having spaces (Last Name, First Name, and a bunch of others. DBA 101 here). How do I beat this?
I have tried editing the destination column names in disconnected edit by adding the double quotes but get a "Column Name '"Last Name"' not found" error. Wrapping them with [] doesn't work. I think this is a limit on Advantage.
When I try to use Advantage OLE DB, I get an 'Ace32.dll must be newer then the other dll" error. I am afraid of upgrading Ace32.dll and not break other things.
So with this said my two questions:
How do I get the destniation column names wrapped in double quotes when using transformations?
or
Is there a way I can do an Insert into Advantage connection(column names) values (Select Values from SQL Server connection)?
I am trying to simplify a query given to me by one of my collegues written using the query designer of Access. Looking at the query there seem to be some syntax differences, so to see if this was the case I thought I would import the database to my SQL Server Developer edition.
I tried to start the wizard from within SQL Server Management Studio Express as shown in one of the articles on MSDN which did not work, but the manual method also suggested did work.
Trouble is that it gets most of the way through the import until it spews forth the following error messages:
- Prepare for Execute (Error) Messages Error 0xc0202009: {332B4EB1-AF51-4FFF-A3C9-3AEE594FCB11}: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Could not start session. Too many sessions already active.". (SQL Server Import and Export Wizard)
Error 0xc020801c: Data Flow Task: The AcquireConnection method call to the connection manager "SourceConnectionOLEDB" failed with error code 0xC0202009. (SQL Server Import and Export Wizard)
Error 0xc004701a: Data Flow Task: component "Source 33 - ATable" (2065) failed the pre-execute phase and returned error code 0xC020801C. (SQL Server Import and Export Wizard).
There does not seem to be any method of specifying a number of sessions, so I don't see how to get round the problem.
Does anyone know how I can get the import to work?
when trying to Ãmport files to our database server from a client, I keep getting an error:
- Validating (Error) Messages Error 0xc00470fe: Data Flow Task: The product level is insufficient for component "Source_txt" (1). (SQL Server Import and Export Wizard)
Error 0xc00470fe: Data Flow Task: The product level is insufficient for component "Data Conversion 1" (175). (SQL Server Import and Export Wizard)
... doing the same import when logged on the server, hasn't been giving me any errors, how come. I can from my client without trouble import tables from other DB servers but when ever it is files it won't do it.
I tried as mentioned in other threads rerun setup to re-install SSIS, but as it was already installed it wouldn't re-install. My next move would be to make a clean install, but not sure it would help, as I think this is a buck.
My site works fine in VWD2008 express, but I get this error when I try to use it on my live website. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. According to this article: http://support.microsoft.com/kb/914277 I am supposed to:
1. Click Start, point to Programs, point to Microsoft SQL Server 2005, point to Configuration Tools, and then click SQL Server Surface Area Configuration. Ok, there is no such program in this folder. The only thing in there is "SQL Server Error and Usage Reporting"... The other thing I am greatly concerned with is this: All is want is for my webpages to be able to access my database for user authentication. I DO NOT want to grant the internet rights to remote connect to my database.
I get the following error and have been trying to figure out why I keep getting it. Initially, I had placed my project under wwwroot folder and ran it under IIS and it gave this error. Then I moved it to my local C drive and same thing. I am sharing this project with two other co-workers and all our config files and code files are same...they don't get this error but I do. I checked that SQL Server Client Network Utility has TCP/IP and the 'Named Pipes' enabled. I thought maybe I have setting in the Visual Studio 2005 that I'm not aware of that's causing this problem...it can't be the server since my co-workers aren't having this error and can't be anything in the code since all of us are sharing this project through vss. I dont' think using different version of .net framework can create this error. I changed the version from 2.0 to use 1.1x and it gave same error... Any help would be greatly appreciated. Thanks in advance.
Server Error in '/RBOdev' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +739123 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188 System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +685966 System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +109 System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +383 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84 System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197 System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.GetConnectionHolder() +16 System.Web.UI.WebControls.WebParts.SqlPersonalizationProvider.LoadPersonalizationBlobs(WebPartManager webPartManager, String path, String userName, Byte[]& sharedDataBlob, Byte[]& userDataBlob) +195 System.Web.UI.WebControls.WebParts.PersonalizationProvider.LoadPersonalizationState(WebPartManager webPartManager, Boolean ignoreCurrentUser) +95 System.Web.UI.WebControls.WebParts.WebPartPersonalization.Load() +105 System.Web.UI.WebControls.WebParts.WebPartManager.OnInit(EventArgs e) +497 System.Web.UI.Control.InitRecursive(Control namingContainer) +321 System.Web.UI.Control.InitRecursive(Control namingContainer) +198 System.Web.UI.Control.InitRecursive(Control namingContainer) +198 System.Web.UI.Control.InitRecursive(Control namingContainer) +198 System.Web.UI.Control.InitRecursive(Control namingContainer) +198 System.Web.UI.Control.InitRecursive(Control namingContainer) +198 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +692
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
Hi , I am struck with one issue.Plz help me out if you have any solution for this one. Details Front End - Visual Studio 2005 Back End -SQL Server 2000 (Remote database) Error i am getting is {System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open() at dbcAccess.clsSQL.GetConnect() in C:Documents and SettingskerlsgMy DocumentsVisual Studio 2005ProjectsdbcAccessdbcAccessclsSQL.cs:line 296}
{System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
i have a weird situation here, i tried to load a unicode file with a flat file source component, one of file lines has data like any other line but also contains the character "ÿ" which i can't see or find it and replace it with empty string, the source component parses the line correctly but if there is a data type error in this line, the error output for that line gives me this character "ÿ" instead of the original line.
simply, the error output of flat file source component fail to get the original line when the line contains hidden "ÿ".
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,
Hi,I have SQL Server Express Edition. I tried working out some ASP.NET Labs in my local system. Here is the link of the Virtual Lab which I tried. http://msevents.microsoft.com/CUI/WebCastEventDetails.aspx?EventID=1032286906&EventCategory=3&culture=en-US&CountryCode=USI recieve this error in my local system. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)I tried working out solutions from various websites. But the no solution is effective. Could anyone help me in solving this issue.
here is my code the falue of pr_h_reqby is "Test" Dim strconn As New SqlConnection(connstring) Dim myReqdata As New DataSet Dim mycommand As SqlDataAdapter Dim sqlstr As String = "select pr_H_reqby from tbl_pr_header where pr_h_recid = " & recid & "" mycommand = New SqlDataAdapter(sqlstr, strconn) mycommand.Fill(myReqdata, "mydata") If myReqdata.Tables(0).Rows.Count > 0 Then 'lblReqID.Text = myReqdata.Tables(0).Rows("reqid").ToString lblNameVal.Text = myReqdata.Tables("mydata").Rows("pr_H_reqby").ToString() lblEmailVal.Text = myReqdata.Tables("mydata").Rows("pr_h_reqemail").ToString() lblReqDateVal.Text = myReqdata.Tables("mydata").Rows("pr_h_reqdate").ToString() lblneedval.Text = myReqdata.Tables("mydata").Rows("pr_h_needdt").ToString() lblDeptval.Text = myReqdata.Tables("mydata").Rows("pr_h_dept").ToString() txtbxReqDesc.Text = myReqdata.Tables("mydata").Rows("pr_h_projdesc").ToString() End If
Hi,I have SQL Server Express Edition. I tried working out some ASP.NET Labs in my local system. Here is the link of the Virtual Lab which I tried. http://msevents.microsoft.com/CUI/WebCastEventDetails.aspx?EventID=1032286906&EventCategory=3&culture=en-US&CountryCode=USI recieve this error in my local system. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)I tried working out solutions from various websites. But the no solution is effective. Could anyone help me in solving this issue.
[Source - chn_employee_vew_test_txt [1]] Error: Data conversion failed. The data conversion for column "Column 42" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
[Source - chn_employee_vew_test_txt [1]] Error: The "output column "Column 42" (136)" failed because truncation occurred, and the truncation row disposition on "output column "Column 42" (136)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
I using Locale (People's Republic of China) and code page of 936 (Simplied Chinese GBK) with header row delimiter {CR}{LF}.
I am using flat file import method.
Whenever the server process the Column 42 with value "11,Nanjing Rd.W, China" which contain 'comma' or '.' it will hit error importing with above message. When i manually change the column value to non comma or '.' (11 Nanjing Rd W China) in the flat file it is ok.
I am using SQL server 2005.
Please advise what need to be done to avoid this error ?
Thanks in advance and any idea or suggestion is very much appreciated as i have try to solve this issue for over a week but still not able to find any answer on it.
[Source - chn_employee_vew_test_txt [1]] Error: Data conversion failed. The data conversion for column "Column 42" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
[Source - chn_employee_vew_test_txt [1]] Error: The "output column "Column 42" (136)" failed because truncation occurred, and the truncation row disposition on "output column "Column 42" (136)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
I using Locale (People's Republic of China) and code page of 936 (Simplied Chinese GBK) with header row delimiter {CR}{LF}.
I am using flat file import method.
Whenever the server process the Column 42 with value "11,Nanjing Rd.W, China" which contain 'comma' or '.' it will hit error importing with above message. When i manually change the column value to non comma or '.' (11 Nanjing Rd W China) in the flat file it is ok.
I am using SQL server 2005.
Please advise what need to be done to avoid this error ?
Thanks in advance and any idea or suggestion is very much appreciated as i have try to solve this issue for over a week but still not able to find any answer on it.
Hi,I keep getting the error:System.Data.SqlClient.SqlException: Conversion failed when converting the varchar value '@qty' to data type int. When I initiate the insert and update.I tried adding a: Convert.ToInt32(TextBox1.Text), but it didn't work.. I also tried fiddling with the update code, but I think it is to do with the insert bool as the update works at the moment.. Could someone help?My code:private bool ExecuteUpdate(int quantity){ SqlConnection con = new SqlConnection(); con.ConnectionString = "Data Source=.\SQLEXPRESS;AttachDbFilename=|DataDirectory|\ASPNETDB.MDF;Integrated Security=True;User Instance=True"; con.Open(); SqlCommand command = new SqlCommand(); command.Connection = con; TextBox TextBox1 = (TextBox)FormView1.FindControl("TextBox1"); Label labname = (Label)FormView1.FindControl("Label3"); Label labid = (Label)FormView1.FindControl("Label13"); command.CommandText = "UPDATE Items SET Quantityavailable = Quantityavailable - '@qty' WHERE productID=@productID"; command.Parameters.Add("@qty", TextBox1.Text); command.Parameters.Add("@productID", labid.Text); command.ExecuteNonQuery(); con.Close(); return true;} private bool ExecuteInsert(String quantity) { SqlConnection con = new SqlConnection(); con.ConnectionString = "Data Source=.\SQLEXPRESS;AttachDbFilename=|DataDirectory|\ASPNETDB.MDF;Integrated Security=True;User Instance=True"; con.Open(); SqlCommand command = new SqlCommand(); command.Connection = con; TextBox TextBox1 = (TextBox)FormView1.FindControl("TextBox1"); Label labname = (Label)FormView1.FindControl("Label3"); Label labid = (Label)FormView1.FindControl("Label13"); command.CommandText = "INSERT INTO Transactions (Usersname,Itemid,itemname,Date,Qty) VALUES (@User,@productID,@Itemsname,@date,@qty)"; command.Parameters.Add("@User", System.Web.HttpContext.Current.User.Identity.Name); command.Parameters.Add("@Itemsname", labname.Text); command.Parameters.Add("@productID", labid.Text); command.Parameters.Add("@qty", Convert.ToInt32(TextBox1.Text)); command.Parameters.Add("@date", DateTime.Now.ToString()); command.ExecuteNonQuery(); con.Close(); return true; }protected void Button2_Click(object sender, EventArgs e){ TextBox TextBox1 = FormView1.FindControl("TextBox1") as TextBox; ExecuteUpdate(Int32.Parse(TextBox1.Text) );}protected void Button2_Command(object sender, CommandEventArgs e) { if (e.CommandName == "Update") { TextBox TextBox1 = FormView1.FindControl("TextBox1") as TextBox; ExecuteInsert(TextBox1.Text); } } Thanks so much if someone can!Jon
Please help.I have an aspx page with a drop down list(ddlCategories), and a datalist(dlLinks). The drop down lists data property is a uniqueidentifier from a table.When an item in the list is selected it fires the following:SqlLinks.SelectParameters("CategoryID").DefaultValue = ddlCategories.SelectedValuedlLinks.DataBind()The sqldatasource for the datalist runs a stored procedure (below)sp_GetLinks (@CategoryID ?) ASselect * from links where category = @categoryMy question is, what should @Category be declared as if the category column in the table is a uniqueidentifier? And what conversion do I need to do I just can't work it out, as I keep getting the following error:Implicit conversion from data type sql_variant to uniqueidentifier is not allowed. Use the CONVERT function to run this query. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Implicit conversion from data type sql_variant to uniqueidentifier is not allowed. Use the CONVERT function to run this query.Source Error:
Line 5: Protected Sub DropDownList1_SelectedIndexChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles ddlCategories.SelectedIndexChangedLine 6: SqlLinks.SelectParameters("CategoryID").DefaultValue = ddlCategories.SelectedValueLine 7: dlLinks.DataBind()Line 8: End SubLine 9: End ClassSource File: C:Documents and SettingsKarl WallsMy DocumentsMy WebsAFRAlinks.aspx.vb Line: 7 Stack Trace:
This is the error message I get: :( Server: Msg 242, Level 16, State 3, Line 1 The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
This is the query: Select Qual_ins.CompanyCode, Qual_ins.ParticipantCode, Qual_ins.Ins_Code, Qual_ins.Plan_Code, dbo.PremiumRate(Qual_Ins.Crit,Qual_Ins.PQB_Spec,Pl an_Mas.Extend_Fee, Qual_Ins.Adjpremium,Qual_Ins.Adjpremiumper,Qual_In s.Adjpremend, GetDate(),Qual_Ins.Cover_Amt, Plan_Mas.CR_A, Plan_Mas.CR_B, Plan_Mas.CR_C, Plan_Mas.CR_D, Plan_Mas.CR_E, Plan_Mas.CR_F, Plan_Mas.CR_G, Plan_Mas.CR_H, Plan_Mas.CR_I, Plan_Mas.CR_J, Plan_Mas.CR_K, Plan_Mas.CR_L, Plan_Mas.CR_M, Plan_Mas.CR_N, Plan_Mas.CR_O) AS PremiumRate FROM Qual_ins, Plan_Mas WHERE Qual_Ins.CompanyCode = 'ACME' AND Qual_ins.ParticipantCode = 4 AND Plan_Mas.CompanyCode = Qual_ins.CompanyCode AND Plan_Mas.Ins_Code = Qual_ins.Ins_Code AND Plan_Mas.Plan_Code = Qual_ins.Plan_Code Order BY Qual_ins.Ins_Code
Please let me know if you need to see my PremiumRate (User Defined Function) in order to help me elimate this error message. Any help is appreciate! I'm new to this.... "Hello" to all!
